mirror of
https://xff.cz/git/u-boot/
synced 2026-01-09 08:39:18 +01:00
33ebcb4681
Some Linux parameters can be set automatically by U-Boot, if it knows the device being used. For example, since U-Boot knows the serial console being used, it can add parameters for earlycon and console. Add support for this. Note that this is an experimental feature and we will see how useful it turns out to be. It is very handy for ChromeOS, since otherwise it is very difficult to manually determine the UART address or port number, particularly in a script. Provide an example of how this is used with ChromeOS. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.