mirror of
https://xff.cz/git/u-boot/
synced 2025-10-31 02:15:45 +01:00
powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support
These boards are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Dave Liu <daveliu@freescale.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
This commit is contained in:
Masahiro Yamada
committed by
Tom Rini
Tom Rini
parent
3b95288a2a
commit
8d1e3cb140
@@ -41,12 +41,6 @@ config TARGET_MPC8349EMDS
|
||||
config TARGET_MPC8349ITX
|
||||
bool "Support MPC8349ITX"
|
||||
|
||||
config TARGET_MPC8360EMDS
|
||||
bool "Support MPC8360EMDS"
|
||||
|
||||
config TARGET_MPC8360ERDK
|
||||
bool "Support MPC8360ERDK"
|
||||
|
||||
config TARGET_MPC837XEMDS
|
||||
bool "Support MPC837XEMDS"
|
||||
|
||||
@@ -81,8 +75,6 @@ source "board/freescale/mpc8323erdb/Kconfig"
|
||||
source "board/freescale/mpc832xemds/Kconfig"
|
||||
source "board/freescale/mpc8349emds/Kconfig"
|
||||
source "board/freescale/mpc8349itx/Kconfig"
|
||||
source "board/freescale/mpc8360emds/Kconfig"
|
||||
source "board/freescale/mpc8360erdk/Kconfig"
|
||||
source "board/freescale/mpc837xemds/Kconfig"
|
||||
source "board/freescale/mpc837xerdb/Kconfig"
|
||||
source "board/ids/ids8313/Kconfig"
|
||||
|
||||
@@ -63,7 +63,7 @@ int pib_init(void)
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_PQ_MDS_PIB_ATM)
|
||||
#if defined(CONFIG_MPC8360EMDS) || defined(CONFIG_MPC8569MDS)
|
||||
#if defined(CONFIG_MPC8569MDS)
|
||||
val8 = 0;
|
||||
i2c_write(0x20, 0x6, 1, &val8, 1);
|
||||
i2c_write(0x20, 0x7, 1, &val8, 1);
|
||||
|
||||
@@ -1,12 +0,0 @@
|
||||
if TARGET_MPC8360EMDS
|
||||
|
||||
config SYS_BOARD
|
||||
default "mpc8360emds"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "freescale"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "MPC8360EMDS"
|
||||
|
||||
endif
|
||||
@@ -1,15 +0,0 @@
|
||||
MPC8360EMDS BOARD
|
||||
M: Dave Liu <daveliu@freescale.com>
|
||||
S: Maintained
|
||||
F: board/freescale/mpc8360emds/
|
||||
F: include/configs/MPC8360EMDS.h
|
||||
F: configs/MPC8360EMDS_33_defconfig
|
||||
F: configs/MPC8360EMDS_33_ATM_defconfig
|
||||
F: configs/MPC8360EMDS_33_HOST_33_defconfig
|
||||
F: configs/MPC8360EMDS_33_HOST_66_defconfig
|
||||
F: configs/MPC8360EMDS_33_SLAVE_defconfig
|
||||
F: configs/MPC8360EMDS_66_defconfig
|
||||
F: configs/MPC8360EMDS_66_ATM_defconfig
|
||||
F: configs/MPC8360EMDS_66_HOST_33_defconfig
|
||||
F: configs/MPC8360EMDS_66_HOST_66_defconfig
|
||||
F: configs/MPC8360EMDS_66_SLAVE_defconfig
|
||||
@@ -1,9 +0,0 @@
|
||||
#
|
||||
# (C) Copyright 2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y += mpc8360emds.o
|
||||
obj-$(CONFIG_PCI) += pci.o
|
||||
@@ -1,155 +0,0 @@
|
||||
Freescale MPC8360EMDS Board
|
||||
-----------------------------------------
|
||||
1. Board Switches and Jumpers
|
||||
1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
|
||||
For some reason, the HW designers describe the switch settings
|
||||
in terms of 0 and 1, and then map that to physical switches where
|
||||
the label "On" refers to logic 0 and "Off" is logic 1.
|
||||
|
||||
Switch bits are numbered 1 through, like, 4 6 8 or 10, but the
|
||||
bits may contribute to signals that are numbered based at 0,
|
||||
and some of those signals may be high-bit-number-0 too. Heed
|
||||
well the names and labels and do not get confused.
|
||||
|
||||
"Off" == 1
|
||||
"On" == 0
|
||||
|
||||
SW18 is switch 18 as silk-screened onto the board.
|
||||
SW4[8] is the bit labeled 8 on Switch 4.
|
||||
SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
|
||||
SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3.
|
||||
SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
|
||||
and bits labeled 8 is set as "Off".
|
||||
|
||||
1.1 There are three type boards for MPC8360E silicon up to now, They are
|
||||
|
||||
* MPC8360E-MDS-PB PROTO (a.k.a 8360SYS PROTOTYPE)
|
||||
* MPC8360E-MDS-PB PILOT (a.k.a 8360SYS PILOT)
|
||||
* MPC8360EA-MDS-PB PROTO (a.k.a 8360SYS2 PROTOTYPE)
|
||||
|
||||
1.2 For all the MPC8360EMDS Board
|
||||
|
||||
First, make sure the board default setting is consistent with the
|
||||
document shipped with your board. Then apply the following setting:
|
||||
SW3[1-8]= 0000_0100 (HRCW setting value is performed on local bus)
|
||||
SW4[1-8]= 0011_0000 (Flash boot on local bus)
|
||||
SW9[1-8]= 0110_0110 (PCI Mode enabled. HRCW is read from FLASH)
|
||||
SW10[1-8]= 0000_1000 (core PLL setting)
|
||||
SW11[1-8]= 0000_0100 (SW11 is on the another side of the board)
|
||||
JP6 1-2
|
||||
on board Oscillator: 66M
|
||||
|
||||
1.3 Since different board/chip rev. combinations have AC timing issues,
|
||||
u-boot forces RGMII-ID (RGMII with Internal Delay) mode on by default
|
||||
by the patch (mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers).
|
||||
|
||||
When the rev2.x silicon mount on these boards, and if you are using
|
||||
u-boot version after this patch, to make the ethernet interfaces usable,
|
||||
and to enable RGMII-ID on your board, you have to setup the jumpers
|
||||
correctly.
|
||||
|
||||
* MPC8360E-MDS-PB PROTO
|
||||
nothing to do
|
||||
* MPC8360E-MDS-PB PILOT
|
||||
JP9 and JP8 should be ON
|
||||
* MPC8360EA-MDS-PB PROTO
|
||||
JP2 and JP3 should be ON
|
||||
|
||||
2. Memory Map
|
||||
|
||||
2.1. The memory map should look pretty much like this:
|
||||
|
||||
0x0000_0000 0x7fff_ffff DDR 2G
|
||||
0x8000_0000 0x8fff_ffff PCI MEM prefetch 256M
|
||||
0x9000_0000 0x9fff_ffff PCI MEM non-prefetch 256M
|
||||
0xc000_0000 0xdfff_ffff Empty 512M
|
||||
0xe000_0000 0xe01f_ffff Int Mem Reg Space 2M
|
||||
0xe020_0000 0xe02f_ffff Empty 1M
|
||||
0xe030_0000 0xe03f_ffff PCI IO 1M
|
||||
0xe040_0000 0xefff_ffff Empty 252M
|
||||
0xf000_0000 0xf3ff_ffff Local Bus SDRAM 64M
|
||||
0xf400_0000 0xf7ff_ffff Empty 64M
|
||||
0xf800_0000 0xf800_7fff BCSR on CS1 32K
|
||||
0xf800_8000 0xf800_ffff PIB CS4 32K
|
||||
0xf801_0000 0xf801_7fff PIB CS5 32K
|
||||
0xfe00_0000 0xfeff_ffff FLASH on CS0 16M
|
||||
|
||||
|
||||
3. Definitions
|
||||
|
||||
3.1 Explanation of NEW definitions in:
|
||||
|
||||
include/configs/MPC8360EMDS.h
|
||||
|
||||
CONFIG_MPC83xx MPC83xx family for both MPC8349 and MPC8360
|
||||
CONFIG_MPC8360 MPC8360 specific
|
||||
CONFIG_MPC8360EMDS MPC8360EMDS board specific
|
||||
|
||||
4. Compilation
|
||||
|
||||
MPC8360EMDS shipped with 33.33MHz or 66MHz oscillator(check U41 chip).
|
||||
|
||||
Assuming you're using BASH shell:
|
||||
|
||||
export CROSS_COMPILE=your-cross-compile-prefix
|
||||
cd u-boot
|
||||
make distclean
|
||||
make MPC8360EMDS_XX_config
|
||||
make
|
||||
|
||||
MPC8360EMDS support ATM, PCI in host and slave mode.
|
||||
|
||||
To make u-boot support ATM :
|
||||
1) Make MPC8360EMDS_XX_ATM_config
|
||||
|
||||
To make u-boot support PCI host 66M :
|
||||
1) DIP SW support PCI mode as described in Section 1.1.
|
||||
2) Make MPC8360EMDS_XX_HOST_66_config
|
||||
|
||||
To make u-boot support PCI host 33M :
|
||||
1) DIP SW setting is similar as Section 1.1, except for SW3[4] is 1
|
||||
2) Make MPC8360EMDS_XX_HOST_33_config
|
||||
|
||||
To make u-boot support PCI slave 66M :
|
||||
1) DIP SW setting is similar as Section 1.1, except for SW9[3] is 1
|
||||
2) Make MPC8360EMDS_XX_SLAVE_config
|
||||
|
||||
(where XX is:
|
||||
33 - 33.33MHz oscillator
|
||||
66 - 66MHz oscillator)
|
||||
|
||||
5. Downloading and Flashing Images
|
||||
|
||||
5.0 Download over serial line using Kermit:
|
||||
|
||||
loadb
|
||||
[Drop to kermit:
|
||||
^\c
|
||||
send <u-boot-bin-image>
|
||||
c
|
||||
]
|
||||
|
||||
|
||||
Or via tftp:
|
||||
|
||||
tftp 10000 u-boot.bin
|
||||
|
||||
5.1 Reflash U-boot Image using U-boot
|
||||
|
||||
tftp 20000 u-boot.bin
|
||||
protect off fef00000 fef3ffff
|
||||
erase fef00000 fef3ffff
|
||||
|
||||
cp.b 20000 fef00000 xxxx
|
||||
|
||||
or
|
||||
|
||||
cp.b 20000 fef00000 3ffff
|
||||
|
||||
|
||||
You have to supply the correct byte count with 'xxxx' from the TFTP result log.
|
||||
Maybe 3ffff will work too, that corresponds to the erased sectors.
|
||||
|
||||
|
||||
6. Notes
|
||||
1) The console baudrate for MPC8360EMDS is 115200bps.
|
||||
@@ -1,453 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2006,2010-2011 Freescale Semiconductor, Inc.
|
||||
* Dave Liu <daveliu@freescale.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <ioports.h>
|
||||
#include <mpc83xx.h>
|
||||
#include <i2c.h>
|
||||
#include <miiphy.h>
|
||||
#include <phy.h>
|
||||
#include <fsl_mdio.h>
|
||||
#if defined(CONFIG_PCI)
|
||||
#include <pci.h>
|
||||
#endif
|
||||
#include <spd_sdram.h>
|
||||
#include <asm/mmu.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/mmu.h>
|
||||
#if defined(CONFIG_OF_LIBFDT)
|
||||
#include <libfdt.h>
|
||||
#endif
|
||||
#include <hwconfig.h>
|
||||
#include <fdt_support.h>
|
||||
#if defined(CONFIG_PQ_MDS_PIB)
|
||||
#include "../common/pq-mds-pib.h"
|
||||
#endif
|
||||
#include "../../../drivers/qe/uec.h"
|
||||
|
||||
const qe_iop_conf_t qe_iop_conf_tab[] = {
|
||||
/* GETH1 */
|
||||
{0, 3, 1, 0, 1}, /* TxD0 */
|
||||
{0, 4, 1, 0, 1}, /* TxD1 */
|
||||
{0, 5, 1, 0, 1}, /* TxD2 */
|
||||
{0, 6, 1, 0, 1}, /* TxD3 */
|
||||
{1, 6, 1, 0, 3}, /* TxD4 */
|
||||
{1, 7, 1, 0, 1}, /* TxD5 */
|
||||
{1, 9, 1, 0, 2}, /* TxD6 */
|
||||
{1, 10, 1, 0, 2}, /* TxD7 */
|
||||
{0, 9, 2, 0, 1}, /* RxD0 */
|
||||
{0, 10, 2, 0, 1}, /* RxD1 */
|
||||
{0, 11, 2, 0, 1}, /* RxD2 */
|
||||
{0, 12, 2, 0, 1}, /* RxD3 */
|
||||
{0, 13, 2, 0, 1}, /* RxD4 */
|
||||
{1, 1, 2, 0, 2}, /* RxD5 */
|
||||
{1, 0, 2, 0, 2}, /* RxD6 */
|
||||
{1, 4, 2, 0, 2}, /* RxD7 */
|
||||
{0, 7, 1, 0, 1}, /* TX_EN */
|
||||
{0, 8, 1, 0, 1}, /* TX_ER */
|
||||
{0, 15, 2, 0, 1}, /* RX_DV */
|
||||
{0, 16, 2, 0, 1}, /* RX_ER */
|
||||
{0, 0, 2, 0, 1}, /* RX_CLK */
|
||||
{2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */
|
||||
{2, 8, 2, 0, 1}, /* GTX125 - CLK9 */
|
||||
/* GETH2 */
|
||||
{0, 17, 1, 0, 1}, /* TxD0 */
|
||||
{0, 18, 1, 0, 1}, /* TxD1 */
|
||||
{0, 19, 1, 0, 1}, /* TxD2 */
|
||||
{0, 20, 1, 0, 1}, /* TxD3 */
|
||||
{1, 2, 1, 0, 1}, /* TxD4 */
|
||||
{1, 3, 1, 0, 2}, /* TxD5 */
|
||||
{1, 5, 1, 0, 3}, /* TxD6 */
|
||||
{1, 8, 1, 0, 3}, /* TxD7 */
|
||||
{0, 23, 2, 0, 1}, /* RxD0 */
|
||||
{0, 24, 2, 0, 1}, /* RxD1 */
|
||||
{0, 25, 2, 0, 1}, /* RxD2 */
|
||||
{0, 26, 2, 0, 1}, /* RxD3 */
|
||||
{0, 27, 2, 0, 1}, /* RxD4 */
|
||||
{1, 12, 2, 0, 2}, /* RxD5 */
|
||||
{1, 13, 2, 0, 3}, /* RxD6 */
|
||||
{1, 11, 2, 0, 2}, /* RxD7 */
|
||||
{0, 21, 1, 0, 1}, /* TX_EN */
|
||||
{0, 22, 1, 0, 1}, /* TX_ER */
|
||||
{0, 29, 2, 0, 1}, /* RX_DV */
|
||||
{0, 30, 2, 0, 1}, /* RX_ER */
|
||||
{0, 31, 2, 0, 1}, /* RX_CLK */
|
||||
{2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */
|
||||
{2, 3, 2, 0, 1}, /* GTX125 - CLK4 */
|
||||
|
||||
{0, 1, 3, 0, 2}, /* MDIO */
|
||||
{0, 2, 1, 0, 1}, /* MDC */
|
||||
|
||||
{5, 0, 1, 0, 2}, /* UART2_SOUT */
|
||||
{5, 1, 2, 0, 3}, /* UART2_CTS */
|
||||
{5, 2, 1, 0, 1}, /* UART2_RTS */
|
||||
{5, 3, 2, 0, 2}, /* UART2_SIN */
|
||||
|
||||
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
|
||||
};
|
||||
|
||||
/* Handle "mpc8360ea rev.2.1 erratum 2: RGMII Timing"? */
|
||||
static int board_handle_erratum2(void)
|
||||
{
|
||||
const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
|
||||
|
||||
return REVID_MAJOR(immr->sysconf.spridr) == 2 &&
|
||||
REVID_MINOR(immr->sysconf.spridr) == 1;
|
||||
}
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
|
||||
u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
|
||||
|
||||
/* Enable flash write */
|
||||
bcsr[0xa] &= ~0x04;
|
||||
|
||||
/* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2.x h/w bug workaround) */
|
||||
if (REVID_MAJOR(immr->sysconf.spridr) == 2)
|
||||
bcsr[0xe] = 0x30;
|
||||
|
||||
/* Enable second UART */
|
||||
bcsr[0x9] &= ~0x01;
|
||||
|
||||
if (board_handle_erratum2()) {
|
||||
void *immap = (immap_t *)(CONFIG_SYS_IMMR + 0x14a8);
|
||||
|
||||
/*
|
||||
* IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
|
||||
* IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
|
||||
*/
|
||||
setbits_be32(immap, 0x0c003000);
|
||||
|
||||
/*
|
||||
* IMMR + 0x14AC[20:27] = 10101010
|
||||
* (data delay for both UCC's)
|
||||
*/
|
||||
clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_early_init_r(void)
|
||||
{
|
||||
gd_t *gd;
|
||||
#ifdef CONFIG_PQ_MDS_PIB
|
||||
pib_init();
|
||||
#endif
|
||||
/*
|
||||
* BAT6 is used for SDRAM when DDR size is 512MB or larger than 256MB
|
||||
* So re-setup PCI MEM space used BAT5 after relocated to DDR
|
||||
*/
|
||||
gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
|
||||
if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
|
||||
write_bat(DBAT5, CONFIG_SYS_DBAT6U, CONFIG_SYS_DBAT6L);
|
||||
write_bat(IBAT5, CONFIG_SYS_IBAT6U, CONFIG_SYS_IBAT6L);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_UEC_ETH
|
||||
static uec_info_t uec_info[] = {
|
||||
#ifdef CONFIG_UEC_ETH1
|
||||
STD_UEC_INFO(1),
|
||||
#endif
|
||||
#ifdef CONFIG_UEC_ETH2
|
||||
STD_UEC_INFO(2),
|
||||
#endif
|
||||
};
|
||||
|
||||
int board_eth_init(bd_t *bd)
|
||||
{
|
||||
if (board_handle_erratum2()) {
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(uec_info); i++) {
|
||||
uec_info[i].enet_interface_type =
|
||||
PHY_INTERFACE_MODE_RGMII_RXID;
|
||||
uec_info[i].speed = SPEED_1000;
|
||||
}
|
||||
}
|
||||
return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info));
|
||||
}
|
||||
#endif /* CONFIG_UEC_ETH */
|
||||
|
||||
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
||||
extern void ddr_enable_ecc(unsigned int dram_size);
|
||||
#endif
|
||||
int fixed_sdram(void);
|
||||
static int sdram_init(unsigned int base);
|
||||
|
||||
phys_size_t initdram(int board_type)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
||||
u32 msize = 0;
|
||||
u32 lbc_sdram_size;
|
||||
|
||||
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
|
||||
return -1;
|
||||
|
||||
/* DDR SDRAM - Main SODIMM */
|
||||
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
|
||||
#if defined(CONFIG_SPD_EEPROM)
|
||||
msize = spd_sdram();
|
||||
#else
|
||||
msize = fixed_sdram();
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
||||
/*
|
||||
* Initialize DDR ECC byte
|
||||
*/
|
||||
ddr_enable_ecc(msize * 1024 * 1024);
|
||||
#endif
|
||||
/*
|
||||
* Initialize SDRAM if it is on local bus.
|
||||
*/
|
||||
lbc_sdram_size = sdram_init(msize * 1024 * 1024);
|
||||
if (!msize)
|
||||
msize = lbc_sdram_size;
|
||||
|
||||
/* return total bus SDRAM size(bytes) -- DDR */
|
||||
return (msize * 1024 * 1024);
|
||||
}
|
||||
|
||||
#if !defined(CONFIG_SPD_EEPROM)
|
||||
/*************************************************************************
|
||||
* fixed sdram init -- doesn't use serial presence detect.
|
||||
************************************************************************/
|
||||
int fixed_sdram(void)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
||||
u32 msize = CONFIG_SYS_DDR_SIZE;
|
||||
u32 ddr_size = msize << 20;
|
||||
u32 ddr_size_log2 = __ilog2(ddr_size);
|
||||
u32 half_ddr_size = ddr_size >> 1;
|
||||
|
||||
im->sysconf.ddrlaw[0].bar =
|
||||
CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
|
||||
im->sysconf.ddrlaw[0].ar =
|
||||
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
|
||||
#if (CONFIG_SYS_DDR_SIZE != 256)
|
||||
#warning Currenly any ddr size other than 256 is not supported
|
||||
#endif
|
||||
#ifdef CONFIG_DDR_II
|
||||
im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
|
||||
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
|
||||
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
|
||||
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
||||
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
||||
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
|
||||
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
|
||||
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
|
||||
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
|
||||
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
|
||||
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
||||
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
|
||||
#else
|
||||
|
||||
#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0)
|
||||
#warning Chip select bounds is only configurable in 16MB increments
|
||||
#endif
|
||||
im->ddr.csbnds[0].csbnds =
|
||||
((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
|
||||
(((CONFIG_SYS_DDR_SDRAM_BASE + half_ddr_size - 1) >>
|
||||
CSBNDS_EA_SHIFT) & CSBNDS_EA);
|
||||
im->ddr.csbnds[1].csbnds =
|
||||
(((CONFIG_SYS_DDR_SDRAM_BASE + half_ddr_size) >>
|
||||
CSBNDS_SA_SHIFT) & CSBNDS_SA) |
|
||||
(((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >>
|
||||
CSBNDS_EA_SHIFT) & CSBNDS_EA);
|
||||
|
||||
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
|
||||
im->ddr.cs_config[1] = CONFIG_SYS_DDR_CS1_CONFIG;
|
||||
|
||||
im->ddr.cs_config[2] = 0;
|
||||
im->ddr.cs_config[3] = 0;
|
||||
|
||||
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
||||
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
||||
im->ddr.sdram_cfg = CONFIG_SYS_DDR_CONTROL;
|
||||
|
||||
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
|
||||
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
||||
#endif
|
||||
udelay(200);
|
||||
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
|
||||
|
||||
return msize;
|
||||
}
|
||||
#endif /*!CONFIG_SYS_SPD_EEPROM */
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
puts("Board: Freescale MPC8360EMDS\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* if MPC8360EMDS is soldered with SDRAM
|
||||
*/
|
||||
#ifdef CONFIG_SYS_LB_SDRAM
|
||||
/*
|
||||
* Initialize SDRAM memory on the Local Bus.
|
||||
*/
|
||||
|
||||
static int sdram_init(unsigned int base)
|
||||
{
|
||||
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
||||
fsl_lbc_t *lbc = LBC_BASE_ADDR;
|
||||
const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024;
|
||||
int rem = base % sdram_size;
|
||||
uint *sdram_addr;
|
||||
|
||||
/* window base address should be aligned to the window size */
|
||||
if (rem)
|
||||
base = base - rem + sdram_size;
|
||||
|
||||
/*
|
||||
* Setup BAT6 for SDRAM when DDR size is 512MB or larger than 256MB
|
||||
* After relocated to DDR, reuse BAT5 for PCI MEM space
|
||||
*/
|
||||
if (base > CONFIG_MAX_MEM_MAPPED) {
|
||||
unsigned long batl = base | BATL_PP_10 | BATL_MEMCOHERENCE;
|
||||
unsigned long batu = base | BATU_BL_64M | BATU_VS | BATU_VP;
|
||||
|
||||
/* Setup the BAT6 for SDRAM */
|
||||
write_bat(DBAT6, batu, batl);
|
||||
write_bat(IBAT6, batu, batl);
|
||||
}
|
||||
|
||||
sdram_addr = (uint *)base;
|
||||
/*
|
||||
* Setup SDRAM Base and Option Registers
|
||||
*/
|
||||
set_lbc_br(2, base | CONFIG_SYS_BR2);
|
||||
set_lbc_or(2, CONFIG_SYS_OR2);
|
||||
immap->sysconf.lblaw[2].bar = base;
|
||||
immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2;
|
||||
|
||||
/*setup mtrpt, lsrt and lbcr for LB bus */
|
||||
lbc->lbcr = CONFIG_SYS_LBC_LBCR;
|
||||
lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
|
||||
lbc->lsrt = CONFIG_SYS_LBC_LSRT;
|
||||
asm("sync");
|
||||
|
||||
/*
|
||||
* Configure the SDRAM controller Machine Mode Register.
|
||||
*/
|
||||
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* Normal Operation */
|
||||
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* Precharge All Banks */
|
||||
asm("sync");
|
||||
*sdram_addr = 0xff;
|
||||
udelay(100);
|
||||
|
||||
/*
|
||||
* We need do 8 times auto refresh operation.
|
||||
*/
|
||||
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
|
||||
asm("sync");
|
||||
*sdram_addr = 0xff; /* 1 times */
|
||||
udelay(100);
|
||||
*sdram_addr = 0xff; /* 2 times */
|
||||
udelay(100);
|
||||
*sdram_addr = 0xff; /* 3 times */
|
||||
udelay(100);
|
||||
*sdram_addr = 0xff; /* 4 times */
|
||||
udelay(100);
|
||||
*sdram_addr = 0xff; /* 5 times */
|
||||
udelay(100);
|
||||
*sdram_addr = 0xff; /* 6 times */
|
||||
udelay(100);
|
||||
*sdram_addr = 0xff; /* 7 times */
|
||||
udelay(100);
|
||||
*sdram_addr = 0xff; /* 8 times */
|
||||
udelay(100);
|
||||
|
||||
/* Mode register write operation */
|
||||
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
|
||||
asm("sync");
|
||||
*(sdram_addr + 0xcc) = 0xff;
|
||||
udelay(100);
|
||||
|
||||
/* Normal operation */
|
||||
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5 | 0x40000000;
|
||||
asm("sync");
|
||||
*sdram_addr = 0xff;
|
||||
udelay(100);
|
||||
|
||||
/*
|
||||
* In non-aligned case we don't [normally] use that memory because
|
||||
* there is a hole.
|
||||
*/
|
||||
if (rem)
|
||||
return 0;
|
||||
return CONFIG_SYS_LBC_SDRAM_SIZE;
|
||||
}
|
||||
#else
|
||||
static int sdram_init(unsigned int base) { return 0; }
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_OF_BOARD_SETUP)
|
||||
static void ft_board_fixup_qe_usb(void *blob, bd_t *bd)
|
||||
{
|
||||
if (!hwconfig_subarg_cmp("qe_usb", "mode", "peripheral"))
|
||||
return;
|
||||
|
||||
do_fixup_by_compat(blob, "fsl,mpc8323-qe-usb", "mode",
|
||||
"peripheral", sizeof("peripheral"), 1);
|
||||
}
|
||||
|
||||
int ft_board_setup(void *blob, bd_t *bd)
|
||||
{
|
||||
ft_cpu_setup(blob, bd);
|
||||
#ifdef CONFIG_PCI
|
||||
ft_pci_setup(blob, bd);
|
||||
#endif
|
||||
ft_board_fixup_qe_usb(blob, bd);
|
||||
/*
|
||||
* mpc8360ea pb mds errata 2: RGMII timing
|
||||
* if on mpc8360ea rev. 2.1,
|
||||
* change both ucc phy-connection-types from rgmii-id to rgmii-rxid
|
||||
*/
|
||||
if (board_handle_erratum2()) {
|
||||
int nodeoffset;
|
||||
const char *prop;
|
||||
int path;
|
||||
|
||||
nodeoffset = fdt_path_offset(blob, "/aliases");
|
||||
if (nodeoffset >= 0) {
|
||||
#if defined(CONFIG_HAS_ETH0)
|
||||
/* fixup UCC 1 if using rgmii-id mode */
|
||||
prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
|
||||
if (prop) {
|
||||
path = fdt_path_offset(blob, prop);
|
||||
prop = fdt_getprop(blob, path,
|
||||
"phy-connection-type", 0);
|
||||
if (prop && (strcmp(prop, "rgmii-id") == 0))
|
||||
fdt_fixup_phy_connection(blob, path,
|
||||
PHY_INTERFACE_MODE_RGMII_RXID);
|
||||
}
|
||||
#endif
|
||||
#if defined(CONFIG_HAS_ETH1)
|
||||
/* fixup UCC 2 if using rgmii-id mode */
|
||||
prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
|
||||
if (prop) {
|
||||
path = fdt_path_offset(blob, prop);
|
||||
prop = fdt_getprop(blob, path,
|
||||
"phy-connection-type", 0);
|
||||
if (prop && (strcmp(prop, "rgmii-id") == 0))
|
||||
fdt_fixup_phy_connection(blob, path,
|
||||
PHY_INTERFACE_MODE_RGMII_RXID);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
@@ -1,147 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/*
|
||||
* PCI Configuration space access support for MPC83xx PCI Bridge
|
||||
*/
|
||||
|
||||
#include <asm/mmu.h>
|
||||
#include <asm/io.h>
|
||||
#include <common.h>
|
||||
#include <mpc83xx.h>
|
||||
#include <pci.h>
|
||||
#include <i2c.h>
|
||||
#include <asm/fsl_i2c.h>
|
||||
#include "../common/pq-mds-pib.h"
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
static struct pci_region pci1_regions[] = {
|
||||
{
|
||||
bus_start: CONFIG_SYS_PCI1_MEM_BASE,
|
||||
phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
|
||||
size: CONFIG_SYS_PCI1_MEM_SIZE,
|
||||
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
|
||||
},
|
||||
{
|
||||
bus_start: CONFIG_SYS_PCI1_IO_BASE,
|
||||
phys_start: CONFIG_SYS_PCI1_IO_PHYS,
|
||||
size: CONFIG_SYS_PCI1_IO_SIZE,
|
||||
flags: PCI_REGION_IO
|
||||
},
|
||||
{
|
||||
bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
|
||||
phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
|
||||
size: CONFIG_SYS_PCI1_MMIO_SIZE,
|
||||
flags: PCI_REGION_MEM
|
||||
},
|
||||
};
|
||||
|
||||
#ifdef CONFIG_MPC83XX_PCI2
|
||||
static struct pci_region pci2_regions[] = {
|
||||
{
|
||||
bus_start: CONFIG_SYS_PCI2_MEM_BASE,
|
||||
phys_start: CONFIG_SYS_PCI2_MEM_PHYS,
|
||||
size: CONFIG_SYS_PCI2_MEM_SIZE,
|
||||
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
|
||||
},
|
||||
{
|
||||
bus_start: CONFIG_SYS_PCI2_IO_BASE,
|
||||
phys_start: CONFIG_SYS_PCI2_IO_PHYS,
|
||||
size: CONFIG_SYS_PCI2_IO_SIZE,
|
||||
flags: PCI_REGION_IO
|
||||
},
|
||||
{
|
||||
bus_start: CONFIG_SYS_PCI2_MMIO_BASE,
|
||||
phys_start: CONFIG_SYS_PCI2_MMIO_PHYS,
|
||||
size: CONFIG_SYS_PCI2_MMIO_SIZE,
|
||||
flags: PCI_REGION_MEM
|
||||
},
|
||||
};
|
||||
#endif
|
||||
|
||||
void pci_init_board(void)
|
||||
#ifdef CONFIG_PCISLAVE
|
||||
{
|
||||
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
|
||||
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
|
||||
volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[0];
|
||||
struct pci_region *reg[] = { pci1_regions };
|
||||
|
||||
/* Configure PCI Local Access Windows */
|
||||
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
|
||||
pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
|
||||
|
||||
pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
|
||||
pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
|
||||
|
||||
mpc83xx_pci_init(1, reg);
|
||||
|
||||
/*
|
||||
* Configure PCI Inbound Translation Windows
|
||||
*/
|
||||
pci_ctrl[0].pitar0 = 0x0;
|
||||
pci_ctrl[0].pibar0 = 0x0;
|
||||
pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP |
|
||||
PIWAR_WTT_SNOOP | PIWAR_IWS_4K;
|
||||
|
||||
pci_ctrl[0].pitar1 = 0x0;
|
||||
pci_ctrl[0].pibar1 = 0x0;
|
||||
pci_ctrl[0].piebar1 = 0x0;
|
||||
pci_ctrl[0].piwar1 &= ~PIWAR_EN;
|
||||
|
||||
pci_ctrl[0].pitar2 = 0x0;
|
||||
pci_ctrl[0].pibar2 = 0x0;
|
||||
pci_ctrl[0].piebar2 = 0x0;
|
||||
pci_ctrl[0].piwar2 &= ~PIWAR_EN;
|
||||
|
||||
/* Unlock the configuration bit */
|
||||
mpc83xx_pcislave_unlock(0);
|
||||
printf("PCI: Agent mode enabled\n");
|
||||
}
|
||||
#else
|
||||
{
|
||||
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
|
||||
volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
|
||||
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
|
||||
#ifndef CONFIG_MPC83XX_PCI2
|
||||
struct pci_region *reg[] = { pci1_regions };
|
||||
#else
|
||||
struct pci_region *reg[] = { pci1_regions, pci2_regions };
|
||||
#endif
|
||||
|
||||
/* initialize the PCA9555PW IO expander on the PIB board */
|
||||
pib_init();
|
||||
|
||||
#if defined(CONFIG_PCI_66M)
|
||||
clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
|
||||
printf("PCI clock is 66MHz\n");
|
||||
#elif defined(CONFIG_PCI_33M)
|
||||
clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
|
||||
OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
|
||||
printf("PCI clock is 33MHz\n");
|
||||
#else
|
||||
clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
|
||||
printf("PCI clock is 66MHz\n");
|
||||
#endif
|
||||
udelay(2000);
|
||||
|
||||
/* Configure PCI Local Access Windows */
|
||||
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
|
||||
pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
|
||||
|
||||
pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
|
||||
pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
|
||||
|
||||
udelay(2000);
|
||||
|
||||
#ifndef CONFIG_MPC83XX_PCI2
|
||||
mpc83xx_pci_init(1, reg);
|
||||
#else
|
||||
mpc83xx_pci_init(2, reg);
|
||||
#endif
|
||||
}
|
||||
#endif /* CONFIG_PCISLAVE */
|
||||
@@ -1,12 +0,0 @@
|
||||
if TARGET_MPC8360ERDK
|
||||
|
||||
config SYS_BOARD
|
||||
default "mpc8360erdk"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "freescale"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "MPC8360ERDK"
|
||||
|
||||
endif
|
||||
@@ -1,7 +0,0 @@
|
||||
MPC8360ERDK BOARD
|
||||
#M: Anton Vorontsov <avorontsov@ru.mvista.com>
|
||||
S: Orphan (since 2014-03)
|
||||
F: board/freescale/mpc8360erdk/
|
||||
F: include/configs/MPC8360ERDK.h
|
||||
F: configs/MPC8360ERDK_defconfig
|
||||
F: configs/MPC8360ERDK_33_defconfig
|
||||
@@ -1,9 +0,0 @@
|
||||
#
|
||||
# (C) Copyright 2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y += mpc8360erdk.o
|
||||
obj-$(CONFIG_CMD_NAND) += nand.o
|
||||
@@ -1,350 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2006 Freescale Semiconductor, Inc.
|
||||
* Dave Liu <daveliu@freescale.com>
|
||||
*
|
||||
* Copyright (C) 2007 Logic Product Development, Inc.
|
||||
* Peter Barada <peterb@logicpd.com>
|
||||
*
|
||||
* Copyright (C) 2007 MontaVista Software, Inc.
|
||||
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <ioports.h>
|
||||
#include <mpc83xx.h>
|
||||
#include <i2c.h>
|
||||
#include <miiphy.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/mmu.h>
|
||||
#include <pci.h>
|
||||
#include <libfdt.h>
|
||||
|
||||
const qe_iop_conf_t qe_iop_conf_tab[] = {
|
||||
/* MDIO */
|
||||
{0, 1, 3, 0, 2}, /* MDIO */
|
||||
{0, 2, 1, 0, 1}, /* MDC */
|
||||
|
||||
/* UCC1 - UEC (Gigabit) */
|
||||
{0, 3, 1, 0, 1}, /* TxD0 */
|
||||
{0, 4, 1, 0, 1}, /* TxD1 */
|
||||
{0, 5, 1, 0, 1}, /* TxD2 */
|
||||
{0, 6, 1, 0, 1}, /* TxD3 */
|
||||
{0, 9, 2, 0, 1}, /* RxD0 */
|
||||
{0, 10, 2, 0, 1}, /* RxD1 */
|
||||
{0, 11, 2, 0, 1}, /* RxD2 */
|
||||
{0, 12, 2, 0, 1}, /* RxD3 */
|
||||
{0, 7, 1, 0, 1}, /* TX_EN */
|
||||
{0, 8, 1, 0, 1}, /* TX_ER */
|
||||
{0, 15, 2, 0, 1}, /* RX_DV */
|
||||
{0, 0, 2, 0, 1}, /* RX_CLK */
|
||||
{2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */
|
||||
{2, 8, 2, 0, 1}, /* GTX125 - CLK9 */
|
||||
|
||||
/* UCC2 - UEC (Gigabit) */
|
||||
{0, 17, 1, 0, 1}, /* TxD0 */
|
||||
{0, 18, 1, 0, 1}, /* TxD1 */
|
||||
{0, 19, 1, 0, 1}, /* TxD2 */
|
||||
{0, 20, 1, 0, 1}, /* TxD3 */
|
||||
{0, 23, 2, 0, 1}, /* RxD0 */
|
||||
{0, 24, 2, 0, 1}, /* RxD1 */
|
||||
{0, 25, 2, 0, 1}, /* RxD2 */
|
||||
{0, 26, 2, 0, 1}, /* RxD3 */
|
||||
{0, 21, 1, 0, 1}, /* TX_EN */
|
||||
{0, 22, 1, 0, 1}, /* TX_ER */
|
||||
{0, 29, 2, 0, 1}, /* RX_DV */
|
||||
{0, 31, 2, 0, 1}, /* RX_CLK */
|
||||
{2, 2, 1, 0, 2}, /* GTX_CLK - CLK10 */
|
||||
{2, 3, 2, 0, 1}, /* GTX125 - CLK4 */
|
||||
|
||||
/* UCC7 - UEC */
|
||||
{4, 0, 1, 0, 1}, /* TxD0 */
|
||||
{4, 1, 1, 0, 1}, /* TxD1 */
|
||||
{4, 2, 1, 0, 1}, /* TxD2 */
|
||||
{4, 3, 1, 0, 1}, /* TxD3 */
|
||||
{4, 6, 2, 0, 1}, /* RxD0 */
|
||||
{4, 7, 2, 0, 1}, /* RxD1 */
|
||||
{4, 8, 2, 0, 1}, /* RxD2 */
|
||||
{4, 9, 2, 0, 1}, /* RxD3 */
|
||||
{4, 4, 1, 0, 1}, /* TX_EN */
|
||||
{4, 5, 1, 0, 1}, /* TX_ER */
|
||||
{4, 12, 2, 0, 1}, /* RX_DV */
|
||||
{4, 13, 2, 0, 1}, /* RX_ER */
|
||||
{4, 10, 2, 0, 1}, /* COL */
|
||||
{4, 11, 2, 0, 1}, /* CRS */
|
||||
{2, 18, 2, 0, 1}, /* TX_CLK - CLK19 */
|
||||
{2, 19, 2, 0, 1}, /* RX_CLK - CLK20 */
|
||||
|
||||
/* UCC4 - UEC */
|
||||
{1, 14, 1, 0, 1}, /* TxD0 */
|
||||
{1, 15, 1, 0, 1}, /* TxD1 */
|
||||
{1, 16, 1, 0, 1}, /* TxD2 */
|
||||
{1, 17, 1, 0, 1}, /* TxD3 */
|
||||
{1, 20, 2, 0, 1}, /* RxD0 */
|
||||
{1, 21, 2, 0, 1}, /* RxD1 */
|
||||
{1, 22, 2, 0, 1}, /* RxD2 */
|
||||
{1, 23, 2, 0, 1}, /* RxD3 */
|
||||
{1, 18, 1, 0, 1}, /* TX_EN */
|
||||
{1, 19, 1, 0, 2}, /* TX_ER */
|
||||
{1, 26, 2, 0, 1}, /* RX_DV */
|
||||
{1, 27, 2, 0, 1}, /* RX_ER */
|
||||
{1, 24, 2, 0, 1}, /* COL */
|
||||
{1, 25, 2, 0, 1}, /* CRS */
|
||||
{2, 6, 2, 0, 1}, /* TX_CLK - CLK7 */
|
||||
{2, 7, 2, 0, 1}, /* RX_CLK - CLK8 */
|
||||
|
||||
/* PCI1 */
|
||||
{5, 4, 2, 0, 3}, /* PCI_M66EN */
|
||||
{5, 5, 1, 0, 3}, /* PCI_INTA */
|
||||
{5, 6, 1, 0, 3}, /* PCI_RSTO */
|
||||
{5, 7, 3, 0, 3}, /* PCI_C_BE0 */
|
||||
{5, 8, 3, 0, 3}, /* PCI_C_BE1 */
|
||||
{5, 9, 3, 0, 3}, /* PCI_C_BE2 */
|
||||
{5, 10, 3, 0, 3}, /* PCI_C_BE3 */
|
||||
{5, 11, 3, 0, 3}, /* PCI_PAR */
|
||||
{5, 12, 3, 0, 3}, /* PCI_FRAME */
|
||||
{5, 13, 3, 0, 3}, /* PCI_TRDY */
|
||||
{5, 14, 3, 0, 3}, /* PCI_IRDY */
|
||||
{5, 15, 3, 0, 3}, /* PCI_STOP */
|
||||
{5, 16, 3, 0, 3}, /* PCI_DEVSEL */
|
||||
{5, 17, 0, 0, 0}, /* PCI_IDSEL */
|
||||
{5, 18, 3, 0, 3}, /* PCI_SERR */
|
||||
{5, 19, 3, 0, 3}, /* PCI_PERR */
|
||||
{5, 20, 3, 0, 3}, /* PCI_REQ0 */
|
||||
{5, 21, 2, 0, 3}, /* PCI_REQ1 */
|
||||
{5, 22, 2, 0, 3}, /* PCI_GNT2 */
|
||||
{5, 23, 3, 0, 3}, /* PCI_GNT0 */
|
||||
{5, 24, 1, 0, 3}, /* PCI_GNT1 */
|
||||
{5, 25, 1, 0, 3}, /* PCI_GNT2 */
|
||||
{5, 26, 0, 0, 0}, /* PCI_CLK0 */
|
||||
{5, 27, 0, 0, 0}, /* PCI_CLK1 */
|
||||
{5, 28, 0, 0, 0}, /* PCI_CLK2 */
|
||||
{5, 29, 0, 0, 3}, /* PCI_SYNC_OUT */
|
||||
{6, 0, 3, 0, 3}, /* PCI_AD0 */
|
||||
{6, 1, 3, 0, 3}, /* PCI_AD1 */
|
||||
{6, 2, 3, 0, 3}, /* PCI_AD2 */
|
||||
{6, 3, 3, 0, 3}, /* PCI_AD3 */
|
||||
{6, 4, 3, 0, 3}, /* PCI_AD4 */
|
||||
{6, 5, 3, 0, 3}, /* PCI_AD5 */
|
||||
{6, 6, 3, 0, 3}, /* PCI_AD6 */
|
||||
{6, 7, 3, 0, 3}, /* PCI_AD7 */
|
||||
{6, 8, 3, 0, 3}, /* PCI_AD8 */
|
||||
{6, 9, 3, 0, 3}, /* PCI_AD9 */
|
||||
{6, 10, 3, 0, 3}, /* PCI_AD10 */
|
||||
{6, 11, 3, 0, 3}, /* PCI_AD11 */
|
||||
{6, 12, 3, 0, 3}, /* PCI_AD12 */
|
||||
{6, 13, 3, 0, 3}, /* PCI_AD13 */
|
||||
{6, 14, 3, 0, 3}, /* PCI_AD14 */
|
||||
{6, 15, 3, 0, 3}, /* PCI_AD15 */
|
||||
{6, 16, 3, 0, 3}, /* PCI_AD16 */
|
||||
{6, 17, 3, 0, 3}, /* PCI_AD17 */
|
||||
{6, 18, 3, 0, 3}, /* PCI_AD18 */
|
||||
{6, 19, 3, 0, 3}, /* PCI_AD19 */
|
||||
{6, 20, 3, 0, 3}, /* PCI_AD20 */
|
||||
{6, 21, 3, 0, 3}, /* PCI_AD21 */
|
||||
{6, 22, 3, 0, 3}, /* PCI_AD22 */
|
||||
{6, 23, 3, 0, 3}, /* PCI_AD23 */
|
||||
{6, 24, 3, 0, 3}, /* PCI_AD24 */
|
||||
{6, 25, 3, 0, 3}, /* PCI_AD25 */
|
||||
{6, 26, 3, 0, 3}, /* PCI_AD26 */
|
||||
{6, 27, 3, 0, 3}, /* PCI_AD27 */
|
||||
{6, 28, 3, 0, 3}, /* PCI_AD28 */
|
||||
{6, 29, 3, 0, 3}, /* PCI_AD29 */
|
||||
{6, 30, 3, 0, 3}, /* PCI_AD30 */
|
||||
{6, 31, 3, 0, 3}, /* PCI_AD31 */
|
||||
|
||||
/* NAND */
|
||||
{4, 18, 2, 0, 0}, /* NAND_RYnBY */
|
||||
|
||||
/* DUART - UART2 */
|
||||
{5, 0, 1, 0, 2}, /* UART2_SOUT */
|
||||
{5, 2, 1, 0, 1}, /* UART2_RTS */
|
||||
{5, 3, 2, 0, 2}, /* UART2_SIN */
|
||||
{5, 1, 2, 0, 3}, /* UART2_CTS */
|
||||
|
||||
/* UCC5 - UART3 */
|
||||
{3, 0, 1, 0, 1}, /* UART3_TX */
|
||||
{3, 4, 1, 0, 1}, /* UART3_RTS */
|
||||
{3, 6, 2, 0, 1}, /* UART3_RX */
|
||||
{3, 12, 2, 0, 0}, /* UART3_CTS */
|
||||
{3, 13, 2, 0, 0}, /* UCC5_CD */
|
||||
|
||||
/* UCC6 - UART4 */
|
||||
{3, 14, 1, 0, 1}, /* UART4_TX */
|
||||
{3, 18, 1, 0, 1}, /* UART4_RTS */
|
||||
{3, 20, 2, 0, 1}, /* UART4_RX */
|
||||
{3, 26, 2, 0, 0}, /* UART4_CTS */
|
||||
{3, 27, 2, 0, 0}, /* UCC6_CD */
|
||||
|
||||
/* Fujitsu MB86277 (MINT) graphics controller */
|
||||
{0, 30, 1, 0, 0}, /* nSRESET_GRAPHICS */
|
||||
{1, 5, 1, 0, 0}, /* nXRST_GRAPHICS */
|
||||
{1, 7, 1, 0, 0}, /* LVDS_BKLT_CTR */
|
||||
{2, 16, 1, 0, 0}, /* LVDS_BKLT_EN */
|
||||
|
||||
/* AD7843 ADC/Touchscreen controller */
|
||||
{4, 14, 1, 0, 0}, /* SPI_nCS0 */
|
||||
{4, 28, 3, 0, 3}, /* SPI_MOSI */
|
||||
{4, 29, 3, 0, 3}, /* SPI_MISO */
|
||||
{4, 30, 3, 0, 3}, /* SPI_CLK */
|
||||
|
||||
/* Freescale QUICC Engine USB Host Controller (FHCI) */
|
||||
{1, 2, 1, 0, 3}, /* USBOE */
|
||||
{1, 3, 1, 0, 3}, /* USBTP */
|
||||
{1, 8, 1, 0, 1}, /* USBTN */
|
||||
{1, 9, 2, 1, 3}, /* USBRP */
|
||||
{1, 10, 2, 0, 3}, /* USBRXD */
|
||||
{1, 11, 2, 1, 3}, /* USBRN */
|
||||
{2, 20, 2, 0, 1}, /* CLK21 */
|
||||
{4, 20, 1, 0, 0}, /* SPEED */
|
||||
{4, 21, 1, 0, 0}, /* SUSPND */
|
||||
|
||||
/* END of table */
|
||||
{0, 0, 0, 0, QE_IOP_TAB_END},
|
||||
};
|
||||
|
||||
int board_early_init_r(void)
|
||||
{
|
||||
void *reg = (void *)(CONFIG_SYS_IMMR + 0x14a8);
|
||||
u32 val;
|
||||
|
||||
/*
|
||||
* Because of errata in the UCCs, we have to write to the reserved
|
||||
* registers to slow the clocks down.
|
||||
*/
|
||||
val = in_be32(reg);
|
||||
/* UCC1 */
|
||||
val |= 0x00003000;
|
||||
/* UCC2 */
|
||||
val |= 0x0c000000;
|
||||
out_be32(reg, val);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int fixed_sdram(void)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
||||
u32 msize = 0;
|
||||
u32 ddr_size;
|
||||
u32 ddr_size_log2;
|
||||
|
||||
msize = CONFIG_SYS_DDR_SIZE;
|
||||
for (ddr_size = msize << 20, ddr_size_log2 = 0;
|
||||
(ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
|
||||
if (ddr_size & 1)
|
||||
return -1;
|
||||
}
|
||||
|
||||
im->sysconf.ddrlaw[0].ar =
|
||||
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
|
||||
|
||||
im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
|
||||
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
|
||||
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
|
||||
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
||||
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
||||
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
|
||||
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
|
||||
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
|
||||
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
|
||||
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
|
||||
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
||||
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
|
||||
udelay(200);
|
||||
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
|
||||
|
||||
return msize;
|
||||
}
|
||||
|
||||
phys_size_t initdram(int board_type)
|
||||
{
|
||||
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
||||
extern void ddr_enable_ecc(unsigned int dram_size);
|
||||
#endif
|
||||
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
||||
u32 msize = 0;
|
||||
|
||||
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
|
||||
return -1;
|
||||
|
||||
/* DDR SDRAM - Main SODIMM */
|
||||
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
|
||||
msize = fixed_sdram();
|
||||
|
||||
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
||||
/*
|
||||
* Initialize DDR ECC byte
|
||||
*/
|
||||
ddr_enable_ecc(msize * 1024 * 1024);
|
||||
#endif
|
||||
|
||||
/* return total bus SDRAM size(bytes) -- DDR */
|
||||
return (msize * 1024 * 1024);
|
||||
}
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
puts("Board: Freescale/Logic MPC8360ERDK\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct pci_region pci_regions[] = {
|
||||
{
|
||||
.bus_start = CONFIG_SYS_PCI1_MEM_BASE,
|
||||
.phys_start = CONFIG_SYS_PCI1_MEM_PHYS,
|
||||
.size = CONFIG_SYS_PCI1_MEM_SIZE,
|
||||
.flags = PCI_REGION_MEM | PCI_REGION_PREFETCH,
|
||||
},
|
||||
{
|
||||
.bus_start = CONFIG_SYS_PCI1_MMIO_BASE,
|
||||
.phys_start = CONFIG_SYS_PCI1_MMIO_PHYS,
|
||||
.size = CONFIG_SYS_PCI1_MMIO_SIZE,
|
||||
.flags = PCI_REGION_MEM,
|
||||
},
|
||||
{
|
||||
.bus_start = CONFIG_SYS_PCI1_IO_BASE,
|
||||
.phys_start = CONFIG_SYS_PCI1_IO_PHYS,
|
||||
.size = CONFIG_SYS_PCI1_IO_SIZE,
|
||||
.flags = PCI_REGION_IO,
|
||||
},
|
||||
};
|
||||
|
||||
void pci_init_board(void)
|
||||
{
|
||||
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
|
||||
volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
|
||||
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
|
||||
struct pci_region *reg[] = { pci_regions, };
|
||||
|
||||
#if defined(CONFIG_PCI_33M)
|
||||
clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
|
||||
OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
|
||||
printf("PCI clock is 33MHz\n");
|
||||
#else
|
||||
clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
|
||||
printf("PCI clock is 66MHz\n");
|
||||
#endif
|
||||
|
||||
udelay(2000);
|
||||
|
||||
/* Configure PCI Local Access Windows */
|
||||
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
|
||||
pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
|
||||
|
||||
pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
|
||||
pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
|
||||
|
||||
mpc83xx_pci_init(1, reg);
|
||||
}
|
||||
|
||||
#if defined(CONFIG_OF_BOARD_SETUP)
|
||||
int ft_board_setup(void *blob, bd_t *bd)
|
||||
{
|
||||
ft_cpu_setup(blob, bd);
|
||||
ft_pci_setup(blob, bd);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
@@ -1,89 +0,0 @@
|
||||
/*
|
||||
* MPC8360E-RDK support for the NAND on FSL UPM
|
||||
*
|
||||
* Copyright (C) 2007 MontaVista Software, Inc.
|
||||
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <config.h>
|
||||
#include <common.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/immap_83xx.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/fsl_upm.h>
|
||||
#include <nand.h>
|
||||
|
||||
static struct immap *im = (struct immap *)CONFIG_SYS_IMMR;
|
||||
|
||||
static const u32 upm_array[] = {
|
||||
0x0ff03c30, 0x0ff03c30, 0x0ff03c34, 0x0ff33c30, /* Words 0 to 3 */
|
||||
0xfff33c31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 4 to 7 */
|
||||
0x0faf3c30, 0x0faf3c30, 0x0faf3c30, 0x0fff3c34, /* Words 8 to 11 */
|
||||
0xffff3c31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 12 to 15 */
|
||||
0x0fa3fc30, 0x0fa3fc30, 0x0fa3fc30, 0x0ff3fc34, /* Words 16 to 19 */
|
||||
0xfff3fc31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 20 to 23 */
|
||||
0x0ff33c30, 0x0fa33c30, 0x0fa33c34, 0x0ff33c30, /* Words 24 to 27 */
|
||||
0xfff33c31, 0xfff0fc30, 0xfff0fc30, 0xfff0fc30, /* Words 28 to 31 */
|
||||
0xfff3fc30, 0xfff3fc30, 0xfff6fc30, 0xfffcfc30, /* Words 32 to 35 */
|
||||
0xfffcfc30, 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, /* Words 36 to 39 */
|
||||
0xfffcfc30, 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, /* Words 40 to 43 */
|
||||
0xfffdfc30, 0xfffffc30, 0xfffffc30, 0xfffffc31, /* Words 44 to 47 */
|
||||
0xfffffc30, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 48 to 51 */
|
||||
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 52 to 55 */
|
||||
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 56 to 59 */
|
||||
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 60 to 63 */
|
||||
};
|
||||
|
||||
static void upm_setup(struct fsl_upm *upm)
|
||||
{
|
||||
int i;
|
||||
|
||||
/* write upm array */
|
||||
out_be32(upm->mxmr, MxMR_OP_WARR);
|
||||
|
||||
for (i = 0; i < 64; i++) {
|
||||
out_be32(upm->mdr, upm_array[i]);
|
||||
out_8(upm->io_addr, 0x0);
|
||||
}
|
||||
|
||||
/* normal operation */
|
||||
out_be32(upm->mxmr, MxMR_OP_NORM);
|
||||
while (in_be32(upm->mxmr) != MxMR_OP_NORM)
|
||||
eieio();
|
||||
}
|
||||
|
||||
static int dev_ready(int chip_nr)
|
||||
{
|
||||
if (in_be32(&im->qepio.ioport[4].pdat) & 0x00002000) {
|
||||
debug("nand ready\n");
|
||||
return 1;
|
||||
}
|
||||
|
||||
debug("nand busy\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct fsl_upm_nand fun = {
|
||||
.upm = {
|
||||
.io_addr = (void *)CONFIG_SYS_NAND_BASE,
|
||||
},
|
||||
.width = 8,
|
||||
.upm_cmd_offset = 8,
|
||||
.upm_addr_offset = 16,
|
||||
.dev_ready = dev_ready,
|
||||
.wait_flags = FSL_UPM_WAIT_RUN_PATTERN,
|
||||
.chip_delay = 50,
|
||||
};
|
||||
|
||||
int board_nand_init(struct nand_chip *nand)
|
||||
{
|
||||
fun.upm.mxmr = &im->im_lbc.mamr;
|
||||
fun.upm.mdr = &im->im_lbc.mdr;
|
||||
fun.upm.mar = &im->im_lbc.mar;
|
||||
|
||||
upm_setup(&fun.upm);
|
||||
|
||||
return fsl_upm_nand_init(nand, &fun);
|
||||
}
|
||||
@@ -1,4 +0,0 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="CLKIN_33MHZ,PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1"
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC83xx=y
|
||||
CONFIG_TARGET_MPC8360EMDS=y
|
||||
@@ -1,4 +0,0 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="CLKIN_33MHZ,PCI,PCI_33M,PQ_MDS_PIB=1"
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC83xx=y
|
||||
CONFIG_TARGET_MPC8360EMDS=y
|
||||
@@ -1,4 +0,0 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="CLKIN_33MHZ,PCI,PCI_66M,PQ_MDS_PIB=1"
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC83xx=y
|
||||
CONFIG_TARGET_MPC8360EMDS=y
|
||||
@@ -1,4 +0,0 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="CLKIN_33MHZ,PCI,PCISLAVE"
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC83xx=y
|
||||
CONFIG_TARGET_MPC8360EMDS=y
|
||||
@@ -1,4 +0,0 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="CLKIN_33MHZ"
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC83xx=y
|
||||
CONFIG_TARGET_MPC8360EMDS=y
|
||||
@@ -1,4 +0,0 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="CLKIN_66MHZ,PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1"
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC83xx=y
|
||||
CONFIG_TARGET_MPC8360EMDS=y
|
||||
@@ -1,4 +0,0 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="CLKIN_66MHZ,PCI,PCI_33M,PQ_MDS_PIB=1"
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC83xx=y
|
||||
CONFIG_TARGET_MPC8360EMDS=y
|
||||
@@ -1,4 +0,0 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="CLKIN_66MHZ,PCI,PCI_66M,PQ_MDS_PIB=1"
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC83xx=y
|
||||
CONFIG_TARGET_MPC8360EMDS=y
|
||||
@@ -1,4 +0,0 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="CLKIN_66MHZ,PCI,PCISLAVE"
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC83xx=y
|
||||
CONFIG_TARGET_MPC8360EMDS=y
|
||||
@@ -1,4 +0,0 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="CLKIN_66MHZ"
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC83xx=y
|
||||
CONFIG_TARGET_MPC8360EMDS=y
|
||||
@@ -1,4 +0,0 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="CLKIN_33MHZ"
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC83xx=y
|
||||
CONFIG_TARGET_MPC8360ERDK=y
|
||||
@@ -1,3 +0,0 @@
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC83xx=y
|
||||
CONFIG_TARGET_MPC8360ERDK=y
|
||||
@@ -12,11 +12,13 @@ The list should be sorted in reverse chronological order.
|
||||
|
||||
Board Arch CPU Commit Removed Last known maintainer/contact
|
||||
=================================================================================================
|
||||
P3G4 powerpc 74xx_7xx - - Wolfgang Denk <wd@denx.de>
|
||||
ZUMA powerpc 74xx_7xx - - Nye Liu <nyet@zumanetworks.com>
|
||||
ppmc7xx powerpc 74xx_7xx - -
|
||||
ELPPC powerpc 74xx_7xx - -
|
||||
mpc7448hpc2 powerpc 74xx_7xx - - Roy Zang <tie-fei.zang@freescale.com>
|
||||
MPC8360EMDS powerpc mpc83xx - - Dave Liu <daveliu@freescale.com>
|
||||
MPC8360ERDK powerpc mpc83xx - - Anton Vorontsov <avorontsov@ru.mvista.com>
|
||||
P3G4 powerpc 74xx_7xx d928664f 2015-01-16 Wolfgang Denk <wd@denx.de>
|
||||
ZUMA powerpc 74xx_7xx d928664f 2015-01-16 Nye Liu <nyet@zumanetworks.com>
|
||||
ppmc7xx powerpc 74xx_7xx d928664f 2015-01-16
|
||||
ELPPC powerpc 74xx_7xx d928664f 2015-01-16
|
||||
mpc7448hpc2 powerpc 74xx_7xx d928664f 2015-01-16 Roy Zang <tie-fei.zang@freescale.com>
|
||||
CPCI405 ppc4xx 405gp 5f1459dc 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu>
|
||||
CPCI405DT ppc4xx 405gpr 5f1459dc 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu>
|
||||
CPCI405AB ppc4xx 405gpr 5f1459dc 2015-01-13 Matthias Fuchs <matthias.fuchs@esd.eu>
|
||||
|
||||
@@ -1,735 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2006,2011 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Dave Liu <daveliu@freescale.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
*/
|
||||
#define CONFIG_E300 1 /* E300 family */
|
||||
#define CONFIG_QE 1 /* Has QE */
|
||||
#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */
|
||||
#define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0xFE000000
|
||||
|
||||
#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
|
||||
#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */
|
||||
|
||||
/*
|
||||
* System Clock Setup
|
||||
*/
|
||||
#ifdef CONFIG_CLKIN_33MHZ
|
||||
#ifdef CONFIG_PCISLAVE
|
||||
#define CONFIG_83XX_PCICLK 33330000 /* in HZ */
|
||||
#else
|
||||
#define CONFIG_83XX_CLKIN 33330000 /* in Hz */
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_SYS_CLK_FREQ
|
||||
#define CONFIG_SYS_CLK_FREQ 33330000
|
||||
#endif
|
||||
|
||||
#elif defined(CONFIG_CLKIN_66MHZ)
|
||||
#ifdef CONFIG_PCISLAVE
|
||||
#define CONFIG_83XX_PCICLK 66000000 /* in HZ */
|
||||
#else
|
||||
#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_SYS_CLK_FREQ
|
||||
#define CONFIG_SYS_CLK_FREQ 66000000
|
||||
#endif
|
||||
#else
|
||||
#error Unknown oscillator frequency.
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Hardware Reset Configuration Word
|
||||
*/
|
||||
#ifdef CONFIG_CLKIN_33MHZ
|
||||
#define CONFIG_SYS_HRCW_LOW (\
|
||||
HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
|
||||
HRCWL_DDR_TO_SCB_CLK_1X1 |\
|
||||
HRCWL_CSB_TO_CLKIN_8X1 |\
|
||||
HRCWL_VCO_1X2 |\
|
||||
HRCWL_CE_PLL_VCO_DIV_4 |\
|
||||
HRCWL_CE_PLL_DIV_1X1 |\
|
||||
HRCWL_CE_TO_PLL_1X15 |\
|
||||
HRCWL_CORE_TO_CSB_2X1)
|
||||
#elif defined(CONFIG_CLKIN_66MHZ)
|
||||
#define CONFIG_SYS_HRCW_LOW (\
|
||||
HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
|
||||
HRCWL_DDR_TO_SCB_CLK_1X1 |\
|
||||
HRCWL_CSB_TO_CLKIN_4X1 |\
|
||||
HRCWL_VCO_1X2 |\
|
||||
HRCWL_CE_PLL_VCO_DIV_4 |\
|
||||
HRCWL_CE_PLL_DIV_1X1 |\
|
||||
HRCWL_CE_TO_PLL_1X6 |\
|
||||
HRCWL_CORE_TO_CSB_2X1)
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PCISLAVE
|
||||
#define CONFIG_SYS_HRCW_HIGH (\
|
||||
HRCWH_PCI_AGENT |\
|
||||
HRCWH_PCI1_ARBITER_DISABLE |\
|
||||
HRCWH_PCICKDRV_DISABLE |\
|
||||
HRCWH_CORE_ENABLE |\
|
||||
HRCWH_FROM_0XFFF00100 |\
|
||||
HRCWH_BOOTSEQ_DISABLE |\
|
||||
HRCWH_SW_WATCHDOG_DISABLE |\
|
||||
HRCWH_ROM_LOC_LOCAL_16BIT)
|
||||
#else
|
||||
#define CONFIG_SYS_HRCW_HIGH (\
|
||||
HRCWH_PCI_HOST |\
|
||||
HRCWH_PCI1_ARBITER_ENABLE |\
|
||||
HRCWH_PCICKDRV_ENABLE |\
|
||||
HRCWH_CORE_ENABLE |\
|
||||
HRCWH_FROM_0X00000100 |\
|
||||
HRCWH_BOOTSEQ_DISABLE |\
|
||||
HRCWH_SW_WATCHDOG_DISABLE |\
|
||||
HRCWH_ROM_LOC_LOCAL_16BIT)
|
||||
#endif
|
||||
|
||||
/*
|
||||
* System IO Config
|
||||
*/
|
||||
#define CONFIG_SYS_SICRH 0x00000000
|
||||
#define CONFIG_SYS_SICRL 0x40000000
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
|
||||
#define CONFIG_BOARD_EARLY_INIT_R
|
||||
|
||||
/*
|
||||
* IMMR new address
|
||||
*/
|
||||
#define CONFIG_SYS_IMMR 0xE0000000
|
||||
|
||||
/*
|
||||
* DDR Setup
|
||||
*/
|
||||
#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */
|
||||
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
|
||||
/* + 256M */
|
||||
#define CONFIG_SYS_SDRAM_BASE2 (CONFIG_SYS_SDRAM_BASE + 0x10000000)
|
||||
#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
|
||||
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \
|
||||
| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
|
||||
|
||||
#define CONFIG_SYS_83XX_DDR_USES_CS0
|
||||
|
||||
#define CONFIG_DDR_ECC /* support DDR ECC function */
|
||||
#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */
|
||||
|
||||
/*
|
||||
* DDRCDR - DDR Control Driver Register
|
||||
*/
|
||||
#define CONFIG_SYS_DDRCDR_VALUE 0x80080001
|
||||
|
||||
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
||||
#if defined(CONFIG_SPD_EEPROM)
|
||||
/*
|
||||
* Determine DDR configuration from I2C interface.
|
||||
*/
|
||||
#define SPD_EEPROM_ADDRESS 0x52 /* DDR SODIMM */
|
||||
#else
|
||||
/*
|
||||
* Manually set up DDR parameters
|
||||
*/
|
||||
#define CONFIG_SYS_DDR_SIZE 256 /* MB */
|
||||
#if defined(CONFIG_DDR_II)
|
||||
#define CONFIG_SYS_DDRCDR 0x80080001
|
||||
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f
|
||||
#define CONFIG_SYS_DDR_CS0_CONFIG 0x80330102
|
||||
#define CONFIG_SYS_DDR_TIMING_0 0x00220802
|
||||
#define CONFIG_SYS_DDR_TIMING_1 0x38357322
|
||||
#define CONFIG_SYS_DDR_TIMING_2 0x2f9048c8
|
||||
#define CONFIG_SYS_DDR_TIMING_3 0x00000000
|
||||
#define CONFIG_SYS_DDR_CLK_CNTL 0x02000000
|
||||
#define CONFIG_SYS_DDR_MODE 0x47d00432
|
||||
#define CONFIG_SYS_DDR_MODE2 0x8000c000
|
||||
#define CONFIG_SYS_DDR_INTERVAL 0x03cf0080
|
||||
#define CONFIG_SYS_DDR_SDRAM_CFG 0x43000000
|
||||
#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000
|
||||
#else
|
||||
#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
|
||||
| CSCONFIG_ROW_BIT_13 \
|
||||
| CSCONFIG_COL_BIT_9)
|
||||
#define CONFIG_SYS_DDR_CS1_CONFIG CONFIG_SYS_DDR_CS0_CONFIG
|
||||
#define CONFIG_SYS_DDR_TIMING_1 0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */
|
||||
#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* may need tuning */
|
||||
#define CONFIG_SYS_DDR_CONTROL 0x42008000 /* Self refresh,2T timing */
|
||||
#define CONFIG_SYS_DDR_MODE 0x20000162 /* DLL,normal,seq,4/2.5 */
|
||||
#define CONFIG_SYS_DDR_INTERVAL 0x045b0100 /* page mode */
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Memory test
|
||||
*/
|
||||
#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x00100000
|
||||
|
||||
/*
|
||||
* The reserved memory
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
|
||||
|
||||
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
||||
#define CONFIG_SYS_RAMBOOT
|
||||
#else
|
||||
#undef CONFIG_SYS_RAMBOOT
|
||||
#endif
|
||||
|
||||
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
|
||||
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
|
||||
#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */
|
||||
|
||||
/*
|
||||
* Initial RAM Base Address Setup
|
||||
*/
|
||||
#define CONFIG_SYS_INIT_RAM_LOCK 1
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
/*
|
||||
* Local Bus Configuration & Clock Setup
|
||||
*/
|
||||
#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
|
||||
#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
|
||||
#define CONFIG_SYS_LBC_LBCR 0x00000000
|
||||
|
||||
/*
|
||||
* FLASH on the Local Bus
|
||||
*/
|
||||
#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
|
||||
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */
|
||||
#define CONFIG_SYS_FLASH_SIZE 32 /* max FLASH size is 32M */
|
||||
#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
|
||||
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
|
||||
|
||||
/* Window base at flash base */
|
||||
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
|
||||
#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB)
|
||||
|
||||
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \
|
||||
| BR_PS_16 /* 16 bit port */ \
|
||||
| BR_MS_GPCM /* MSEL = GPCM */ \
|
||||
| BR_V) /* valid */
|
||||
#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
|
||||
| OR_GPCM_XAM \
|
||||
| OR_GPCM_CSNT \
|
||||
| OR_GPCM_ACS_DIV2 \
|
||||
| OR_GPCM_XACS \
|
||||
| OR_GPCM_SCY_15 \
|
||||
| OR_GPCM_TRLX_SET \
|
||||
| OR_GPCM_EHTR_SET \
|
||||
| OR_GPCM_EAD)
|
||||
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */
|
||||
|
||||
#undef CONFIG_SYS_FLASH_CHECKSUM
|
||||
|
||||
/*
|
||||
* BCSR on the Local Bus
|
||||
*/
|
||||
#define CONFIG_SYS_BCSR 0xF8000000
|
||||
/* Access window base at BCSR base */
|
||||
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR
|
||||
#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_64KB)
|
||||
|
||||
#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \
|
||||
| BR_PS_8 \
|
||||
| BR_MS_GPCM \
|
||||
| BR_V)
|
||||
#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \
|
||||
| OR_GPCM_XAM \
|
||||
| OR_GPCM_CSNT \
|
||||
| OR_GPCM_XACS \
|
||||
| OR_GPCM_SCY_15 \
|
||||
| OR_GPCM_TRLX_SET \
|
||||
| OR_GPCM_EHTR_SET \
|
||||
| OR_GPCM_EAD)
|
||||
/* 0xFFFFE9F7 */
|
||||
|
||||
/*
|
||||
* SDRAM on the Local Bus
|
||||
*/
|
||||
#define CONFIG_SYS_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */
|
||||
#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
|
||||
|
||||
#define CONFIG_SYS_LB_SDRAM /* if board has SRDAM on local bus */
|
||||
|
||||
#ifdef CONFIG_SYS_LB_SDRAM
|
||||
#define CONFIG_SYS_LBLAWBAR2 0
|
||||
#define CONFIG_SYS_LBLAWAR2 (LBLAWAR_EN | LBLAWAR_64MB)
|
||||
|
||||
/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
|
||||
/*
|
||||
* Base Register 2 and Option Register 2 configure SDRAM.
|
||||
*
|
||||
* For BR2, need:
|
||||
* Base address = BR[0:16] = dynamic
|
||||
* port size = 32-bits = BR2[19:20] = 11
|
||||
* no parity checking = BR2[21:22] = 00
|
||||
* SDRAM for MSEL = BR2[24:26] = 011
|
||||
* Valid = BR[31] = 1
|
||||
*
|
||||
* 0 4 8 12 16 20 24 28
|
||||
* xxxx xxxx xxxx xxxx x001 1000 0110 0001 = 00001861
|
||||
*/
|
||||
|
||||
/* Port size=32bit, MSEL=DRAM */
|
||||
#define CONFIG_SYS_BR2 (BR_PS_32 | BR_MS_SDRAM | BR_V) /* 0xF0001861 */
|
||||
|
||||
/*
|
||||
* The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
|
||||
*
|
||||
* For OR2, need:
|
||||
* 64MB mask for AM, OR2[0:7] = 1111 1100
|
||||
* XAM, OR2[17:18] = 11
|
||||
* 9 columns OR2[19-21] = 010
|
||||
* 13 rows OR2[23-25] = 100
|
||||
* EAD set for extra time OR[31] = 1
|
||||
*
|
||||
* 0 4 8 12 16 20 24 28
|
||||
* 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_OR2 (MEG_TO_AM(CONFIG_SYS_LBC_SDRAM_SIZE) \
|
||||
| OR_SDRAM_XAM \
|
||||
| ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \
|
||||
| ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \
|
||||
| OR_SDRAM_EAD)
|
||||
/* 0xFC006901 */
|
||||
|
||||
/* LB sdram refresh timer, about 6us */
|
||||
#define CONFIG_SYS_LBC_LSRT 0x32000000
|
||||
/* LB refresh timer prescal, 266MHz/32 */
|
||||
#define CONFIG_SYS_LBC_MRTPR 0x20000000
|
||||
|
||||
#define CONFIG_SYS_LBC_LSDMR_COMMON 0x0063b723
|
||||
|
||||
/*
|
||||
* SDRAM Controller configuration sequence.
|
||||
*/
|
||||
#define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
|
||||
#define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
|
||||
#define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
|
||||
#define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
|
||||
#define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL)
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Windows to access Platform I/O Boards (PIB) via local bus
|
||||
*/
|
||||
#define CONFIG_SYS_PIB_BASE 0xF8008000
|
||||
#define CONFIG_SYS_PIB_WINDOW_SIZE (32 * 1024)
|
||||
|
||||
/* [RFC] This LBLAW only covers the 2nd window (CS5) */
|
||||
#define CONFIG_SYS_LBLAWBAR3_PRELIM \
|
||||
CONFIG_SYS_PIB_BASE + CONFIG_SYS_PIB_WINDOW_SIZE
|
||||
#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_32KB)
|
||||
|
||||
/*
|
||||
* CS4 on Local Bus, to PIB
|
||||
*/
|
||||
/* CS4 base address at 0xf8008000 */
|
||||
#define CONFIG_SYS_BR4_PRELIM (CONFIG_SYS_PIB_BASE \
|
||||
| BR_PS_8 \
|
||||
| BR_MS_GPCM \
|
||||
| BR_V)
|
||||
/* 0xF8008801 */
|
||||
#define CONFIG_SYS_OR4_PRELIM (OR_AM_32KB \
|
||||
| OR_GPCM_XAM \
|
||||
| OR_GPCM_CSNT \
|
||||
| OR_GPCM_XACS \
|
||||
| OR_GPCM_SCY_15 \
|
||||
| OR_GPCM_TRLX_SET \
|
||||
| OR_GPCM_EHTR_SET \
|
||||
| OR_GPCM_EAD)
|
||||
/* 0xffffe9f7 */
|
||||
|
||||
/*
|
||||
* CS5 on Local Bus, to PIB
|
||||
*/
|
||||
/* CS5 base address at 0xf8010000 */
|
||||
#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_PIB_BASE + \
|
||||
CONFIG_SYS_PIB_WINDOW_SIZE) \
|
||||
| BR_PS_8 \
|
||||
| BR_MS_GPCM \
|
||||
| BR_V)
|
||||
/* 0xF8010801 */
|
||||
#define CONFIG_SYS_OR5_PRELIM (CONFIG_SYS_PIB_BASE \
|
||||
| OR_GPCM_XAM \
|
||||
| OR_GPCM_CSNT \
|
||||
| OR_GPCM_XACS \
|
||||
| OR_GPCM_SCY_15 \
|
||||
| OR_GPCM_TRLX_SET \
|
||||
| OR_GPCM_EHTR_SET \
|
||||
| OR_GPCM_EAD)
|
||||
/* 0xffffe9f7 */
|
||||
|
||||
/*
|
||||
* Serial Port
|
||||
*/
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
||||
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
|
||||
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
|
||||
|
||||
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
|
||||
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
||||
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
|
||||
/* Use the HUSH parser */
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
|
||||
/* pass open firmware flat tree */
|
||||
#define CONFIG_OF_LIBFDT 1
|
||||
#define CONFIG_OF_BOARD_SETUP 1
|
||||
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_FSL
|
||||
#define CONFIG_SYS_FSL_I2C_SPEED 400000
|
||||
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
|
||||
#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
|
||||
#define CONFIG_SYS_I2C_NOPROBES { {0, 0x52} }
|
||||
|
||||
/*
|
||||
* Config on-board RTC
|
||||
*/
|
||||
#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
|
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
|
||||
|
||||
/*
|
||||
* General PCI
|
||||
* Addresses are mapped 1-1.
|
||||
*/
|
||||
#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
|
||||
#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
|
||||
#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
|
||||
#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
|
||||
#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
|
||||
#define CONFIG_SYS_PCI1_IO_PHYS 0xE0300000
|
||||
#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */
|
||||
|
||||
#define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE
|
||||
#define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000
|
||||
#define CONFIG_SYS_PCI_SLV_MEM_SIZE 0x80000000
|
||||
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
#define CONFIG_PCI_INDIRECT_BRIDGE
|
||||
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
#define CONFIG_83XX_PCI_STREAMING
|
||||
|
||||
#undef CONFIG_EEPRO100
|
||||
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
|
||||
#define CONFIG_HWCONFIG 1
|
||||
|
||||
/*
|
||||
* QE UEC ethernet configuration
|
||||
*/
|
||||
#define CONFIG_UEC_ETH
|
||||
#define CONFIG_ETHPRIME "UEC0"
|
||||
#define CONFIG_PHY_MODE_NEED_CHANGE
|
||||
|
||||
#define CONFIG_UEC_ETH1 /* GETH1 */
|
||||
|
||||
#ifdef CONFIG_UEC_ETH1
|
||||
#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
|
||||
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE
|
||||
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
|
||||
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
|
||||
#define CONFIG_SYS_UEC1_PHY_ADDR 0
|
||||
#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
|
||||
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
|
||||
#endif
|
||||
|
||||
#define CONFIG_UEC_ETH2 /* GETH2 */
|
||||
|
||||
#ifdef CONFIG_UEC_ETH2
|
||||
#define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */
|
||||
#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE
|
||||
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
|
||||
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
|
||||
#define CONFIG_SYS_UEC2_PHY_ADDR 1
|
||||
#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
|
||||
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_SYS_RAMBOOT
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_ADDR \
|
||||
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#else
|
||||
#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
|
||||
#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#endif
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_ASKENV
|
||||
#define CONFIG_CMD_SDRAM
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
#define CONFIG_CMD_PCI
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SYS_RAMBOOT)
|
||||
#undef CONFIG_CMD_SAVEENV
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#endif
|
||||
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 256 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
/*
|
||||
* Core HID Setup
|
||||
*/
|
||||
#define CONFIG_SYS_HID0_INIT 0x000000000
|
||||
#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
|
||||
HID0_ENABLE_INSTRUCTION_CACHE)
|
||||
#define CONFIG_SYS_HID2 HID2_HBE
|
||||
|
||||
/*
|
||||
* MMU Setup
|
||||
*/
|
||||
|
||||
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
||||
#define CONFIG_BAT_RW
|
||||
|
||||
/* DDR/LBC SDRAM: cacheable */
|
||||
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \
|
||||
| BATL_PP_RW \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
|
||||
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
|
||||
|
||||
/* IMMRBAR & PCI IO: cache-inhibit and guarded */
|
||||
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR \
|
||||
| BATL_PP_RW \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR \
|
||||
| BATU_BL_4M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
|
||||
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
|
||||
|
||||
/* BCSR: cache-inhibit and guarded */
|
||||
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_BCSR \
|
||||
| BATL_PP_RW \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_BCSR \
|
||||
| BATU_BL_128K \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
|
||||
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
|
||||
|
||||
/* FLASH: icache cacheable, but dcache-inhibit and guarded */
|
||||
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE \
|
||||
| BATL_PP_RW \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE \
|
||||
| BATU_BL_32M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE \
|
||||
| BATL_PP_RW \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
|
||||
|
||||
/* DDR/LBC SDRAM next 256M: cacheable */
|
||||
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM_BASE2 \
|
||||
| BATL_PP_RW \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM_BASE2 \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
|
||||
#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
|
||||
|
||||
/* Stack in dcache: cacheable, no memory coherence */
|
||||
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
|
||||
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR \
|
||||
| BATU_BL_128K \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
|
||||
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
/* PCI MEM space: cacheable */
|
||||
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI1_MEM_PHYS \
|
||||
| BATL_PP_RW \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI1_MEM_PHYS \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
|
||||
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
|
||||
/* PCI MMIO space: cache-inhibit and guarded */
|
||||
#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI1_MMIO_PHYS \
|
||||
| BATL_PP_RW \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI1_MMIO_PHYS \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
|
||||
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
|
||||
#else
|
||||
#define CONFIG_SYS_IBAT6L (0)
|
||||
#define CONFIG_SYS_IBAT6U (0)
|
||||
#define CONFIG_SYS_IBAT7L (0)
|
||||
#define CONFIG_SYS_IBAT7U (0)
|
||||
#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
|
||||
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
|
||||
#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
|
||||
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Environment Configuration
|
||||
*/
|
||||
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
#if defined(CONFIG_UEC_ETH)
|
||||
#define CONFIG_HAS_ETH0
|
||||
#define CONFIG_HAS_ETH1
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
|
||||
|
||||
#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
|
||||
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=1000000\0" \
|
||||
"ramdiskfile=ramfs.83xx\0" \
|
||||
"fdtaddr=780000\0" \
|
||||
"fdtfile=mpc836x_mds.dtb\0" \
|
||||
""
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \
|
||||
"$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr - $fdtaddr"
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
@@ -1,620 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2006 Freescale Semiconductor, Inc.
|
||||
* Dave Liu <daveliu@freescale.com>
|
||||
*
|
||||
* Copyright (C) 2007 Logic Product Development, Inc.
|
||||
* Peter Barada <peterb@logicpd.com>
|
||||
*
|
||||
* Copyright (C) 2007 MontaVista Software, Inc.
|
||||
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
*/
|
||||
#define CONFIG_E300 1 /* E300 family */
|
||||
#define CONFIG_QE 1 /* Has QE */
|
||||
#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */
|
||||
#define CONFIG_MPC8360ERDK 1 /* MPC8360ERDK board specific */
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0xFF800000
|
||||
|
||||
/*
|
||||
* System Clock Setup
|
||||
*/
|
||||
#ifdef CONFIG_CLKIN_33MHZ
|
||||
#define CONFIG_83XX_CLKIN 33333333
|
||||
#define CONFIG_SYS_CLK_FREQ 33333333
|
||||
#define CONFIG_PCI_33M 1
|
||||
#define HRCWL_CSB_TO_CLKIN_MPC8360ERDK HRCWL_CSB_TO_CLKIN_10X1
|
||||
#else
|
||||
#define CONFIG_83XX_CLKIN 66000000
|
||||
#define CONFIG_SYS_CLK_FREQ 66000000
|
||||
#define CONFIG_PCI_66M 1
|
||||
#define HRCWL_CSB_TO_CLKIN_MPC8360ERDK HRCWL_CSB_TO_CLKIN_5X1
|
||||
#endif /* CONFIG_CLKIN_33MHZ */
|
||||
|
||||
/*
|
||||
* Hardware Reset Configuration Word
|
||||
*/
|
||||
#define CONFIG_SYS_HRCW_LOW (\
|
||||
HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
|
||||
HRCWL_DDR_TO_SCB_CLK_1X1 |\
|
||||
HRCWL_CSB_TO_CLKIN_MPC8360ERDK |\
|
||||
HRCWL_CORE_TO_CSB_2X1 |\
|
||||
HRCWL_CE_TO_PLL_1X15)
|
||||
|
||||
#define CONFIG_SYS_HRCW_HIGH (\
|
||||
HRCWH_PCI_HOST |\
|
||||
HRCWH_PCI1_ARBITER_ENABLE |\
|
||||
HRCWH_PCICKDRV_ENABLE |\
|
||||
HRCWH_CORE_ENABLE |\
|
||||
HRCWH_FROM_0X00000100 |\
|
||||
HRCWH_BOOTSEQ_DISABLE |\
|
||||
HRCWH_SW_WATCHDOG_DISABLE |\
|
||||
HRCWH_ROM_LOC_LOCAL_16BIT |\
|
||||
HRCWH_SECONDARY_DDR_DISABLE |\
|
||||
HRCWH_BIG_ENDIAN |\
|
||||
HRCWH_LALE_EARLY)
|
||||
|
||||
/*
|
||||
* System IO Config
|
||||
*/
|
||||
#define CONFIG_SYS_SICRH 0x00000000
|
||||
#define CONFIG_SYS_SICRL 0x40000000
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_R
|
||||
|
||||
/*
|
||||
* IMMR new address
|
||||
*/
|
||||
#define CONFIG_SYS_IMMR 0xE0000000
|
||||
|
||||
/*
|
||||
* DDR Setup
|
||||
*/
|
||||
#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */
|
||||
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
|
||||
#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
|
||||
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \
|
||||
| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
|
||||
|
||||
#define CONFIG_SYS_83XX_DDR_USES_CS0
|
||||
|
||||
#define CONFIG_DDR_ECC /* support DDR ECC function */
|
||||
#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */
|
||||
|
||||
/*
|
||||
* DDRCDR - DDR Control Driver Register
|
||||
*/
|
||||
#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_DHC_EN \
|
||||
| DDRCDR_ODT \
|
||||
| DDRCDR_Q_DRN)
|
||||
/* 0x80080001 */
|
||||
|
||||
#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup */
|
||||
|
||||
/*
|
||||
* Manually set up DDR parameters
|
||||
*/
|
||||
#define CONFIG_DDR_II
|
||||
#define CONFIG_SYS_DDR_SIZE 256 /* MB */
|
||||
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f
|
||||
#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
|
||||
| CSCONFIG_ROW_BIT_13 \
|
||||
| CSCONFIG_COL_BIT_10 \
|
||||
| CSCONFIG_ODT_WR_ONLY_CURRENT)
|
||||
#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 \
|
||||
| SDRAM_CFG_ECC_EN)
|
||||
#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00001000
|
||||
#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
|
||||
#define CONFIG_SYS_DDR_INTERVAL ((256 << SDRAM_INTERVAL_BSTOPRE_SHIFT) \
|
||||
| (1115 << SDRAM_INTERVAL_REFINT_SHIFT))
|
||||
#define CONFIG_SYS_DDR_MODE 0x47800432
|
||||
#define CONFIG_SYS_DDR_MODE2 0x8000c000
|
||||
|
||||
#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
|
||||
(9 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
|
||||
(3 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
|
||||
(3 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
|
||||
(0 << TIMING_CFG0_WWT_SHIFT) | \
|
||||
(0 << TIMING_CFG0_RRT_SHIFT) | \
|
||||
(0 << TIMING_CFG0_WRT_SHIFT) | \
|
||||
(0 << TIMING_CFG0_RWT_SHIFT))
|
||||
|
||||
#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_30) | \
|
||||
(2 << TIMING_CFG1_WRTORD_SHIFT) | \
|
||||
(2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
|
||||
(3 << TIMING_CFG1_WRREC_SHIFT) | \
|
||||
(10 << TIMING_CFG1_REFREC_SHIFT) | \
|
||||
(3 << TIMING_CFG1_ACTTORW_SHIFT) | \
|
||||
(8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
|
||||
(3 << TIMING_CFG1_PRETOACT_SHIFT))
|
||||
|
||||
#define CONFIG_SYS_DDR_TIMING_2 ((9 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
|
||||
(4 << TIMING_CFG2_CKE_PLS_SHIFT) | \
|
||||
(2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
|
||||
(2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
|
||||
(2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
|
||||
(0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
|
||||
(0 << TIMING_CFG2_CPO_SHIFT))
|
||||
|
||||
#define CONFIG_SYS_DDR_TIMING_3 0x00000000
|
||||
|
||||
/*
|
||||
* Memory test
|
||||
*/
|
||||
#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x00100000
|
||||
|
||||
/*
|
||||
* The reserved memory
|
||||
*/
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* FLASH base address */
|
||||
|
||||
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
||||
#define CONFIG_SYS_RAMBOOT
|
||||
#else
|
||||
#undef CONFIG_SYS_RAMBOOT
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
|
||||
#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */
|
||||
|
||||
/*
|
||||
* Initial RAM Base Address Setup
|
||||
*/
|
||||
#define CONFIG_SYS_INIT_RAM_LOCK 1
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
/*
|
||||
* Local Bus Configuration & Clock Setup
|
||||
*/
|
||||
#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
|
||||
#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
|
||||
#define CONFIG_SYS_LBC_LBCR 0x00000000
|
||||
|
||||
/*
|
||||
* FLASH on the Local Bus
|
||||
*/
|
||||
#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
|
||||
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
|
||||
#define CONFIG_SYS_FLASH_SIZE 8 /* max FLASH size is 32M */
|
||||
#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use intel Flash protection. */
|
||||
|
||||
/* Window base at flash base */
|
||||
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
|
||||
#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB)
|
||||
|
||||
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \
|
||||
| BR_PS_16 /* 16 bit port */ \
|
||||
| BR_MS_GPCM /* MSEL = GPCM */ \
|
||||
| BR_V) /* valid */
|
||||
#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
|
||||
| OR_UPM_XAM \
|
||||
| OR_GPCM_CSNT \
|
||||
| OR_GPCM_ACS_DIV2 \
|
||||
| OR_GPCM_XACS \
|
||||
| OR_GPCM_SCY_15 \
|
||||
| OR_GPCM_TRLX_SET \
|
||||
| OR_GPCM_EHTR_SET \
|
||||
| OR_GPCM_EAD)
|
||||
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */
|
||||
|
||||
#undef CONFIG_SYS_FLASH_CHECKSUM
|
||||
|
||||
/*
|
||||
* NAND flash on the local bus
|
||||
*/
|
||||
#define CONFIG_SYS_NAND_BASE 0x60000000
|
||||
#define CONFIG_CMD_NAND 1
|
||||
#define CONFIG_NAND_FSL_UPM 1
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_MTD_NAND_VERIFY_WRITE
|
||||
|
||||
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
|
||||
/*
|
||||
* [RFC] Comment said 4KB window; code said 256MB window; OR1 says 64MB
|
||||
* ... What's correct?
|
||||
*/
|
||||
#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
|
||||
|
||||
/* Port size 8 bit, UPMA */
|
||||
#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \
|
||||
| BR_PS_8 \
|
||||
| BR_MS_UPMA \
|
||||
| BR_V)
|
||||
/* 0x60000881 */
|
||||
#define CONFIG_SYS_OR1_PRELIM (OR_AM_64MB | OR_UPM_EAD)
|
||||
/* 0xFC000001 */
|
||||
|
||||
/*
|
||||
* Fujitsu MB86277 (MINT) graphics controller
|
||||
*/
|
||||
#define CONFIG_SYS_VIDEO_BASE 0x70000000
|
||||
|
||||
#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VIDEO_BASE
|
||||
#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_64MB)
|
||||
|
||||
/* Port size 32 bit, UPMB */
|
||||
#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VIDEO_BASE \
|
||||
| BR_PS_32 \
|
||||
| BR_MS_UPMB \
|
||||
| BR_V)
|
||||
/* 0x000018a1 */
|
||||
#define CONFIG_SYS_OR2_PRELIM (OR_AM_64MB | OR_UPM_EAD)
|
||||
/* 0xFC000001 */
|
||||
|
||||
/*
|
||||
* Serial Port
|
||||
*/
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
||||
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
|
||||
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
|
||||
|
||||
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
|
||||
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
||||
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
|
||||
/* Use the HUSH parser */
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
|
||||
/* Pass open firmware flat tree */
|
||||
#define CONFIG_OF_LIBFDT 1
|
||||
#define CONFIG_OF_BOARD_SETUP 1
|
||||
#define CONFIG_OF_STDOUT_VIA_ALIAS
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_FSL
|
||||
#define CONFIG_SYS_FSL_I2C_SPEED 400000
|
||||
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
|
||||
#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
|
||||
#define CONFIG_SYS_FSL_I2C2_SPEED 400000
|
||||
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
|
||||
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
|
||||
#define CONFIG_SYS_I2C_NOPROBES { {0, 0x52} }
|
||||
|
||||
/*
|
||||
* General PCI
|
||||
* Addresses are mapped 1-1.
|
||||
*/
|
||||
#define CONFIG_PCI
|
||||
|
||||
#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
|
||||
#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
|
||||
#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
|
||||
#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
|
||||
#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI1_IO_BASE 0xE0300000
|
||||
#define CONFIG_SYS_PCI1_IO_PHYS 0xE0300000
|
||||
#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
#define CONFIG_PCI_INDIRECT_BRIDGE
|
||||
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
|
||||
#undef CONFIG_EEPRO100
|
||||
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
/*
|
||||
* QE UEC ethernet configuration
|
||||
*/
|
||||
#define CONFIG_UEC_ETH
|
||||
#define CONFIG_ETHPRIME "UEC0"
|
||||
|
||||
#define CONFIG_UEC_ETH1 /* GETH1 */
|
||||
|
||||
#ifdef CONFIG_UEC_ETH1
|
||||
#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
|
||||
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE
|
||||
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
|
||||
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
|
||||
#define CONFIG_SYS_UEC1_PHY_ADDR 2
|
||||
#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID
|
||||
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
|
||||
#endif
|
||||
|
||||
#define CONFIG_UEC_ETH2 /* GETH2 */
|
||||
|
||||
#ifdef CONFIG_UEC_ETH2
|
||||
#define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */
|
||||
#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE
|
||||
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
|
||||
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
|
||||
#define CONFIG_SYS_UEC2_PHY_ADDR 4
|
||||
#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID
|
||||
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_SYS_RAMBOOT
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
|
||||
#define CONFIG_ENV_SIZE 0x20000
|
||||
#else /* CONFIG_SYS_RAMBOOT */
|
||||
#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
|
||||
#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#endif /* CONFIG_SYS_RAMBOOT */
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_ASKENV
|
||||
#define CONFIG_CMD_DHCP
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
#define CONFIG_CMD_PCI
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SYS_RAMBOOT)
|
||||
#undef CONFIG_CMD_SAVEENV
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#endif
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 256 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
/*
|
||||
* Core HID Setup
|
||||
*/
|
||||
#define CONFIG_SYS_HID0_INIT 0x000000000
|
||||
#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
|
||||
HID0_ENABLE_INSTRUCTION_CACHE)
|
||||
#define CONFIG_SYS_HID2 HID2_HBE
|
||||
|
||||
/*
|
||||
* MMU Setup
|
||||
*/
|
||||
|
||||
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
||||
|
||||
/* DDR: cache cacheable */
|
||||
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \
|
||||
| BATL_PP_RW \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
|
||||
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
|
||||
|
||||
/* IMMRBAR & PCI IO: cache-inhibit and guarded */
|
||||
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR \
|
||||
| BATL_PP_RW \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR \
|
||||
| BATU_BL_4M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
|
||||
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
|
||||
|
||||
/* NAND: cache-inhibit and guarded */
|
||||
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_NAND_BASE \
|
||||
| BATL_PP_RW \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_NAND_BASE \
|
||||
| BATU_BL_64M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
|
||||
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
|
||||
|
||||
/* FLASH: icache cacheable, but dcache-inhibit and guarded */
|
||||
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE \
|
||||
| BATL_PP_RW \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE \
|
||||
| BATU_BL_32M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE \
|
||||
| BATL_PP_RW \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
|
||||
|
||||
/* Stack in dcache: cacheable, no memory coherence */
|
||||
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR \
|
||||
| BATL_PP_RW)
|
||||
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR \
|
||||
| BATU_BL_128K \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
|
||||
#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
|
||||
|
||||
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_VIDEO_BASE \
|
||||
| BATL_PP_RW \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_VIDEO_BASE \
|
||||
| BATU_BL_64M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
|
||||
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
/* PCI MEM space: cacheable */
|
||||
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI1_MEM_PHYS \
|
||||
| BATL_PP_RW \
|
||||
| BATL_MEMCOHERENCE)
|
||||
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI1_MEM_PHYS \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
|
||||
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
|
||||
/* PCI MMIO space: cache-inhibit and guarded */
|
||||
#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI1_MMIO_PHYS \
|
||||
| BATL_PP_RW \
|
||||
| BATL_CACHEINHIBIT \
|
||||
| BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI1_MMIO_PHYS \
|
||||
| BATU_BL_256M \
|
||||
| BATU_VS \
|
||||
| BATU_VP)
|
||||
#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
|
||||
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
|
||||
#else /* CONFIG_PCI */
|
||||
#define CONFIG_SYS_IBAT6L (0)
|
||||
#define CONFIG_SYS_IBAT6U (0)
|
||||
#define CONFIG_SYS_IBAT7L (0)
|
||||
#define CONFIG_SYS_IBAT7U (0)
|
||||
#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
|
||||
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
|
||||
#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
|
||||
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Environment Configuration
|
||||
*/
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
#if defined(CONFIG_UEC_ETH)
|
||||
#define CONFIG_HAS_ETH0
|
||||
#define CONFIG_HAS_ETH1
|
||||
#define CONFIG_HAS_ETH2
|
||||
#define CONFIG_HAS_ETH3
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_LOADADDR a00000
|
||||
#define CONFIG_HOSTNAME mpc8360erdk
|
||||
#define CONFIG_BOOTFILE "uImage"
|
||||
|
||||
#define CONFIG_ROOTPATH "/nfsroot/"
|
||||
|
||||
#define CONFIG_BOOTDELAY 2 /* -1 disables auto-boot */
|
||||
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"loadaddr=a00000\0" \
|
||||
"fdtaddr=900000\0" \
|
||||
"fdtfile=mpc836x_rdk.dtb\0" \
|
||||
"fsfile=fs\0" \
|
||||
"ubootfile=u-boot.bin\0" \
|
||||
"mtdparts=mtdparts=60000000.nand-flash:4096k(kernel),128k(dtb),"\
|
||||
"-(rootfs)\0" \
|
||||
"setbootargs=setenv bootargs console=$consoledev,$baudrate " \
|
||||
"$mtdparts panic=1\0" \
|
||||
"adddhcpargs=setenv bootargs $bootargs ip=on\0" \
|
||||
"addnfsargs=setenv bootargs $bootargs ip=$ipaddr:$serverip:" \
|
||||
"$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"root=/dev/nfs rw nfsroot=$serverip:$rootpath\0" \
|
||||
"addnandargs=setenv bootargs $bootargs root=/dev/mtdblock3 " \
|
||||
"rootfstype=jffs2 rw\0" \
|
||||
"tftp_get_uboot=tftp 100000 $ubootfile\0" \
|
||||
"tftp_get_kernel=tftp $loadaddr $bootfile\0" \
|
||||
"tftp_get_dtb=tftp $fdtaddr $fdtfile\0" \
|
||||
"tftp_get_fs=tftp c00000 $fsfile\0" \
|
||||
"nand_erase_kernel=nand erase 0 400000\0" \
|
||||
"nand_erase_dtb=nand erase 400000 20000\0" \
|
||||
"nand_erase_fs=nand erase 420000 3be0000\0" \
|
||||
"nand_write_kernel=nand write.jffs2 $loadaddr 0 400000\0" \
|
||||
"nand_write_dtb=nand write.jffs2 $fdtaddr 400000 20000\0" \
|
||||
"nand_write_fs=nand write.jffs2 c00000 420000 $filesize\0" \
|
||||
"nand_read_kernel=nand read.jffs2 $loadaddr 0 400000\0" \
|
||||
"nand_read_dtb=nand read.jffs2 $fdtaddr 400000 20000\0" \
|
||||
"nor_reflash=protect off ff800000 ff87ffff ; " \
|
||||
"erase ff800000 ff87ffff ; " \
|
||||
"cp.b 100000 ff800000 $filesize\0" \
|
||||
"nand_reflash_kernel=run tftp_get_kernel nand_erase_kernel " \
|
||||
"nand_write_kernel\0" \
|
||||
"nand_reflash_dtb=run tftp_get_dtb nand_erase_dtb nand_write_dtb\0"\
|
||||
"nand_reflash_fs=run tftp_get_fs nand_erase_fs nand_write_fs\0" \
|
||||
"nand_reflash=run nand_reflash_kernel nand_reflash_dtb " \
|
||||
"nand_reflash_fs\0" \
|
||||
"boot_m=bootm $loadaddr - $fdtaddr\0" \
|
||||
"dhcpboot=dhcp ; run setbootargs adddhcpargs tftp_get_dtb boot_m\0"\
|
||||
"nfsboot=run setbootargs addnfsargs tftp_get_kernel tftp_get_dtb "\
|
||||
"boot_m\0" \
|
||||
"nandboot=run setbootargs addnandargs nand_read_kernel nand_read_dtb "\
|
||||
"boot_m\0" \
|
||||
""
|
||||
|
||||
#define CONFIG_BOOTCOMMAND "run dhcpboot"
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Reference in New Issue
Block a user