mirror of
https://xff.cz/git/u-boot/
synced 2025-10-01 07:21:23 +02:00
12ea40d29d
Add support for the Libre Computer aml-s905d3-cc "Solitude" board: https://libre.computer/products/aml-s905d3-cc/ The Solitude board has a Credit Card form factor, similar to the the previous "Le Potato" card, but with the Amlogic A311D SoC, MIPI DSI and CSI connectors. PoE header and a single USB2 Type-C connector replacing the microUSB one for power and USB 2.0. The board has an embedded SPI NOR flash, and EFI Capsule support is added. The GUID is dynamically generated for the board, to get it: => efidebug capsule esrt ======================================== ESRT: fw_resource_count=1 ESRT: fw_resource_count_max=1 ESRT: fw_resource_version=1 [entry 0]============================== ESRT: fw_class=4302C3CB-2502-5EFE-87E0-894A8A322893 ESRT: fw_type=unknown ESRT: fw_version=0 ESRT: lowest_supported_fw_version=0 ESRT: capsule_flags=0 ESRT: last_attempt_version=0 ESRT: last_attempt_status=success ======================================== On the host (with the aml_encrypt_g12a result binary): $ eficapsule --guid 4302C3CB-2502-5EFE-87E0-894A8A322893 -i 1 u-boot.bin u-boot.cap On the board (from USB disk containing u-boot.cap at root): => load usb 0:1 $kernel_addr_r u-boot.cap => efidebug capsule update $kernel_addr_r The binary will then be flashed on the SPI. Link: https://lore.kernel.org/r/20240920-u-boot-topic-libre-computer-solitude-alta-v1-2-8915b108840b@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.