mirror of
https://xff.cz/git/u-boot/
synced 2025-10-31 02:15:45 +01:00
500327e2ea
DT alignment with Linux kernel v5.8-rc1 for the STM32MP15x soc device tree files and the STMicroelectronics boards device tree files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
1755 lines
41 KiB
Plaintext
1755 lines
41 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
|
/*
|
|
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
|
|
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
|
|
*/
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/stm32mp1-clks.h>
|
|
#include <dt-bindings/reset/stm32mp1-resets.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a7";
|
|
clock-frequency = <650000000>;
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
nvmem-cells = <&part_number_otp>;
|
|
nvmem-cell-names = "part_number";
|
|
};
|
|
};
|
|
|
|
cpu0_opp_table: cpu0-opp-table {
|
|
compatible = "operating-points-v2";
|
|
opp-shared;
|
|
opp-650000000 {
|
|
opp-hz = /bits/ 64 <650000000>;
|
|
opp-microvolt = <1200000>;
|
|
opp-supported-hw = <0x1>;
|
|
};
|
|
opp-800000000 {
|
|
opp-hz = /bits/ 64 <800000000>;
|
|
opp-microvolt = <1350000>;
|
|
opp-supported-hw = <0x2>;
|
|
};
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
};
|
|
|
|
intc: interrupt-controller@a0021000 {
|
|
compatible = "arm,cortex-a7-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0xa0021000 0x1000>,
|
|
<0xa0022000 0x2000>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
interrupt-parent = <&intc>;
|
|
};
|
|
|
|
clocks {
|
|
clk_hse: clk-hse {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
clk_hsi: clk-hsi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <64000000>;
|
|
};
|
|
|
|
clk_lse: clk-lse {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
clk_lsi: clk-lsi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32000>;
|
|
};
|
|
|
|
clk_csi: clk-csi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <4000000>;
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu_thermal: cpu-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&dts>;
|
|
|
|
trips {
|
|
cpu_alert1: cpu-alert1 {
|
|
temperature = <85000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu-crit {
|
|
temperature = <120000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
};
|
|
};
|
|
};
|
|
|
|
booster: regulator-booster {
|
|
compatible = "st,stm32mp1-booster";
|
|
st,syscfg = <&syscfg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
|
|
timers2: timer@40000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40000000 0x400>;
|
|
clocks = <&rcc TIM2_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 18 0x400 0x1>,
|
|
<&dmamux1 19 0x400 0x1>,
|
|
<&dmamux1 20 0x400 0x1>,
|
|
<&dmamux1 21 0x400 0x1>,
|
|
<&dmamux1 22 0x400 0x1>;
|
|
dma-names = "ch1", "ch2", "ch3", "ch4", "up";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@1 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-timer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers3: timer@40001000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40001000 0x400>;
|
|
clocks = <&rcc TIM3_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 23 0x400 0x1>,
|
|
<&dmamux1 24 0x400 0x1>,
|
|
<&dmamux1 25 0x400 0x1>,
|
|
<&dmamux1 26 0x400 0x1>,
|
|
<&dmamux1 27 0x400 0x1>,
|
|
<&dmamux1 28 0x400 0x1>;
|
|
dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@2 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-timer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers4: timer@40002000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40002000 0x400>;
|
|
clocks = <&rcc TIM4_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 29 0x400 0x1>,
|
|
<&dmamux1 30 0x400 0x1>,
|
|
<&dmamux1 31 0x400 0x1>,
|
|
<&dmamux1 32 0x400 0x1>;
|
|
dma-names = "ch1", "ch2", "ch3", "ch4";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@3 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-timer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers5: timer@40003000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40003000 0x400>;
|
|
clocks = <&rcc TIM5_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 55 0x400 0x1>,
|
|
<&dmamux1 56 0x400 0x1>,
|
|
<&dmamux1 57 0x400 0x1>,
|
|
<&dmamux1 58 0x400 0x1>,
|
|
<&dmamux1 59 0x400 0x1>,
|
|
<&dmamux1 60 0x400 0x1>;
|
|
dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@4 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-timer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers6: timer@40004000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40004000 0x400>;
|
|
clocks = <&rcc TIM6_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 69 0x400 0x1>;
|
|
dma-names = "up";
|
|
status = "disabled";
|
|
|
|
timer@5 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <5>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers7: timer@40005000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40005000 0x400>;
|
|
clocks = <&rcc TIM7_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 70 0x400 0x1>;
|
|
dma-names = "up";
|
|
status = "disabled";
|
|
|
|
timer@6 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <6>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers12: timer@40006000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40006000 0x400>;
|
|
clocks = <&rcc TIM12_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@11 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <11>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers13: timer@40007000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40007000 0x400>;
|
|
clocks = <&rcc TIM13_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@12 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <12>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers14: timer@40008000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40008000 0x400>;
|
|
clocks = <&rcc TIM14_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@13 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <13>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
lptimer1: timer@40009000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x40009000 0x400>;
|
|
clocks = <&rcc LPTIM1_K>;
|
|
clock-names = "mux";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
trigger@0 {
|
|
compatible = "st,stm32-lptimer-trigger";
|
|
reg = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-lptimer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spi2: spi@4000b000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x4000b000 0x400>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI2_K>;
|
|
resets = <&rcc SPI2_R>;
|
|
dmas = <&dmamux1 39 0x400 0x05>,
|
|
<&dmamux1 40 0x400 0x05>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s2: audio-controller@4000b000 {
|
|
compatible = "st,stm32h7-i2s";
|
|
#sound-dai-cells = <0>;
|
|
reg = <0x4000b000 0x400>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 39 0x400 0x01>,
|
|
<&dmamux1 40 0x400 0x01>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi3: spi@4000c000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x4000c000 0x400>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI3_K>;
|
|
resets = <&rcc SPI3_R>;
|
|
dmas = <&dmamux1 61 0x400 0x05>,
|
|
<&dmamux1 62 0x400 0x05>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s3: audio-controller@4000c000 {
|
|
compatible = "st,stm32h7-i2s";
|
|
#sound-dai-cells = <0>;
|
|
reg = <0x4000c000 0x400>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 61 0x400 0x01>,
|
|
<&dmamux1 62 0x400 0x01>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spdifrx: audio-controller@4000d000 {
|
|
compatible = "st,stm32h7-spdifrx";
|
|
#sound-dai-cells = <0>;
|
|
reg = <0x4000d000 0x400>;
|
|
clocks = <&rcc SPDIF_K>;
|
|
clock-names = "kclk";
|
|
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 93 0x400 0x01>,
|
|
<&dmamux1 94 0x400 0x01>;
|
|
dma-names = "rx", "rx-ctrl";
|
|
status = "disabled";
|
|
};
|
|
|
|
usart2: serial@4000e000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x4000e000 0x400>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc USART2_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usart3: serial@4000f000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x4000f000 0x400>;
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc USART3_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@40010000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40010000 0x400>;
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc UART4_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@40011000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40011000 0x400>;
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc UART5_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@40012000 {
|
|
compatible = "st,stm32mp15-i2c";
|
|
reg = <0x40012000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C1_K>;
|
|
resets = <&rcc I2C1_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
st,syscfg-fmp = <&syscfg 0x4 0x1>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@40013000 {
|
|
compatible = "st,stm32mp15-i2c";
|
|
reg = <0x40013000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C2_K>;
|
|
resets = <&rcc I2C2_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
st,syscfg-fmp = <&syscfg 0x4 0x2>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@40014000 {
|
|
compatible = "st,stm32mp15-i2c";
|
|
reg = <0x40014000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C3_K>;
|
|
resets = <&rcc I2C3_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
st,syscfg-fmp = <&syscfg 0x4 0x4>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c5: i2c@40015000 {
|
|
compatible = "st,stm32mp15-i2c";
|
|
reg = <0x40015000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C5_K>;
|
|
resets = <&rcc I2C5_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
st,syscfg-fmp = <&syscfg 0x4 0x10>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
cec: cec@40016000 {
|
|
compatible = "st,stm32-cec";
|
|
reg = <0x40016000 0x400>;
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc CEC_K>, <&clk_lse>;
|
|
clock-names = "cec", "hdmi-cec";
|
|
status = "disabled";
|
|
};
|
|
|
|
dac: dac@40017000 {
|
|
compatible = "st,stm32h7-dac-core";
|
|
reg = <0x40017000 0x400>;
|
|
clocks = <&rcc DAC12>;
|
|
clock-names = "pclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
|
|
dac1: dac@1 {
|
|
compatible = "st,stm32-dac";
|
|
#io-channel-cells = <1>;
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dac2: dac@2 {
|
|
compatible = "st,stm32-dac";
|
|
#io-channel-cells = <1>;
|
|
reg = <2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
uart7: serial@40018000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40018000 0x400>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc UART7_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart8: serial@40019000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40019000 0x400>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc UART8_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timers1: timer@44000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44000000 0x400>;
|
|
clocks = <&rcc TIM1_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 11 0x400 0x1>,
|
|
<&dmamux1 12 0x400 0x1>,
|
|
<&dmamux1 13 0x400 0x1>,
|
|
<&dmamux1 14 0x400 0x1>,
|
|
<&dmamux1 15 0x400 0x1>,
|
|
<&dmamux1 16 0x400 0x1>,
|
|
<&dmamux1 17 0x400 0x1>;
|
|
dma-names = "ch1", "ch2", "ch3", "ch4",
|
|
"up", "trig", "com";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@0 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-timer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers8: timer@44001000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44001000 0x400>;
|
|
clocks = <&rcc TIM8_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 47 0x400 0x1>,
|
|
<&dmamux1 48 0x400 0x1>,
|
|
<&dmamux1 49 0x400 0x1>,
|
|
<&dmamux1 50 0x400 0x1>,
|
|
<&dmamux1 51 0x400 0x1>,
|
|
<&dmamux1 52 0x400 0x1>,
|
|
<&dmamux1 53 0x400 0x1>;
|
|
dma-names = "ch1", "ch2", "ch3", "ch4",
|
|
"up", "trig", "com";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@7 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <7>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-timer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usart6: serial@44003000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x44003000 0x400>;
|
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc USART6_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@44004000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x44004000 0x400>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI1_K>;
|
|
resets = <&rcc SPI1_R>;
|
|
dmas = <&dmamux1 37 0x400 0x05>,
|
|
<&dmamux1 38 0x400 0x05>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s1: audio-controller@44004000 {
|
|
compatible = "st,stm32h7-i2s";
|
|
#sound-dai-cells = <0>;
|
|
reg = <0x44004000 0x400>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 37 0x400 0x01>,
|
|
<&dmamux1 38 0x400 0x01>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi4: spi@44005000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x44005000 0x400>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI4_K>;
|
|
resets = <&rcc SPI4_R>;
|
|
dmas = <&dmamux1 83 0x400 0x05>,
|
|
<&dmamux1 84 0x400 0x05>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
timers15: timer@44006000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44006000 0x400>;
|
|
clocks = <&rcc TIM15_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 105 0x400 0x1>,
|
|
<&dmamux1 106 0x400 0x1>,
|
|
<&dmamux1 107 0x400 0x1>,
|
|
<&dmamux1 108 0x400 0x1>;
|
|
dma-names = "ch1", "up", "trig", "com";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@14 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <14>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers16: timer@44007000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44007000 0x400>;
|
|
clocks = <&rcc TIM16_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 109 0x400 0x1>,
|
|
<&dmamux1 110 0x400 0x1>;
|
|
dma-names = "ch1", "up";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
timer@15 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <15>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers17: timer@44008000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44008000 0x400>;
|
|
clocks = <&rcc TIM17_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 111 0x400 0x1>,
|
|
<&dmamux1 112 0x400 0x1>;
|
|
dma-names = "ch1", "up";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@16 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <16>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spi5: spi@44009000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x44009000 0x400>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI5_K>;
|
|
resets = <&rcc SPI5_R>;
|
|
dmas = <&dmamux1 85 0x400 0x05>,
|
|
<&dmamux1 86 0x400 0x05>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sai1: sai@4400a000 {
|
|
compatible = "st,stm32h7-sai";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x4400a000 0x400>;
|
|
reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&rcc SAI1_R>;
|
|
status = "disabled";
|
|
|
|
sai1a: audio-controller@4400a004 {
|
|
#sound-dai-cells = <0>;
|
|
|
|
compatible = "st,stm32-sai-sub-a";
|
|
reg = <0x4 0x1c>;
|
|
clocks = <&rcc SAI1_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 87 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai1b: audio-controller@4400a024 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-b";
|
|
reg = <0x24 0x1c>;
|
|
clocks = <&rcc SAI1_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 88 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sai2: sai@4400b000 {
|
|
compatible = "st,stm32h7-sai";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x4400b000 0x400>;
|
|
reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&rcc SAI2_R>;
|
|
status = "disabled";
|
|
|
|
sai2a: audio-controller@4400b004 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-a";
|
|
reg = <0x4 0x1c>;
|
|
clocks = <&rcc SAI2_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 89 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai2b: audio-controller@4400b024 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-b";
|
|
reg = <0x24 0x1c>;
|
|
clocks = <&rcc SAI2_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 90 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sai3: sai@4400c000 {
|
|
compatible = "st,stm32h7-sai";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x4400c000 0x400>;
|
|
reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&rcc SAI3_R>;
|
|
status = "disabled";
|
|
|
|
sai3a: audio-controller@4400c004 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-a";
|
|
reg = <0x04 0x1c>;
|
|
clocks = <&rcc SAI3_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 113 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai3b: audio-controller@4400c024 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-b";
|
|
reg = <0x24 0x1c>;
|
|
clocks = <&rcc SAI3_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 114 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
dfsdm: dfsdm@4400d000 {
|
|
compatible = "st,stm32mp1-dfsdm";
|
|
reg = <0x4400d000 0x800>;
|
|
clocks = <&rcc DFSDM_K>;
|
|
clock-names = "dfsdm";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
|
|
dfsdm0: filter@0 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <0>;
|
|
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 101 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
dfsdm1: filter@1 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <1>;
|
|
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 102 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
dfsdm2: filter@2 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <2>;
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 103 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
dfsdm3: filter@3 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <3>;
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 104 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
dfsdm4: filter@4 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <4>;
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 91 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
dfsdm5: filter@5 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <5>;
|
|
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 92 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
dma1: dma-controller@48000000 {
|
|
compatible = "st,stm32-dma";
|
|
reg = <0x48000000 0x400>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc DMA1>;
|
|
resets = <&rcc DMA1_R>;
|
|
#dma-cells = <4>;
|
|
st,mem2mem;
|
|
dma-requests = <8>;
|
|
};
|
|
|
|
dma2: dma-controller@48001000 {
|
|
compatible = "st,stm32-dma";
|
|
reg = <0x48001000 0x400>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc DMA2>;
|
|
resets = <&rcc DMA2_R>;
|
|
#dma-cells = <4>;
|
|
st,mem2mem;
|
|
dma-requests = <8>;
|
|
};
|
|
|
|
dmamux1: dma-router@48002000 {
|
|
compatible = "st,stm32h7-dmamux";
|
|
reg = <0x48002000 0x1c>;
|
|
#dma-cells = <3>;
|
|
dma-requests = <128>;
|
|
dma-masters = <&dma1 &dma2>;
|
|
dma-channels = <16>;
|
|
clocks = <&rcc DMAMUX>;
|
|
resets = <&rcc DMAMUX_R>;
|
|
};
|
|
|
|
adc: adc@48003000 {
|
|
compatible = "st,stm32mp1-adc-core";
|
|
reg = <0x48003000 0x400>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc ADC12>, <&rcc ADC12_K>;
|
|
clock-names = "bus", "adc";
|
|
interrupt-controller;
|
|
st,syscfg = <&syscfg>;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
|
|
adc1: adc@0 {
|
|
compatible = "st,stm32mp1-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <0x0>;
|
|
interrupt-parent = <&adc>;
|
|
interrupts = <0>;
|
|
dmas = <&dmamux1 9 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
adc2: adc@100 {
|
|
compatible = "st,stm32mp1-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <0x100>;
|
|
interrupt-parent = <&adc>;
|
|
interrupts = <1>;
|
|
dmas = <&dmamux1 10 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sdmmc3: sdmmc@48004000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x10153180>;
|
|
reg = <0x48004000 0x400>;
|
|
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&rcc SDMMC3_K>;
|
|
clock-names = "apb_pclk";
|
|
resets = <&rcc SDMMC3_R>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <120000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbotg_hs: usb-otg@49000000 {
|
|
compatible = "st,stm32mp15-hsotg", "snps,dwc2";
|
|
reg = <0x49000000 0x10000>;
|
|
clocks = <&rcc USBO_K>;
|
|
clock-names = "otg";
|
|
resets = <&rcc USBO_R>;
|
|
reset-names = "dwc2";
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
g-rx-fifo-size = <256>;
|
|
g-np-tx-fifo-size = <32>;
|
|
g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
|
|
dr_mode = "otg";
|
|
usb33d-supply = <&usb33>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hwspinlock: hwspinlock@4c000000 {
|
|
compatible = "st,stm32-hwspinlock";
|
|
#hwlock-cells = <1>;
|
|
reg = <0x4c000000 0x400>;
|
|
clocks = <&rcc HSEM>;
|
|
clock-names = "hwspinlock";
|
|
};
|
|
|
|
ipcc: mailbox@4c001000 {
|
|
compatible = "st,stm32mp1-ipcc";
|
|
#mbox-cells = <1>;
|
|
reg = <0x4c001000 0x400>;
|
|
st,proc-id = <0>;
|
|
interrupts-extended =
|
|
<&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&exti 61 1>;
|
|
interrupt-names = "rx", "tx", "wakeup";
|
|
clocks = <&rcc IPCC>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
dcmi: dcmi@4c006000 {
|
|
compatible = "st,stm32-dcmi";
|
|
reg = <0x4c006000 0x400>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&rcc CAMITF_R>;
|
|
clocks = <&rcc DCMI>;
|
|
clock-names = "mclk";
|
|
dmas = <&dmamux1 75 0x400 0x0d>;
|
|
dma-names = "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
rcc: rcc@50000000 {
|
|
compatible = "st,stm32mp1-rcc", "syscon";
|
|
reg = <0x50000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pwr_regulators: pwr@50001000 {
|
|
compatible = "st,stm32mp1,pwr-reg";
|
|
reg = <0x50001000 0x10>;
|
|
|
|
reg11: reg11 {
|
|
regulator-name = "reg11";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
};
|
|
|
|
reg18: reg18 {
|
|
regulator-name = "reg18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
usb33: usb33 {
|
|
regulator-name = "usb33";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
pwr_mcu: pwr_mcu@50001014 {
|
|
compatible = "syscon";
|
|
reg = <0x50001014 0x4>;
|
|
};
|
|
|
|
exti: interrupt-controller@5000d000 {
|
|
compatible = "st,stm32mp1-exti", "syscon";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x5000d000 0x400>;
|
|
};
|
|
|
|
syscfg: syscon@50020000 {
|
|
compatible = "st,stm32mp157-syscfg", "syscon";
|
|
reg = <0x50020000 0x400>;
|
|
clocks = <&rcc SYSCFG>;
|
|
};
|
|
|
|
lptimer2: timer@50021000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x50021000 0x400>;
|
|
clocks = <&rcc LPTIM2_K>;
|
|
clock-names = "mux";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
trigger@1 {
|
|
compatible = "st,stm32-lptimer-trigger";
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-lptimer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
lptimer3: timer@50022000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x50022000 0x400>;
|
|
clocks = <&rcc LPTIM3_K>;
|
|
clock-names = "mux";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
trigger@2 {
|
|
compatible = "st,stm32-lptimer-trigger";
|
|
reg = <2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
lptimer4: timer@50023000 {
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x50023000 0x400>;
|
|
clocks = <&rcc LPTIM4_K>;
|
|
clock-names = "mux";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
lptimer5: timer@50024000 {
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x50024000 0x400>;
|
|
clocks = <&rcc LPTIM5_K>;
|
|
clock-names = "mux";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
vrefbuf: vrefbuf@50025000 {
|
|
compatible = "st,stm32-vrefbuf";
|
|
reg = <0x50025000 0x8>;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
clocks = <&rcc VREF>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai4: sai@50027000 {
|
|
compatible = "st,stm32h7-sai";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x50027000 0x400>;
|
|
reg = <0x50027000 0x4>, <0x500273f0 0x10>;
|
|
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&rcc SAI4_R>;
|
|
status = "disabled";
|
|
|
|
sai4a: audio-controller@50027004 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-a";
|
|
reg = <0x04 0x1c>;
|
|
clocks = <&rcc SAI4_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 99 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai4b: audio-controller@50027024 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-b";
|
|
reg = <0x24 0x1c>;
|
|
clocks = <&rcc SAI4_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 100 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
dts: thermal@50028000 {
|
|
compatible = "st,stm32-thermal";
|
|
reg = <0x50028000 0x100>;
|
|
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc TMPSENS>;
|
|
clock-names = "pclk";
|
|
#thermal-sensor-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hash1: hash@54002000 {
|
|
compatible = "st,stm32f756-hash";
|
|
reg = <0x54002000 0x400>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc HASH1>;
|
|
resets = <&rcc HASH1_R>;
|
|
dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>;
|
|
dma-names = "in";
|
|
dma-maxburst = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
rng1: rng@54003000 {
|
|
compatible = "st,stm32-rng";
|
|
reg = <0x54003000 0x400>;
|
|
clocks = <&rcc RNG1_K>;
|
|
resets = <&rcc RNG1_R>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mdma1: dma-controller@58000000 {
|
|
compatible = "st,stm32h7-mdma";
|
|
reg = <0x58000000 0x1000>;
|
|
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc MDMA>;
|
|
resets = <&rcc MDMA_R>;
|
|
#dma-cells = <5>;
|
|
dma-channels = <32>;
|
|
dma-requests = <48>;
|
|
};
|
|
|
|
fmc: nand-controller@58002000 {
|
|
compatible = "st,stm32mp15-fmc2";
|
|
reg = <0x58002000 0x1000>,
|
|
<0x80000000 0x1000>,
|
|
<0x88010000 0x1000>,
|
|
<0x88020000 0x1000>,
|
|
<0x81000000 0x1000>,
|
|
<0x89010000 0x1000>,
|
|
<0x89020000 0x1000>;
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>,
|
|
<&mdma1 20 0x10 0x12000a08 0x0 0x0>,
|
|
<&mdma1 21 0x10 0x12000a0a 0x0 0x0>;
|
|
dma-names = "tx", "rx", "ecc";
|
|
clocks = <&rcc FMC_K>;
|
|
resets = <&rcc FMC_R>;
|
|
status = "disabled";
|
|
};
|
|
|
|
qspi: spi@58003000 {
|
|
compatible = "st,stm32f469-qspi";
|
|
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
|
|
reg-names = "qspi", "qspi_mm";
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
|
|
<&mdma1 22 0x10 0x100008 0x0 0x0>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&rcc QSPI_K>;
|
|
resets = <&rcc QSPI_R>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdmmc1: sdmmc@58005000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x10153180>;
|
|
reg = <0x58005000 0x1000>;
|
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&rcc SDMMC1_K>;
|
|
clock-names = "apb_pclk";
|
|
resets = <&rcc SDMMC1_R>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <120000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdmmc2: sdmmc@58007000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x10153180>;
|
|
reg = <0x58007000 0x1000>;
|
|
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&rcc SDMMC2_K>;
|
|
clock-names = "apb_pclk";
|
|
resets = <&rcc SDMMC2_R>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <120000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
crc1: crc@58009000 {
|
|
compatible = "st,stm32f7-crc";
|
|
reg = <0x58009000 0x400>;
|
|
clocks = <&rcc CRC1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
stmmac_axi_config_0: stmmac-axi-config {
|
|
snps,wr_osr_lmt = <0x7>;
|
|
snps,rd_osr_lmt = <0x7>;
|
|
snps,blen = <0 0 0 0 16 8 4>;
|
|
};
|
|
|
|
ethernet0: ethernet@5800a000 {
|
|
compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
|
|
reg = <0x5800a000 0x2000>;
|
|
reg-names = "stmmaceth";
|
|
interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
clock-names = "stmmaceth",
|
|
"mac-clk-tx",
|
|
"mac-clk-rx",
|
|
"eth-ck",
|
|
"ethstp";
|
|
clocks = <&rcc ETHMAC>,
|
|
<&rcc ETHTX>,
|
|
<&rcc ETHRX>,
|
|
<&rcc ETHCK_K>,
|
|
<&rcc ETHSTP>;
|
|
st,syscon = <&syscfg 0x4>;
|
|
snps,mixed-burst;
|
|
snps,pbl = <2>;
|
|
snps,en-tx-lpi-clockgating;
|
|
snps,axi-config = <&stmmac_axi_config_0>;
|
|
snps,tso;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh_ohci: usbh-ohci@5800c000 {
|
|
compatible = "generic-ohci";
|
|
reg = <0x5800c000 0x1000>;
|
|
clocks = <&rcc USBH>;
|
|
resets = <&rcc USBH_R>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh_ehci: usbh-ehci@5800d000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x5800d000 0x1000>;
|
|
clocks = <&rcc USBH>;
|
|
resets = <&rcc USBH_R>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
companion = <&usbh_ohci>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ltdc: display-controller@5a001000 {
|
|
compatible = "st,stm32-ltdc";
|
|
reg = <0x5a001000 0x400>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc LTDC_PX>;
|
|
clock-names = "lcd";
|
|
resets = <&rcc LTDC_R>;
|
|
status = "disabled";
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
iwdg2: watchdog@5a002000 {
|
|
compatible = "st,stm32mp1-iwdg";
|
|
reg = <0x5a002000 0x400>;
|
|
clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
|
|
clock-names = "pclk", "lsi";
|
|
status = "disabled";
|
|
};
|
|
|
|
usbphyc: usbphyc@5a006000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32mp1-usbphyc";
|
|
reg = <0x5a006000 0x1000>;
|
|
clocks = <&rcc USBPHY_K>;
|
|
resets = <&rcc USBPHY_R>;
|
|
vdda1v1-supply = <®11>;
|
|
vdda1v8-supply = <®18>;
|
|
status = "disabled";
|
|
|
|
usbphyc_port0: usb-phy@0 {
|
|
#phy-cells = <0>;
|
|
reg = <0>;
|
|
};
|
|
|
|
usbphyc_port1: usb-phy@1 {
|
|
#phy-cells = <1>;
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
usart1: serial@5c000000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x5c000000 0x400>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc USART1_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi6: spi@5c001000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x5c001000 0x400>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI6_K>;
|
|
resets = <&rcc SPI6_R>;
|
|
dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
|
|
<&mdma1 35 0x0 0x40002 0x0 0x0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@5c002000 {
|
|
compatible = "st,stm32mp15-i2c";
|
|
reg = <0x5c002000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C4_K>;
|
|
resets = <&rcc I2C4_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
st,syscfg-fmp = <&syscfg 0x4 0x8>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
rtc: rtc@5c004000 {
|
|
compatible = "st,stm32mp1-rtc";
|
|
reg = <0x5c004000 0x400>;
|
|
clocks = <&rcc RTCAPB>, <&rcc RTC>;
|
|
clock-names = "pclk", "rtc_ck";
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
bsec: efuse@5c005000 {
|
|
compatible = "st,stm32mp15-bsec";
|
|
reg = <0x5c005000 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
part_number_otp: part_number_otp@4 {
|
|
reg = <0x4 0x1>;
|
|
};
|
|
ts_cal1: calib@5c {
|
|
reg = <0x5c 0x2>;
|
|
};
|
|
ts_cal2: calib@5e {
|
|
reg = <0x5e 0x2>;
|
|
};
|
|
};
|
|
|
|
i2c6: i2c@5c009000 {
|
|
compatible = "st,stm32mp15-i2c";
|
|
reg = <0x5c009000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C6_K>;
|
|
resets = <&rcc I2C6_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
st,syscfg-fmp = <&syscfg 0x4 0x20>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
/*
|
|
* Break node order to solve dependency probe issue between
|
|
* pinctrl and exti.
|
|
*/
|
|
pinctrl: pin-controller@50002000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "st,stm32mp157-pinctrl";
|
|
ranges = <0 0x50002000 0xa400>;
|
|
interrupt-parent = <&exti>;
|
|
st,syscfg = <&exti 0x60 0xff>;
|
|
hwlocks = <&hwspinlock 0>;
|
|
pins-are-numbered;
|
|
|
|
gpioa: gpio@50002000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x0 0x400>;
|
|
clocks = <&rcc GPIOA>;
|
|
st,bank-name = "GPIOA";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiob: gpio@50003000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x1000 0x400>;
|
|
clocks = <&rcc GPIOB>;
|
|
st,bank-name = "GPIOB";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioc: gpio@50004000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x2000 0x400>;
|
|
clocks = <&rcc GPIOC>;
|
|
st,bank-name = "GPIOC";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiod: gpio@50005000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x3000 0x400>;
|
|
clocks = <&rcc GPIOD>;
|
|
st,bank-name = "GPIOD";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioe: gpio@50006000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x4000 0x400>;
|
|
clocks = <&rcc GPIOE>;
|
|
st,bank-name = "GPIOE";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiof: gpio@50007000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x5000 0x400>;
|
|
clocks = <&rcc GPIOF>;
|
|
st,bank-name = "GPIOF";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiog: gpio@50008000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x6000 0x400>;
|
|
clocks = <&rcc GPIOG>;
|
|
st,bank-name = "GPIOG";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioh: gpio@50009000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x7000 0x400>;
|
|
clocks = <&rcc GPIOH>;
|
|
st,bank-name = "GPIOH";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioi: gpio@5000a000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x8000 0x400>;
|
|
clocks = <&rcc GPIOI>;
|
|
st,bank-name = "GPIOI";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioj: gpio@5000b000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x9000 0x400>;
|
|
clocks = <&rcc GPIOJ>;
|
|
st,bank-name = "GPIOJ";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiok: gpio@5000c000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0xa000 0x400>;
|
|
clocks = <&rcc GPIOK>;
|
|
st,bank-name = "GPIOK";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pinctrl_z: pin-controller-z@54004000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "st,stm32mp157-z-pinctrl";
|
|
ranges = <0 0x54004000 0x400>;
|
|
pins-are-numbered;
|
|
interrupt-parent = <&exti>;
|
|
st,syscfg = <&exti 0x60 0xff>;
|
|
hwlocks = <&hwspinlock 0>;
|
|
|
|
gpioz: gpio@54004000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0 0x400>;
|
|
clocks = <&rcc GPIOZ>;
|
|
st,bank-name = "GPIOZ";
|
|
st,bank-ioport = <11>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
mlahb: ahb {
|
|
compatible = "st,mlahb", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
dma-ranges = <0x00000000 0x38000000 0x10000>,
|
|
<0x10000000 0x10000000 0x60000>,
|
|
<0x30000000 0x30000000 0x60000>;
|
|
|
|
m4_rproc: m4@10000000 {
|
|
compatible = "st,stm32mp1-m4";
|
|
reg = <0x10000000 0x40000>,
|
|
<0x30000000 0x40000>,
|
|
<0x38000000 0x10000>;
|
|
resets = <&rcc MCU_R>;
|
|
st,syscfg-holdboot = <&rcc 0x10C 0x1>;
|
|
st,syscfg-tz = <&rcc 0x000 0x1>;
|
|
st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|