u-boot-megous

mirror of https://xff.cz/git/u-boot/ synced 2025-10-26 16:13:55 +01:00

Files

Breno Lima 21729bcdbd udoo_neo: Add PFUZE300 PMIC support

UDOO Neo boards has a PFUZE300 connected to I2C1 bus.

Tested on a UDOO Neo Full with "pmic PFUZE3000 dump" command.

Signed-off-by: Breno Lima <breno.lima@nxp.com>

2016-12-16 10:21:29 +01:00

neo

udoo_neo: Add PFUZE300 PMIC support

2016-12-16 10:21:29 +01:00

Kconfig

mx6: remove SYS_SOC from board Kconfig

2015-09-13 10:37:29 +02:00

MAINTAINERS

MAINTAINERS/mailmap: Update my email address

2016-01-11 11:22:43 -05:00

Makefile

…

README

udoo: Add a README file

2016-10-06 09:40:34 +02:00

udoo_spl.c

treewide: replace #include <asm/errno.h> with <linux/errno.h>

2016-09-23 17:55:42 -04:00

udoo.c

treewide: replace #include <asm/errno.h> with <linux/errno.h>

2016-09-23 17:55:42 -04:00

README

How to use U-Boot on MX6Q/DL Udoo boards
----------------------------------------

- Build U-Boot for MX6Q/DL Udoo boards:

$ make mrproper
$ make udoo_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.