mirror of
https://xff.cz/git/u-boot/
synced 2025-09-03 01:32:47 +02:00
e18fb7dd5c
Some Texas Instruments K3 family of SoCs have one of more Digital Signal Processor (DSP) subsystems that are comprised of either a TMS320C66x CorePac and/or a next-generation TMS320C71x CorePac processor subsystem. Add the device tree bindings document for the C66x DSP devices on these SoCs. The added example illustrates the DT nodes for the first C66x DSP device present on the K3 J721E family of SoCs. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.