dany/u-boot-megous
1
0
Fork 0
mirror of https://xff.cz/git/u-boot/ synced 2025-09-01 08:42:12 +02:00
Code Issues Packages Projects Releases Wiki Activity

armv8: ls1012a: RGMII ports require internal delay

Browse Source 
The correct setting for the RGMII ports on LS1012ARDB is to
enable delay on both Rx and Tx so the interface mode used should
be PHY_INTERFACE_MODE_RGMII_ID

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
Signed-off-by: Anji J <anji.jagarlmudi@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
This commit is contained in:
Chaitanya Sakinam
2020-06-09 16:21:48 +05:30
committed by Priyanka Jain
parent 3fba2311a3
commit cb1de6067a
2 changed files with 2 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
board/freescale/ls1012ardb/eth.c
View File

@@ -113,7 +113,7 @@ int pfe_eth_board_init(struct udevice *dev)
/* MAC2 */ /* MAC2 */
pfe_set_phy_address_mode(priv->gemac_port, pfe_set_phy_address_mode(priv->gemac_port,
CONFIG_PFE_EMAC2_PHY_ADDR, CONFIG_PFE_EMAC2_PHY_ADDR,
PHY_INTERFACE_MODE_RGMII_TXID); PHY_INTERFACE_MODE_RGMII_ID);
} }
break; break;
case 0x2208: case 0x2208:

2
drivers/net/pfe_eth/pfe_eth.c
View File

@@ -33,7 +33,7 @@ struct gemac_s gem_info[] = {
/* phy iface */ /* phy iface */
.phy_address = CONFIG_PFE_EMAC2_PHY_ADDR, .phy_address = CONFIG_PFE_EMAC2_PHY_ADDR,
.phy_mode = PHY_INTERFACE_MODE_RGMII_TXID, .phy_mode = PHY_INTERFACE_MODE_RGMII_ID,
}, },
}; };