Convert CONFIG_CMD_ASKENV et al to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_ASKENV
   CONFIG_CMD_BMP
   CONFIG_CMD_BOOTD
   CONFIG_CMD_CACHE
   CONFIG_CMD_CRC32
   CONFIG_CMD_DHCP
   CONFIG_CMD_ENV
   CONFIG_CMD_EXPORTENV
   CONFIG_CMD_EXT2
   CONFIG_CMD_EXT4
   CONFIG_CMD_FLASH
   CONFIG_CMD_FS_GENERIC
   CONFIG_CMD_FUSE
   CONFIG_CMD_GPIO
   CONFIG_CMD_GPT
   CONFIG_CMD_GREPENV
   CONFIG_CMD_I2C
   CONFIG_CMD_IMLS
   CONFIG_CMD_IMPORTENV
   CONFIG_CMD_LOADB
   CONFIG_CMD_LOADS
   CONFIG_CMD_MEMINFO
   CONFIG_CMD_MII
   CONFIG_CMD_MTDPARTS
   CONFIG_CMD_NAND
   CONFIG_CMD_NAND_TRIMFFS
   CONFIG_CMD_NFS
   CONFIG_CMD_PCA953X
   CONFIG_CMD_PCA953X_INFO
   CONFIG_CMD_PCI
   CONFIG_CMD_PING
   CONFIG_CMD_READ
   CONFIG_CMD_SF
   CONFIG_CMD_SPI
   CONFIG_CMD_SPL
   CONFIG_CMD_SPL_WRITE_SIZE
   CONFIG_CMD_TIME
   CONFIG_CMD_TRACE
   CONFIG_CMD_UBI
   CONFIG_CMD_UBIFS
   CONFIG_CMD_UNZIP
   CONFIG_FS_EXT4

Signed-off-by: Tom Rini <trini@konsulko.com>

README

@@ -1552,14 +1552,6 @@ The following options need to be configured:
 
 		This enable the NEW i2c subsystem, and will allow you to use
 		i2c commands at the u-boot command line (as long as you set
-		CONFIG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c
-		based realtime clock chips or other i2c devices. See
-		common/cmd_i2c.c for a description of the command line
-		interface.
-
-		ported i2c driver to the new framework:
-		- drivers/i2c/soft_i2c.c:
-		  - activate first bus with CONFIG_SYS_I2C_SOFT define
 		    CONFIG_SYS_I2C_SOFT_SPEED and CONFIG_SYS_I2C_SOFT_SLAVE
 		    for defining speed and slave address
 		  - activate second bus with I2C_SOFT_DECLARATIONS2 define

configs/am335x_shc_defconfig

@@ -40,6 +40,7 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_PINMUX is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
 CONFIG_ENV_IS_IN_MMC=y

configs/am335x_shc_ict_defconfig

@@ -41,6 +41,7 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_PINMUX is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
 CONFIG_ENV_IS_IN_MMC=y

configs/am335x_shc_netboot_defconfig

@@ -42,6 +42,7 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_PINMUX is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
 CONFIG_ENV_IS_IN_MMC=y

configs/am335x_shc_sdboot_defconfig

@@ -41,6 +41,7 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_PINMUX is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
 CONFIG_ENV_IS_IN_MMC=y

configs/apalis-tk1_defconfig

@@ -26,6 +26,7 @@ CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_NFS is not set
+CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT4_WRITE=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set

configs/apalis_imx6_defconfig

@@ -45,12 +45,16 @@ CONFIG_SYS_MEMTEST_END=0x10010000
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_NFS is not set
 CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
 CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y

configs/bcm7260_defconfig

@@ -13,10 +13,14 @@ CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="fdt addr ${fdtcontroladdr};fdt move ${fdtcontroladdr} ${fdtsaveaddr};fdt addr ${fdtsaveaddr};"
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot>"
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
-CONFIG_EFI_PARTITION=y
+CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_PRIOR_STAGE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y

configs/bcm7445_defconfig

@@ -14,11 +14,14 @@ CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="fdt addr ${fdtcontroladdr};fdt move ${fdtcontroladdr} ${fdtsaveaddr};fdt addr ${fdtsaveaddr};"
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot>"
+CONFIG_CMD_ASKENV=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF_TEST=y
 CONFIG_CMD_SPI=y
+CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
+CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_PRIOR_STAGE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y

configs/cl-som-imx7_defconfig

@@ -57,6 +57,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb"
 # CONFIG_ENV_IS_IN_MMC is not set
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_CMD_PCA953X=y
 CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y

configs/colibri_imx6_defconfig

@@ -44,12 +44,16 @@ CONFIG_SYS_MEMTEST_END=0x10010000
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_NFS is not set
 CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
 CONFIG_CMD_UUID=y
 CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y

configs/deneb_defconfig

@@ -36,13 +36,16 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\
 CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_CMD_CPU=y
+# CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_READ=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y

configs/display5_defconfig

@@ -46,6 +46,7 @@ CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="display5 > "
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_ELF is not set
+CONFIG_CMD_SPL=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_EEPROM=y

configs/display5_factory_defconfig

@@ -46,6 +46,7 @@ CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="display5 factory > "
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_ELF is not set
+CONFIG_CMD_SPL=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_EEPROM=y

configs/ds109_defconfig

@@ -18,6 +18,7 @@ CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_ISO_PARTITION=y
 CONFIG_OF_CONTROL=y
@@ -46,4 +47,3 @@ CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_FS_EXT4=y

configs/ge_bx50v3_defconfig

@@ -29,6 +29,7 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 # CONFIG_CMD_NFS is not set
+CONFIG_CMD_BMP=y
 CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_CLS=y

configs/giedi_defconfig

@@ -36,13 +36,16 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\
 CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_CMD_CPU=y
+# CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_READ=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y

configs/gurnard_defconfig

@@ -23,7 +23,10 @@ CONFIG_CMD_USB=y
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+# CONFIG_CMD_MDIO is not set
 CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-gurnard"

configs/gwventana_emmc_defconfig

@@ -40,6 +40,7 @@ CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="Ventana > "
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_SPL_WRITE_SIZE=0x20000
+CONFIG_CMD_UNZIP=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y

configs/gwventana_gw5904_defconfig

@@ -40,6 +40,7 @@ CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="Ventana > "
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_SPL_WRITE_SIZE=0x20000
+CONFIG_CMD_UNZIP=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y

configs/gwventana_nand_defconfig

@@ -42,6 +42,7 @@ CONFIG_SYS_PROMPT="Ventana > "
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_SPL_NAND_OFS=0x1100000
 CONFIG_CMD_SPL_WRITE_SIZE=0x20000
+CONFIG_CMD_UNZIP=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y

configs/imx6dl_mamoj_defconfig

@@ -13,6 +13,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_CMD_SPL=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000

configs/imx6qdl_icore_mipi_defconfig

@@ -29,6 +29,7 @@ CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="icorem6qdl-mipi> "
+CONFIG_CMD_SPL=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000

configs/imx6qdl_icore_mmc_defconfig

@@ -32,6 +32,7 @@ CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="icorem6qdl> "
+CONFIG_CMD_SPL=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000

configs/imx6qdl_icore_rqs_defconfig

@@ -26,6 +26,7 @@ CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="icorem6qdl-rqs> "
+CONFIG_CMD_SPL=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000

configs/imx8mq_evk_defconfig

@@ -17,9 +17,17 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg"
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_BOOTM_NETBSD is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+# CONFIG_CMD_MDIO is not set
+CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EXT2=y

configs/imx8mq_phanbell_defconfig

@@ -19,9 +19,16 @@ CONFIG_SD_BOOT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_BOOTM_NETBSD is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EXT2=y

configs/imx8qm_mek_defconfig

@@ -30,7 +30,9 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_BOOTM_NETBSD is not set
+# CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y

configs/imx8qm_rom7720_a1_4G_defconfig

@@ -30,6 +30,7 @@ CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMPORTENV is not set
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DM=y
+CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/imx8qxp_mek_defconfig

@@ -29,7 +29,9 @@ CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_BOOTM_NETBSD is not set
+# CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_FUSE=y

configs/ls1012a2g5rdb_qspi_defconfig

@@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012a2g5rdb_tfa_defconfig

@@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012afrdm_qspi_defconfig

@@ -21,6 +21,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012afrdm_tfa_defconfig

@@ -21,6 +21,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig

@@ -20,6 +20,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012afrwy_qspi_defconfig

@@ -21,6 +21,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig

@@ -20,6 +20,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012afrwy_tfa_defconfig

@@ -21,6 +21,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012aqds_qspi_defconfig

@@ -25,6 +25,7 @@ CONFIG_MISC_INIT_R=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012aqds_tfa_SECURE_BOOT_defconfig

@@ -23,6 +23,7 @@ CONFIG_MISC_INIT_R=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012aqds_tfa_defconfig

@@ -25,6 +25,7 @@ CONFIG_MISC_INIT_R=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012ardb_qspi_SECURE_BOOT_defconfig

@@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012ardb_qspi_defconfig

@@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012ardb_tfa_SECURE_BOOT_defconfig

@@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1012ardb_tfa_defconfig

@@ -22,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff

configs/ls1021aiot_qspi_defconfig

@@ -11,9 +11,15 @@ CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
 CONFIG_MISC_INIT_R=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+# CONFIG_CMD_MDIO is not set
 CONFIG_CMD_PING=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y

configs/ls1021aiot_sdcard_defconfig

@@ -16,9 +16,15 @@ CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+# CONFIG_CMD_MDIO is not set
 CONFIG_CMD_PING=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y

configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig

@@ -31,6 +31,7 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_CMD_IMLS=y
+CONFIG_CMD_SPL=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y

configs/ls1043ardb_sdcard_defconfig

@@ -30,6 +30,7 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_CMD_IMLS=y
+CONFIG_CMD_SPL=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y

configs/ls1088aqds_defconfig

@@ -18,15 +18,19 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"

configs/ls1088aqds_qspi_SECURE_BOOT_defconfig

@@ -20,14 +20,18 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_MDIO is not set
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"

configs/ls1088aqds_qspi_defconfig

@@ -21,14 +21,18 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_MDIO is not set
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"

configs/ls1088aqds_sdcard_ifc_defconfig

@@ -29,15 +29,19 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"

configs/ls1088aqds_sdcard_qspi_defconfig

@@ -31,14 +31,18 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_MDIO is not set
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"

configs/ls1088aqds_tfa_defconfig

@@ -24,15 +24,19 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_MDIO is not set
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"

configs/ls1088ardb_qspi_SECURE_BOOT_defconfig

@@ -21,15 +21,19 @@ CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_MDIO is not set
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"

configs/ls1088ardb_qspi_defconfig

@@ -22,15 +22,19 @@ CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_MDIO is not set
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"

configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig

@@ -33,15 +33,19 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_MDIO is not set
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"

configs/ls1088ardb_sdcard_qspi_defconfig

@@ -32,15 +32,19 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_MDIO is not set
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"

configs/ls1088ardb_tfa_SECURE_BOOT_defconfig

@@ -24,14 +24,18 @@ CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_MDIO is not set
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"

configs/ls1088ardb_tfa_defconfig

@@ -25,15 +25,19 @@ CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_MDIO is not set
+CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"

configs/mx25pdk_defconfig

@@ -9,6 +9,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg"
 CONFIG_DEFAULT_FDT_FILE="imx25-pdk.dtb"
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_FUSE=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_SETEXPR is not set

configs/mx53ppd_defconfig

@@ -20,6 +20,7 @@ CONFIG_MISC_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_DM=y
+CONFIG_CMD_FUSE=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y

configs/mx7ulp_com_defconfig

@@ -19,6 +19,7 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_READ=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_CACHE=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-com"

configs/mx7ulp_evk_defconfig

@@ -18,6 +18,7 @@ CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_CACHE=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"

configs/mx7ulp_evk_plugin_defconfig

@@ -16,6 +16,7 @@ CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_CACHE=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"

configs/pico-imx8mq_defconfig

@@ -17,9 +17,16 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg"
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_BOOTM_NETBSD is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EXT2=y

configs/s32v234evb_defconfig

@@ -14,6 +14,7 @@ CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc7c00000
 CONFIG_CMD_MMC=y
+CONFIG_CMD_CACHE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y

configs/somlabs_visionsom_6ull_defconfig

@@ -17,6 +17,7 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x88000000
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_READ=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

configs/stih410-b2260_defconfig

@@ -11,6 +11,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAS1,115200 CONSOLE=/dev/ttyAS1 consoleblank=0 root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait mem=992M@0x40000000 vmalloc=256m"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SYS_PROMPT="stih410-b2260 => "
+CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y

configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig

@@ -37,6 +37,7 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_PING=y
+CONFIG_CMD_BMP=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_BOOTSTAGE=y
 CONFIG_CMD_EXT2=y

configs/theadorable-x86-conga-qa3-e3845_defconfig

@@ -36,6 +36,7 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_PING=y
+CONFIG_CMD_BMP=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_BOOTSTAGE=y
 CONFIG_CMD_EXT2=y

configs/theadorable-x86-dfi-bt700_defconfig

@@ -34,6 +34,7 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_PING=y
+CONFIG_CMD_BMP=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_BOOTSTAGE=y
 CONFIG_CMD_EXT2=y

configs/ti816x_evm_defconfig

@@ -27,6 +27,7 @@ CONFIG_VERSION_VARIABLE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y

configs/tplink_wdr4300_defconfig

@@ -20,6 +20,8 @@ CONFIG_SYS_MEMTEST_END=0x83f00000
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+# CONFIG_CMD_MDIO is not set
 CONFIG_CMD_PING=y
 # CONFIG_ISO_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="tplink_wdr4300"

configs/vyasa-rk3288_defconfig

@@ -17,6 +17,7 @@ CONFIG_DEFAULT_FDT_FILE="rk3288-vyasa.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_CMD_SPL=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y

configs/x530_defconfig

@@ -30,6 +30,7 @@ CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
@@ -43,6 +44,8 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-385-atl-x530"
 CONFIG_ENV_ADDR=0x100000
 CONFIG_SPL_OF_TRANSLATE=y
@@ -62,7 +65,6 @@ CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y
-CONFIG_MTD_UBI=y
 CONFIG_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCI_MVEBU=y
@@ -80,4 +82,3 @@ CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_WDT=y
 CONFIG_WDT_ORION=y
-CONFIG_LZO=y

include/configs/M5249EVB.h

@@ -31,10 +31,6 @@
  */
 #undef CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
 #define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */

include/configs/M5253DEMO.h

@@ -24,10 +24,6 @@
 	. = DEFINED(env_offset) ? env_offset : .; \
 	env/embedded.o(.text*);
 
-/*
- * Command line configuration.
- */
-
 #ifdef CONFIG_IDE
 /* ATA */
 #	define CONFIG_IDE_RESET		1

include/configs/M5272C3.h

@@ -39,9 +39,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
 #ifdef CONFIG_MCFFEC
 #	define CONFIG_MII_INIT		1
 #	define CONFIG_SYS_DISCOVER_PHY

include/configs/M5282EVB.h

@@ -36,9 +36,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
 #ifdef CONFIG_MCFFEC
 #	define CONFIG_MII_INIT		1
 #	define CONFIG_SYS_DISCOVER_PHY

include/configs/MPC8308RDB.h

@@ -257,10 +257,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 /*
  * Miscellaneous configurable options
  */

include/configs/MPC8313ERDB_NAND.h

@@ -305,10 +305,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 /*
  * Miscellaneous configurable options
  */

include/configs/MPC8313ERDB_NOR.h

@@ -274,10 +274,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 /*
  * Miscellaneous configurable options
  */

include/configs/MPC8315ERDB.h

@@ -304,10 +304,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
 /*

include/configs/MPC8323ERDB.h

@@ -220,10 +220,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
 /*

include/configs/MPC832XEMDS.h

@@ -244,10 +244,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
 /*

include/configs/MPC8349EMDS.h

@@ -278,10 +278,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
 /*

include/configs/MPC8349EMDS_SDRAM.h

@@ -333,10 +333,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
 /*

include/configs/MPC837XEMDS.h

@@ -304,10 +304,6 @@ extern int board_pci_host_broken(void);
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
 #ifdef CONFIG_MMC

include/configs/MPC837XERDB.h

@@ -322,10 +322,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
 #ifdef CONFIG_MMC

include/configs/MPC8540ADS.h

@@ -288,10 +288,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
 /*

include/configs/MPC8610HPCD.h

@@ -391,10 +391,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #define CONFIG_WATCHDOG			/* watchdog enabled */
 #define CONFIG_SYS_WATCHDOG_FREQ	5000	/* Feed interval, 5s */
 

include/configs/P2041RDB.h

@@ -484,10 +484,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_LOADS_ECHO		/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
 
-/*
- * Command line configuration.
- */
-
 /*
 * USB
 */

include/configs/T4240RDB.h

@@ -248,10 +248,6 @@
 #define CONFIG_LOADS_ECHO		/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
 
-/*
- * Command line configuration.
- */
-
 /*
  * Miscellaneous configurable options
  */

include/configs/am335x_shc.h

@@ -15,9 +15,6 @@
 #include <configs/ti_am335x_common.h>
 
 /* settings we don;t want on this board */
-#undef CONFIG_CMD_SPI
-
-#define CONFIG_CMD_CACHE
 
 #ifndef CONFIG_SPL_BUILD
 # define CONFIG_TIMESTAMP

include/configs/am57xx_evm.h

@@ -40,7 +40,6 @@
 	DFU_ALT_INFO_RAM \
 	DFU_ALT_INFO_QSPI
 #else
-#undef CONFIG_CMD_BOOTD
 #ifdef CONFIG_SPL_DFU
 #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
 #define DFUARGS \

include/configs/apalis-tk1.h

@@ -143,8 +143,6 @@
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		32
 
-#define CONFIG_CMD_TIME
-
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"
 

include/configs/apalis_imx6.h

@@ -82,10 +82,6 @@
 #define CONFIG_ENV_OVERWRITE
 
 /* Command definition */
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_FLASH
 
 #undef CONFIG_IPADDR
 #define CONFIG_IPADDR			192.168.10.2
@@ -234,6 +230,4 @@
 #define CONFIG_SYS_MMC_ENV_PART		1
 #endif
 
-#define CONFIG_CMD_TIME
-
 #endif	/* __CONFIG_H */

include/configs/aspenite.h

@@ -23,13 +23,6 @@
  */
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE - 0x00200000)
 
-/*
- * Commands configuration
- */
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
 #include "mv-common.h"
 
 /*