Merge tag 'xilinx-for-v2025.01-rc3-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

AMD/Xilinx changes for v2025.01-rc3:

- microblaze:
  - Disable JFFS2
- fpga:
  - pass compatible flag to fpga_load()
- zynqmp:
  - SOM RTC fix
  - SC(system controller) PMW polarity fix
  - Fix ram_top calculation with introducing XILINX_MINI
  - Fix RPU release command
- versal:
  - Enable capsule update
  - Enable soft reset and Micron octal flashes
- xilinx:
  - Align Kconfig regarding SPI_STACKED_PARALLEL
- bootcount:
  - Add new zynqmp driver

MAINTAINERS

@@ -860,6 +860,7 @@ M:	Michal Simek <michal.simek@amd.com>
 S:	Maintained
 T:	git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
 F:	arch/arm/mach-zynqmp/
+F:	drivers/bootcount/bootcount_zynqmp.c
 F:	drivers/clk/clk_zynqmp.c
 F:	driver/firmware/firmware-zynqmp.c
 F:	drivers/fpga/zynqpl.c

arch/arm/dts/zynqmp-sc-revB.dts

@@ -3,7 +3,7 @@
  * dts file for Xilinx ZynqMP Generic System Controller
  *
  * (C) Copyright 2021 - 2022, Xilinx, Inc.
- * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ * (C) Copyright 2022 - 2024, Advanced Micro Devices, Inc.
  *
  * Michal Simek <michal.simek@amd.com>
  */
@@ -80,7 +80,7 @@
 	pwm-fan {
 		compatible = "pwm-fan";
 		status = "okay";
-		pwms = <&ttc0 2 40000 1>;
+		pwms = <&ttc0 2 40000 0>;
 	};
 };
 

arch/arm/dts/zynqmp-sm-k26-revA.dts

@@ -387,6 +387,7 @@
 
 &rtc {
 	status = "okay";
+	calibration = <0x7fff>;
 };
 
 &lpd_dma_chan1 {

arch/arm/mach-zynqmp/include/mach/hardware.h

@@ -188,6 +188,8 @@ struct pmu_regs {
 	u32 gen_storage4; /* 0x40 */
 	u32 reserved1[1];
 	u32 gen_storage6; /* 0x48 */
+	u32 reserved2[3];
+	u32 pers_gen_storage2; /* 0x58 */
 };
 
 #define pmu_base ((struct pmu_regs *)ZYNQMP_PMU_BASEADDR)

arch/arm/mach-zynqmp/mp.c

@@ -352,7 +352,7 @@ int cpu_release(u32 nr, int argc, char *const argv[])
 		 */
 		flush_dcache_all();
 
-		if (!strncmp(argv[1], "lockstep", 8)) {
+		if (!strcmp(argv[1], "lockstep") || !strcmp(argv[1], "0")) {
 			if (nr != ZYNQMP_CORE_RPU0) {
 				printf("Lockstep mode should run on ZYNQMP_CORE_RPU0\n");
 				return 1;
@@ -369,7 +369,7 @@ int cpu_release(u32 nr, int argc, char *const argv[])
 			dcache_enable();
 			set_r5_halt_mode(nr, RELEASE, LOCK);
 			mark_r5_used(nr, LOCK);
-		} else if (!strncmp(argv[1], "split", 5)) {
+		} else if (!strcmp(argv[1], "split") || !strcmp(argv[1], "1")) {
 			printf("R5 split mode\n");
 			set_r5_reset(nr, SPLIT);
 			set_r5_tcm_mode(SPLIT);

board/xilinx/Kconfig

@@ -40,6 +40,15 @@ config XILINX_PS_INIT_FILE
 
 endif
 
+config XILINX_MINI
+	bool "Mini configuration"
+	depends on ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2
+	help
+	  This option disables features which are not needed for Mini U-Boot
+	  configurations. Mini U-Boot is running in EL3 mostly on size contrained
+	  systems. It's purpose is to program non volatile memories or running
+	  initial memory tests.
+
 config XILINX_OF_BOARD_DTB_ADDR
 	hex "Default DTB pickup address"
 	default 0x1000 if ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2

board/xilinx/common/board.c

@@ -19,6 +19,7 @@
 #include <i2c.h>
 #include <linux/sizes.h>
 #include <malloc.h>
+#include <memtop.h>
 #include <mtd_node.h>
 #include "board.h"
 #include <dm.h>
@@ -676,3 +677,31 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 	return 0;
 }
 #endif
+
+#ifndef CONFIG_XILINX_MINI
+
+#ifndef MMU_SECTION_SIZE
+#define MMU_SECTION_SIZE        (1 * 1024 * 1024)
+#endif
+
+phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
+{
+	phys_size_t size;
+	phys_addr_t reg;
+
+	if (!total_size)
+		return gd->ram_top;
+
+	if (!IS_ALIGNED((ulong)gd->fdt_blob, 0x8))
+		panic("Not 64bit aligned DT location: %p\n", gd->fdt_blob);
+
+	size = ALIGN(CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE);
+	reg = get_mem_top(gd->ram_base, gd->ram_size, size,
+			  (void *)gd->fdt_blob);
+	if (!reg)
+		reg = gd->ram_top - size;
+
+	return reg + size;
+}
+
+#endif

board/xilinx/versal/board.c

@@ -12,12 +12,15 @@
 #include <env_internal.h>
 #include <log.h>
 #include <malloc.h>
+#include <memalign.h>
+#include <mmc.h>
 #include <time.h>
 #include <asm/cache.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/sys_proto.h>
+#include <linux/sizes.h>
 #include <dm/device.h>
 #include <dm/uclass.h>
 #include <versalpl.h>
@@ -301,9 +304,11 @@ int dram_init(void)
 	return 0;
 }
 
+#if !CONFIG_IS_ENABLED(SYSRESET)
 void reset_cpu(void)
 {
 }
+#endif
 
 #if defined(CONFIG_ENV_IS_NOWHERE)
 enum env_location env_get_location(enum env_operation op, int prio)
@@ -336,3 +341,41 @@ enum env_location env_get_location(enum env_operation op, int prio)
 	}
 }
 #endif
+
+#if defined(CONFIG_SET_DFU_ALT_INFO)
+
+#define DFU_ALT_BUF_LEN		SZ_1K
+
+void set_dfu_alt_info(char *interface, char *devstr)
+{
+	int bootseq = 0, len = 0;
+	u32 bootmode = versal_get_bootmode();
+
+	ALLOC_CACHE_ALIGN_BUFFER(char, buf, DFU_ALT_BUF_LEN);
+
+	if (env_get("dfu_alt_info"))
+		return;
+
+	memset(buf, 0, sizeof(buf));
+
+	switch (bootmode) {
+	case EMMC_MODE:
+	case SD_MODE:
+	case SD1_LSHFT_MODE:
+	case SD_MODE1:
+		bootseq = mmc_get_env_dev();
+
+		len += snprintf(buf + len, DFU_ALT_BUF_LEN, "mmc %d=boot",
+			       bootseq);
+
+		len += snprintf(buf + len, DFU_ALT_BUF_LEN, ".bin fat %d 1",
+			       bootseq);
+		break;
+	default:
+		return;
+	}
+
+	env_set("dfu_alt_info", buf);
+	puts("DFU alt info setting: done\n");
+}
+#endif

board/xilinx/zynqmp/zynqmp_kria.env

@@ -77,6 +77,7 @@ tpm_kv260=if test ${card1_rev} = A -o ${card1_rev} = B -o ${card1_rev} = Y -o ${
 tpm_kd240=if test ${card1_rev} = A; then run tpm_reset; fi
 
 board_setup=\
+rtc dev 0; \
 zynqmp mmio_write 0xFFCA0010 0xfff 0; \
 if test ${card1_name} = SCK-KV-G; then run kv260_setup; run tpm_kv260; fi;\
 if test ${card1_name} = SCK-KR-G; then run kr260_setup; run tpm_reset; fi;\

boot/image-board.c

@@ -624,9 +624,10 @@ int boot_get_fpga(struct bootm_headers *images)
 	void *buf;
 	int conf_noffset;
 	int fit_img_result;
-	const char *uname, *name;
+	const char *uname, *name, *compatible;
 	int err;
 	int devnum = 0; /* TODO support multi fpga platforms */
+	int flags = 0;
 
 	if (!IS_ENABLED(CONFIG_FPGA))
 		return -ENOSYS;
@@ -674,20 +675,29 @@ int boot_get_fpga(struct bootm_headers *images)
 			return fit_img_result;
 		}
 
+		conf_noffset = fit_image_get_node(buf, uname);
+		compatible = fdt_getprop(buf, conf_noffset, "compatible", NULL);
+		if (!compatible) {
+			printf("'fpga' image without 'compatible' property\n");
+		} else {
+			if (CONFIG_IS_ENABLED(FPGA_LOAD_SECURE))
+				flags = fpga_compatible2flag(devnum, compatible);
+		}
+
 		if (!fpga_is_partial_data(devnum, img_len)) {
 			name = "full";
 			err = fpga_loadbitstream(devnum, (char *)img_data,
 						 img_len, BIT_FULL);
 			if (err)
 				err = fpga_load(devnum, (const void *)img_data,
-						img_len, BIT_FULL, 0);
+						img_len, BIT_FULL, flags);
 		} else {
 			name = "partial";
 			err = fpga_loadbitstream(devnum, (char *)img_data,
 						 img_len, BIT_PARTIAL);
 			if (err)
 				err = fpga_load(devnum, (const void *)img_data,
-						img_len, BIT_PARTIAL, 0);
+						img_len, BIT_PARTIAL, flags);
 		}
 
 		if (err)

common/Makefile

@@ -7,6 +7,7 @@
 ifndef CONFIG_XPL_BUILD
 obj-y += init/
 obj-y += main.o
+obj-y += memtop.o
 obj-y += exports.o
 obj-y += cli_getch.o cli_simple.o cli_readline.o
 obj-$(CONFIG_HUSH_OLD_PARSER) += cli_hush.o

common/memtop.c

@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+#include <fdt_support.h>
+#include <fdtdec.h>
+#include <memtop.h>
+
+#include <asm/types.h>
+
+#define MEM_RGN_COUNT	16
+
+struct region {
+	phys_addr_t base;
+	phys_size_t size;
+};
+
+struct mem_region {
+	struct region rgn[MEM_RGN_COUNT];
+	uint count;
+};
+
+static void add_mem_region(struct mem_region *mem_rgn, phys_addr_t base,
+			   phys_size_t size)
+{
+	long i;
+
+	for (i = mem_rgn->count; i >= 0; i--) {
+		if (i && base < mem_rgn->rgn[i - 1].base) {
+			mem_rgn->rgn[i] = mem_rgn->rgn[i - 1];
+		} else {
+			mem_rgn->rgn[i].base = base;
+			mem_rgn->rgn[i].size = size;
+			break;
+		}
+	}
+
+	mem_rgn->count++;
+}
+
+static void mem_regions_init(struct mem_region *mem)
+{
+	uint i;
+
+	mem->count = 0;
+	for (i = 0; i < MEM_RGN_COUNT; i++) {
+		mem->rgn[i].base = 0;
+		mem->rgn[i].size = 0;
+	}
+}
+
+static int fdt_add_reserved_regions(struct mem_region *free_mem,
+				    struct mem_region *reserved_mem,
+				    void *fdt_blob)
+{
+	u64 addr, size;
+	int i, total, ret;
+	int nodeoffset, subnode;
+	struct fdt_resource res;
+
+	if (fdt_check_header(fdt_blob) != 0)
+		return -1;
+
+	/* process memreserve sections */
+	total = fdt_num_mem_rsv(fdt_blob);
+	assert_noisy(total < MEM_RGN_COUNT);
+	for (i = 0; i < total; i++) {
+		if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0)
+			continue;
+		add_mem_region(reserved_mem, addr, size);
+	}
+
+	i = 0;
+	/* process reserved-memory */
+	nodeoffset = fdt_subnode_offset(fdt_blob, 0, "reserved-memory");
+	if (nodeoffset >= 0) {
+		subnode = fdt_first_subnode(fdt_blob, nodeoffset);
+		while (subnode >= 0) {
+			/* check if this subnode has a reg property */
+			ret = fdt_get_resource(fdt_blob, subnode, "reg", 0,
+					       &res);
+			if (!ret && fdtdec_get_is_enabled(fdt_blob, subnode)) {
+				addr = res.start;
+				size = res.end - res.start + 1;
+				assert_noisy(i < MEM_RGN_COUNT);
+				add_mem_region(reserved_mem, addr, size);
+			}
+
+			subnode = fdt_next_subnode(fdt_blob, subnode);
+			++i;
+		}
+	}
+
+	return 0;
+}
+
+static long addrs_overlap(phys_addr_t base1, phys_size_t size1,
+			  phys_addr_t base2, phys_size_t size2)
+{
+	const phys_addr_t base1_end = base1 + size1 - 1;
+	const phys_addr_t base2_end = base2 + size2 - 1;
+
+	return ((base1 <= base2_end) && (base2 <= base1_end));
+}
+
+static long region_overlap_check(struct mem_region *mem_rgn, phys_addr_t base,
+				 phys_size_t size)
+{
+	unsigned long i;
+	struct region *rgn = mem_rgn->rgn;
+
+	for (i = 0; i < mem_rgn->count; i++) {
+		phys_addr_t rgnbase = rgn[i].base;
+		phys_size_t rgnsize = rgn[i].size;
+
+		if (addrs_overlap(base, size, rgnbase, rgnsize))
+			break;
+	}
+
+	return (i < mem_rgn->count) ? i : -1;
+}
+
+static int find_ram_top(struct mem_region *free_mem,
+			struct mem_region *reserved_mem, phys_size_t size)
+{
+	long i, rgn;
+	phys_addr_t base = 0;
+	phys_addr_t res_base;
+
+	for (i = free_mem->count - 1; i >= 0; i--) {
+		phys_addr_t rgnbase = free_mem->rgn[i].base;
+		phys_size_t rgnsize = free_mem->rgn[i].size;
+
+		if (rgnsize < size)
+			continue;
+
+		base = rgnbase + rgnsize - size;
+		while (base && rgnbase <= base) {
+			rgn = region_overlap_check(reserved_mem, base, size);
+			if (rgn < 0)
+				return base;
+
+			res_base = reserved_mem->rgn[rgn].base;
+			if (res_base < size)
+				break;
+			base = res_base - size;
+		}
+	}
+
+	return 0;
+}
+
+phys_addr_t get_mem_top(phys_addr_t ram_start, phys_size_t ram_size,
+			phys_size_t size, void *fdt)
+{
+	int i;
+	struct mem_region free_mem;
+	struct mem_region reserved_mem;
+
+	mem_regions_init(&free_mem);
+	mem_regions_init(&reserved_mem);
+
+	add_mem_region(&free_mem, ram_start, ram_size);
+
+	i = fdt_add_reserved_regions(&free_mem, &reserved_mem, fdt);
+	if (i < 0)
+		return 0;
+
+	return find_ram_top(&free_mem, &reserved_mem, size);
+}

configs/amd_versal2_mini_defconfig

@@ -15,6 +15,7 @@ CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
 CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_DEBUG_UART_BASE=0xf1920000
 CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_XILINX_MINI=y
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_DEBUG_UART=y

configs/amd_versal2_mini_emmc_defconfig

@@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
 CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_DEBUG_UART_BASE=0xf1920000
 CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_XILINX_MINI=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_DEBUG_UART=y
 # CONFIG_EXPERT is not set

configs/amd_versal2_mini_ospi_defconfig

@@ -15,6 +15,7 @@ CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
 CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_DEBUG_UART_BASE=0xf1920000
 CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_XILINX_MINI=y
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_DEBUG_UART=y

configs/amd_versal2_mini_qspi_defconfig

@@ -15,6 +15,7 @@ CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
 CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_DEBUG_UART_BASE=0xf1920000
 CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_XILINX_MINI=y
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_DEBUG_UART=y

configs/microblaze-generic_defconfig

@@ -47,7 +47,6 @@ CONFIG_CMD_SAVES=y
 CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_JFFS2=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y

configs/xilinx_versal_mini_defconfig

@@ -12,6 +12,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe0000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-mini"
 CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_SYS_MEMTEST_START=0x00000000

configs/xilinx_versal_mini_emmc0_defconfig

@@ -12,6 +12,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-mini-emmc0"
 CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
 # CONFIG_PSCI_RESET is not set
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y

configs/xilinx_versal_mini_emmc1_defconfig

@@ -12,6 +12,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-mini-emmc1"
 CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
 # CONFIG_PSCI_RESET is not set
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y

configs/xilinx_versal_mini_ospi_defconfig

@@ -13,6 +13,7 @@ CONFIG_ENV_SIZE=0x80
 # CONFIG_DM_GPIO is not set
 CONFIG_DEFAULT_DEVICE_TREE="versal-mini-ospi-single"
 CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 CONFIG_VERSAL_NO_DDR=y
 # CONFIG_PSCI_RESET is not set

configs/xilinx_versal_mini_qspi_defconfig

@@ -11,6 +11,7 @@ CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-mini-qspi-single"
 CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 CONFIG_VERSAL_NO_DDR=y
 # CONFIG_PSCI_RESET is not set

configs/xilinx_versal_net_mini_defconfig

@@ -14,6 +14,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xBBF10000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-net-mini"
 CONFIG_SYS_LOAD_ADDR=0xBBF00000
+CONFIG_XILINX_MINI=y
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_SYS_MEMTEST_START=0x00000000

configs/xilinx_versal_net_mini_emmc_defconfig

@@ -10,6 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-net-mini-emmc"
 CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
 # CONFIG_PSCI_RESET is not set
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y

configs/xilinx_versal_net_mini_ospi_defconfig

@@ -13,6 +13,7 @@ CONFIG_ENV_SIZE=0x80
 # CONFIG_DM_GPIO is not set
 CONFIG_DEFAULT_DEVICE_TREE="versal-net-mini-ospi-single"
 CONFIG_SYS_LOAD_ADDR=0xBBF80000
+CONFIG_XILINX_MINI=y
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_LTO=y

configs/xilinx_versal_net_mini_qspi_defconfig

@@ -11,6 +11,7 @@ CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-net-mini-qspi-single"
 CONFIG_SYS_LOAD_ADDR=0xBBF80000
+CONFIG_XILINX_MINI=y
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_LTO=y

configs/xilinx_versal_net_virt_defconfig

@@ -133,6 +133,7 @@ CONFIG_CADENCE_QSPI=y
 CONFIG_CADENCE_OSPI_VERSAL=y
 CONFIG_ZYNQ_SPI=y
 CONFIG_ZYNQMP_GQSPI=y
+CONFIG_SPI_STACKED_PARALLEL=y
 CONFIG_TPM2_TIS_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB_GADGET=y

configs/xilinx_versal_virt_defconfig

@@ -4,6 +4,7 @@ CONFIG_POSITION_INDEPENDENT=y
 CONFIG_SYS_INIT_SP_BSS_OFFSET=1572864
 CONFIG_ARCH_VERSAL=y
 CONFIG_TEXT_BASE=0x8000000
+CONFIG_SYS_MALLOC_LEN=0x4000000
 CONFIG_SYS_MALLOC_F_LEN=0x100000
 CONFIG_NR_DRAM_BANKS=36
 CONFIG_SF_DEFAULT_SPEED=30000000
@@ -18,6 +19,10 @@ CONFIG_DEFINE_TCM_OCM_MMAP=y
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000
 CONFIG_REMAKE_ELF=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_ON_DISK_EARLY=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 CONFIG_EFI_HTTP_BOOT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -76,6 +81,7 @@ CONFIG_TFTP_BLOCKSIZE=4096
 CONFIG_SIMPLE_PM_BUS=y
 CONFIG_CLK_VERSAL=y
 CONFIG_DFU_TIMEOUT=y
+CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1800000
 CONFIG_ARM_FFA_TRANSPORT=y
@@ -99,11 +105,14 @@ CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_ZYNQ_SDHCI_MIN_FREQ=100000
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SOFT_RESET=y
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MT35XU=y
 CONFIG_SPI_FLASH_SST=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
@@ -136,6 +145,9 @@ CONFIG_CQSPI_REF_CLK=200000000
 CONFIG_CADENCE_OSPI_VERSAL=y
 CONFIG_ZYNQ_SPI=y
 CONFIG_ZYNQMP_GQSPI=y
+CONFIG_SPI_STACKED_PARALLEL=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
 CONFIG_TPM2_TIS_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB_GADGET=y

configs/xilinx_zynq_virt_defconfig

@@ -146,6 +146,7 @@ CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_SERIAL=y
 CONFIG_ZYNQ_SPI=y
 CONFIG_ZYNQ_QSPI=y
+CONFIG_SPI_STACKED_PARALLEL=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_ULPI_VIEWPORT=y

configs/xilinx_zynqmp_kria_defconfig

@@ -187,7 +187,6 @@ CONFIG_DM_PWM=y
 CONFIG_PWM_CADENCE_TTC=y
 CONFIG_RESET_ZYNQMP=y
 CONFIG_DM_RTC=y
-CONFIG_RTC_EMULATION=y
 CONFIG_RTC_ZYNQMP=y
 CONFIG_SCSI=y
 CONFIG_ARM_DCC=y

configs/xilinx_zynqmp_mini_defconfig

@@ -9,6 +9,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe0000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini"
 CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000

configs/xilinx_zynqmp_mini_emmc0_defconfig

@@ -15,6 +15,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x600
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_SPL=y
+CONFIG_XILINX_MINI=y
 CONFIG_REMAKE_ELF=y
 # CONFIG_MP is not set
 # CONFIG_EFI_LOADER is not set

configs/xilinx_zynqmp_mini_emmc1_defconfig

@@ -15,6 +15,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x600
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_SPL=y
+CONFIG_XILINX_MINI=y
 CONFIG_REMAKE_ELF=y
 # CONFIG_MP is not set
 # CONFIG_EFI_LOADER is not set

configs/xilinx_zynqmp_mini_nand_defconfig

@@ -10,6 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand"
 CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
 CONFIG_REMAKE_ELF=y
 # CONFIG_MP is not set
 # CONFIG_EFI_LOADER is not set

configs/xilinx_zynqmp_mini_nand_single_defconfig

@@ -10,6 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand"
 CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
 CONFIG_REMAKE_ELF=y
 # CONFIG_MP is not set
 # CONFIG_EFI_LOADER is not set

configs/xilinx_zynqmp_mini_qspi_defconfig

@@ -15,6 +15,7 @@ CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_SPL=y
 # CONFIG_SPL_FS_FAT is not set
 # CONFIG_SPL_LIBDISK_SUPPORT is not set
+CONFIG_XILINX_MINI=y
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 CONFIG_ZYNQMP_NO_DDR=y
 # CONFIG_PSCI_RESET is not set

configs/xilinx_zynqmp_virt_defconfig

@@ -210,6 +210,7 @@ CONFIG_SOC_XILINX_ZYNQMP=y
 CONFIG_SPI=y
 CONFIG_ZYNQ_SPI=y
 CONFIG_ZYNQMP_GQSPI=y
+CONFIG_SPI_STACKED_PARALLEL=y
 CONFIG_SYSRESET=y
 CONFIG_SYSRESET_CMD_POWEROFF=y
 CONFIG_SYSRESET_PSCI=y

drivers/bootcount/Kconfig

@@ -164,6 +164,13 @@ config DM_BOOTCOUNT_SYSCON
 
 	  Accessing the backend is done using the regmap interface.
 
+config DM_BOOTCOUNT_ZYNQMP
+	bool "Support ZynqMP PMUFW as a backing store for bootcount"
+	depends on ARCH_ZYNQMP
+	help
+	  Enable support for the bootcount API by utilising the Persistent
+	  Global General Storage Register 2 of the PMU.
+
 endmenu
 
 endif

drivers/bootcount/Makefile

@@ -16,3 +16,4 @@ obj-$(CONFIG_DM_BOOTCOUNT_I2C_EEPROM)	+= i2c-eeprom.o
 obj-$(CONFIG_DM_BOOTCOUNT_I2C)	+= bootcount_dm_i2c.o
 obj-$(CONFIG_DM_BOOTCOUNT_SPI_FLASH)	+= spi-flash.o
 obj-$(CONFIG_DM_BOOTCOUNT_SYSCON) += bootcount_syscon.o
+obj-$(CONFIG_DM_BOOTCOUNT_ZYNQMP)	+= bootcount_zynqmp.o

drivers/bootcount/bootcount_zynqmp.c

@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+// SPDX-FileCopyrightText: 2024 CERN (home.cern)
+
+#include <bootcount.h>
+#include <dm.h>
+#include <stdio.h>
+#include <zynqmp_firmware.h>
+#include <asm/arch/hardware.h>
+#include <dm/platdata.h>
+
+static int bootcount_zynqmp_set(struct udevice *dev, const u32 val)
+{
+	int ret;
+
+	ret = zynqmp_mmio_write((ulong)&pmu_base->pers_gen_storage2, 0xFF, val);
+	if (ret)
+		pr_info("%s write fail\n", __func__);
+
+	return ret;
+}
+
+static int bootcount_zynqmp_get(struct udevice *dev, u32 *val)
+{
+	int ret;
+
+	*val = 0;
+	ret = zynqmp_mmio_read((ulong)&pmu_base->pers_gen_storage2, val);
+	if (ret)
+		pr_info("%s read fail\n", __func__);
+
+	return ret;
+}
+
+U_BOOT_DRVINFO(bootcount_zynqmp) = {
+	.name = "bootcount_zynqmp",
+};
+
+static const struct bootcount_ops bootcount_zynqmp_ops = {
+	.get = bootcount_zynqmp_get,
+	.set = bootcount_zynqmp_set,
+};
+
+U_BOOT_DRIVER(bootcount_zynqmp) = {
+	.name = "bootcount_zynqmp",
+	.id = UCLASS_BOOTCOUNT,
+	.ops = &bootcount_zynqmp_ops,
+};

drivers/spi/cadence_qspi.c

@@ -251,13 +251,6 @@ static int cadence_spi_probe(struct udevice *bus)
 
 	priv->wr_delay = 50 * DIV_ROUND_UP(NSEC_PER_SEC, priv->ref_clk_hz);
 
-	/* Versal and Versal-NET use spi calibration to set read delay */
-	if (CONFIG_IS_ENABLED(ARCH_VERSAL) ||
-	    CONFIG_IS_ENABLED(ARCH_VERSAL_NET) ||
-	    CONFIG_IS_ENABLED(ARCH_VERSAL2))
-		if (priv->read_delay >= 0)
-			priv->read_delay = -1;
-
 	/* Reset ospi flash device */
 	return cadence_qspi_versal_flash_reset(bus);
 }

include/configs/microblaze-generic.h

@@ -82,7 +82,7 @@
 	"nor0=flash-0\0"\
 	"mtdparts=mtdparts=flash-0:"\
 	"256k(u-boot),256k(env),3m(kernel),"\
-	"1m(romfs),1m(cramfs),-(jffs2)\0"\
+	"1m(romfs),1m(cramfs),-(fs)\0"\
 	"nc=setenv stdout nc;"\
 	"setenv stdin nc\0" \
 	"serial=setenv stdout serial;"\

include/memtop.h

@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/**
+ * get_mem_top() - Compute the value of ram_top
+ * @ram_start:	Start of RAM
+ * @ram_size:	RAM size
+ * @size:	Minimum RAM size requested
+ * @fdt:	FDT blob
+ *
+ * The function computes the top address of RAM memory that can be
+ * used by U-Boot. This is being done by going through the list of
+ * reserved memory regions specified in the devicetree blob passed
+ * to the function. The logic used here is derived from the lmb
+ * allocation function.
+ *
+ * Return: address of ram top on success, 0 on failure
+ */
+phys_addr_t get_mem_top(phys_addr_t ram_start, phys_size_t ram_size,
+			phys_size_t size, void *fdt);