mirror of
				https://xff.cz/git/u-boot/
				synced 2025-10-31 02:15:45 +01:00 
			
		
		
		
	This syncs drivers/ddr/marvell/a38x/ with the master branch of repository
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
up to the commit "mv_ddr: a3700: Use the right size for memset to not overflow"
d5acc10c287e40cc2feeb28710b92e45c93c702c
This patch was created by following steps:
	1. Replace all a38x files in U-Boot tree by files from upstream github
	Marvell mv-ddr-marvell repository.
	2. Run following command to omit portions not relevant for a38x, ddr3, and ddr4:
	files=drivers/ddr/marvell/a38x/*
	unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_APN806 \
		-UCONFIG_MC_STATIC -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \
		-UCONFIG_PHY_STATIC_PRINT -UCONFIG_CUSTOMER_BOARD_SUPPORT \
		-UCONFIG_A3700 -UA3900 -UA80X0 -UA70X0 -DCONFIG_ARMADA_38X -UCONFIG_ARMADA_39X \
		-UCONFIG_64BIT $files
	3. Manually change license to SPDX-License-Identifier
	(upstream license in  upstream github repository contains long license
	texts and U-Boot is using just SPDX-License-Identifier.
After applying this patch, a38x, ddr3, and ddr4 code in upstream Marvell github
repository and in U-Boot would be fully identical. So in future applying
above steps could be used to sync code again.
The only change in this patch are:
	1. Some fixes with include files.
	2. Some function return and basic type defines changes in
	mv_ddr_plat.c (to correct Marvell bug).
	3. Remove of dead code in newly copied files (as a result of the
	filter script stripping out everything other than a38x, dd3, and ddr4).
Reference:
    "ddr: marvell: a38x: Sync code with Marvell mv-ddr-marvell repository"
    107c3391b9
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
		
	
		
			
				
	
	
		
			130 lines
		
	
	
		
			4.7 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			130 lines
		
	
	
		
			4.7 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /* SPDX-License-Identifier: GPL-2.0 */
 | |
| /*
 | |
|  * Copyright (C) Marvell International Ltd. and its affiliates
 | |
|  */
 | |
| 
 | |
| #ifndef _DDR3_TRAINING_IP_FLOW_H_
 | |
| #define _DDR3_TRAINING_IP_FLOW_H_
 | |
| 
 | |
| #include "ddr3_training_ip.h"
 | |
| #include "ddr3_training_ip_db.h"
 | |
| #include "mv_ddr_plat.h"
 | |
| 
 | |
| #define KILLER_PATTERN_LENGTH		32
 | |
| #define EXT_ACCESS_BURST_LENGTH		8
 | |
| 
 | |
| #define ECC_READ_BUS_0			0
 | |
| #define ECC_PHY_ACCESS_3		3
 | |
| #define ECC_PHY_ACCESS_4		4
 | |
| #define ECC_PHY_ACCESS_8		8
 | |
| #define BUS_WIDTH_IN_BITS		8
 | |
| #define MAX_POLLING_ITERATIONS		1000000
 | |
| #define ADLL_LENGTH			32
 | |
| 
 | |
| #define GP_RSVD0_REG			0x182e0
 | |
| 
 | |
| /*
 | |
|  * DFX address Space
 | |
|  * Table 2: DFX address space
 | |
|  * Address Bits   Value   Description
 | |
|  * [31 : 20]   0x? DFX base address bases PCIe mapping
 | |
|  * [19 : 15]   0...Number_of_client-1   Client Index inside pipe.
 | |
|  *             See also Table 1 Multi_cast = 29 Broadcast = 28
 | |
|  * [14 : 13]   2'b01   Access to Client Internal Register
 | |
|  * [12 : 0]   Client Internal Register offset   See related Client Registers
 | |
|  * [14 : 13]   2'b00   Access to Ram Wrappers Internal Register
 | |
|  * [12 : 6]   0 Number_of_rams-1   Ram Index inside Client
 | |
|  * [5 : 0]   Ram Wrapper Internal Register offset   See related Ram Wrappers
 | |
|  * Registers
 | |
|  */
 | |
| 
 | |
| /* nsec */
 | |
| #define AUTO_ZQC_TIMING				15384
 | |
| 
 | |
| enum mr_number {
 | |
| 	MR_CMD0,
 | |
| 	MR_CMD1,
 | |
| 	MR_CMD2,
 | |
| 	MR_CMD3,
 | |
| #if defined(CONFIG_DDR4)
 | |
| 	MR_CMD4,
 | |
| 	MR_CMD5,
 | |
| 	MR_CMD6,
 | |
| #endif
 | |
| 	MR_LAST
 | |
| };
 | |
| 
 | |
| struct mv_ddr_mr_data {
 | |
| 	u32 cmd;
 | |
| 	u32 reg_addr;
 | |
| };
 | |
| 
 | |
| struct write_supp_result {
 | |
| 	enum hws_wl_supp stage;
 | |
| 	int is_pup_fail;
 | |
| };
 | |
| 
 | |
| int ddr3_tip_write_leveling_static_config(u32 dev_num, u32 if_id,
 | |
| 					  enum mv_ddr_freq frequency,
 | |
| 					  u32 *round_trip_delay_arr);
 | |
| int ddr3_tip_read_leveling_static_config(u32 dev_num, u32 if_id,
 | |
| 					 enum mv_ddr_freq frequency,
 | |
| 					 u32 *total_round_trip_delay_arr);
 | |
| int ddr3_tip_if_write(u32 dev_num, enum hws_access_type interface_access,
 | |
| 		      u32 if_id, u32 reg_addr, u32 data_value, u32 mask);
 | |
| int ddr3_tip_if_polling(u32 dev_num, enum hws_access_type access_type,
 | |
| 			u32 if_id, u32 exp_value, u32 mask, u32 offset,
 | |
| 			u32 poll_tries);
 | |
| int ddr3_tip_if_read(u32 dev_num, enum hws_access_type interface_access,
 | |
| 		     u32 if_id, u32 reg_addr, u32 *data, u32 mask);
 | |
| int ddr3_tip_bus_read_modify_write(u32 dev_num,
 | |
| 				   enum hws_access_type access_type,
 | |
| 				   u32 if_id, u32 phy_id,
 | |
| 				   enum hws_ddr_phy phy_type,
 | |
| 				   u32 reg_addr, u32 data_value, u32 reg_mask);
 | |
| int ddr3_tip_bus_read(u32 dev_num, u32 if_id, enum hws_access_type phy_access,
 | |
| 		      u32 phy_id, enum hws_ddr_phy phy_type, u32 reg_addr,
 | |
| 		      u32 *data);
 | |
| int ddr3_tip_bus_write(u32 dev_num, enum hws_access_type e_interface_access,
 | |
| 		       u32 if_id, enum hws_access_type e_phy_access, u32 phy_id,
 | |
| 		       enum hws_ddr_phy e_phy_type, u32 reg_addr,
 | |
| 		       u32 data_value);
 | |
| int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type e_access, u32 if_id,
 | |
| 		      enum mv_ddr_freq memory_freq);
 | |
| int ddr3_tip_adjust_dqs(u32 dev_num);
 | |
| int ddr3_tip_init_controller(u32 dev_num);
 | |
| int ddr3_tip_ext_read(u32 dev_num, u32 if_id, u32 reg_addr,
 | |
| 		      u32 num_of_bursts, u32 *addr);
 | |
| int ddr3_tip_ext_write(u32 dev_num, u32 if_id, u32 reg_addr,
 | |
| 		       u32 num_of_bursts, u32 *addr);
 | |
| int ddr3_tip_dynamic_read_leveling(u32 dev_num, u32 ui_freq);
 | |
| int mv_ddr_rl_dqs_burst(u32 dev_num, u32 if_id, u32 freq);
 | |
| int ddr3_tip_legacy_dynamic_read_leveling(u32 dev_num);
 | |
| int ddr3_tip_dynamic_per_bit_read_leveling(u32 dev_num, u32 ui_freq);
 | |
| int ddr3_tip_legacy_dynamic_write_leveling(u32 dev_num);
 | |
| int ddr3_tip_dynamic_write_leveling(u32 dev_num, int phase_remove);
 | |
| int ddr3_tip_dynamic_write_leveling_supp(u32 dev_num);
 | |
| int ddr3_tip_static_init_controller(u32 dev_num);
 | |
| int ddr3_tip_configure_phy(u32 dev_num);
 | |
| int ddr3_tip_load_pattern_to_odpg(u32 dev_num, enum hws_access_type access_type,
 | |
| 				  u32 if_id, enum hws_pattern pattern,
 | |
| 				  u32 load_addr);
 | |
| int ddr3_tip_load_pattern_to_mem(u32 dev_num, enum hws_pattern e_pattern);
 | |
| int ddr3_tip_configure_odpg(u32 dev_num, enum hws_access_type access_type,
 | |
| 			    u32 if_id, enum hws_dir direction, u32 tx_phases,
 | |
| 			    u32 tx_burst_size, u32 rx_phases,
 | |
| 			    u32 delay_between_burst, u32 rd_mode, u32 cs_num,
 | |
| 			    u32 addr_stress_jump, u32 single_pattern);
 | |
| int ddr3_tip_write_mrs_cmd(u32 dev_num, u32 *cs_mask_arr, enum mr_number mr_num, u32 data, u32 mask);
 | |
| int ddr3_tip_write_cs_result(u32 dev_num, u32 offset);
 | |
| int ddr3_tip_reset_fifo_ptr(u32 dev_num);
 | |
| int ddr3_tip_read_adll_value(u32 dev_num,
 | |
| 			     u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM],
 | |
| 			     u32 reg_addr, u32 mask);
 | |
| int ddr3_tip_write_adll_value(u32 dev_num,
 | |
| 			      u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM],
 | |
| 			      u32 reg_addr);
 | |
| int ddr3_tip_tune_training_params(u32 dev_num, struct tune_train_params *params);
 | |
| 
 | |
| #endif /* _DDR3_TRAINING_IP_FLOW_H_ */
 |