Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

drivers/Makefile

@@ -14,3 +14,4 @@ obj-y += twserial/
 obj-y += video/
 obj-y += watchdog/
 obj-$(CONFIG_QE) += qe/
+obj-y += memory/

drivers/memory/Makefile

@@ -0,0 +1 @@
+obj-$(CONFIG_TI_AEMIF) += ti-aemif.o

drivers/memory/ti-aemif.c

@@ -0,0 +1,80 @@
+/*
+ * Keystone2: Asynchronous EMIF Configuration
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/ti-common/ti-aemif.h>
+
+#define AEMIF_WAITCYCLE_CONFIG		(CONFIG_AEMIF_CNTRL_BASE + 0x4)
+#define AEMIF_NAND_CONTROL		(CONFIG_AEMIF_CNTRL_BASE + 0x60)
+#define AEMIF_ONENAND_CONTROL		(CONFIG_AEMIF_CNTRL_BASE + 0x5c)
+#define AEMIF_CONFIG(cs)		(CONFIG_AEMIF_CNTRL_BASE + 0x10 \
+					 + (cs * 4))
+
+#define AEMIF_CFG_SELECT_STROBE(v)	((v) ? 1 << 31 : 0)
+#define AEMIF_CFG_EXTEND_WAIT(v)	((v) ? 1 << 30 : 0)
+#define AEMIF_CFG_WR_SETUP(v)		(((v) & 0x0f) << 26)
+#define AEMIF_CFG_WR_STROBE(v)		(((v) & 0x3f) << 20)
+#define AEMIF_CFG_WR_HOLD(v)		(((v) & 0x07) << 17)
+#define AEMIF_CFG_RD_SETUP(v)		(((v) & 0x0f) << 13)
+#define AEMIF_CFG_RD_STROBE(v)		(((v) & 0x3f) << 7)
+#define AEMIF_CFG_RD_HOLD(v)		(((v) & 0x07) << 4)
+#define AEMIF_CFG_TURN_AROUND(v)	(((v) & 0x03) << 2)
+#define AEMIF_CFG_WIDTH(v)		(((v) & 0x03) << 0)
+
+#define set_config_field(reg, field, val)			\
+	do {							\
+		if (val != -1) {				\
+			reg &= ~AEMIF_CFG_##field(0xffffffff);	\
+			reg |=	AEMIF_CFG_##field(val);		\
+		}						\
+	} while (0)
+
+static void aemif_configure(int cs, struct aemif_config *cfg)
+{
+	unsigned long tmp;
+
+	if (cfg->mode == AEMIF_MODE_NAND) {
+		tmp = __raw_readl(AEMIF_NAND_CONTROL);
+		tmp |= (1 << cs);
+		__raw_writel(tmp, AEMIF_NAND_CONTROL);
+
+	} else if (cfg->mode == AEMIF_MODE_ONENAND) {
+		tmp = __raw_readl(AEMIF_ONENAND_CONTROL);
+		tmp |= (1 << cs);
+		__raw_writel(tmp, AEMIF_ONENAND_CONTROL);
+	}
+
+	tmp = __raw_readl(AEMIF_CONFIG(cs));
+
+	set_config_field(tmp, SELECT_STROBE,	cfg->select_strobe);
+	set_config_field(tmp, EXTEND_WAIT,	cfg->extend_wait);
+	set_config_field(tmp, WR_SETUP,		cfg->wr_setup);
+	set_config_field(tmp, WR_STROBE,	cfg->wr_strobe);
+	set_config_field(tmp, WR_HOLD,		cfg->wr_hold);
+	set_config_field(tmp, RD_SETUP,		cfg->rd_setup);
+	set_config_field(tmp, RD_STROBE,	cfg->rd_strobe);
+	set_config_field(tmp, RD_HOLD,		cfg->rd_hold);
+	set_config_field(tmp, TURN_AROUND,	cfg->turn_around);
+	set_config_field(tmp, WIDTH,		cfg->width);
+
+	__raw_writel(tmp, AEMIF_CONFIG(cs));
+}
+
+void aemif_init(int num_cs, struct aemif_config *config)
+{
+	int cs;
+
+	if (num_cs > AEMIF_NUM_CS) {
+		num_cs = AEMIF_NUM_CS;
+		printf("AEMIF: csnum has to be <= 5");
+	}
+
+	for (cs = 0; cs < num_cs; cs++)
+		aemif_configure(cs, config + cs);
+}

drivers/mtd/nand/davinci_nand.c

@@ -32,8 +32,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <nand.h>
-#include <asm/arch/nand_defs.h>
-#include <asm/arch/emif_defs.h>
+#include <asm/ti-common/davinci_nand.h>
 
 /* Definitions for 4-bit hardware ECC */
 #define NAND_TIMEOUT			10240

drivers/spi/davinci_spi.c

@@ -41,7 +41,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 		break;
 #ifdef CONFIG_SYS_SPI1
 	case SPI1_BUS:
-		ds->regs = (struct davinci_spi_regs *)SPI0_BASE;
+		ds->regs = (struct davinci_spi_regs *)SPI1_BASE;
 		break;
 #endif
 #ifdef CONFIG_SYS_SPI2