mirror of
https://xff.cz/git/u-boot/
synced 2025-10-31 02:15:45 +01:00
13ea307f79
Under DM, we rely on u-boot's device tree to provide the correct PHY addresses. The board_fix_fdt callback is intended to be used for device tree fixups before relocation. Unfortunately, this isn't an option when booting from flash since the device tree isn't writable before relocation. This patch introduces the CONFIG_T2080RDB_REV_D option to signal that a board revision D or up is the target. The config option is used to set the correct Aquantia PHY address in the board's u-boot device tree. Defconfig files with the option enable explicitly are added for convenience. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
115 lines
1.9 KiB
Plaintext
115 lines
1.9 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
|
/*
|
|
* T2080RDB Device Tree Source
|
|
*
|
|
* Copyright 2013 - 2015 Freescale Semiconductor Inc.
|
|
* Copyright 2019-2021 NXP
|
|
*/
|
|
|
|
/include/ "t2080.dtsi"
|
|
|
|
/ {
|
|
model = "fsl,T2080RDB";
|
|
compatible = "fsl,T2080RDB";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
|
|
aliases {
|
|
spi0 = &espi0;
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
fman@400000 {
|
|
ethernet@e0000 {
|
|
phy-handle = <&xg_aq1202_phy3>;
|
|
phy-connection-type = "xgmii";
|
|
};
|
|
|
|
ethernet@e2000 {
|
|
phy-handle = <&xg_aq1202_phy4>;
|
|
phy-connection-type = "xgmii";
|
|
};
|
|
|
|
ethernet@e4000 {
|
|
phy-handle = <&rgmii_phy1>;
|
|
phy-connection-type = "rgmii";
|
|
};
|
|
|
|
ethernet@e6000 {
|
|
phy-handle = <&rgmii_phy2>;
|
|
phy-connection-type = "rgmii";
|
|
};
|
|
|
|
ethernet@f0000 {
|
|
phy-handle = <&xg_cs4315_phy2>;
|
|
phy-connection-type = "xgmii";
|
|
};
|
|
|
|
ethernet@f2000 {
|
|
phy-handle = <&xg_cs4315_phy1>;
|
|
phy-connection-type = "xgmii";
|
|
};
|
|
|
|
mdio@fc000 {
|
|
rgmii_phy1: ethernet-phy@1 {
|
|
reg = <0x1>;
|
|
};
|
|
rgmii_phy2: ethernet-phy@2 {
|
|
reg = <0x2>;
|
|
};
|
|
};
|
|
|
|
mdio@fd000 {
|
|
xg_cs4315_phy1: ethernet-phy@c {
|
|
compatible = "ethernet-phy-id13e5.1002";
|
|
reg = <0xc>;
|
|
};
|
|
|
|
xg_cs4315_phy2: ethernet-phy@d {
|
|
compatible = "ethernet-phy-id13e5.1002";
|
|
reg = <0xd>;
|
|
};
|
|
|
|
xg_aq1202_phy3: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <0x0>;
|
|
};
|
|
|
|
#ifdef CONFIG_T2080RDB_REV_D
|
|
xg_aq1202_phy4: ethernet-phy@8 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <0x8>;
|
|
};
|
|
#else
|
|
xg_aq1202_phy4: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <0x1>;
|
|
};
|
|
#endif
|
|
};
|
|
};
|
|
};
|
|
|
|
&espi0 {
|
|
status = "okay";
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor"; /* 16MB */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>; /* input clock */
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
rtc@68 {
|
|
compatible = "dallas,ds1339";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
/include/ "t2080si-post.dtsi"
|