The Kconfig symbols SYS_ARCH, SYS_CPU, SYS_SOC, SYS_VENDOR and
SYS_BOARD are defined in arch/Kconfig as having type string, and most
board files simply amend those definition with suitable
default "foo"
or
default "foo" if BAR
stanzas. But some also include a redundant repetition of the type.
Homogenize the code base by removing those lines.
Generated by
find arch/*/ board -name Kconfig | xargs perl -i -g -pe 's/(config SYS_(ARCH|CPU|SOC|VENDOR|BOARD)\n)\s*string\n/\1/gs'
with the trailing slash in arch/*/ ensuring that arch/Kconfig itself
is not found.
This does not change boards which add a prompt string, e.g.
string "Board name"
because I think those change the semantics of the symbol into being
user-settable.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
As per the maintainers at egnite GmbH, they are no longer interested in
supporting this board. Go and remove the platform here. Furthermore,
this is the only AT91SAM9XE platform in-tree so remove supporting code
for that as well.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
The commit mentioned in Fixes broke the
CONFIG_DEVICE_TREE_INCLUDES feature, with the result that any board
setting any non-empty value for that fails to build.
The parent of the mentioned commit refactoring a bit by introducing
the dtsi_include_list variable and changing cmd_dtc to loop over that
was fine.
However, the .dtsi files mentioned in CONFIG_DEVICE_TREE_INCLUDES are
not supposed to be generated via the build system. They are meant for
e.g. including a public key for verified boot (generated with the
key2dtsi script), or for injecting some stuff to the /config
node (say, a bootcmd or a load-environment setting or things like
that). The files can either live in-tree in a private branch or
completely outside, e.g. in some Yocto metadata.
But regardless, U-Boot's build system will never know anything about
them, so when the mentioned commit did
dtsi_include_list_deps = $(addprefix $(obj)/,$(subst $(quote),,$(dtsi_include_list)))
things broke, because if CONFIG_DEVICE_TREE_INCLUDES is for example
"/path/to/public_key.dtsi", this would add a dependency on
$(obj)//path/to/public_key.dtsi to each $(obj)/*.dtb target, yielding
make[3]: *** No rule to make target 'arch/arm/dts/imx6dl-aristainetos2c_7.dtb', needed by 'dtbs'. Stop.
To fix that while preserving the introduced
CONFIG_EFI_CAPSULE_ESL_FILE behaviour, disentangle
CONFIG_DEVICE_TREE_INCLUDES from dtsi_include_list from which
dtsi_include_list_deps is built, and instead just add the items
directly to the $(foreach) loop.
Fixes: a958988b62 ("scripts/Makefile.lib: Add dtsi include files as deps for building DTB")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Tested-by: Emil Kronborg <emil.kronborg@protonmail.com>
Some versions of KVM don't allow access to the cycle CSR.
Provide a command 'exception rdcycle' for testing.
If the cycle CSR is accessible, we get an output like:
=> exception rdcycle
cycle = 0x41f7563de
If the cycle CSR is not accessible, we get an output like:
=> exception rdcycle
Unhandled exception: Illegal instruction
Put subcommands into alphabetical order in long help.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
If an exception occurs in main U-Boot, show the registers. This makes
analyzing crashes especially in external applications easier.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
To minimize SPL size it is reasonable to disable SHOW_REGS. For main U-Boot
the size restrictions are much more relaxed.
* Provide separate Kconfig symbols for SPL and main U-Boot.
* Add a help text.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
These seem to be missing, and trying to build fastboot cmd without
them is causing errors due to these being missing.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Tested-by: E Shattow <lucent@gmail.com
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
For the Milk-V Mars CM (lite) we have only been copying sizeof(void *)
bytes to the compatible property instead of the whole string list.
Fixes: de3229599d ("board: add support for Milk-V Mars CM")
Reported-by: E Shattow <lucent@gmail.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The existing code is unnecessarily convoluted:
Arrays __prci_init_clocks_fu[5|7]40 are initialized with data.
In separate includes fu[5|7]40-prci.h the size of the arrays is provided as
constants.
By moving the structures prci_clk_fu[5|7]40 to the respective code modules
we can directly use ARRAY_SIZE() to access the size of the data used for
initialization.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
If multiple messages are written, line-feeds improve the readability.
Fixes: c40b6df87f ("clk: Add SiFive FU540 PRCI clock driver")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Since commit 37e50627ef ("ARM: dts: imx: Convert i.MX8M flash.bin
image generation to binman") the imx8mq-evk fails to boot:
U-Boot SPL 2024.10-rc4 (Sep 09 2024 - 16:08:22 -0300)
PMIC: PFUZE100 ID=0x10
SEC0: RNG instantiated
Normal Boot
Trying to boot from MMC2
Fix it by passing the offset property for the FIT image, just like
it is done on i.MX8MM.
Fixes: 37e50627ef ("ARM: dts: imx: Convert i.MX8M flash.bin image generation to binman")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Marek Vasut <marex@denx.de>
Various improvements to Snapdragon support:
* Bumped up the pagetable size to handle newer SoCs with much more RAM
* Made memory map parsing more robust, fixing chainloading on
SM8550/SM8650
* Populate fdt_addr_r with U-Boot's FDT by default, and set $loadaddr to
prevent
crashes with some commands which expect it
* Added initial support for SC7280/QCM6490 and the new RB3 Gen 2 board
* Add debug config fragments to enable debug UART on some SoCs.
* Enable RPMh regulators on SM8550/SM8650
* Map the cmd-db memory explicitly since it may not be in the memory map
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/22255
Implement trivial extension to the sandbox PHY, which makes it pretend
to support selecting USB Host mode and nothing else. Any other mode is
rejected with -EINVAL. Any submode except for default submode 0 is
rejected with -EOPNOTSUPP . The implementation behaves in this trivial
way to permit easy unit testing using test which is also added in this
commit.
To run the test, use e.g. sandbox64_defconfig and run U-Boot as follows:
$ ./u-boot -Tc 'ut dm phy_setup'
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The current init operation also sets the PHY into USB host mode.
Split the mode configuration into set_mode callback instead and
implement support for device and OTG modes as well.
The OTG mode performs auto-detection and selects either host or
device mode. In case the OTG mode is configured, submode field
can be used to select full PHY (re)initialization or only mode
auto-detection. The full (re)initialization is only necessary
once, on start up.
Since the OTG mode may enable IRQ generation in the PHY, disable
that IRQ generation in the exit callback again.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Extend generic_setup_phy() parameter list with PHY mode and submode and
call generic_phy_set_mode() in generic_setup_phy(), so the generic PHY
setup function can configure the PHY into correct mode before powering
the PHY up.
Update all call sites of generic_setup_phy() as well, all of which are
USB host related, except for DM test which now behaves as a USB host
test.
Note that if the PHY driver does not implement the .set_mode callback,
generic_phy_set_mode() call returns 0 and does not error out, so this
should not break any existing systems.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The RPC SPI DT node is now part of mainline Linux DT, remove the
duplicate content from U-Boot DT extras. The SPI flash DT node name
has been changed from "spi-flash@0" to "flash@0", reflect this change
in this patch. Retain "bank-width" and "num-cs" DT properties which
are used by U-Boot. Retain "spi-rx-bus-width" and "spi-tx-bus-width"
DT properties to indicate the bus should always be operated in 1-1-1
mode as the U-Boot RPC SPI driver does not support higher bus width
modes yet.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add device tree compatible string "renesas,rcar-gen4-rpc-if" to
the driver to match on upstream RPC DT node in R-Car Gen4 DTs.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Make sure RPC PHY timing registers are configured before performing
bus access. These registers might have been left unconfigured or may
have been configured by a prior stage bootloader and leaving them
unconfigured or misconfigured would interfere with U-Boot operation.
Set PHYOFFSET1 DDRTMG field to 3 which enables DDR timing adjustment
when SPIDRE or DRDRE = 0 and set PHYOFFSET2 OCTTMG field to 4 which
makes the interface operate in Serial flash or HyperFlash mode.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Make sure DRDRENR register is configured before performing external
address space read. This register might have been configured by a
prior stage bootloader and leaving it unconfigured would interfere
with U-Boot operation. Since U-Boot RPC SPI driver does not support
DDR data transfer mode yet, set this register unconditionally to 0.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Instead of writing DRDMCR with 0 first and then overwriting DRDMCR again
in case any dummy bytes have to be sent out, write DRDMCR in every case
with the amount of dummy bytes that have to be sent out. In case no dummy
bytes have to be sent out, the value written into DRDMCR is zero, so no
dummy bytes are sent out. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Instead of writing DREAR with 0 first and then overwriting DREAR again
in case of 4 byte addressing mode, write DREAR in every case once with
the correct content right away. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add device tree compatible string "renesas,rcar-gen4-rpc-if" to
the driver to match on upstream RPC DT node in R-Car Gen4 DTs.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The Python virtualenv tool sets up a few things in the environment,
putting its path first in the PATH environment variable and setting up
a sys.prefix different from the sys.base_prefix value.
At present buildman puts the toolchain path first in PATH so that it can
be found easily during the build. For sandbox this causes problems since
/usr/bin/gcc (for example) results in '/usr/bin' being prepended to the
PATH variable. As a result, the venv is partially disabled.
The result is that sandbox builds within a venv ignore the venv, e.g.
when looking for packages.
Correct this by detecting the venv and adding the toolchain path after
the venv path.
Signed-off-by: Simon Glass <sjg@chromium.org>
We already have some documentation describing how to enable debug UART
for Qualcomm SoCs. However the UART address varies per-soc... Add some
config fragments to enable debug UART for few well supported SoCs.
These can be used like:
$ make qcom_defconfig debug-sdm845.config
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The process here is almost identical to the Dragonboard 410c, we've come
full circle!
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Introduce a defconfig for the RB3 Gen 2 and other QCM6490 boards with a
dedicated uefi partition. These can replace EDK2 entirely with U-Boot.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Adjust DTS so USB runs in host mode. The type-c port is the only
supported port (since the others need PCIe). Booting from USB is
possible with a powered type-c dock.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add the PM8550 & related regulators found on the SM8550 and SM8650 platforms.
The tables are imported from the Linux driver.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
The TCS writes has no effect after the removal of the __tcs_set_trigger()
call, obviously it seems the RSC version 3 requires it to complete the transactions.
Fixes: 80c5be164a ("soc: qcom: rpmh-rsc: drop unused multi-threading and non-active TCS support")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # sm8250 rb5
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Some newer boards end up with a bunch of holes in the memory map due to
how Qualcomm's hypervisor and ABL work. The end result is 14+ memory
regions.
Bump CONFIG_NR_DRAM_BANKS to 24 so we can handle these and any future
expansion easily.
Yes, this is ridiculous, but there is no other way.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
On at least SM8650 this region might not be included in the memory map.
Use the new mmu_map_region() helper to map it during bind().
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
memcmp() can cause aborts on some platforms and generally seems to be
the wrong approach here. Use strncmp() instead which is more correct.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
In some cases we might want to map some memory region after enabling
caches. Introduce a new helper for this.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
This variable is used by default in some commands, set it to the same as
kernel_addr_r.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Set the fdt_addr_r environment variable to a region of LMB allocated
memory, and populate it by default with a copy of U-Boots FDT. This will
be used for Linux if no other DT is provided.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
We don't know at build time where a sensible place for this is, allocate
it at runtime like the other variables.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
In the typical case where we chainload from ABL, the serial number is
available in the DT bootargs. Read it out and set the serial#
environment variable so that it can be used by fastboot.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
With 14+ entries in the memory map, we need quite a bit more space for
the page tables.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The generic memory parsing code in U-Boot lacks a few things that we
need on Qualcomm:
1. It sets gd->ram_size and gd->ram_base to represent a single memory
block.
2. setup_dest_addr() later relocates U-Boot to ram_base + ram_size, the
end of that first memory block.
This results in all memory beyond U-Boot being unusable in Linux when
booting with EFI.
Since the ranges in the memory node may be out of order, the only way
for us to correctly determine the relocation address for U-Boot is to
parse all memory regions and find the highest valid address.
We can't use fdtdec_setup_memory_banksize() since it stores the result
in gd->bd which is not yet allocated.
Hence, this commit, which implements an optimised parser to read the
memory blocks and store them in the .data section where they will
survive relocation.
We set ram_base and ram_size to describe the entire address space of
memory, with the assumption that the last memory region is big enough
for U-Boot, its DTB, and heap. On all boards tested so far this seems
to be a reasonable assumption.
As a nice side effect, our fdt parsing also winds up being faster since
we avoid the overhead of checking address/size-cells or populating
struct resource. We can safely make these optimisations since we only
support ARM64, and trust the reg property to be populated correctly.
After relocation, we then populate gd->bd->bi_dram with the data we
parsed earlier.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
