u-boot-megous/common/cmd_fat.c

/*
 * (C) Copyright 2002
 * Richard Jones, rjones@nexus-tech.net
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * Boot support
 */
#include <common.h>
#include <command.h>
#include <s_record.h>
#include <net.h>
#include <ata.h>
#include <asm/io.h>
#include <part.h>
#include <fat.h>
#include <fs.h>
#include <sys_partition.h>

int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	return do_load(cmdtp, flag, argc, argv, FS_TYPE_FAT);
}


U_BOOT_CMD(
	fatload,	7,	0,	do_fat_fsload,
	"load binary file from a dos filesystem",
	"<interface> [<dev[:part]>]  <addr> <filename> [bytes [pos]]\n"
	"    - Load binary file 'filename' from 'dev' on 'interface'\n"
	"      to address 'addr' from dos filesystem.\n"
	"      'pos' gives the file position to start loading from.\n"
	"      If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
	"      'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
	"      the load stops on end of file.\n"
	"      If either 'pos' or 'bytes' are not aligned to\n"
	"      ARCH_DMA_MINALIGN then a misaligned buffer warning will\n"
	"      be printed and performance will suffer for the load."
);

int do_aw_fat_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	return do_aw_load(cmdtp, flag, argc, argv, FS_TYPE_FAT);
}

U_BOOT_CMD(
	aw_fatload,	7,	0,	do_aw_fat_fsload,
	"load binary file from a dos filesystem",
	"<interface> [<dev[:part]>]  <addr> <filename> [bytes [pos]]\n"
	"    - Load binary file 'filename' from 'dev' on 'interface'\n"
	"      to address 'addr' from dos filesystem.\n"
	"      'pos' gives the file position to start loading from.\n"
	"      If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
	"      'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
	"      the load stops on end of file.\n"
	"      If either 'pos' or 'bytes' are not aligned to\n"
	"      ARCH_DMA_MINALIGN then a misaligned buffer warning will\n"
	"      be printed and performance will suffer for the load."
);

int aw_fat_fsload(char *part_name, char *file_name, char* load_addr, ulong length)
{
	int part_no;
	char part_num[16] = {0};
	char filename[32] = {0};
	char read_addr[32] = {0};
	char len[16] = {0};
	unsigned int read_bytes = 0;

	part_no = sunxi_partition_get_partno_byname(part_name);
	if(part_no < 0)
	{
		printf("no the part:%s\n", part_name);
		return -1;
	}

	char * temp_argv[6] = { "fatload", "sunxi_flash", part_num, "00000000", filename, len};

	sprintf(part_num, "%x:0", part_no);
	temp_argv[2] = part_num;

	sprintf(read_addr, "%lx", (ulong)load_addr);
	temp_argv[3] = read_addr;

	memset(filename, 0, 32);
	strcpy(filename, file_name);

	sprintf(len, "%ld", length);
	temp_argv[5] = len;

	read_bytes = do_aw_fat_fsload(0, 0, 5, temp_argv);
	if(read_bytes <= 0)
	{
		printf("do_aw_fat_fsload: unable to open file %s\n", temp_argv[4]);
		return -1;
	}

	return read_bytes;
}

static int do_fat_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	return do_ls(cmdtp, flag, argc, argv, FS_TYPE_FAT);
}

U_BOOT_CMD(
	fatls,	4,	1,	do_fat_ls,
	"list files in a directory (default /)",
	"<interface> [<dev[:part]>] [directory]\n"
	"    - list files from 'dev' on 'interface' in a 'directory'"
);

static int do_fat_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc,
			 char * const argv[])
{
	int dev, part;
	block_dev_desc_t *dev_desc;
	disk_partition_t info;

	if (argc < 2) {
		printf("usage: fatinfo <interface> [<dev[:part]>]\n");
		return 0;
	}

	part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
	if (part < 0)
		return 1;

	dev = dev_desc->dev;
	if (fat_set_blk_dev(dev_desc, &info) != 0) {
		printf("\n** Unable to use %s %d:%d for fatinfo **\n",
			argv[1], dev, part);
		return 1;
	}
	return file_fat_detectfs();
}

U_BOOT_CMD(
	fatinfo,	3,	1,	do_fat_fsinfo,
	"print information about filesystem",
	"<interface> [<dev[:part]>]\n"
	"    - print information about filesystem from 'dev' on 'interface'"
);

#ifdef CONFIG_FAT_WRITE
static int do_fat_fswrite(cmd_tbl_t *cmdtp, int flag,
		int argc, char * const argv[])
{
	long size;
	unsigned long addr;
	unsigned long count;
	block_dev_desc_t *dev_desc = NULL;
	disk_partition_t info;
	int dev = 0;
	int part = 1;
	void *buf;

	if (argc < 5)
		return cmd_usage(cmdtp);

	part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
	if (part < 0)
		return 1;

	dev = dev_desc->dev;

	if (fat_set_blk_dev(dev_desc, &info) != 0) {
		printf("\n** Unable to use %s %d:%d for fatwrite **\n",
			argv[1], dev, part);
		return 1;
	}
	addr = simple_strtoul(argv[3], NULL, 16);
	count = simple_strtoul(argv[5], NULL, 16);

	buf = map_sysmem(addr, count);
	size = file_fat_write(argv[4], buf, count);
	unmap_sysmem(buf);
	if (size == -1) {
		printf("\n** Unable to write \"%s\" from %s %d:%d **\n",
			argv[4], argv[1], dev, part);
		return 1;
	}

	printf("%ld bytes written\n", size);

	return 0;
}

U_BOOT_CMD(
	fatwrite,	6,	0,	do_fat_fswrite,
	"write file into a dos filesystem",
	"<interface> <dev[:part]> <addr> <filename> <bytes>\n"
	"    - write file 'filename' from the address 'addr' in RAM\n"
	"      to 'dev' on 'interface'"
);
#endif