mirror of
https://xff.cz/git/u-boot/
synced 2025-10-31 18:35:42 +01:00
d7b904092d
Add following two new PCI class codes defines into pci_ids.h include file: PCI_CLASS_BRIDGE_PCI_NORMAL PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE And use these defines in all U-Boot code for describing PCI class codes for normal and subtractive PCI bridges. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
421 lines
10 KiB
C
421 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Renesas RCar Gen3 PCIEC driver
|
|
*
|
|
* Copyright (C) 2018-2019 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* Based on Linux PCIe driver for Renesas R-Car SoCs
|
|
* Copyright (C) 2014 Renesas Electronics Europe Ltd
|
|
*
|
|
* Based on:
|
|
* arch/sh/drivers/pci/pcie-sh7786.c
|
|
* arch/sh/drivers/pci/ops-sh7786.c
|
|
* Copyright (C) 2009 - 2011 Paul Mundt
|
|
*
|
|
* Author: Phil Edworthy <phil.edworthy@renesas.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <pci.h>
|
|
#include <wait_bit.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/log2.h>
|
|
|
|
#define PCIECAR 0x000010
|
|
#define PCIECCTLR 0x000018
|
|
#define CONFIG_SEND_ENABLE BIT(31)
|
|
#define TYPE0 (0 << 8)
|
|
#define TYPE1 BIT(8)
|
|
#define PCIECDR 0x000020
|
|
#define PCIEMSR 0x000028
|
|
#define PCIEINTXR 0x000400
|
|
#define PCIEPHYSR 0x0007f0
|
|
#define PHYRDY BIT(0)
|
|
#define PCIEMSITXR 0x000840
|
|
|
|
/* Transfer control */
|
|
#define PCIETCTLR 0x02000
|
|
#define CFINIT 1
|
|
#define PCIETSTR 0x02004
|
|
#define DATA_LINK_ACTIVE 1
|
|
#define PCIEERRFR 0x02020
|
|
#define UNSUPPORTED_REQUEST BIT(4)
|
|
#define PCIEMSIFR 0x02044
|
|
#define PCIEMSIALR 0x02048
|
|
#define MSIFE 1
|
|
#define PCIEMSIAUR 0x0204c
|
|
#define PCIEMSIIER 0x02050
|
|
|
|
/* root port address */
|
|
#define PCIEPRAR(x) (0x02080 + ((x) * 0x4))
|
|
|
|
/* local address reg & mask */
|
|
#define PCIELAR(x) (0x02200 + ((x) * 0x20))
|
|
#define PCIELAMR(x) (0x02208 + ((x) * 0x20))
|
|
#define LAM_PREFETCH BIT(3)
|
|
#define LAM_64BIT BIT(2)
|
|
#define LAR_ENABLE BIT(1)
|
|
|
|
/* PCIe address reg & mask */
|
|
#define PCIEPALR(x) (0x03400 + ((x) * 0x20))
|
|
#define PCIEPAUR(x) (0x03404 + ((x) * 0x20))
|
|
#define PCIEPAMR(x) (0x03408 + ((x) * 0x20))
|
|
#define PCIEPTCTLR(x) (0x0340c + ((x) * 0x20))
|
|
#define PAR_ENABLE BIT(31)
|
|
#define IO_SPACE BIT(8)
|
|
|
|
/* Configuration */
|
|
#define PCICONF(x) (0x010000 + ((x) * 0x4))
|
|
#define PMCAP(x) (0x010040 + ((x) * 0x4))
|
|
#define EXPCAP(x) (0x010070 + ((x) * 0x4))
|
|
#define VCCAP(x) (0x010100 + ((x) * 0x4))
|
|
|
|
/* link layer */
|
|
#define IDSETR1 0x011004
|
|
#define TLCTLR 0x011048
|
|
#define MACSR 0x011054
|
|
#define SPCHGFIN BIT(4)
|
|
#define SPCHGFAIL BIT(6)
|
|
#define SPCHGSUC BIT(7)
|
|
#define LINK_SPEED (0xf << 16)
|
|
#define LINK_SPEED_2_5GTS (1 << 16)
|
|
#define LINK_SPEED_5_0GTS (2 << 16)
|
|
#define MACCTLR 0x011058
|
|
#define SPEED_CHANGE BIT(24)
|
|
#define SCRAMBLE_DISABLE BIT(27)
|
|
#define MACS2R 0x011078
|
|
#define MACCGSPSETR 0x011084
|
|
#define SPCNGRSN BIT(31)
|
|
|
|
/* R-Car H1 PHY */
|
|
#define H1_PCIEPHYADRR 0x04000c
|
|
#define WRITE_CMD BIT(16)
|
|
#define PHY_ACK BIT(24)
|
|
#define RATE_POS 12
|
|
#define LANE_POS 8
|
|
#define ADR_POS 0
|
|
#define H1_PCIEPHYDOUTR 0x040014
|
|
|
|
/* R-Car Gen2 PHY */
|
|
#define GEN2_PCIEPHYADDR 0x780
|
|
#define GEN2_PCIEPHYDATA 0x784
|
|
#define GEN2_PCIEPHYCTRL 0x78c
|
|
|
|
#define INT_PCI_MSI_NR 32
|
|
|
|
#define RCONF(x) (PCICONF(0) + (x))
|
|
#define RPMCAP(x) (PMCAP(0) + (x))
|
|
#define REXPCAP(x) (EXPCAP(0) + (x))
|
|
#define RVCCAP(x) (VCCAP(0) + (x))
|
|
|
|
#define PCIE_CONF_BUS(b) (((b) & 0xff) << 24)
|
|
#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 19)
|
|
#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 16)
|
|
|
|
#define RCAR_PCI_MAX_RESOURCES 4
|
|
#define MAX_NR_INBOUND_MAPS 6
|
|
|
|
enum {
|
|
RCAR_PCI_ACCESS_READ,
|
|
RCAR_PCI_ACCESS_WRITE,
|
|
};
|
|
|
|
struct rcar_gen3_pcie_priv {
|
|
fdt_addr_t regs;
|
|
};
|
|
|
|
static void rcar_rmw32(struct udevice *dev, int where, u32 mask, u32 data)
|
|
{
|
|
struct rcar_gen3_pcie_priv *priv = dev_get_plat(dev);
|
|
int shift = 8 * (where & 3);
|
|
|
|
clrsetbits_le32(priv->regs + (where & ~3),
|
|
mask << shift, data << shift);
|
|
}
|
|
|
|
static u32 rcar_read_conf(const struct udevice *dev, int where)
|
|
{
|
|
struct rcar_gen3_pcie_priv *priv = dev_get_plat(dev);
|
|
int shift = 8 * (where & 3);
|
|
|
|
return readl(priv->regs + (where & ~3)) >> shift;
|
|
}
|
|
|
|
static int rcar_pcie_config_access(const struct udevice *udev,
|
|
unsigned char access_type,
|
|
pci_dev_t bdf, int where, ulong *data)
|
|
{
|
|
struct rcar_gen3_pcie_priv *priv = dev_get_plat(udev);
|
|
u32 reg = where & ~3;
|
|
|
|
/* Root bus */
|
|
if (PCI_DEV(bdf) == 0) {
|
|
if (access_type == RCAR_PCI_ACCESS_READ)
|
|
*data = readl(priv->regs + PCICONF(where / 4));
|
|
else
|
|
writel(*data, priv->regs + PCICONF(where / 4));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Clear errors */
|
|
clrbits_le32(priv->regs + PCIEERRFR, 0);
|
|
|
|
/* Set the PIO address */
|
|
writel((bdf << 8) | reg, priv->regs + PCIECAR);
|
|
|
|
/* Enable the configuration access */
|
|
if (!PCI_BUS(bdf))
|
|
writel(CONFIG_SEND_ENABLE | TYPE0, priv->regs + PCIECCTLR);
|
|
else
|
|
writel(CONFIG_SEND_ENABLE | TYPE1, priv->regs + PCIECCTLR);
|
|
|
|
/* Check for errors */
|
|
if (readl(priv->regs + PCIEERRFR) & UNSUPPORTED_REQUEST)
|
|
return -ENODEV;
|
|
|
|
/* Check for master and target aborts */
|
|
if (rcar_read_conf(udev, RCONF(PCI_STATUS)) &
|
|
(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT))
|
|
return -ENODEV;
|
|
|
|
if (access_type == RCAR_PCI_ACCESS_READ)
|
|
*data = readl(priv->regs + PCIECDR);
|
|
else
|
|
writel(*data, priv->regs + PCIECDR);
|
|
|
|
/* Disable the configuration access */
|
|
writel(0, priv->regs + PCIECCTLR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_gen3_pcie_addr_valid(pci_dev_t d, uint where)
|
|
{
|
|
u32 slot;
|
|
|
|
if (PCI_BUS(d))
|
|
return -EINVAL;
|
|
|
|
if (PCI_FUNC(d))
|
|
return -EINVAL;
|
|
|
|
slot = PCI_DEV(d);
|
|
if (slot > 1)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_gen3_pcie_read_config(const struct udevice *dev, pci_dev_t bdf,
|
|
uint where, ulong *val,
|
|
enum pci_size_t size)
|
|
{
|
|
ulong reg;
|
|
int ret;
|
|
|
|
ret = rcar_gen3_pcie_addr_valid(bdf, where);
|
|
if (ret) {
|
|
*val = pci_get_ff(size);
|
|
return 0;
|
|
}
|
|
|
|
ret = rcar_pcie_config_access(dev, RCAR_PCI_ACCESS_READ,
|
|
bdf, where, ®);
|
|
if (ret != 0)
|
|
reg = 0xffffffffUL;
|
|
|
|
*val = pci_conv_32_to_size(reg, where, size);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rcar_gen3_pcie_write_config(struct udevice *dev, pci_dev_t bdf,
|
|
uint where, ulong val,
|
|
enum pci_size_t size)
|
|
{
|
|
ulong data;
|
|
int ret;
|
|
|
|
ret = rcar_gen3_pcie_addr_valid(bdf, where);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data = pci_conv_32_to_size(val, where, size);
|
|
|
|
ret = rcar_pcie_config_access(dev, RCAR_PCI_ACCESS_WRITE,
|
|
bdf, where, &data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rcar_gen3_pcie_wait_for_phyrdy(struct udevice *dev)
|
|
{
|
|
struct rcar_gen3_pcie_priv *priv = dev_get_plat(dev);
|
|
|
|
return wait_for_bit_le32((void *)priv->regs + PCIEPHYSR, PHYRDY,
|
|
true, 50, false);
|
|
}
|
|
|
|
static int rcar_gen3_pcie_wait_for_dl(struct udevice *dev)
|
|
{
|
|
struct rcar_gen3_pcie_priv *priv = dev_get_plat(dev);
|
|
|
|
return wait_for_bit_le32((void *)priv->regs + PCIETSTR,
|
|
DATA_LINK_ACTIVE, true, 50, false);
|
|
}
|
|
|
|
static int rcar_gen3_pcie_hw_init(struct udevice *dev)
|
|
{
|
|
struct rcar_gen3_pcie_priv *priv = dev_get_plat(dev);
|
|
int ret;
|
|
|
|
/* Begin initialization */
|
|
writel(0, priv->regs + PCIETCTLR);
|
|
|
|
/* Set mode */
|
|
writel(1, priv->regs + PCIEMSR);
|
|
|
|
ret = rcar_gen3_pcie_wait_for_phyrdy(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Initial header for port config space is type 1, set the device
|
|
* class to match. Hardware takes care of propagating the IDSETR
|
|
* settings, so there is no need to bother with a quirk.
|
|
*/
|
|
writel(PCI_CLASS_BRIDGE_PCI_NORMAL << 8, priv->regs + IDSETR1);
|
|
|
|
/*
|
|
* Setup Secondary Bus Number & Subordinate Bus Number, even though
|
|
* they aren't used, to avoid bridge being detected as broken.
|
|
*/
|
|
rcar_rmw32(dev, RCONF(PCI_SECONDARY_BUS), 0xff, 1);
|
|
rcar_rmw32(dev, RCONF(PCI_SUBORDINATE_BUS), 0xff, 1);
|
|
|
|
/* Initialize default capabilities. */
|
|
rcar_rmw32(dev, REXPCAP(0), 0xff, PCI_CAP_ID_EXP);
|
|
rcar_rmw32(dev, REXPCAP(PCI_EXP_FLAGS),
|
|
PCI_EXP_FLAGS_TYPE, PCI_EXP_TYPE_ROOT_PORT << 4);
|
|
rcar_rmw32(dev, RCONF(PCI_HEADER_TYPE), 0x7f,
|
|
PCI_HEADER_TYPE_BRIDGE);
|
|
|
|
/* Enable data link layer active state reporting */
|
|
rcar_rmw32(dev, REXPCAP(PCI_EXP_LNKCAP),
|
|
PCI_EXP_LNKCAP_DLLLARC, PCI_EXP_LNKCAP_DLLLARC);
|
|
|
|
/* Write out the physical slot number = 0 */
|
|
rcar_rmw32(dev, REXPCAP(PCI_EXP_SLTCAP),
|
|
PCI_EXP_SLTCAP_PSN, 0);
|
|
|
|
/* Set the completion timer timeout to the maximum 50ms. */
|
|
rcar_rmw32(dev, TLCTLR + 1, 0x3f, 50);
|
|
|
|
/* Terminate list of capabilities (Next Capability Offset=0) */
|
|
rcar_rmw32(dev, RVCCAP(0), 0xfff00000, 0);
|
|
|
|
/* Finish initialization - establish a PCI Express link */
|
|
writel(CFINIT, priv->regs + PCIETCTLR);
|
|
|
|
return rcar_gen3_pcie_wait_for_dl(dev);
|
|
}
|
|
|
|
static int rcar_gen3_pcie_probe(struct udevice *dev)
|
|
{
|
|
struct rcar_gen3_pcie_priv *priv = dev_get_plat(dev);
|
|
struct pci_controller *hose = dev_get_uclass_priv(dev);
|
|
struct clk pci_clk;
|
|
u32 mask;
|
|
int i, cnt, ret;
|
|
|
|
ret = clk_get_by_index(dev, 0, &pci_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_enable(&pci_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < hose->region_count; i++) {
|
|
if (hose->regions[i].flags != PCI_REGION_SYS_MEMORY)
|
|
continue;
|
|
|
|
if (hose->regions[i].phys_start == 0)
|
|
continue;
|
|
|
|
mask = (roundup_pow_of_two(hose->regions[i].size) - 1) & ~0xf;
|
|
mask |= LAR_ENABLE;
|
|
writel(rounddown_pow_of_two(hose->regions[i].phys_start),
|
|
priv->regs + PCIEPRAR(0));
|
|
writel(rounddown_pow_of_two(hose->regions[i].phys_start),
|
|
priv->regs + PCIELAR(0));
|
|
writel(mask, priv->regs + PCIELAMR(0));
|
|
break;
|
|
}
|
|
|
|
writel(0, priv->regs + PCIEPRAR(1));
|
|
writel(0, priv->regs + PCIELAR(1));
|
|
writel(0, priv->regs + PCIELAMR(1));
|
|
|
|
ret = rcar_gen3_pcie_hw_init(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0, cnt = 0; i < hose->region_count; i++) {
|
|
if (hose->regions[i].flags == PCI_REGION_SYS_MEMORY)
|
|
continue;
|
|
|
|
writel(0, priv->regs + PCIEPTCTLR(cnt));
|
|
writel((hose->regions[i].size - 1) & ~0x7f,
|
|
priv->regs + PCIEPAMR(cnt));
|
|
writel(upper_32_bits(hose->regions[i].phys_start),
|
|
priv->regs + PCIEPAUR(cnt));
|
|
writel(lower_32_bits(hose->regions[i].phys_start),
|
|
priv->regs + PCIEPALR(cnt));
|
|
mask = PAR_ENABLE;
|
|
if (hose->regions[i].flags == PCI_REGION_IO)
|
|
mask |= IO_SPACE;
|
|
writel(mask, priv->regs + PCIEPTCTLR(cnt));
|
|
|
|
cnt++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_gen3_pcie_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct rcar_gen3_pcie_priv *priv = dev_get_plat(dev);
|
|
|
|
priv->regs = devfdt_get_addr_index(dev, 0);
|
|
if (!priv->regs)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_pci_ops rcar_gen3_pcie_ops = {
|
|
.read_config = rcar_gen3_pcie_read_config,
|
|
.write_config = rcar_gen3_pcie_write_config,
|
|
};
|
|
|
|
static const struct udevice_id rcar_gen3_pcie_ids[] = {
|
|
{ .compatible = "renesas,pcie-rcar-gen3" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rcar_gen3_pcie) = {
|
|
.name = "rcar_gen3_pcie",
|
|
.id = UCLASS_PCI,
|
|
.of_match = rcar_gen3_pcie_ids,
|
|
.ops = &rcar_gen3_pcie_ops,
|
|
.probe = rcar_gen3_pcie_probe,
|
|
.of_to_plat = rcar_gen3_pcie_of_to_plat,
|
|
.plat_auto = sizeof(struct rcar_gen3_pcie_priv),
|
|
};
|