mirror of
https://xff.cz/git/u-boot/
synced 2025-11-01 10:56:02 +01:00
d678a59d2d
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commitc8ffd1356d, reversing changes made to2ee6f3a5f7. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
134 lines
3.0 KiB
C
134 lines
3.0 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2015 Linaro
|
|
* Peter Griffin <peter.griffin@linaro.org>
|
|
*/
|
|
#include <asm/io.h>
|
|
#include <common.h>
|
|
#include <linux/delay.h>
|
|
#include <power/pmic.h>
|
|
#include <power/max8997_muic.h>
|
|
#include <power/hi6553_pmic.h>
|
|
#include <errno.h>
|
|
|
|
u8 *pmussi_base;
|
|
|
|
uint8_t hi6553_readb(u32 offset)
|
|
{
|
|
return readb(pmussi_base + (offset << 2));
|
|
}
|
|
|
|
void hi6553_writeb(u32 offset, uint8_t value)
|
|
{
|
|
writeb(value, pmussi_base + (offset << 2));
|
|
}
|
|
|
|
int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
|
|
{
|
|
if (check_reg(p, reg))
|
|
return -EINVAL;
|
|
|
|
hi6553_writeb(reg, (uint8_t)val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
|
|
{
|
|
if (check_reg(p, reg))
|
|
return -EINVAL;
|
|
|
|
*val = (u32)hi6553_readb(reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void hi6553_init(void)
|
|
{
|
|
int data;
|
|
|
|
hi6553_writeb(HI6553_PERI_EN_MARK, 0x1e);
|
|
hi6553_writeb(HI6553_NP_REG_ADJ1, 0);
|
|
data = HI6553_DISABLE6_XO_CLK_CONN | HI6553_DISABLE6_XO_CLK_NFC |
|
|
HI6553_DISABLE6_XO_CLK_RF1 | HI6553_DISABLE6_XO_CLK_RF2;
|
|
hi6553_writeb(HI6553_DISABLE6_XO_CLK, data);
|
|
|
|
/* configure BUCK0 & BUCK1 */
|
|
hi6553_writeb(HI6553_BUCK01_CTRL2, 0x5e);
|
|
hi6553_writeb(HI6553_BUCK0_CTRL7, 0x10);
|
|
hi6553_writeb(HI6553_BUCK1_CTRL7, 0x10);
|
|
hi6553_writeb(HI6553_BUCK0_CTRL5, 0x1e);
|
|
hi6553_writeb(HI6553_BUCK1_CTRL5, 0x1e);
|
|
hi6553_writeb(HI6553_BUCK0_CTRL1, 0xfc);
|
|
hi6553_writeb(HI6553_BUCK1_CTRL1, 0xfc);
|
|
|
|
/* configure BUCK2 */
|
|
hi6553_writeb(HI6553_BUCK2_REG1, 0x4f);
|
|
hi6553_writeb(HI6553_BUCK2_REG5, 0x99);
|
|
hi6553_writeb(HI6553_BUCK2_REG6, 0x45);
|
|
mdelay(1);
|
|
hi6553_writeb(HI6553_VSET_BUCK2_ADJ, 0x22);
|
|
mdelay(1);
|
|
|
|
/* configure BUCK3 */
|
|
hi6553_writeb(HI6553_BUCK3_REG3, 0x02);
|
|
hi6553_writeb(HI6553_BUCK3_REG5, 0x99);
|
|
hi6553_writeb(HI6553_BUCK3_REG6, 0x41);
|
|
hi6553_writeb(HI6553_VSET_BUCK3_ADJ, 0x02);
|
|
mdelay(1);
|
|
|
|
/* configure BUCK4 */
|
|
hi6553_writeb(HI6553_BUCK4_REG2, 0x9a);
|
|
hi6553_writeb(HI6553_BUCK4_REG5, 0x99);
|
|
hi6553_writeb(HI6553_BUCK4_REG6, 0x45);
|
|
|
|
/* configure LDO20 */
|
|
hi6553_writeb(HI6553_LDO20_REG_ADJ, 0x50);
|
|
|
|
hi6553_writeb(HI6553_NP_REG_CHG, 0x0f);
|
|
hi6553_writeb(HI6553_CLK_TOP0, 0x06);
|
|
hi6553_writeb(HI6553_CLK_TOP3, 0xc0);
|
|
hi6553_writeb(HI6553_CLK_TOP4, 0x00);
|
|
|
|
/* configure LDO7 & LDO10 for SD slot */
|
|
data = hi6553_readb(HI6553_LDO7_REG_ADJ);
|
|
data = (data & 0xf8) | 0x2;
|
|
hi6553_writeb(HI6553_LDO7_REG_ADJ, data);
|
|
mdelay(5);
|
|
/* enable LDO7 */
|
|
hi6553_writeb(HI6553_ENABLE2_LDO1_8, 1 << 6);
|
|
mdelay(5);
|
|
data = hi6553_readb(HI6553_LDO10_REG_ADJ);
|
|
data = (data & 0xf8) | 0x5;
|
|
hi6553_writeb(HI6553_LDO10_REG_ADJ, data);
|
|
mdelay(5);
|
|
/* enable LDO10 */
|
|
hi6553_writeb(HI6553_ENABLE3_LDO9_16, 1 << 1);
|
|
mdelay(5);
|
|
|
|
/* select 32.764KHz */
|
|
hi6553_writeb(HI6553_CLK19M2_600_586_EN, 0x01);
|
|
}
|
|
|
|
int power_hi6553_init(u8 *base)
|
|
{
|
|
static const char name[] = "HI6553 PMIC";
|
|
struct pmic *p = pmic_alloc();
|
|
|
|
if (!p) {
|
|
printf("%s: POWER allocation error!\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
p->name = name;
|
|
p->interface = PMIC_NONE;
|
|
p->number_of_regs = 44;
|
|
pmussi_base = base;
|
|
|
|
hi6553_init();
|
|
|
|
puts("HI6553 PMIC init\n");
|
|
|
|
return 0;
|
|
}
|