mirror of
https://xff.cz/git/u-boot/
synced 2026-01-24 23:45:21 +01:00
e6e82ce24d
Based on rock-3a-rk3568_defconfig. Tested on v1.31 revision. Board Specifications: - Rockchip RK3566 - 1/2/4GB LPDDR4 2112MT/s - eMMC socket - uSD card slot - M.2 2230 Connector - GbE LAN with POE - 3.5mm jack with mic - HDMI 2.0, MIPI DSI/CSI - USB 3.0 Host, USB 2.0 Host/OTG - 40-pin GPIO expansion ports Signed-off-by: Maxim Moskalets <maximmosk4@gmail.com> Suggested-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Tested-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.