mirror of
				https://xff.cz/git/u-boot/
				synced 2025-10-31 02:15:45 +01:00 
			
		
		
		
	The following commit introduced some warnings associated with using
pci_addr_t instead of a proper 32-bit data type.
commit af778c6d9e
Author: Andrew Sharp <andywyse6@gmail.com>
Date:   Wed Aug 1 12:27:16 2012 +0000
    pci: fix errant data types and corresponding access functions
On some platforms pci_addr_t is defined as a 64-bit data type so its not
proper to use with pci_{read,write}_config_dword.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
		
	
		
			
				
	
	
		
			741 lines
		
	
	
		
			18 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			741 lines
		
	
	
		
			18 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 | |
|  * Andreas Heppel <aheppel@sysgo.de>
 | |
|  *
 | |
|  * (C) Copyright 2002, 2003
 | |
|  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 | |
|  *
 | |
|  * See file CREDITS for list of people who contributed to this
 | |
|  * project.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or
 | |
|  * modify it under the terms of the GNU General Public License as
 | |
|  * published by the Free Software Foundation; either version 2 of
 | |
|  * the License, or (at your option) any later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  * GNU General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 | |
|  * MA 02111-1307 USA
 | |
|  */
 | |
| 
 | |
| /*
 | |
|  * PCI routines
 | |
|  */
 | |
| 
 | |
| #include <common.h>
 | |
| 
 | |
| #include <command.h>
 | |
| #include <asm/processor.h>
 | |
| #include <asm/io.h>
 | |
| #include <pci.h>
 | |
| 
 | |
| #define PCI_HOSE_OP(rw, size, type)					\
 | |
| int pci_hose_##rw##_config_##size(struct pci_controller *hose,		\
 | |
| 				  pci_dev_t dev,			\
 | |
| 				  int offset, type value)		\
 | |
| {									\
 | |
| 	return hose->rw##_##size(hose, dev, offset, value);		\
 | |
| }
 | |
| 
 | |
| PCI_HOSE_OP(read, byte, u8 *)
 | |
| PCI_HOSE_OP(read, word, u16 *)
 | |
| PCI_HOSE_OP(read, dword, u32 *)
 | |
| PCI_HOSE_OP(write, byte, u8)
 | |
| PCI_HOSE_OP(write, word, u16)
 | |
| PCI_HOSE_OP(write, dword, u32)
 | |
| 
 | |
| #define PCI_OP(rw, size, type, error_code)				\
 | |
| int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value)	\
 | |
| {									\
 | |
| 	struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev));	\
 | |
| 									\
 | |
| 	if (!hose)							\
 | |
| 	{								\
 | |
| 		error_code;						\
 | |
| 		return -1;						\
 | |
| 	}								\
 | |
| 									\
 | |
| 	return pci_hose_##rw##_config_##size(hose, dev, offset, value);	\
 | |
| }
 | |
| 
 | |
| PCI_OP(read, byte, u8 *, *value = 0xff)
 | |
| PCI_OP(read, word, u16 *, *value = 0xffff)
 | |
| PCI_OP(read, dword, u32 *, *value = 0xffffffff)
 | |
| PCI_OP(write, byte, u8, )
 | |
| PCI_OP(write, word, u16, )
 | |
| PCI_OP(write, dword, u32, )
 | |
| 
 | |
| #define PCI_READ_VIA_DWORD_OP(size, type, off_mask)			\
 | |
| int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\
 | |
| 					pci_dev_t dev,			\
 | |
| 					int offset, type val)		\
 | |
| {									\
 | |
| 	u32 val32;							\
 | |
| 									\
 | |
| 	if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) {	\
 | |
| 		*val = -1;						\
 | |
| 		return -1;						\
 | |
| 	}								\
 | |
| 									\
 | |
| 	*val = (val32 >> ((offset & (int)off_mask) * 8));		\
 | |
| 									\
 | |
| 	return 0;							\
 | |
| }
 | |
| 
 | |
| #define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask)		\
 | |
| int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\
 | |
| 					     pci_dev_t dev,		\
 | |
| 					     int offset, type val)	\
 | |
| {									\
 | |
| 	u32 val32, mask, ldata, shift;					\
 | |
| 									\
 | |
| 	if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\
 | |
| 		return -1;						\
 | |
| 									\
 | |
| 	shift = ((offset & (int)off_mask) * 8);				\
 | |
| 	ldata = (((unsigned long)val) & val_mask) << shift;		\
 | |
| 	mask = val_mask << shift;					\
 | |
| 	val32 = (val32 & ~mask) | ldata;				\
 | |
| 									\
 | |
| 	if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\
 | |
| 		return -1;						\
 | |
| 									\
 | |
| 	return 0;							\
 | |
| }
 | |
| 
 | |
| PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03)
 | |
| PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02)
 | |
| PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff)
 | |
| PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff)
 | |
| 
 | |
| /* Get a virtual address associated with a BAR region */
 | |
| void *pci_map_bar(pci_dev_t pdev, int bar, int flags)
 | |
| {
 | |
| 	pci_addr_t pci_bus_addr;
 | |
| 	u32 bar_response;
 | |
| 
 | |
| 	/* read BAR address */
 | |
| 	pci_read_config_dword(pdev, bar, &bar_response);
 | |
| 	pci_bus_addr = (pci_addr_t)(bar_response & ~0xf);
 | |
| 
 | |
| 	/*
 | |
| 	 * Pass "0" as the length argument to pci_bus_to_virt.  The arg
 | |
| 	 * isn't actualy used on any platform because u-boot assumes a static
 | |
| 	 * linear mapping.  In the future, this could read the BAR size
 | |
| 	 * and pass that as the size if needed.
 | |
| 	 */
 | |
| 	return pci_bus_to_virt(pdev, pci_bus_addr, flags, 0, MAP_NOCACHE);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  *
 | |
|  */
 | |
| 
 | |
| static struct pci_controller* hose_head;
 | |
| 
 | |
| void pci_register_hose(struct pci_controller* hose)
 | |
| {
 | |
| 	struct pci_controller **phose = &hose_head;
 | |
| 
 | |
| 	while(*phose)
 | |
| 		phose = &(*phose)->next;
 | |
| 
 | |
| 	hose->next = NULL;
 | |
| 
 | |
| 	*phose = hose;
 | |
| }
 | |
| 
 | |
| struct pci_controller *pci_bus_to_hose(int bus)
 | |
| {
 | |
| 	struct pci_controller *hose;
 | |
| 
 | |
| 	for (hose = hose_head; hose; hose = hose->next) {
 | |
| 		if (bus >= hose->first_busno && bus <= hose->last_busno)
 | |
| 			return hose;
 | |
| 	}
 | |
| 
 | |
| 	printf("pci_bus_to_hose() failed\n");
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr)
 | |
| {
 | |
| 	struct pci_controller *hose;
 | |
| 
 | |
| 	for (hose = hose_head; hose; hose = hose->next) {
 | |
| 		if (hose->cfg_addr == cfg_addr)
 | |
| 			return hose;
 | |
| 	}
 | |
| 
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| int pci_last_busno(void)
 | |
| {
 | |
| 	struct pci_controller *hose = hose_head;
 | |
| 
 | |
| 	if (!hose)
 | |
| 		return -1;
 | |
| 
 | |
| 	while (hose->next)
 | |
| 		hose = hose->next;
 | |
| 
 | |
| 	return hose->last_busno;
 | |
| }
 | |
| 
 | |
| pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
 | |
| {
 | |
| 	struct pci_controller * hose;
 | |
| 	u16 vendor, device;
 | |
| 	u8 header_type;
 | |
| 	pci_dev_t bdf;
 | |
| 	int i, bus, found_multi = 0;
 | |
| 
 | |
| 	for (hose = hose_head; hose; hose = hose->next) {
 | |
| #ifdef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
 | |
| 		for (bus = hose->last_busno; bus >= hose->first_busno; bus--)
 | |
| #else
 | |
| 		for (bus = hose->first_busno; bus <= hose->last_busno; bus++)
 | |
| #endif
 | |
| 			for (bdf = PCI_BDF(bus, 0, 0);
 | |
| #if defined(CONFIG_ELPPC) || defined(CONFIG_PPMC7XX)
 | |
| 			     bdf < PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1,
 | |
| 				PCI_MAX_PCI_FUNCTIONS - 1);
 | |
| #else
 | |
| 			     bdf < PCI_BDF(bus + 1, 0, 0);
 | |
| #endif
 | |
| 			     bdf += PCI_BDF(0, 0, 1)) {
 | |
| 				if (!PCI_FUNC(bdf)) {
 | |
| 					pci_read_config_byte(bdf,
 | |
| 							     PCI_HEADER_TYPE,
 | |
| 							     &header_type);
 | |
| 
 | |
| 					found_multi = header_type & 0x80;
 | |
| 				} else {
 | |
| 					if (!found_multi)
 | |
| 						continue;
 | |
| 				}
 | |
| 
 | |
| 				pci_read_config_word(bdf,
 | |
| 						     PCI_VENDOR_ID,
 | |
| 						     &vendor);
 | |
| 				pci_read_config_word(bdf,
 | |
| 						     PCI_DEVICE_ID,
 | |
| 						     &device);
 | |
| 
 | |
| 				for (i = 0; ids[i].vendor != 0; i++) {
 | |
| 					if (vendor == ids[i].vendor &&
 | |
| 					    device == ids[i].device) {
 | |
| 						if (index <= 0)
 | |
| 							return bdf;
 | |
| 
 | |
| 						index--;
 | |
| 					}
 | |
| 				}
 | |
| 			}
 | |
| 	}
 | |
| 
 | |
| 	return -1;
 | |
| }
 | |
| 
 | |
| pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index)
 | |
| {
 | |
| 	static struct pci_device_id ids[2] = {{}, {0, 0}};
 | |
| 
 | |
| 	ids[0].vendor = vendor;
 | |
| 	ids[0].device = device;
 | |
| 
 | |
| 	return pci_find_devices(ids, index);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  *
 | |
|  */
 | |
| 
 | |
| int __pci_hose_phys_to_bus(struct pci_controller *hose,
 | |
| 				phys_addr_t phys_addr,
 | |
| 				unsigned long flags,
 | |
| 				unsigned long skip_mask,
 | |
| 				pci_addr_t *ba)
 | |
| {
 | |
| 	struct pci_region *res;
 | |
| 	pci_addr_t bus_addr;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < hose->region_count; i++) {
 | |
| 		res = &hose->regions[i];
 | |
| 
 | |
| 		if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0)
 | |
| 			continue;
 | |
| 
 | |
| 		if (res->flags & skip_mask)
 | |
| 			continue;
 | |
| 
 | |
| 		bus_addr = phys_addr - res->phys_start + res->bus_start;
 | |
| 
 | |
| 		if (bus_addr >= res->bus_start &&
 | |
| 			bus_addr < res->bus_start + res->size) {
 | |
| 			*ba = bus_addr;
 | |
| 			return 0;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 1;
 | |
| }
 | |
| 
 | |
| pci_addr_t pci_hose_phys_to_bus (struct pci_controller *hose,
 | |
| 				    phys_addr_t phys_addr,
 | |
| 				    unsigned long flags)
 | |
| {
 | |
| 	pci_addr_t bus_addr = 0;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!hose) {
 | |
| 		puts("pci_hose_phys_to_bus: invalid hose\n");
 | |
| 		return bus_addr;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * if PCI_REGION_MEM is set we do a two pass search with preference
 | |
| 	 * on matches that don't have PCI_REGION_SYS_MEMORY set
 | |
| 	 */
 | |
| 	if ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) {
 | |
| 		ret = __pci_hose_phys_to_bus(hose, phys_addr,
 | |
| 				flags, PCI_REGION_SYS_MEMORY, &bus_addr);
 | |
| 		if (!ret)
 | |
| 			return bus_addr;
 | |
| 	}
 | |
| 
 | |
| 	ret = __pci_hose_phys_to_bus(hose, phys_addr, flags, 0, &bus_addr);
 | |
| 
 | |
| 	if (ret)
 | |
| 		puts("pci_hose_phys_to_bus: invalid physical address\n");
 | |
| 
 | |
| 	return bus_addr;
 | |
| }
 | |
| 
 | |
| int __pci_hose_bus_to_phys(struct pci_controller *hose,
 | |
| 				pci_addr_t bus_addr,
 | |
| 				unsigned long flags,
 | |
| 				unsigned long skip_mask,
 | |
| 				phys_addr_t *pa)
 | |
| {
 | |
| 	struct pci_region *res;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < hose->region_count; i++) {
 | |
| 		res = &hose->regions[i];
 | |
| 
 | |
| 		if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0)
 | |
| 			continue;
 | |
| 
 | |
| 		if (res->flags & skip_mask)
 | |
| 			continue;
 | |
| 
 | |
| 		if (bus_addr >= res->bus_start &&
 | |
| 			bus_addr < res->bus_start + res->size) {
 | |
| 			*pa = (bus_addr - res->bus_start + res->phys_start);
 | |
| 			return 0;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 1;
 | |
| }
 | |
| 
 | |
| phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose,
 | |
| 				 pci_addr_t bus_addr,
 | |
| 				 unsigned long flags)
 | |
| {
 | |
| 	phys_addr_t phys_addr = 0;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!hose) {
 | |
| 		puts("pci_hose_bus_to_phys: invalid hose\n");
 | |
| 		return phys_addr;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * if PCI_REGION_MEM is set we do a two pass search with preference
 | |
| 	 * on matches that don't have PCI_REGION_SYS_MEMORY set
 | |
| 	 */
 | |
| 	if ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) {
 | |
| 		ret = __pci_hose_bus_to_phys(hose, bus_addr,
 | |
| 				flags, PCI_REGION_SYS_MEMORY, &phys_addr);
 | |
| 		if (!ret)
 | |
| 			return phys_addr;
 | |
| 	}
 | |
| 
 | |
| 	ret = __pci_hose_bus_to_phys(hose, bus_addr, flags, 0, &phys_addr);
 | |
| 
 | |
| 	if (ret)
 | |
| 		puts("pci_hose_bus_to_phys: invalid physical address\n");
 | |
| 
 | |
| 	return phys_addr;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  *
 | |
|  */
 | |
| 
 | |
| int pci_hose_config_device(struct pci_controller *hose,
 | |
| 			   pci_dev_t dev,
 | |
| 			   unsigned long io,
 | |
| 			   pci_addr_t mem,
 | |
| 			   unsigned long command)
 | |
| {
 | |
| 	u32 bar_response;
 | |
| 	unsigned int old_command;
 | |
| 	pci_addr_t bar_value;
 | |
| 	pci_size_t bar_size;
 | |
| 	unsigned char pin;
 | |
| 	int bar, found_mem64;
 | |
| 
 | |
| 	debug("PCI Config: I/O=0x%lx, Memory=0x%llx, Command=0x%lx\n", io,
 | |
| 		(u64)mem, command);
 | |
| 
 | |
| 	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, 0);
 | |
| 
 | |
| 	for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_5; bar += 4) {
 | |
| 		pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
 | |
| 		pci_hose_read_config_dword(hose, dev, bar, &bar_response);
 | |
| 
 | |
| 		if (!bar_response)
 | |
| 			continue;
 | |
| 
 | |
| 		found_mem64 = 0;
 | |
| 
 | |
| 		/* Check the BAR type and set our address mask */
 | |
| 		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
 | |
| 			bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1;
 | |
| 			/* round up region base address to a multiple of size */
 | |
| 			io = ((io - 1) | (bar_size - 1)) + 1;
 | |
| 			bar_value = io;
 | |
| 			/* compute new region base address */
 | |
| 			io = io + bar_size;
 | |
| 		} else {
 | |
| 			if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
 | |
| 				PCI_BASE_ADDRESS_MEM_TYPE_64) {
 | |
| 				u32 bar_response_upper;
 | |
| 				u64 bar64;
 | |
| 				pci_hose_write_config_dword(hose, dev, bar + 4,
 | |
| 					0xffffffff);
 | |
| 				pci_hose_read_config_dword(hose, dev, bar + 4,
 | |
| 					&bar_response_upper);
 | |
| 
 | |
| 				bar64 = ((u64)bar_response_upper << 32) | bar_response;
 | |
| 
 | |
| 				bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
 | |
| 				found_mem64 = 1;
 | |
| 			} else {
 | |
| 				bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
 | |
| 			}
 | |
| 
 | |
| 			/* round up region base address to multiple of size */
 | |
| 			mem = ((mem - 1) | (bar_size - 1)) + 1;
 | |
| 			bar_value = mem;
 | |
| 			/* compute new region base address */
 | |
| 			mem = mem + bar_size;
 | |
| 		}
 | |
| 
 | |
| 		/* Write it out and update our limit */
 | |
| 		pci_hose_write_config_dword (hose, dev, bar, (u32)bar_value);
 | |
| 
 | |
| 		if (found_mem64) {
 | |
| 			bar += 4;
 | |
| #ifdef CONFIG_SYS_PCI_64BIT
 | |
| 			pci_hose_write_config_dword(hose, dev, bar,
 | |
| 				(u32)(bar_value >> 32));
 | |
| #else
 | |
| 			pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
 | |
| #endif
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Configure Cache Line Size Register */
 | |
| 	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
 | |
| 
 | |
| 	/* Configure Latency Timer */
 | |
| 	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
 | |
| 
 | |
| 	/* Disable interrupt line, if device says it wants to use interrupts */
 | |
| 	pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin);
 | |
| 	if (pin != 0) {
 | |
| 		pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 0xff);
 | |
| 	}
 | |
| 
 | |
| 	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &old_command);
 | |
| 	pci_hose_write_config_dword(hose, dev, PCI_COMMAND,
 | |
| 				     (old_command & 0xffff0000) | command);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  *
 | |
|  */
 | |
| 
 | |
| struct pci_config_table *pci_find_config(struct pci_controller *hose,
 | |
| 					 unsigned short class,
 | |
| 					 unsigned int vendor,
 | |
| 					 unsigned int device,
 | |
| 					 unsigned int bus,
 | |
| 					 unsigned int dev,
 | |
| 					 unsigned int func)
 | |
| {
 | |
| 	struct pci_config_table *table;
 | |
| 
 | |
| 	for (table = hose->config_table; table && table->vendor; table++) {
 | |
| 		if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) &&
 | |
| 		    (table->device == PCI_ANY_ID || table->device == device) &&
 | |
| 		    (table->class  == PCI_ANY_ID || table->class  == class)  &&
 | |
| 		    (table->bus    == PCI_ANY_ID || table->bus    == bus)    &&
 | |
| 		    (table->dev    == PCI_ANY_ID || table->dev    == dev)    &&
 | |
| 		    (table->func   == PCI_ANY_ID || table->func   == func)) {
 | |
| 			return table;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| void pci_cfgfunc_config_device(struct pci_controller *hose,
 | |
| 			       pci_dev_t dev,
 | |
| 			       struct pci_config_table *entry)
 | |
| {
 | |
| 	pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1],
 | |
| 		entry->priv[2]);
 | |
| }
 | |
| 
 | |
| void pci_cfgfunc_do_nothing(struct pci_controller *hose,
 | |
| 			    pci_dev_t dev, struct pci_config_table *entry)
 | |
| {
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * HJF: Changed this to return int. I think this is required
 | |
|  * to get the correct result when scanning bridges
 | |
|  */
 | |
| extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
 | |
| 
 | |
| #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI_SCAN_SHOW)
 | |
| const char * pci_class_str(u8 class)
 | |
| {
 | |
| 	switch (class) {
 | |
| 	case PCI_CLASS_NOT_DEFINED:
 | |
| 		return "Build before PCI Rev2.0";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_STORAGE:
 | |
| 		return "Mass storage controller";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_NETWORK:
 | |
| 		return "Network controller";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_DISPLAY:
 | |
| 		return "Display controller";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_MULTIMEDIA:
 | |
| 		return "Multimedia device";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_MEMORY:
 | |
| 		return "Memory controller";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_BRIDGE:
 | |
| 		return "Bridge device";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_COMMUNICATION:
 | |
| 		return "Simple comm. controller";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_SYSTEM:
 | |
| 		return "Base system peripheral";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_INPUT:
 | |
| 		return "Input device";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_DOCKING:
 | |
| 		return "Docking station";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_PROCESSOR:
 | |
| 		return "Processor";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_SERIAL:
 | |
| 		return "Serial bus controller";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_INTELLIGENT:
 | |
| 		return "Intelligent controller";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_SATELLITE:
 | |
| 		return "Satellite controller";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_CRYPT:
 | |
| 		return "Cryptographic device";
 | |
| 		break;
 | |
| 	case PCI_BASE_CLASS_SIGNAL_PROCESSING:
 | |
| 		return "DSP";
 | |
| 		break;
 | |
| 	case PCI_CLASS_OTHERS:
 | |
| 		return "Does not fit any class";
 | |
| 		break;
 | |
| 	default:
 | |
| 	return  "???";
 | |
| 		break;
 | |
| 	};
 | |
| }
 | |
| #endif /* CONFIG_CMD_PCI || CONFIG_PCI_SCAN_SHOW */
 | |
| 
 | |
| int __pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
 | |
| {
 | |
| 	/*
 | |
| 	 * Check if pci device should be skipped in configuration
 | |
| 	 */
 | |
| 	if (dev == PCI_BDF(hose->first_busno, 0, 0)) {
 | |
| #if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */
 | |
| 		/*
 | |
| 		 * Only skip configuration if "pciconfighost" is not set
 | |
| 		 */
 | |
| 		if (getenv("pciconfighost") == NULL)
 | |
| 			return 1;
 | |
| #else
 | |
| 		return 1;
 | |
| #endif
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
 | |
| 	__attribute__((weak, alias("__pci_skip_dev")));
 | |
| 
 | |
| #ifdef CONFIG_PCI_SCAN_SHOW
 | |
| int __pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
 | |
| {
 | |
| 	if (dev == PCI_BDF(hose->first_busno, 0, 0))
 | |
| 		return 0;
 | |
| 
 | |
| 	return 1;
 | |
| }
 | |
| int pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
 | |
| 	__attribute__((weak, alias("__pci_print_dev")));
 | |
| #endif /* CONFIG_PCI_SCAN_SHOW */
 | |
| 
 | |
| int pci_hose_scan_bus(struct pci_controller *hose, int bus)
 | |
| {
 | |
| 	unsigned int sub_bus, found_multi = 0;
 | |
| 	unsigned short vendor, device, class;
 | |
| 	unsigned char header_type;
 | |
| #ifndef CONFIG_PCI_PNP
 | |
| 	struct pci_config_table *cfg;
 | |
| #endif
 | |
| 	pci_dev_t dev;
 | |
| #ifdef CONFIG_PCI_SCAN_SHOW
 | |
| 	static int indent = 0;
 | |
| #endif
 | |
| 
 | |
| 	sub_bus = bus;
 | |
| 
 | |
| 	for (dev =  PCI_BDF(bus,0,0);
 | |
| 	     dev <  PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1,
 | |
| 				PCI_MAX_PCI_FUNCTIONS - 1);
 | |
| 	     dev += PCI_BDF(0, 0, 1)) {
 | |
| 
 | |
| 		if (pci_skip_dev(hose, dev))
 | |
| 			continue;
 | |
| 
 | |
| 		if (PCI_FUNC(dev) && !found_multi)
 | |
| 			continue;
 | |
| 
 | |
| 		pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
 | |
| 
 | |
| 		pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor);
 | |
| 
 | |
| 		if (vendor == 0xffff || vendor == 0x0000)
 | |
| 			continue;
 | |
| 
 | |
| 		if (!PCI_FUNC(dev))
 | |
| 			found_multi = header_type & 0x80;
 | |
| 
 | |
| 		debug("PCI Scan: Found Bus %d, Device %d, Function %d\n",
 | |
| 			PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
 | |
| 
 | |
| 		pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device);
 | |
| 		pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
 | |
| 
 | |
| #ifdef CONFIG_PCI_SCAN_SHOW
 | |
| 		indent++;
 | |
| 
 | |
| 		/* Print leading space, including bus indentation */
 | |
| 		printf("%*c", indent + 1, ' ');
 | |
| 
 | |
| 		if (pci_print_dev(hose, dev)) {
 | |
| 			printf("%02x:%02x.%-*x - %04x:%04x - %s\n",
 | |
| 			       PCI_BUS(dev), PCI_DEV(dev), 6 - indent, PCI_FUNC(dev),
 | |
| 			       vendor, device, pci_class_str(class >> 8));
 | |
| 		}
 | |
| #endif
 | |
| 
 | |
| #ifdef CONFIG_PCI_PNP
 | |
| 		sub_bus = max(pciauto_config_device(hose, dev), sub_bus);
 | |
| #else
 | |
| 		cfg = pci_find_config(hose, class, vendor, device,
 | |
| 				      PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
 | |
| 		if (cfg) {
 | |
| 			cfg->config_device(hose, dev, cfg);
 | |
| 			sub_bus = max(sub_bus, hose->current_busno);
 | |
| 		}
 | |
| #endif
 | |
| 
 | |
| #ifdef CONFIG_PCI_SCAN_SHOW
 | |
| 		indent--;
 | |
| #endif
 | |
| 
 | |
| 		if (hose->fixup_irq)
 | |
| 			hose->fixup_irq(hose, dev);
 | |
| 	}
 | |
| 
 | |
| 	return sub_bus;
 | |
| }
 | |
| 
 | |
| int pci_hose_scan(struct pci_controller *hose)
 | |
| {
 | |
| #if defined(CONFIG_PCI_BOOTDELAY)
 | |
| 	static int pcidelay_done;
 | |
| 	char *s;
 | |
| 	int i;
 | |
| 
 | |
| 	if (!pcidelay_done) {
 | |
| 		/* wait "pcidelay" ms (if defined)... */
 | |
| 		s = getenv("pcidelay");
 | |
| 		if (s) {
 | |
| 			int val = simple_strtoul(s, NULL, 10);
 | |
| 			for (i = 0; i < val; i++)
 | |
| 				udelay(1000);
 | |
| 		}
 | |
| 		pcidelay_done = 1;
 | |
| 	}
 | |
| #endif /* CONFIG_PCI_BOOTDELAY */
 | |
| 
 | |
| 	/*
 | |
| 	 * Start scan at current_busno.
 | |
| 	 * PCIe will start scan at first_busno+1.
 | |
| 	 */
 | |
| 	/* For legacy support, ensure current >= first */
 | |
| 	if (hose->first_busno > hose->current_busno)
 | |
| 		hose->current_busno = hose->first_busno;
 | |
| #ifdef CONFIG_PCI_PNP
 | |
| 	pciauto_config_init(hose);
 | |
| #endif
 | |
| 	return pci_hose_scan_bus(hose, hose->current_busno);
 | |
| }
 | |
| 
 | |
| void pci_init(void)
 | |
| {
 | |
| 	hose_head = NULL;
 | |
| 
 | |
| 	/* now call board specific pci_init()... */
 | |
| 	pci_init_board();
 | |
| }
 |