treewide: convert bd_t to struct bd_info by coccinelle

The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:

  It's a **mistake** to use typedef for structures and pointers.

Besides, using typedef for structures is annoying when you try to make
headers self-contained.

Let's say you have the following function declaration in a header:

  void foo(bd_t *bd);

This is not self-contained since bd_t is not defined.

To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>

  #include <asm/u-boot.h>
  void foo(bd_t *bd);

Then, the include direcective pulls in more bloat needlessly.

If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:

  struct bd_info;
  void foo(struct bd_info *bd);

Right, typedef'ing bd_t is a mistake.

I used coccinelle to generate this commit.

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  typedef bd_t;
  @@
  -bd_t
  +struct bd_info
  </smpl>

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

board/compulab/cl-som-imx7/cl-som-imx7.c

@@ -80,7 +80,7 @@ static struct fsl_esdhc_cfg cl_som_imx7_usdhc_cfg[3] = {
 	{USDHC3_BASE_ADDR},
 };
 
-int board_mmc_init(bd_t *bis)
+int board_mmc_init(struct bd_info *bis)
 {
 	int i, ret;
 	/*
@@ -199,7 +199,7 @@ static int cl_som_imx7_handle_mac_address(char *env_var, uint eeprom_bus)
 
 #define CL_SOM_IMX7_FEC_DEV_ID_PRI 0
 
-int board_eth_init(bd_t *bis)
+int board_eth_init(struct bd_info *bis)
 {
 	/* set Ethernet MAC address environment */
 	cl_som_imx7_handle_mac_address("ethaddr", CONFIG_SYS_I2C_EEPROM_BUS);

board/compulab/cl-som-imx7/spl.c

@@ -23,7 +23,7 @@
 static struct fsl_esdhc_cfg cl_som_imx7_spl_usdhc_cfg = {
 	USDHC1_BASE_ADDR, 0, 4};
 
-int board_mmc_init(bd_t *bis)
+int board_mmc_init(struct bd_info *bis)
 {
 	cl_som_imx7_usdhc1_pads_set();
 	cl_som_imx7_spl_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);

board/compulab/cm_fx6/cm_fx6.c

@@ -458,7 +458,7 @@ static int handle_mac_address(char *env_var, uint eeprom_bus)
 
 #define SB_FX6_I2C_EEPROM_BUS	0
 #define NO_MAC_ADDR		"No MAC address found for %s\n"
-int board_eth_init(bd_t *bis)
+int board_eth_init(struct bd_info *bis)
 {
 	int err;
 
@@ -537,7 +537,7 @@ static const struct node_info nodes[] = {
 	{ "jedec,spi-nor",	MTD_DEV_TYPE_NOR,	},
 };
 
-int ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, struct bd_info *bd)
 {
 	u32 baseboard_rev;
 	int nodeoffset;

board/compulab/cm_fx6/spl.c

@@ -356,7 +356,7 @@ static struct fsl_esdhc_cfg usdhc_cfg = {
 	.max_bus_width = 4,
 };
 
-int board_mmc_init(bd_t *bis)
+int board_mmc_init(struct bd_info *bis)
 {
 	cm_fx6_set_usdhc_iomux();
 

board/compulab/cm_t335/cm_t335.c

@@ -128,7 +128,7 @@ static int handle_mac_address(void)
 #define AR8051_DEBUG_RGMII_CLK_DLY_REG	0x5
 #define AR8051_RGMII_TX_CLK_DLY		0x100
 
-int board_eth_init(bd_t *bis)
+int board_eth_init(struct bd_info *bis)
 {
 	int rv, n = 0;
 	const char *devname;

board/compulab/cm_t43/cm_t43.c

@@ -149,7 +149,7 @@ static void board_phy_init(void)
 	mdelay(2);
 }
 
-int board_eth_init(bd_t *bis)
+int board_eth_init(struct bd_info *bis)
 {
 	int rv;