mirror of
https://xff.cz/git/u-boot/
synced 2025-09-03 17:52:07 +02:00
21e25992c8
Add new STM32 MCU boards and Documentation STM32 programmer improvements video: support several LTDC HW versions and fix data enable polarity board: fix stboard error message, consider USB cable connected when boot device is USB configs: stm32mp1: set console variable for extlinux.conf configs: stm32mp1: add support for baudrate higher than 115200 for ST-Link ARM: stm32mp: Fix Silicon version handling and ft_system_setup() phy: stm32-usbphyc: Add DT phy tuning support arm: dts: stm32mp15: alignment with v5.18 ram: Conditionally enable ASR mach-stm32mp: psci: retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend configs: Use TFTP_TSIZE on DHSOM and STMicroelectronics boards ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM pinctrl: stm32: rework GPIO holes management
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.