mirror of
https://xff.cz/git/u-boot/
synced 2026-01-30 22:27:57 +01:00
f652b25fee
Update defconfig for rk3328-orangepi-r1-plus boards with new defaults. Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL. Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash of FIT images. This help indicate if there is an issue loading any of the images to DRAM or SRAM. Also add LEGACY_IMAGE_FORMAT=y to keep support for scripts. Remove SPL_I2C=y and SPL_PMIC_RK8XX=y, the related i2c and pmic nodes is not included in the SPL fdt. Add CMD_GPIO=y and CMD_REGULATOR=y to add the helpful gpio and regulator commands. Add ROCKCHIP_EFUSE=y and remove NET_RANDOM_ETHADDR=y, ethaddr and eth1addr is set based on cpuid read from eFUSE. Add SPL_DM_SEQ_ALIAS=y option to use alias sequence number in SPL. Add DM_ETH_PHY=y, PHY_GIGE=y, PHY_MOTORCOMM=y, PHY_REALTEK=y and remove &gmac2io to support reset of onboard ethernet PHYs. Also add DM_MDIO=y to ensure device tree props is used by motorcomm PHY driver. Add PHY_ROCKCHIP_INNO_USB2=y option to support the onboard USB PHY. Remove REGULATOR_PWM=y, the pwm-regulator compatible is not used. Add RNG_ROCKCHIP=y and DM_RNG=y options to support the onboard random generator. Also add missing device tree files to MAINTAINERS file. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Tianling Shen <cnsztl@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.