- Add Libre Computer boards into proper libre-computer board directory
- Add new Boards:
- Libre Computer aml-s905d3-cc
- Libre Computer aml-a311d-cc
- Add capsule update to libretech-ac and the new boards since they have an onboard SPI nor flash
- Fix HDMI support after sync to v6.11 and regulator enable from Marek
- Fix khadas-vim3 android config for android-mainline kernel
- Disable meson64 boot targets when configs are not eavailable
Add support for the Libre Computer aml-s905d3-cc "Solitude" board:
https://libre.computer/products/aml-s905d3-cc/
The Solitude board has a Credit Card form factor, similar to the
the previous "Le Potato" card, but with the Amlogic A311D SoC,
MIPI DSI and CSI connectors. PoE header and a single USB2 Type-C
connector replacing the microUSB one for power and USB 2.0.
The board has an embedded SPI NOR flash, and EFI Capsule support
is added.
The GUID is dynamically generated for the board, to get it:
=> efidebug capsule esrt
========================================
ESRT: fw_resource_count=1
ESRT: fw_resource_count_max=1
ESRT: fw_resource_version=1
[entry 0]==============================
ESRT: fw_class=4302C3CB-2502-5EFE-87E0-894A8A322893
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
========================================
On the host (with the aml_encrypt_g12a result binary):
$ eficapsule --guid 4302C3CB-2502-5EFE-87E0-894A8A322893 -i 1 u-boot.bin u-boot.cap
On the board (from USB disk containing u-boot.cap at root):
=> load usb 0:1 $kernel_addr_r u-boot.cap
=> efidebug capsule update $kernel_addr_r
The binary will then be flashed on the SPI.
Link: https://lore.kernel.org/r/20240920-u-boot-topic-libre-computer-solitude-alta-v1-2-8915b108840b@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add support for the Libre Computer aml-a311d-cc "Alta" board:
https://libre.computer/products/aml-a311d-cc/
The Alta board has a Credit Card form factor, similar to the
the prvevious "Le Potato" card, but with the Amlogic A311D SoC,
MIPI DSI and CSI connectors. PoE header and a single USB2 Type-C
connector replacing the microUSB one for power and USB 2.0.
The board has an embedded SPI NOR flash, and EFI Capsule support
is added.
The GUID is dynamically generated for the board, to get it:
=> efidebug capsule esrt
========================================
ESRT: fw_resource_count=1
ESRT: fw_resource_count_max=1
ESRT: fw_resource_version=1
[entry 0]==============================
ESRT: fw_class=17E07D9D-4D91-53F4-8780-1D91F279C1A5
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
========================================
On the host (with the aml_encrypt_g12a result binary):
$ eficapsule --guid 17E07D9D-4D91-53F4-8780-1D91F279C1A5 -i 1 u-boot.bin u-boot.cap
On the board (from USB disk containing u-boot.cap at root):
=> load usb 0:1 $kernel_addr_r u-boot.cap
=> efidebug capsule update $kernel_addr_r
The binary will then be flashed on the SPI.
Link: https://lore.kernel.org/r/20240920-u-boot-topic-libre-computer-solitude-alta-v1-1-8915b108840b@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This switches all boards with the Allwinner H616/H618/H313/H700 SoCs over to
use OF_UPSTREAM. We are doing it for this SoC family only since the DTs
between the U-Boot and the kernel repo are exactly identical, whereas other
families have one compatibility fix in U-Boot to allow booting older kernels.
Other will follow if this plays out well.
The biggest chunk otherwise is adding support for an Anbernic game console,
using the H700 SoC. For that we need to enhance the DRAM support code, and
pick two DT commits from the mainline kernel/DT rebasing repo, followed
by the defconfig patch.
On top of that two small fixes for the old Allwinner A80.
Gitlab CI passed, and I booted that briefly on some boards, including an
H616 and an H618 one (with LPDDR4).
Assorted Tegra enhancements. Merged with the recent XPL_BUILD changes,
resolve some whitespace issues and fix the name of the new apalis-tk1
env file by Tom.
Signed-off-by: Tom Rini <trini@konsulko.com>
Buildman has difficulties with constructing multi-dtb images, so
let's add a temporary custom recipe for it.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Device tree for this board can be deleted. Device tree location
now points to the freescale/ directory.
Use absolute path to PMIC node entry and its regulators as
device tree in kernel does not provide corresponding labels
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This board clearly develops first in Linux which had more
hardware listed, so let's start to use OF_UPSTREAM.
This makes the NAND driver work.
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Simon Glass <sjg@chromium.org> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
With the recent "old-style sunxi" sync and the penultimate OF_UPSTREAM DT
update, both directories were based on the same v6.10 kernel tree.
And while there is one subtle difference in many Allwinner SoC's DT
files, the H616 ones turn out to be identical.
Remove the old copies of the H616 related .dts and .dtsi files, and
switch the whole H616 SoC over to use OF_UPSTREAM. This immediately
benefits from the recent upstream DT update, to kernel v6.11.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
During DT sync with kernel 6.6, AVS feature was removed by mistake.
So adding back AVS feature.
Fixes: df73e791ce09("arm: dts: j7200: dts sync with Linux 6.6-rc1")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
The eMMC device on imx8mm-cl-iot-gate seems not support hs400.
When booting 6.1.0 kernel we got the following error.
mmc2: mmc_select_hs400es failed, error -110
mmc2: error -110 whilst initialising MMC card
Add no-mmc-hs400 to mmc2 node solves the problem.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Add support for DH electronics i.MX8MP DHCOM SoM on DRC02 carrier board.
This system is populated with two ethernet ports, two CANs, RS485 and RS232,
USB, capacitive buttons and an OLED display.
Matching Linux kernel patch has been posted:
https://lore.kernel.org/imx/20240925160343.84388-2-marex@denx.de/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Add support for DH electronics i.MX8M Plus DHCOM SoM on PicoITX carrier board.
This system is populated with serial console, EQoS ethernet, eMMC, SD, SPI NOR,
LEDs and USB 3.0 host used in USB 2.0 mode on PicoITX.
Matching Linux kernel patch has been posted:
https://lore.kernel.org/imx/20240928234949.357893-2-marex@denx.de/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Oliver Gaskell <Oliver.Gaskell@analog.com> says:
ADSP-SC5xx is a series of ARM-based DSPs.
This comprises the armv7 based SC57x, SC58x and SC594 series, and the
armv8 based SC598.
This patch series includes configurations, init code, and minimal DTs
to enable Analog Devices' evaluation boards for these SoCs to boot
through SPL and into U-Boot Proper, as well as devicetree schemas for
the added DTs.
This patch series depends on ("arm: Add Analog Devices SC5xx Machine
Type") (https://lists.denx.de/pipermail/u-boot/2024-April/552043.html)
Adds minimal device tree for Analog Devices' SC573-EZKIT board and
common files for the SC57x/SC5xx family.
This also adds all sc5* devicetrees to ARM SC5XX in MAINTAINERS, and
adds the ADSP Linux mailing list as the list for ARM SC5XX.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Maintain backward compatibility with pre-binman u-boot file naming,
the U-Boot fitImage used to be named u-boot.itb before, restore the
file name after binman conversion.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
beagleboneai64 boot was broken after OF_UPSTREAM support for
J721E SOC.
So add bootph in chipid node similar to other boards of
this SOC.
Fixes: 46bb1405b4 ("arm: dts: k3-j721e: Move to OF_UPSTREAM")
Reported-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Generic understanding/consideration is that phy-mode as sgmi means that the
internal PCS(Physical Coding Sublayer) should be enabled by default.
Xilinx GEM implementation allows configuration GEM (gmii mode) + PL PCS PMA
(sgmii mode, Physical Medum Attachment) but in this case phy-mode should be
setup as gmii.
The reason for this assumption is that phy-mode should be described based
on GEM configuration not based on mode coming out of PHY.
Also Linux kernel automatically setting up PCSSEL bit when phy mode is
sgmii without a need to specified additional DT propety.
All our DTSes with sgmii phy mode have this flag enabled that's why there
is no need/reason to just duplicate information.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2ecdbcc4ce692e2f8b3e7054a2abab35f6c03a69.1726213052.git.michal.simek@amd.com
Linux commits:
15d16d6dadf6 kbuild: Add generic rule to apply fdtoverlay
44f87191d105 kbuild: parameterize the .o part of suffix-search
The Linux commit 15d16d6dadf6 adds a generic rule in Makefile.lib
to automatically apply fdtoverlay, so that each platform doesn't
need to include a complex rule. This also automatically appends
DTC_FLAGS_foo_base += -@ to all base files
The platform's Makefile only needs to have this now:
foo-dtbs := foo_base.dtb foo_overlay1.dtbo foo_overlay2.dtbo
dtb-y := foo.dtb
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240906070808.1045991-2-prasad.kummari@amd.com
Add support for the Comvetia i.MX6Q LXR2 board, which is
uses the Phytec PFLA02 SoM.
Based on the original work from Stefano Babic <sbabic@denx.de>.
The Phytec PFLA02 devicetrees are taken from kernel 6.11-rc7.
The imx6q-lxr.dts has been submitted upstream:
https://lore.kernel.org/linux-devicetree/20240913200906.1753458-3-festevam@gmail.com/
After it gets accepted in mainline (most likely in kernel 6.13),
the lxr2 board can then be switched to OF_UPSTREAM and these device trees
can be removed from U-Boot.
Signed-off-by: Fabio Estevam <festevam@denx.de>
As per the maintainers at egnite GmbH, they are no longer interested in
supporting this board. Go and remove the platform here. Furthermore,
this is the only AT91SAM9XE platform in-tree so remove supporting code
for that as well.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Since commit 37e50627ef ("ARM: dts: imx: Convert i.MX8M flash.bin
image generation to binman") the imx8mq-evk fails to boot:
U-Boot SPL 2024.10-rc4 (Sep 09 2024 - 16:08:22 -0300)
PMIC: PFUZE100 ID=0x10
SEC0: RNG instantiated
Normal Boot
Trying to boot from MMC2
Fix it by passing the offset property for the FIT image, just like
it is done on i.MX8MM.
Fixes: 37e50627ef ("ARM: dts: imx: Convert i.MX8M flash.bin image generation to binman")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Marek Vasut <marex@denx.de>
The RPC SPI DT node is now part of mainline Linux DT, remove the
duplicate content from U-Boot DT extras. The SPI flash DT node name
has been changed from "spi-flash@0" to "flash@0", reflect this change
in this patch. Retain "bank-width" and "num-cs" DT properties which
are used by U-Boot. Retain "spi-rx-bus-width" and "spi-tx-bus-width"
DT properties to indicate the bus should always be operated in 1-1-1
mode as the U-Boot RPC SPI driver does not support higher bus width
modes yet.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
