mirror of
https://xff.cz/git/u-boot/
synced 2025-10-31 02:15:45 +01:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
78 lines
2.8 KiB
C
78 lines
2.8 KiB
C
/*
|
|
* Copyright (c) 2004 Picture Elements, Inc.
|
|
* Stephen Williams (steve@icarus.com)
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#ident "$Id:$"
|
|
|
|
# include <common.h>
|
|
# include <pci.h>
|
|
# include "jse_priv.h"
|
|
|
|
/*
|
|
* The JSE board has an Intel 21555 non-transparent bridge for
|
|
* communication with the host. We need to render it harmless on the
|
|
* JSE side, but leave it alone on the host (primary) side. Normally,
|
|
* this will all be done before the host BIOS can gain access to the
|
|
* board, due to the Primary Access Lockout bit.
|
|
*
|
|
* The host_bridge_init function is called as a late initialization
|
|
* function, after most of the board is set up, including a PCI scan.
|
|
*/
|
|
|
|
void host_bridge_init (void)
|
|
{
|
|
/* The bridge chip is at a fixed location. */
|
|
pci_dev_t dev = PCI_BDF (0, 10, 0);
|
|
|
|
/* Set PCI Class code --
|
|
The primary side sees this class code at 0x08 in the
|
|
primary config space. This must be something other then a
|
|
bridge, or MS Windows starts doing weird stuff to me. */
|
|
pci_write_config_dword (dev, 0x48, 0x04800000);
|
|
|
|
/* Set subsystem ID --
|
|
The primary side sees this value at 0x2c. We set it here so
|
|
that the host can tell what sort of device this is:
|
|
We are a Picture Elements [0x12c5] JSE [0x008a]. */
|
|
pci_write_config_dword (dev, 0x6c, 0x008a12c5);
|
|
|
|
/* Downstream (Primary-to-Secondary) BARs are set up mostly
|
|
off. We need only the Memory-0 Bar so that the host can get
|
|
at the CSR region to set up tables and the lot. */
|
|
|
|
/* Downstream Memory 0 setup (4K for CSR) */
|
|
pci_write_config_dword (dev, 0xac, 0xfffff000);
|
|
/* Downstream Memory 1 setup (off) */
|
|
pci_write_config_dword (dev, 0xb0, 0x00000000);
|
|
/* Downstream Memory 2 setup (off) */
|
|
pci_write_config_dword (dev, 0xb4, 0x00000000);
|
|
/* Downstream Memory 3 setup (off) */
|
|
pci_write_config_dword (dev, 0xb8, 0x00000000);
|
|
|
|
/* Upstream (Secondary-to-Primary) BARs are used to get at
|
|
host memory from the JSE card. Create two regions: a small
|
|
one to manage individual word reads/writes, and a larger
|
|
one for doing bulk frame moves. */
|
|
|
|
/* Upstream Memory 0 Setup -- (BAR2) 4K non-prefetchable */
|
|
pci_write_config_dword (dev, 0xc4, 0xfffff000);
|
|
/* Upstream Memory 1 setup -- (BAR3) 4K non-prefetchable */
|
|
pci_write_config_dword (dev, 0xc8, 0xfffff000);
|
|
|
|
/* Upstream Memory 2 (BAR4) uses page translation, and is set
|
|
up in CCR1. Configure for 4K pages. */
|
|
|
|
/* Set CCR1,0 reigsters. This clears the Primary PCI Lockout
|
|
bit as well, so we are done configuring after this
|
|
point. Therefore, this must be the last step.
|
|
|
|
CC1[15:12]= 0 (disable I2O message unit)
|
|
CC1[11:8] = 0x5 (4K page size)
|
|
CC0[11] = 1 (Secondary Clock Disable: disable clock)
|
|
CC0[10] = 0 (Primary Access Lockout: allow primary access)
|
|
*/
|
|
pci_write_config_dword (dev, 0xcc, 0x05000800);
|
|
}
|