mirror of
				https://xff.cz/git/u-boot/
				synced 2025-10-31 02:15:45 +01:00 
			
		
		
		
	- board/mpl/common/common_util.c
    * implement support for BZIP2 compressed images
    * various cleanups (printf -> puts, ...)
  - board/mpl/common/flash.c
    * report correct errors to upper layers
    * check the erase fail and VPP low bits in status reg
  - board/mpl/vcma9/cmd_vcma9.c
  - board/mpl/vcma9/flash.c
    * various cleanups (printf -> puts, ...)
  - common/cmd_usb.c
    * fix typo in comment
  - cpu/arm920t/usb_ohci.c
    * support for S3C2410 is missing in #if line
  - drivers/cs8900.c
    * reinit some registers in case of error (cable missing, ...)
  - fs/fat/fat.c
    * support for USB/MMC devices is missing in #if line
  - include/configs/MIP405.h
  - include/configs/PIP405.h
    * enable BZIP2 support
    * enlarge malloc space to 1MiB because of BZIP2 support
  - include/configs/VCMA9.h
    * enable BZIP2 support
    * enlarge malloc space to 1MiB because of BZIP2 support
    * enable USB support
  - lib_arm/armlinux.c
    * change calling convention of ARM Linux kernel as
      described on http://www.arm.linux.org.uk/developer/booting.php
* Patch by Thomas Lange, 14 Nov 2003:
  Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
  support all these AMD boards.
* Patch by Thomas Lange, 14 Nov 2003:
  Workaround for mips au1x00 physical memory accesses (the au1x00
  uses a 36 bit bus internally and cannot access physical memory
  directly. Use the uncached SDRAM address instead of the physical
  one.)
		
	
		
			
				
	
	
		
			323 lines
		
	
	
		
			8.0 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			323 lines
		
	
	
		
			8.0 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Cirrus Logic CS8900A Ethernet
 | |
|  *
 | |
|  * (C) 2003 Wolfgang Denk, wd@denx.de
 | |
|  *     Extension to synchronize ethaddr environment variable
 | |
|  *     against value in EEPROM
 | |
|  *
 | |
|  * (C) Copyright 2002
 | |
|  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 | |
|  * Marius Groeger <mgroeger@sysgo.de>
 | |
|  *
 | |
|  * Copyright (C) 1999 Ben Williamson <benw@pobox.com>
 | |
|  *
 | |
|  * See file CREDITS for list of people who contributed to this
 | |
|  * project.
 | |
|  *
 | |
|  * This program is loaded into SRAM in bootstrap mode, where it waits
 | |
|  * for commands on UART1 to read and write memory, jump to code etc.
 | |
|  * A design goal for this program is to be entirely independent of the
 | |
|  * target board.  Anything with a CL-PS7111 or EP7211 should be able to run
 | |
|  * this code in bootstrap mode.  All the board specifics can be handled on
 | |
|  * the host.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  * GNU General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 | |
|  */
 | |
| 
 | |
| #include <common.h>
 | |
| #include <command.h>
 | |
| #include "cs8900.h"
 | |
| #include <net.h>
 | |
| 
 | |
| #ifdef CONFIG_DRIVER_CS8900
 | |
| 
 | |
| #if (CONFIG_COMMANDS & CFG_CMD_NET)
 | |
| 
 | |
| #undef DEBUG
 | |
| 
 | |
| /* packet page register access functions */
 | |
| 
 | |
| #ifdef CS8900_BUS32
 | |
| /* we don't need 16 bit initialisation on 32 bit bus */
 | |
| #define get_reg_init_bus(x) get_reg((x))
 | |
| #else
 | |
| static unsigned short get_reg_init_bus (int regno)
 | |
| {
 | |
| 	/* force 16 bit busmode */
 | |
| 	volatile unsigned char c;
 | |
| 
 | |
| 	c = CS8900_BUS16_0;
 | |
| 	c = CS8900_BUS16_1;
 | |
| 	c = CS8900_BUS16_0;
 | |
| 	c = CS8900_BUS16_1;
 | |
| 	c = CS8900_BUS16_0;
 | |
| 
 | |
| 	CS8900_PPTR = regno;
 | |
| 	return (unsigned short) CS8900_PDATA;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static unsigned short get_reg (int regno)
 | |
| {
 | |
| 	CS8900_PPTR = regno;
 | |
| 	return (unsigned short) CS8900_PDATA;
 | |
| }
 | |
| 
 | |
| 
 | |
| static void put_reg (int regno, unsigned short val)
 | |
| {
 | |
| 	CS8900_PPTR = regno;
 | |
| 	CS8900_PDATA = val;
 | |
| }
 | |
| 
 | |
| static void eth_reset (void)
 | |
| {
 | |
| 	int tmo;
 | |
| 	unsigned short us;
 | |
| 
 | |
| 	/* reset NIC */
 | |
| 	put_reg (PP_SelfCTL, get_reg (PP_SelfCTL) | PP_SelfCTL_Reset);
 | |
| 
 | |
| 	/* wait for 200ms */
 | |
| 	udelay (200000);
 | |
| 	/* Wait until the chip is reset */
 | |
| 
 | |
| 	tmo = get_timer (0) + 1 * CFG_HZ;
 | |
| 	while ((((us = get_reg_init_bus (PP_SelfSTAT)) & PP_SelfSTAT_InitD) == 0)
 | |
| 		   && tmo < get_timer (0))
 | |
| 		/*NOP*/;
 | |
| }
 | |
| 
 | |
| static void eth_reginit (void)
 | |
| {
 | |
| 	/* receive only error free packets addressed to this card */
 | |
| 	put_reg (PP_RxCTL, PP_RxCTL_IA | PP_RxCTL_Broadcast | PP_RxCTL_RxOK);
 | |
| 	/* do not generate any interrupts on receive operations */
 | |
| 	put_reg (PP_RxCFG, 0);
 | |
| 	/* do not generate any interrupts on transmit operations */
 | |
| 	put_reg (PP_TxCFG, 0);
 | |
| 	/* do not generate any interrupts on buffer operations */
 | |
| 	put_reg (PP_BufCFG, 0);
 | |
| 	/* enable transmitter/receiver mode */
 | |
| 	put_reg (PP_LineCTL, PP_LineCTL_Rx | PP_LineCTL_Tx);
 | |
| }
 | |
| 
 | |
| void cs8900_get_enetaddr (uchar * addr)
 | |
| {
 | |
| 	int i;
 | |
| 	unsigned char env_enetaddr[6];
 | |
| 	char *tmp = getenv ("ethaddr");
 | |
| 	char *end;
 | |
| 
 | |
| 	for (i=0; i<6; i++) {
 | |
| 		env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
 | |
| 		if (tmp)
 | |
| 			tmp = (*end) ? end+1 : end;
 | |
| 	}
 | |
| 
 | |
| 	/* verify chip id */
 | |
| 	if (get_reg_init_bus (PP_ChipID) != 0x630e)
 | |
| 		return;
 | |
| 	eth_reset ();
 | |
| 	if ((get_reg (PP_SelfST) & (PP_SelfSTAT_EEPROM | PP_SelfSTAT_EEPROM_OK)) ==
 | |
| 			(PP_SelfSTAT_EEPROM | PP_SelfSTAT_EEPROM_OK)) {
 | |
| 
 | |
| 		/* Load the MAC from EEPROM */
 | |
| 		for (i = 0; i < 6 / 2; i++) {
 | |
| 			unsigned int Addr;
 | |
| 
 | |
| 			Addr = get_reg (PP_IA + i * 2);
 | |
| 			addr[i * 2] = Addr & 0xFF;
 | |
| 			addr[i * 2 + 1] = Addr >> 8;
 | |
| 		}
 | |
| 
 | |
| 		if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
 | |
| 		    memcmp(env_enetaddr, addr, 6) != 0) {
 | |
| 			printf ("\nWarning: MAC addresses don't match:\n");
 | |
| 			printf ("\tHW MAC address:  "
 | |
| 				"%02X:%02X:%02X:%02X:%02X:%02X\n",
 | |
| 				addr[0], addr[1],
 | |
| 				addr[2], addr[3],
 | |
| 				addr[4], addr[5] );
 | |
| 			printf ("\t\"ethaddr\" value: "
 | |
| 				"%02X:%02X:%02X:%02X:%02X:%02X\n",
 | |
| 				env_enetaddr[0], env_enetaddr[1],
 | |
| 				env_enetaddr[2], env_enetaddr[3],
 | |
| 				env_enetaddr[4], env_enetaddr[5]) ;
 | |
| 			debug ("### Set MAC addr from environment\n");
 | |
| 			memcpy (addr, env_enetaddr, 6);
 | |
| 		}
 | |
| 		if (!tmp) {
 | |
| 			char ethaddr[20];
 | |
| 			sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
 | |
| 				 addr[0], addr[1],
 | |
| 				 addr[2], addr[3],
 | |
| 				 addr[4], addr[5]) ;
 | |
| 			debug ("### Set environment from HW MAC addr = \"%s\"\n",				ethaddr);
 | |
| 			setenv ("ethaddr", ethaddr);
 | |
| 		}
 | |
| 
 | |
| 	}
 | |
| }
 | |
| 
 | |
| void eth_halt (void)
 | |
| {
 | |
| 	/* disable transmitter/receiver mode */
 | |
| 	put_reg (PP_LineCTL, 0);
 | |
| 
 | |
| 	/* "shutdown" to show ChipID or kernel wouldn't find he cs8900 ... */
 | |
| 	get_reg_init_bus (PP_ChipID);
 | |
| }
 | |
| 
 | |
| int eth_init (bd_t * bd)
 | |
| {
 | |
| 
 | |
| 	/* verify chip id */
 | |
| 	if (get_reg_init_bus (PP_ChipID) != 0x630e) {
 | |
| 		printf ("CS8900 Ethernet chip not found?!\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	eth_reset ();
 | |
| 	/* set the ethernet address */
 | |
| 	put_reg (PP_IA + 0, bd->bi_enetaddr[0] | (bd->bi_enetaddr[1] << 8));
 | |
| 	put_reg (PP_IA + 2, bd->bi_enetaddr[2] | (bd->bi_enetaddr[3] << 8));
 | |
| 	put_reg (PP_IA + 4, bd->bi_enetaddr[4] | (bd->bi_enetaddr[5] << 8));
 | |
| 
 | |
| 	eth_reginit ();
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* Get a data block via Ethernet */
 | |
| extern int eth_rx (void)
 | |
| {
 | |
| 	int i;
 | |
| 	unsigned short rxlen;
 | |
| 	unsigned short *addr;
 | |
| 	unsigned short status;
 | |
| 
 | |
| 	status = get_reg (PP_RER);
 | |
| 
 | |
| 	if ((status & PP_RER_RxOK) == 0)
 | |
| 		return 0;
 | |
| 
 | |
| 	status = CS8900_RTDATA;		/* stat */
 | |
| 	rxlen = CS8900_RTDATA;		/* len */
 | |
| 
 | |
| #ifdef DEBUG
 | |
| 	if (rxlen > PKTSIZE_ALIGN + PKTALIGN)
 | |
| 		printf ("packet too big!\n");
 | |
| #endif
 | |
| 	for (addr = (unsigned short *) NetRxPackets[0], i = rxlen >> 1; i > 0;
 | |
| 		 i--)
 | |
| 		*addr++ = CS8900_RTDATA;
 | |
| 	if (rxlen & 1)
 | |
| 		*addr++ = CS8900_RTDATA;
 | |
| 
 | |
| 	/* Pass the packet up to the protocol layers. */
 | |
| 	NetReceive (NetRxPackets[0], rxlen);
 | |
| 
 | |
| 	return rxlen;
 | |
| }
 | |
| 
 | |
| /* Send a data block via Ethernet. */
 | |
| extern int eth_send (volatile void *packet, int length)
 | |
| {
 | |
| 	volatile unsigned short *addr;
 | |
| 	int tmo;
 | |
| 	unsigned short s;
 | |
| 
 | |
| retry:
 | |
| 	/* initiate a transmit sequence */
 | |
| 	CS8900_TxCMD = PP_TxCmd_TxStart_Full;
 | |
| 	CS8900_TxLEN = length;
 | |
| 
 | |
| 	/* Test to see if the chip has allocated memory for the packet */
 | |
| 	if ((get_reg (PP_BusSTAT) & PP_BusSTAT_TxRDY) == 0) {
 | |
| 		/* Oops... this should not happen! */
 | |
| #ifdef DEBUG
 | |
| 		printf ("cs: unable to send packet; retrying...\n");
 | |
| #endif
 | |
| 		for (tmo = get_timer (0) + 5 * CFG_HZ; get_timer (0) < tmo;)
 | |
| 			/*NOP*/;
 | |
| 		eth_reset ();
 | |
| 		eth_reginit ();
 | |
| 		goto retry;
 | |
| 	}
 | |
| 
 | |
| 	/* Write the contents of the packet */
 | |
| 	/* assume even number of bytes */
 | |
| 	for (addr = packet; length > 0; length -= 2)
 | |
| 		CS8900_RTDATA = *addr++;
 | |
| 
 | |
| 	/* wait for transfer to succeed */
 | |
| 	tmo = get_timer (0) + 5 * CFG_HZ;
 | |
| 	while ((s = get_reg (PP_TER) & ~0x1F) == 0) {
 | |
| 		if (get_timer (0) >= tmo)
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	/* nothing */ ;
 | |
| 	if ((s & (PP_TER_CRS | PP_TER_TxOK)) != PP_TER_TxOK) {
 | |
| #ifdef DEBUG
 | |
| 		printf ("\ntransmission error %#x\n", s);
 | |
| #endif
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void cs8900_e2prom_ready(void)
 | |
| {
 | |
| 	while(get_reg(PP_SelfST) & SI_BUSY);
 | |
| }
 | |
| 
 | |
| /***********************************************************/
 | |
| /* read a 16-bit word out of the EEPROM                    */
 | |
| /***********************************************************/
 | |
| 
 | |
| int cs8900_e2prom_read(unsigned char addr, unsigned short *value)
 | |
| {
 | |
| 	cs8900_e2prom_ready();
 | |
| 	put_reg(PP_EECMD, EEPROM_READ_CMD | addr);
 | |
| 	cs8900_e2prom_ready();
 | |
| 	*value = get_reg(PP_EEData);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| /***********************************************************/
 | |
| /* write a 16-bit word into the EEPROM                     */
 | |
| /***********************************************************/
 | |
| 
 | |
| int cs8900_e2prom_write(unsigned char addr, unsigned short value)
 | |
| {
 | |
| 	cs8900_e2prom_ready();
 | |
| 	put_reg(PP_EECMD, EEPROM_WRITE_EN);
 | |
| 	cs8900_e2prom_ready();
 | |
| 	put_reg(PP_EEData, value);
 | |
| 	put_reg(PP_EECMD, EEPROM_WRITE_CMD | addr);
 | |
| 	cs8900_e2prom_ready();
 | |
| 	put_reg(PP_EECMD, EEPROM_WRITE_DIS);
 | |
| 	cs8900_e2prom_ready();
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #endif	/* COMMANDS & CFG_NET */
 | |
| 
 | |
| #endif	/* CONFIG_DRIVER_CS8900 */
 |