mirror of
https://xff.cz/git/u-boot/
synced 2025-09-03 17:52:07 +02:00
dbab8b8e10
Hummingboard dual-lite is picking the incorrect calibration structure. Fix it so that it can boot. While at it, also fix p1_mpdgctrl1 register to match Solid-run's setting. Reported-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Andrei Gherzan <andrei@gherzan.ro>
How to use U-boot on Solid-run mx6 Hummingboard and Cubox-i ----------------------------------------------------------- - Build U-boot for Hummingboard/Cubox-i: $ make mrproper $ make mx6cuboxi_defconfig $ make This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the SD card: sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync - Flash the u-boot.img image into the SD card: sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync - Insert the SD card in the board, power it up and U-boot messages should come up.