treewide: convert devfdt_get_addr() to dev_read_addr()

When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To generate this commit, I used coccinelle excluding drivers/core/,
include/dm/, and test/

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  expression dev;
  @@
  -devfdt_get_addr(dev)
  +dev_read_addr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

drivers/spi/altera_spi.c

@@ -173,7 +173,7 @@ static int altera_spi_ofdata_to_platdata(struct udevice *bus)
 {
 	struct altera_spi_platdata *plat = dev_get_platdata(bus);
 
-	plat->regs = map_physmem(devfdt_get_addr(bus),
+	plat->regs = map_physmem(dev_read_addr(bus),
 				 sizeof(struct altera_spi_regs),
 				 MAP_NOCACHE);
 

drivers/spi/atcspi200_spi.c

@@ -378,7 +378,7 @@ static int atcspi200_ofdata_to_platadata(struct udevice *bus)
 	const void *blob = gd->fdt_blob;
 	int node = dev_of_offset(bus);
 
-	ns->regs = map_physmem(devfdt_get_addr(bus),
+	ns->regs = map_physmem(dev_read_addr(bus),
 				 sizeof(struct atcspi200_spi_regs),
 				 MAP_NOCACHE);
 	if (!ns->regs) {

drivers/spi/ath79_spi.c

@@ -178,7 +178,7 @@ static int ath79_spi_probe(struct udevice *bus)
 	struct ath79_spi_priv *priv = dev_get_priv(bus);
 	fdt_addr_t addr;
 
-	addr = devfdt_get_addr(bus);
+	addr = dev_read_addr(bus);
 	if (addr == FDT_ADDR_T_NONE)
 		return -EINVAL;
 

drivers/spi/cf_spi.c

@@ -392,7 +392,7 @@ static int coldfire_dspi_ofdata_to_platdata(struct udevice *bus)
 	int node = dev_of_offset(bus);
 	int *ctar, len;
 
-	addr = devfdt_get_addr(bus);
+	addr = dev_read_addr(bus);
 	if (addr == FDT_ADDR_T_NONE)
 		return -ENOMEM;
 

drivers/spi/davinci_spi.c

@@ -396,7 +396,7 @@ static int davinci_ofdata_to_platadata(struct udevice *bus)
 	struct davinci_spi_platdata *plat = bus->platdata;
 	fdt_addr_t addr;
 
-	addr = devfdt_get_addr(bus);
+	addr = dev_read_addr(bus);
 	if (addr == FDT_ADDR_T_NONE)
 		return -EINVAL;
 

drivers/spi/fsl_dspi.c

@@ -534,7 +534,7 @@ static int fsl_dspi_ofdata_to_platdata(struct udevice *bus)
 	plat->num_chipselect =
 		fdtdec_get_int(blob, node, "num-cs", FSL_DSPI_MAX_CHIPSELECT);
 
-	addr = devfdt_get_addr(bus);
+	addr = dev_read_addr(bus);
 	if (addr == FDT_ADDR_T_NONE) {
 		debug("DSPI: Can't get base address or size\n");
 		return -ENOMEM;

drivers/spi/mxc_spi.c

@@ -537,7 +537,7 @@ static int mxc_spi_probe(struct udevice *bus)
 		}
 	}
 
-	mxcs->base = devfdt_get_addr(bus);
+	mxcs->base = dev_read_addr(bus);
 	if (mxcs->base == FDT_ADDR_T_NONE)
 		return -ENODEV;
 

drivers/spi/omap3_spi.c

@@ -488,7 +488,7 @@ static int omap3_spi_probe(struct udevice *dev)
 	struct omap2_mcspi_platform_config* data =
 		(struct omap2_mcspi_platform_config*)dev_get_driver_data(dev);
 
-	priv->regs = (struct mcspi *)(devfdt_get_addr(dev) + data->regs_offset);
+	priv->regs = (struct mcspi *)(dev_read_addr(dev) + data->regs_offset);
 	if (fdtdec_get_bool(blob, node, "ti,pindir-d0-out-d1-in"))
 		priv->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
 	else

drivers/spi/spi-sunxi.c

@@ -519,7 +519,7 @@ static int sun4i_spi_ofdata_to_platdata(struct udevice *bus)
 	struct sun4i_spi_platdata *plat = dev_get_platdata(bus);
 	int node = dev_of_offset(bus);
 
-	plat->base = devfdt_get_addr(bus);
+	plat->base = dev_read_addr(bus);
 	plat->variant = (struct sun4i_spi_variant *)dev_get_driver_data(bus);
 	plat->max_hz = fdtdec_get_int(gd->fdt_blob, node,
 				      "spi-max-frequency",

drivers/spi/tegra20_sflash.c

@@ -93,7 +93,7 @@ static int tegra20_sflash_ofdata_to_platdata(struct udevice *bus)
 	const void *blob = gd->fdt_blob;
 	int node = dev_of_offset(bus);
 
-	plat->base = devfdt_get_addr(bus);
+	plat->base = dev_read_addr(bus);
 	plat->periph_id = clock_decode_periph_id(bus);
 
 	if (plat->periph_id == PERIPH_ID_NONE) {

drivers/spi/tegra20_slink.c

@@ -99,7 +99,7 @@ static int tegra30_spi_ofdata_to_platdata(struct udevice *bus)
 	const void *blob = gd->fdt_blob;
 	int node = dev_of_offset(bus);
 
-	plat->base = devfdt_get_addr(bus);
+	plat->base = dev_read_addr(bus);
 	plat->periph_id = clock_decode_periph_id(bus);
 
 	if (plat->periph_id == PERIPH_ID_NONE) {

drivers/spi/ti_qspi.c

@@ -461,7 +461,7 @@ static int ti_qspi_ofdata_to_platdata(struct udevice *bus)
 	fdt_addr_t mmap_size;
 
 	priv->ctrl_mod_mmap = map_syscon_chipselects(bus);
-	priv->base = map_physmem(devfdt_get_addr(bus),
+	priv->base = map_physmem(dev_read_addr(bus),
 				 sizeof(struct ti_qspi_regs), MAP_NOCACHE);
 	mmap_addr = devfdt_get_addr_size_index(bus, 1, &mmap_size);
 	priv->memory_map = map_physmem(mmap_addr, mmap_size, MAP_NOCACHE);

drivers/spi/zynqmp_gqspi.c

@@ -181,10 +181,10 @@ static int zynqmp_qspi_ofdata_to_platdata(struct udevice *bus)
 
 	debug("%s\n", __func__);
 
-	plat->regs = (struct zynqmp_qspi_regs *)(devfdt_get_addr(bus) +
+	plat->regs = (struct zynqmp_qspi_regs *)(dev_read_addr(bus) +
 						 GQSPI_REG_OFFSET);
 	plat->dma_regs = (struct zynqmp_qspi_dma_regs *)
-			  (devfdt_get_addr(bus) + GQSPI_DMA_REG_OFFSET);
+			  (dev_read_addr(bus) + GQSPI_DMA_REG_OFFSET);
 
 	return 0;
 }