mirror of
https://xff.cz/git/u-boot/
synced 2025-09-27 13:31:16 +02:00
powerpc: ppc4xx: remove csb272, csb472 support
These have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tolunay Orkun <torkun@nextio.com>
This commit is contained in:
Masahiro Yamada
committed by
Tom Rini
Tom Rini
parent
0d2fc81133
commit
54a3f260fd
@@ -8,12 +8,6 @@ choice
|
|||||||
prompt "Target select"
|
prompt "Target select"
|
||||||
optional
|
optional
|
||||||
|
|
||||||
config TARGET_CSB272
|
|
||||||
bool "Support csb272"
|
|
||||||
|
|
||||||
config TARGET_CSB472
|
|
||||||
bool "Support csb472"
|
|
||||||
|
|
||||||
config TARGET_LWMON5
|
config TARGET_LWMON5
|
||||||
bool "Support lwmon5"
|
bool "Support lwmon5"
|
||||||
select SUPPORT_SPL
|
select SUPPORT_SPL
|
||||||
@@ -176,8 +170,6 @@ source "board/amcc/yosemite/Kconfig"
|
|||||||
source "board/amcc/yucca/Kconfig"
|
source "board/amcc/yucca/Kconfig"
|
||||||
source "board/avnet/fx12mm/Kconfig"
|
source "board/avnet/fx12mm/Kconfig"
|
||||||
source "board/avnet/v5fx30teval/Kconfig"
|
source "board/avnet/v5fx30teval/Kconfig"
|
||||||
source "board/csb272/Kconfig"
|
|
||||||
source "board/csb472/Kconfig"
|
|
||||||
source "board/esd/cpci2dp/Kconfig"
|
source "board/esd/cpci2dp/Kconfig"
|
||||||
source "board/esd/cpci405/Kconfig"
|
source "board/esd/cpci405/Kconfig"
|
||||||
source "board/esd/plu405/Kconfig"
|
source "board/esd/plu405/Kconfig"
|
||||||
|
|||||||
@@ -1,9 +0,0 @@
|
|||||||
if TARGET_CSB272
|
|
||||||
|
|
||||||
config SYS_BOARD
|
|
||||||
default "csb272"
|
|
||||||
|
|
||||||
config SYS_CONFIG_NAME
|
|
||||||
default "csb272"
|
|
||||||
|
|
||||||
endif
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
CSB272 BOARD
|
|
||||||
M: Tolunay Orkun <torkun@nextio.com>
|
|
||||||
S: Maintained
|
|
||||||
F: board/csb272/
|
|
||||||
F: include/configs/csb272.h
|
|
||||||
F: configs/csb272_defconfig
|
|
||||||
@@ -1,9 +0,0 @@
|
|||||||
#
|
|
||||||
# (C) Copyright 2000-2006
|
|
||||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
obj-y = csb272.o
|
|
||||||
obj-y += init.o
|
|
||||||
@@ -1,171 +0,0 @@
|
|||||||
/*
|
|
||||||
* (C) Copyright 2004
|
|
||||||
* Tolunay Orkun, Nextio Inc., torkun@nextio.com
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <asm/processor.h>
|
|
||||||
#include <i2c.h>
|
|
||||||
#include <miiphy.h>
|
|
||||||
#include <asm/ppc4xx-emac.h>
|
|
||||||
|
|
||||||
void sdram_init(void);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Configuration data for AMIS FS6377-01 Programmable 3-PLL Clock Generator
|
|
||||||
*
|
|
||||||
* CLKA output => Epson LCD Controller
|
|
||||||
* CLKB output => Not Connected
|
|
||||||
* CLKC output => Ethernet
|
|
||||||
* CLKD output => UART external clock
|
|
||||||
*
|
|
||||||
* Note: these values are obtained from device after init by micromonitor
|
|
||||||
*/
|
|
||||||
uchar pll_fs6377_regs[16] = {
|
|
||||||
0x28, 0xef, 0x53, 0x03, 0x4b, 0x80, 0x32, 0x80,
|
|
||||||
0x94, 0x32, 0x80, 0xd4, 0x56, 0xf6, 0xf6, 0xe0 };
|
|
||||||
|
|
||||||
/*
|
|
||||||
* pll_init: Initialize AMIS IC FS6377-01 PLL
|
|
||||||
*
|
|
||||||
* PLL supplies Epson LCD Clock, Ethernet Clock and UART external clock
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
int pll_init(void)
|
|
||||||
{
|
|
||||||
i2c_set_bus_num(0);
|
|
||||||
|
|
||||||
return i2c_write(CONFIG_SYS_I2C_PLL_ADDR, 0, 1,
|
|
||||||
(uchar *) pll_fs6377_regs, sizeof(pll_fs6377_regs));
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* board_early_init_f: do early board initialization
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
int board_early_init_f(void)
|
|
||||||
{
|
|
||||||
/* initialize PLL so UART, LCD, Ethernet clocked at correctly */
|
|
||||||
(void) get_clocks();
|
|
||||||
pll_init();
|
|
||||||
|
|
||||||
/*-------------------------------------------------------------------------+
|
|
||||||
| Interrupt controller setup for the Walnut board.
|
|
||||||
| Note: IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
||||||
| IRQ 16 405GP internally generated; active low; level sensitive
|
|
||||||
| IRQ 17-24 RESERVED
|
|
||||||
| IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
|
|
||||||
| IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
|
|
||||||
| IRQ 27 (EXT IRQ 2) Not Used
|
|
||||||
| IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
|
|
||||||
| IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
|
|
||||||
| IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
|
|
||||||
| IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
|
|
||||||
| Note for Walnut board:
|
|
||||||
| An interrupt taken for the FPGA (IRQ 25) indicates that either
|
|
||||||
| the Mouse, Keyboard, IRDA, or External Expansion caused the
|
|
||||||
| interrupt. The FPGA must be read to determine which device
|
|
||||||
| caused the interrupt. The default setting of the FPGA clears
|
|
||||||
|
|
|
||||||
+-------------------------------------------------------------------------*/
|
|
||||||
|
|
||||||
mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
||||||
mtdcr (UIC0ER, 0x00000000); /* disable all ints */
|
|
||||||
mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
|
|
||||||
mtdcr (UIC0PR, 0xFFFFFF83); /* set int polarities */
|
|
||||||
mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
|
|
||||||
mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
|
|
||||||
mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
||||||
|
|
||||||
mtebc (EBC0_CFG, 0xa8400000); /* EBC always driven */
|
|
||||||
|
|
||||||
return 0; /* success */
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* checkboard: identify/verify the board we are running
|
|
||||||
*
|
|
||||||
* Remark: we just assume it is correct board here!
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
int checkboard(void)
|
|
||||||
{
|
|
||||||
printf("BOARD: Cogent CSB272\n");
|
|
||||||
|
|
||||||
return 0; /* success */
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* initram: Determine the size of mounted DRAM
|
|
||||||
*
|
|
||||||
* Size is determined by reading SDRAM configuration registers as
|
|
||||||
* configured by initialization code
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
phys_size_t initdram (int board_type)
|
|
||||||
{
|
|
||||||
ulong tot_size;
|
|
||||||
ulong bank_size;
|
|
||||||
ulong tmp;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* ToDo: Move the asm init routine sdram_init() to this C file,
|
|
||||||
* or even better use some common ppc4xx code available
|
|
||||||
* in arch/powerpc/cpu/ppc4xx
|
|
||||||
*/
|
|
||||||
sdram_init();
|
|
||||||
|
|
||||||
tot_size = 0;
|
|
||||||
|
|
||||||
mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
|
|
||||||
tmp = mfdcr (SDRAM0_CFGDATA);
|
|
||||||
if (tmp & 0x00000001) {
|
|
||||||
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
||||||
tot_size += bank_size;
|
|
||||||
}
|
|
||||||
|
|
||||||
mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
|
|
||||||
tmp = mfdcr (SDRAM0_CFGDATA);
|
|
||||||
if (tmp & 0x00000001) {
|
|
||||||
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
||||||
tot_size += bank_size;
|
|
||||||
}
|
|
||||||
|
|
||||||
mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
|
|
||||||
tmp = mfdcr (SDRAM0_CFGDATA);
|
|
||||||
if (tmp & 0x00000001) {
|
|
||||||
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
||||||
tot_size += bank_size;
|
|
||||||
}
|
|
||||||
|
|
||||||
mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
|
|
||||||
tmp = mfdcr (SDRAM0_CFGDATA);
|
|
||||||
if (tmp & 0x00000001) {
|
|
||||||
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
||||||
tot_size += bank_size;
|
|
||||||
}
|
|
||||||
|
|
||||||
return tot_size;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* last_stage_init: final configurations (such as PHY etc)
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
int last_stage_init(void)
|
|
||||||
{
|
|
||||||
/* initialize the PHY */
|
|
||||||
miiphy_reset("ppc_4xx_eth0", CONFIG_PHY_ADDR);
|
|
||||||
|
|
||||||
/* AUTO neg */
|
|
||||||
miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, MII_BMCR,
|
|
||||||
BMCR_ANENABLE | BMCR_ANRESTART);
|
|
||||||
|
|
||||||
/* LEDs */
|
|
||||||
miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, MII_NWAYTEST, 0x0d08);
|
|
||||||
|
|
||||||
|
|
||||||
return 0; /* success */
|
|
||||||
}
|
|
||||||
@@ -1,196 +0,0 @@
|
|||||||
/*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0 IBM-pibs
|
|
||||||
*/
|
|
||||||
#include <config.h>
|
|
||||||
#include <asm/ppc4xx.h>
|
|
||||||
|
|
||||||
#include <ppc_asm.tmpl>
|
|
||||||
#include <ppc_defs.h>
|
|
||||||
|
|
||||||
#include <asm/cache.h>
|
|
||||||
#include <asm/mmu.h>
|
|
||||||
|
|
||||||
#define LI32(reg,val) \
|
|
||||||
addis reg,0,val@h;\
|
|
||||||
ori reg,reg,val@l
|
|
||||||
|
|
||||||
#define WDCR_EBC(reg,val) \
|
|
||||||
addi r4,0,reg;\
|
|
||||||
mtdcr EBC0_CFGADDR,r4;\
|
|
||||||
addis r4,0,val@h;\
|
|
||||||
ori r4,r4,val@l;\
|
|
||||||
mtdcr EBC0_CFGDATA,r4
|
|
||||||
|
|
||||||
#define WDCR_SDRAM(reg,val) \
|
|
||||||
addi r4,0,reg;\
|
|
||||||
mtdcr SDRAM0_CFGADDR,r4;\
|
|
||||||
addis r4,0,val@h;\
|
|
||||||
ori r4,r4,val@l;\
|
|
||||||
mtdcr SDRAM0_CFGDATA,r4
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* Function: ext_bus_cntlr_init
|
|
||||||
*
|
|
||||||
* Description: Configures EBC Controller and a few basic chip selects.
|
|
||||||
*
|
|
||||||
* CS0 is setup to get the Boot Flash out of the addresss range
|
|
||||||
* so that we may setup a stack. CS7 is setup so that we can
|
|
||||||
* access and reset the hardware watchdog.
|
|
||||||
*
|
|
||||||
* IMPORTANT: For pass1 this code must run from
|
|
||||||
* cache since you can not reliably change a peripheral banks
|
|
||||||
* timing register (pbxap) while running code from that bank.
|
|
||||||
* For ex., since we are running from ROM on bank 0, we can NOT
|
|
||||||
* execute the code that modifies bank 0 timings from ROM, so
|
|
||||||
* we run it from cache.
|
|
||||||
*
|
|
||||||
* Notes: Does NOT use the stack.
|
|
||||||
*****************************************************************************/
|
|
||||||
.section ".text"
|
|
||||||
.align 2
|
|
||||||
.globl ext_bus_cntlr_init
|
|
||||||
.type ext_bus_cntlr_init, @function
|
|
||||||
ext_bus_cntlr_init:
|
|
||||||
mflr r0
|
|
||||||
/********************************************************************
|
|
||||||
* Prefetch entire ext_bus_cntrl_init function into the icache.
|
|
||||||
* This is necessary because we are going to change the same CS we
|
|
||||||
* are executing from. Otherwise a CPU lockup may occur.
|
|
||||||
*******************************************************************/
|
|
||||||
bl ..getAddr
|
|
||||||
..getAddr:
|
|
||||||
mflr r3 /* get address of ..getAddr */
|
|
||||||
|
|
||||||
/* Calculate number of cache lines for this function */
|
|
||||||
addi r4, 0, (((.Lfe0 - ..getAddr) / CONFIG_SYS_CACHELINE_SIZE) + 2)
|
|
||||||
mtctr r4
|
|
||||||
..ebcloop:
|
|
||||||
icbt r0, r3 /* prefetch cache line for addr in r3*/
|
|
||||||
addi r3, r3, CONFIG_SYS_CACHELINE_SIZE /* move to next cache line */
|
|
||||||
bdnz ..ebcloop /* continue for $CTR cache lines */
|
|
||||||
|
|
||||||
/********************************************************************
|
|
||||||
* Delay to ensure all accesses to ROM are complete before changing
|
|
||||||
* bank 0 timings. 200usec should be enough.
|
|
||||||
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles.
|
|
||||||
*******************************************************************/
|
|
||||||
addis r3, 0, 0x0
|
|
||||||
ori r3, r3, 0xA000 /* wait 200us from reset */
|
|
||||||
mtctr r3
|
|
||||||
..spinlp:
|
|
||||||
bdnz ..spinlp /* spin loop */
|
|
||||||
|
|
||||||
/********************************************************************
|
|
||||||
* SETUP CPC0_CR0
|
|
||||||
*******************************************************************/
|
|
||||||
LI32(r4, 0x007000c0)
|
|
||||||
mtdcr CPC0_CR0, r4
|
|
||||||
|
|
||||||
/********************************************************************
|
|
||||||
* Setup CPC0_CR1: Change PCIINT signal to PerWE
|
|
||||||
*******************************************************************/
|
|
||||||
mfdcr r4, CPC0_CR1
|
|
||||||
ori r4, r4, 0x4000
|
|
||||||
mtdcr CPC0_CR1, r4
|
|
||||||
|
|
||||||
/********************************************************************
|
|
||||||
* Setup External Bus Controller (EBC).
|
|
||||||
*******************************************************************/
|
|
||||||
WDCR_EBC(EBC0_CFG, 0xd84c0000)
|
|
||||||
/********************************************************************
|
|
||||||
* Memory Bank 0 (Intel 28F128J3 Flash) initialization
|
|
||||||
*******************************************************************/
|
|
||||||
/*WDCR_EBC(PB1AP, 0x02869200)*/
|
|
||||||
WDCR_EBC(PB1AP, 0x07869200)
|
|
||||||
WDCR_EBC(PB0CR, 0xfe0bc000)
|
|
||||||
/********************************************************************
|
|
||||||
* Memory Bank 1 (Holtek HT6542B PS/2) initialization
|
|
||||||
*******************************************************************/
|
|
||||||
WDCR_EBC(PB1AP, 0x1f869200)
|
|
||||||
WDCR_EBC(PB1CR, 0xf0818000)
|
|
||||||
/********************************************************************
|
|
||||||
* Memory Bank 2 (Epson S1D13506) initialization
|
|
||||||
*******************************************************************/
|
|
||||||
WDCR_EBC(PB2AP, 0x05860300)
|
|
||||||
WDCR_EBC(PB2CR, 0xf045a000)
|
|
||||||
/********************************************************************
|
|
||||||
* Memory Bank 3 (Philips SJA1000 CAN Controllers) initialization
|
|
||||||
*******************************************************************/
|
|
||||||
WDCR_EBC(PB3AP, 0x0387d200)
|
|
||||||
WDCR_EBC(PB3CR, 0xf021c000)
|
|
||||||
/********************************************************************
|
|
||||||
* Memory Bank 4-7 (Unused) initialization
|
|
||||||
*******************************************************************/
|
|
||||||
WDCR_EBC(PB4AP, 0)
|
|
||||||
WDCR_EBC(PB4CR, 0)
|
|
||||||
WDCR_EBC(PB5AP, 0)
|
|
||||||
WDCR_EBC(PB5CR, 0)
|
|
||||||
WDCR_EBC(PB6AP, 0)
|
|
||||||
WDCR_EBC(PB6CR, 0)
|
|
||||||
WDCR_EBC(PB7AP, 0)
|
|
||||||
WDCR_EBC(PB7CR, 0)
|
|
||||||
|
|
||||||
/* We are all done */
|
|
||||||
mtlr r0 /* Restore link register */
|
|
||||||
blr /* Return to calling function */
|
|
||||||
.Lfe0: .size ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init
|
|
||||||
/* end ext_bus_cntlr_init() */
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* Function: sdram_init
|
|
||||||
*
|
|
||||||
* Description: Configures SDRAM memory banks.
|
|
||||||
*
|
|
||||||
* Notes: Does NOT use the stack.
|
|
||||||
*****************************************************************************/
|
|
||||||
.section ".text"
|
|
||||||
.align 2
|
|
||||||
.globl sdram_init
|
|
||||||
.type sdram_init, @function
|
|
||||||
sdram_init:
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Disable memory controller to allow
|
|
||||||
* values to be changed.
|
|
||||||
*/
|
|
||||||
WDCR_SDRAM(SDRAM0_CFG, 0x00000000)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Configure Memory Banks
|
|
||||||
*/
|
|
||||||
WDCR_SDRAM(SDRAM0_B0CR, 0x00084001)
|
|
||||||
WDCR_SDRAM(SDRAM0_B1CR, 0x00000000)
|
|
||||||
WDCR_SDRAM(SDRAM0_B2CR, 0x00000000)
|
|
||||||
WDCR_SDRAM(SDRAM0_B3CR, 0x00000000)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Set up SDTR1 (SDRAM Timing Register)
|
|
||||||
*/
|
|
||||||
WDCR_SDRAM(SDRAM0_TR, 0x00854009)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Set RTR (Refresh Timing Register)
|
|
||||||
*/
|
|
||||||
WDCR_SDRAM(SDRAM0_RTR, 0x10000000)
|
|
||||||
/* WDCR_SDRAM(SDRAM0_RTR, 0x05f00000) */
|
|
||||||
|
|
||||||
/********************************************************************
|
|
||||||
* Delay to ensure 200usec have elapsed since reset. Assume worst
|
|
||||||
* case that the core is running 200Mhz:
|
|
||||||
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
|
|
||||||
*******************************************************************/
|
|
||||||
addis r3, 0, 0x0000
|
|
||||||
ori r3, r3, 0xA000 /* Wait >200us from reset */
|
|
||||||
mtctr r3
|
|
||||||
..spinlp2:
|
|
||||||
bdnz ..spinlp2 /* spin loop */
|
|
||||||
|
|
||||||
/********************************************************************
|
|
||||||
* Set memory controller options reg, MCOPT1.
|
|
||||||
*******************************************************************/
|
|
||||||
WDCR_SDRAM(SDRAM0_CFG,0x80800000)
|
|
||||||
|
|
||||||
..sdri_done:
|
|
||||||
blr /* Return to calling function */
|
|
||||||
.Lfe1: .size sdram_init,.Lfe1-sdram_init
|
|
||||||
/* end sdram_init() */
|
|
||||||
@@ -1,9 +0,0 @@
|
|||||||
if TARGET_CSB472
|
|
||||||
|
|
||||||
config SYS_BOARD
|
|
||||||
default "csb472"
|
|
||||||
|
|
||||||
config SYS_CONFIG_NAME
|
|
||||||
default "csb472"
|
|
||||||
|
|
||||||
endif
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
CSB472 BOARD
|
|
||||||
M: Tolunay Orkun <torkun@nextio.com>
|
|
||||||
S: Maintained
|
|
||||||
F: board/csb472/
|
|
||||||
F: include/configs/csb472.h
|
|
||||||
F: configs/csb472_defconfig
|
|
||||||
@@ -1,9 +0,0 @@
|
|||||||
#
|
|
||||||
# (C) Copyright 2000-2006
|
|
||||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
obj-y = csb472.o
|
|
||||||
obj-y += init.o
|
|
||||||
@@ -1,138 +0,0 @@
|
|||||||
/*
|
|
||||||
* (C) Copyright 2004
|
|
||||||
* Tolunay Orkun, Nextio Inc., torkun@nextio.com
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <asm/processor.h>
|
|
||||||
#include <i2c.h>
|
|
||||||
#include <miiphy.h>
|
|
||||||
#include <asm/ppc4xx-emac.h>
|
|
||||||
|
|
||||||
void sdram_init(void);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* board_early_init_f: do early board initialization
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
int board_early_init_f(void)
|
|
||||||
{
|
|
||||||
/*-------------------------------------------------------------------------+
|
|
||||||
| Interrupt controller setup for the Walnut board.
|
|
||||||
| Note: IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
||||||
| IRQ 16 405GP internally generated; active low; level sensitive
|
|
||||||
| IRQ 17-24 RESERVED
|
|
||||||
| IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
|
|
||||||
| IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
|
|
||||||
| IRQ 27 (EXT IRQ 2) Not Used
|
|
||||||
| IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
|
|
||||||
| IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
|
|
||||||
| IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
|
|
||||||
| IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
|
|
||||||
| Note for Walnut board:
|
|
||||||
| An interrupt taken for the FPGA (IRQ 25) indicates that either
|
|
||||||
| the Mouse, Keyboard, IRDA, or External Expansion caused the
|
|
||||||
| interrupt. The FPGA must be read to determine which device
|
|
||||||
| caused the interrupt. The default setting of the FPGA clears
|
|
||||||
|
|
|
||||||
+-------------------------------------------------------------------------*/
|
|
||||||
|
|
||||||
mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
||||||
mtdcr (UIC0ER, 0x00000000); /* disable all ints */
|
|
||||||
mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
|
|
||||||
mtdcr (UIC0PR, 0xFFFFFF83); /* set int polarities */
|
|
||||||
mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
|
|
||||||
mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
|
|
||||||
mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
||||||
|
|
||||||
mtebc (EBC0_CFG, 0xa8400000); /* EBC always driven */
|
|
||||||
|
|
||||||
return 0; /* success */
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* checkboard: identify/verify the board we are running
|
|
||||||
*
|
|
||||||
* Remark: we just assume it is correct board here!
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
int checkboard(void)
|
|
||||||
{
|
|
||||||
printf("BOARD: Cogent CSB472\n");
|
|
||||||
|
|
||||||
return 0; /* success */
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* initram: Determine the size of mounted DRAM
|
|
||||||
*
|
|
||||||
* Size is determined by reading SDRAM configuration registers as
|
|
||||||
* configured by initialization code
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
phys_size_t initdram (int board_type)
|
|
||||||
{
|
|
||||||
ulong tot_size;
|
|
||||||
ulong bank_size;
|
|
||||||
ulong tmp;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* ToDo: Move the asm init routine sdram_init() to this C file,
|
|
||||||
* or even better use some common ppc4xx code available
|
|
||||||
* in arch/powerpc/cpu/ppc4xx
|
|
||||||
*/
|
|
||||||
sdram_init();
|
|
||||||
|
|
||||||
tot_size = 0;
|
|
||||||
|
|
||||||
mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
|
|
||||||
tmp = mfdcr (SDRAM0_CFGDATA);
|
|
||||||
if (tmp & 0x00000001) {
|
|
||||||
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
||||||
tot_size += bank_size;
|
|
||||||
}
|
|
||||||
|
|
||||||
mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
|
|
||||||
tmp = mfdcr (SDRAM0_CFGDATA);
|
|
||||||
if (tmp & 0x00000001) {
|
|
||||||
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
||||||
tot_size += bank_size;
|
|
||||||
}
|
|
||||||
|
|
||||||
mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
|
|
||||||
tmp = mfdcr (SDRAM0_CFGDATA);
|
|
||||||
if (tmp & 0x00000001) {
|
|
||||||
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
||||||
tot_size += bank_size;
|
|
||||||
}
|
|
||||||
|
|
||||||
mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
|
|
||||||
tmp = mfdcr (SDRAM0_CFGDATA);
|
|
||||||
if (tmp & 0x00000001) {
|
|
||||||
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
||||||
tot_size += bank_size;
|
|
||||||
}
|
|
||||||
|
|
||||||
return tot_size;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* last_stage_init: final configurations (such as PHY etc)
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
int last_stage_init(void)
|
|
||||||
{
|
|
||||||
/* initialize the PHY */
|
|
||||||
miiphy_reset("ppc_4xx_eth0", CONFIG_PHY_ADDR);
|
|
||||||
|
|
||||||
/* AUTO neg */
|
|
||||||
miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, MII_BMCR,
|
|
||||||
BMCR_ANENABLE | BMCR_ANRESTART);
|
|
||||||
|
|
||||||
/* LEDs */
|
|
||||||
miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, MII_NWAYTEST, 0x0d08);
|
|
||||||
|
|
||||||
return 0; /* success */
|
|
||||||
}
|
|
||||||
@@ -1,192 +0,0 @@
|
|||||||
/*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0 IBM-pibs
|
|
||||||
*/
|
|
||||||
#include <config.h>
|
|
||||||
#include <asm/ppc4xx.h>
|
|
||||||
|
|
||||||
#include <ppc_asm.tmpl>
|
|
||||||
#include <ppc_defs.h>
|
|
||||||
|
|
||||||
#include <asm/cache.h>
|
|
||||||
#include <asm/mmu.h>
|
|
||||||
|
|
||||||
#define LI32(reg,val) \
|
|
||||||
addis reg,0,val@h;\
|
|
||||||
ori reg,reg,val@l
|
|
||||||
|
|
||||||
#define WDCR_EBC(reg,val) \
|
|
||||||
addi r4,0,reg;\
|
|
||||||
mtdcr EBC0_CFGADDR,r4;\
|
|
||||||
addis r4,0,val@h;\
|
|
||||||
ori r4,r4,val@l;\
|
|
||||||
mtdcr EBC0_CFGDATA,r4
|
|
||||||
|
|
||||||
#define WDCR_SDRAM(reg,val) \
|
|
||||||
addi r4,0,reg;\
|
|
||||||
mtdcr SDRAM0_CFGADDR,r4;\
|
|
||||||
addis r4,0,val@h;\
|
|
||||||
ori r4,r4,val@l;\
|
|
||||||
mtdcr SDRAM0_CFGDATA,r4
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* Function: ext_bus_cntlr_init
|
|
||||||
*
|
|
||||||
* Description: Configures EBC Controller and a few basic chip selects.
|
|
||||||
*
|
|
||||||
* CS0 is setup to get the Boot Flash out of the addresss range
|
|
||||||
* so that we may setup a stack. CS7 is setup so that we can
|
|
||||||
* access and reset the hardware watchdog.
|
|
||||||
*
|
|
||||||
* IMPORTANT: For pass1 this code must run from
|
|
||||||
* cache since you can not reliably change a peripheral banks
|
|
||||||
* timing register (pbxap) while running code from that bank.
|
|
||||||
* For ex., since we are running from ROM on bank 0, we can NOT
|
|
||||||
* execute the code that modifies bank 0 timings from ROM, so
|
|
||||||
* we run it from cache.
|
|
||||||
*
|
|
||||||
* Notes: Does NOT use the stack.
|
|
||||||
*****************************************************************************/
|
|
||||||
.section ".text"
|
|
||||||
.align 2
|
|
||||||
.globl ext_bus_cntlr_init
|
|
||||||
.type ext_bus_cntlr_init, @function
|
|
||||||
ext_bus_cntlr_init:
|
|
||||||
mflr r0
|
|
||||||
/********************************************************************
|
|
||||||
* Prefetch entire ext_bus_cntrl_init function into the icache.
|
|
||||||
* This is necessary because we are going to change the same CS we
|
|
||||||
* are executing from. Otherwise a CPU lockup may occur.
|
|
||||||
*******************************************************************/
|
|
||||||
bl ..getAddr
|
|
||||||
..getAddr:
|
|
||||||
mflr r3 /* get address of ..getAddr */
|
|
||||||
|
|
||||||
/* Calculate number of cache lines for this function */
|
|
||||||
addi r4, 0, (((.Lfe0 - ..getAddr) / CONFIG_SYS_CACHELINE_SIZE) + 2)
|
|
||||||
mtctr r4
|
|
||||||
..ebcloop:
|
|
||||||
icbt r0, r3 /* prefetch cache line for addr in r3*/
|
|
||||||
addi r3, r3, CONFIG_SYS_CACHELINE_SIZE /* move to next cache line */
|
|
||||||
bdnz ..ebcloop /* continue for $CTR cache lines */
|
|
||||||
|
|
||||||
/********************************************************************
|
|
||||||
* Delay to ensure all accesses to ROM are complete before changing
|
|
||||||
* bank 0 timings. 200usec should be enough.
|
|
||||||
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles.
|
|
||||||
*******************************************************************/
|
|
||||||
addis r3, 0, 0x0
|
|
||||||
ori r3, r3, 0xA000 /* wait 200us from reset */
|
|
||||||
mtctr r3
|
|
||||||
..spinlp:
|
|
||||||
bdnz ..spinlp /* spin loop */
|
|
||||||
|
|
||||||
/********************************************************************
|
|
||||||
* SETUP CPC0_CR0
|
|
||||||
*******************************************************************/
|
|
||||||
LI32(r4, 0x00c01030)
|
|
||||||
mtdcr CPC0_CR0, r4
|
|
||||||
|
|
||||||
/********************************************************************
|
|
||||||
* Setup CPC0_CR1: Change PCIINT signal to PerWE
|
|
||||||
*******************************************************************/
|
|
||||||
mfdcr r4, CPC0_CR1
|
|
||||||
ori r4, r4, 0x4000
|
|
||||||
mtdcr CPC0_CR1, r4
|
|
||||||
|
|
||||||
/********************************************************************
|
|
||||||
* Setup External Bus Controller (EBC).
|
|
||||||
*******************************************************************/
|
|
||||||
WDCR_EBC(EBC0_CFG, 0xd84c0000)
|
|
||||||
/********************************************************************
|
|
||||||
* Memory Bank 0 (Intel 28F640J3 Flash) initialization
|
|
||||||
*******************************************************************/
|
|
||||||
/*WDCR_EBC(PB1AP, 0x03055200)*/
|
|
||||||
/*WDCR_EBC(PB1AP, 0x04055200)*/
|
|
||||||
WDCR_EBC(PB1AP, 0x08055200)
|
|
||||||
WDCR_EBC(PB0CR, 0xff87a000)
|
|
||||||
/********************************************************************
|
|
||||||
* Memory Bank 3 (Xilinx XC95144 CPLD) initialization
|
|
||||||
*******************************************************************/
|
|
||||||
/*WDCR_EBC(PB3AP, 0x07869200)*/
|
|
||||||
WDCR_EBC(PB3AP, 0x04055200)
|
|
||||||
WDCR_EBC(PB3CR, 0xf081c000)
|
|
||||||
/********************************************************************
|
|
||||||
* Memory Bank 1,2,4-7 (Unused) initialization
|
|
||||||
*******************************************************************/
|
|
||||||
WDCR_EBC(PB1AP, 0)
|
|
||||||
WDCR_EBC(PB1CR, 0)
|
|
||||||
WDCR_EBC(PB2AP, 0)
|
|
||||||
WDCR_EBC(PB2CR, 0)
|
|
||||||
WDCR_EBC(PB4AP, 0)
|
|
||||||
WDCR_EBC(PB4CR, 0)
|
|
||||||
WDCR_EBC(PB5AP, 0)
|
|
||||||
WDCR_EBC(PB5CR, 0)
|
|
||||||
WDCR_EBC(PB6AP, 0)
|
|
||||||
WDCR_EBC(PB6CR, 0)
|
|
||||||
WDCR_EBC(PB7AP, 0)
|
|
||||||
WDCR_EBC(PB7CR, 0)
|
|
||||||
|
|
||||||
/* We are all done */
|
|
||||||
mtlr r0 /* Restore link register */
|
|
||||||
blr /* Return to calling function */
|
|
||||||
.Lfe0: .size ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init
|
|
||||||
/* end ext_bus_cntlr_init() */
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* Function: sdram_init
|
|
||||||
*
|
|
||||||
* Description: Configures SDRAM memory banks.
|
|
||||||
*
|
|
||||||
* Notes: Does NOT use the stack.
|
|
||||||
*****************************************************************************/
|
|
||||||
.section ".text"
|
|
||||||
.align 2
|
|
||||||
.globl sdram_init
|
|
||||||
.type sdram_init, @function
|
|
||||||
sdram_init:
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Disable memory controller to allow
|
|
||||||
* values to be changed.
|
|
||||||
*/
|
|
||||||
WDCR_SDRAM(SDRAM0_CFG, 0x00000000)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Configure Memory Banks
|
|
||||||
*/
|
|
||||||
WDCR_SDRAM(SDRAM0_B0CR, 0x00062001)
|
|
||||||
WDCR_SDRAM(SDRAM0_B1CR, 0x00000000)
|
|
||||||
WDCR_SDRAM(SDRAM0_B2CR, 0x00000000)
|
|
||||||
WDCR_SDRAM(SDRAM0_B3CR, 0x00000000)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Set up SDTR1 (SDRAM Timing Register)
|
|
||||||
*/
|
|
||||||
WDCR_SDRAM(SDRAM0_TR, 0x00854009)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Set RTR (Refresh Timing Register)
|
|
||||||
*/
|
|
||||||
WDCR_SDRAM(SDRAM0_RTR, 0x10000000)
|
|
||||||
/* WDCR_SDRAM(SDRAM0_RTR, 0x05f00000) */
|
|
||||||
|
|
||||||
/********************************************************************
|
|
||||||
* Delay to ensure 200usec have elapsed since reset. Assume worst
|
|
||||||
* case that the core is running 200Mhz:
|
|
||||||
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
|
|
||||||
*******************************************************************/
|
|
||||||
addis r3, 0, 0x0000
|
|
||||||
ori r3, r3, 0xA000 /* Wait >200us from reset */
|
|
||||||
mtctr r3
|
|
||||||
..spinlp2:
|
|
||||||
bdnz ..spinlp2 /* spin loop */
|
|
||||||
|
|
||||||
/********************************************************************
|
|
||||||
* Set memory controller options reg, MCOPT1.
|
|
||||||
*******************************************************************/
|
|
||||||
WDCR_SDRAM(SDRAM0_CFG,0x80800000)
|
|
||||||
|
|
||||||
..sdri_done:
|
|
||||||
blr /* Return to calling function */
|
|
||||||
.Lfe1: .size sdram_init,.Lfe1-sdram_init
|
|
||||||
/* end sdram_init() */
|
|
||||||
@@ -1,4 +0,0 @@
|
|||||||
CONFIG_PPC=y
|
|
||||||
CONFIG_4xx=y
|
|
||||||
CONFIG_TARGET_CSB272=y
|
|
||||||
# CONFIG_CMD_SETEXPR is not set
|
|
||||||
@@ -1,4 +0,0 @@
|
|||||||
CONFIG_PPC=y
|
|
||||||
CONFIG_4xx=y
|
|
||||||
CONFIG_TARGET_CSB472=y
|
|
||||||
# CONFIG_CMD_SETEXPR is not set
|
|
||||||
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
|
|||||||
|
|
||||||
Board Arch CPU Commit Removed Last known maintainer/contact
|
Board Arch CPU Commit Removed Last known maintainer/contact
|
||||||
=================================================================================================
|
=================================================================================================
|
||||||
|
csb272/csb472 powerpc ppc4xx - - Tolunay Orkun <torkun@nextio.com>
|
||||||
alpr powerpc ppc4xx - - Stefan Roese <sr@denx.de>
|
alpr powerpc ppc4xx - - Stefan Roese <sr@denx.de>
|
||||||
cam_enc_4xx arm arm926ejs 8d775763 2015-08-20 Heiko Schocher <hs@denx.de>
|
cam_enc_4xx arm arm926ejs 8d775763 2015-08-20 Heiko Schocher <hs@denx.de>
|
||||||
atstk1003 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
|
atstk1003 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
|
||||||
|
|||||||
@@ -1,282 +0,0 @@
|
|||||||
/*
|
|
||||||
* (C) Copyright 2004
|
|
||||||
* Tolunay Orkun, Nextio Inc., torkun@nextio.com
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* board/config.h - configuration options, board specific
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef __CONFIG_H
|
|
||||||
#define __CONFIG_H
|
|
||||||
|
|
||||||
/*
|
|
||||||
* High Level Configuration Options
|
|
||||||
* (easy to change)
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
|
|
||||||
#define CONFIG_CSB272 1 /* on a Cogent CSB272 board */
|
|
||||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */
|
|
||||||
#define CONFIG_LAST_STAGE_INIT 1 /* Call last_stage_init() */
|
|
||||||
#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
|
|
||||||
|
|
||||||
/*
|
|
||||||
* OS Bootstrap configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if 0
|
|
||||||
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
|
|
||||||
#else
|
|
||||||
#define CONFIG_BOOTDELAY 3 /* autoboot after X seconds */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress when bootdelay = 0 */
|
|
||||||
|
|
||||||
#if 1
|
|
||||||
#undef CONFIG_BOOTARGS
|
|
||||||
#define CONFIG_BOOTCOMMAND \
|
|
||||||
"setenv bootargs console=ttyS0,38400 debug " \
|
|
||||||
"root=/dev/ram rw ramdisk_size=4096 " \
|
|
||||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
|
|
||||||
"bootm fe000000 fe100000"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if 0
|
|
||||||
#undef CONFIG_BOOTARGS
|
|
||||||
#define CONFIG_BOOTCOMMAND \
|
|
||||||
"bootp; " \
|
|
||||||
"setenv bootargs console=ttyS0,38400 debug " \
|
|
||||||
"root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
|
|
||||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
|
|
||||||
"bootm"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* BOOTP options
|
|
||||||
*/
|
|
||||||
#define CONFIG_BOOTP_SUBNETMASK
|
|
||||||
#define CONFIG_BOOTP_GATEWAY
|
|
||||||
#define CONFIG_BOOTP_HOSTNAME
|
|
||||||
#define CONFIG_BOOTP_BOOTPATH
|
|
||||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
||||||
#define CONFIG_BOOTP_DNS2
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Command line configuration.
|
|
||||||
*/
|
|
||||||
#define CONFIG_CMD_ASKENV
|
|
||||||
#define CONFIG_CMD_BEDBUG
|
|
||||||
#define CONFIG_CMD_ELF
|
|
||||||
#define CONFIG_CMD_IRQ
|
|
||||||
#define CONFIG_CMD_I2C
|
|
||||||
#define CONFIG_CMD_PCI
|
|
||||||
#define CONFIG_CMD_DATE
|
|
||||||
#define CONFIG_CMD_MII
|
|
||||||
#define CONFIG_CMD_PING
|
|
||||||
#define CONFIG_CMD_DHCP
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Serial download configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
||||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* KGDB Configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#if defined(CONFIG_CMD_KGDB)
|
|
||||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Miscellaneous configurable options
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
||||||
#if defined(CONFIG_CMD_KGDB)
|
|
||||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
||||||
#else
|
|
||||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
||||||
#endif
|
|
||||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
||||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
||||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
|
|
||||||
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
|
||||||
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */
|
|
||||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* For booting Linux, the board info and command line data
|
|
||||||
* have to be in the first 8 MB of memory, since this is
|
|
||||||
* the maximum mapped by the Linux kernel during initialization.
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* watchdog configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* UART configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_CONS_INDEX 1 /* Use UART0 */
|
|
||||||
#define CONFIG_SYS_NS16550
|
|
||||||
#define CONFIG_SYS_NS16550_SERIAL
|
|
||||||
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
||||||
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
|
|
||||||
|
|
||||||
#define CONFIG_SYS_EXT_SERIAL_CLOCK 3868400 /* use external serial clock */
|
|
||||||
#undef CONFIG_SYS_BASE_BAUD
|
|
||||||
#define CONFIG_BAUDRATE 38400 /* Default baud rate */
|
|
||||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
||||||
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
||||||
|
|
||||||
/*
|
|
||||||
* I2C configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_I2C
|
|
||||||
#define CONFIG_SYS_I2C_PPC4XX
|
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_CH0
|
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000
|
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F /* I2C slave address */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* MII PHY configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_PPC4xx_EMAC
|
|
||||||
#define CONFIG_MII 1 /* MII PHY management */
|
|
||||||
#define CONFIG_PHY_ADDR 0 /* PHY address */
|
|
||||||
#define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */
|
|
||||||
/* 32usec min. for LXT971A */
|
|
||||||
#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* RTC configuration
|
|
||||||
*
|
|
||||||
* Note that DS1307 RTC is limited to 100Khz I2C bus.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_RTC_DS1307 /* Use Dallas 1307 RTC */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* PCI stuff
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_PCI /* include pci support */
|
|
||||||
#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
|
|
||||||
#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
|
|
||||||
#define PCI_HOST_FORCE 1 /* configure as pci host */
|
|
||||||
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
|
|
||||||
|
|
||||||
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
|
|
||||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
||||||
/* resource configuration */
|
|
||||||
#undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
|
|
||||||
#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
|
|
||||||
|
|
||||||
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
|
|
||||||
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
|
|
||||||
#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
|
|
||||||
#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
|
|
||||||
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
|
|
||||||
#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */
|
|
||||||
#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */
|
|
||||||
#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* IDE stuff
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#undef CONFIG_IDE_PCMCIA /* no pcmcia interface required */
|
|
||||||
#undef CONFIG_IDE_LED /* no led for ide supported */
|
|
||||||
#undef CONFIG_IDE_RESET /* no reset for ide supported */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Environment configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_ENV_IS_IN_FLASH 1 /* environment is in FLASH */
|
|
||||||
#undef CONFIG_ENV_IS_IN_NVRAM
|
|
||||||
#undef CONFIG_ENV_IS_IN_EEPROM
|
|
||||||
|
|
||||||
/*
|
|
||||||
* General Memory organization
|
|
||||||
*
|
|
||||||
* Start addresses for the final memory configuration
|
|
||||||
* (Set up by the startup code)
|
|
||||||
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
||||||
#define CONFIG_SYS_FLASH_BASE 0xFE000000
|
|
||||||
#define CONFIG_SYS_FLASH_SIZE 0x02000000
|
|
||||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
||||||
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */
|
|
||||||
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 KB for malloc() */
|
|
||||||
|
|
||||||
#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
|
|
||||||
#define CONFIG_SYS_RAMSTART
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined(CONFIG_ENV_IS_IN_FLASH)
|
|
||||||
#define CONFIG_ENV_IN_OWN_SECTOR 1 /* Give Environment own sector */
|
|
||||||
#define CONFIG_ENV_ADDR 0xFFF00000 /* Address of Environment Sector */
|
|
||||||
#define CONFIG_ENV_SIZE 0x00001000 /* Size of Environment */
|
|
||||||
#define CONFIG_ENV_SECT_SIZE 0x00040000 /* Size of Environment Sector */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* FLASH Device configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */
|
|
||||||
#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
|
|
||||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */
|
|
||||||
#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max # of sectors on one chip */
|
|
||||||
#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */
|
|
||||||
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
|
||||||
|
|
||||||
/*
|
|
||||||
* On Chip Memory location/size
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
|
|
||||||
#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Global info and initial stack
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */
|
|
||||||
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */
|
|
||||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
||||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Miscellaneous board specific definitions
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_I2C_PLL_ADDR 0x58 /* I2C address of AMIS FS6377-01 PLL */
|
|
||||||
#define CONFIG_I2CFAST 1 /* enable "i2cfast" env. setting */
|
|
||||||
|
|
||||||
#endif /* __CONFIG_H */
|
|
||||||
@@ -1,281 +0,0 @@
|
|||||||
/*
|
|
||||||
* (C) Copyright 2004
|
|
||||||
* Tolunay Orkun, Nextio Inc., torkun@nextio.com
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* board/config.h - configuration options, board specific
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef __CONFIG_H
|
|
||||||
#define __CONFIG_H
|
|
||||||
|
|
||||||
/*
|
|
||||||
* High Level Configuration Options
|
|
||||||
* (easy to change)
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
|
|
||||||
#define CONFIG_CSB472 1 /* on a Cogent CSB472 board */
|
|
||||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */
|
|
||||||
#define CONFIG_LAST_STAGE_INIT 1 /* Call last_stage_init() */
|
|
||||||
#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
|
|
||||||
|
|
||||||
/*
|
|
||||||
* OS Bootstrap configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if 0
|
|
||||||
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
|
|
||||||
#else
|
|
||||||
#define CONFIG_BOOTDELAY 3 /* autoboot after X seconds */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress when bootdelay = 0 */
|
|
||||||
|
|
||||||
#if 1
|
|
||||||
#undef CONFIG_BOOTARGS
|
|
||||||
#define CONFIG_BOOTCOMMAND \
|
|
||||||
"setenv bootargs console=ttyS0,38400 debug " \
|
|
||||||
"root=/dev/ram rw ramdisk_size=4096 " \
|
|
||||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
|
|
||||||
"bootm ff800000 ff900000"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if 0
|
|
||||||
#undef CONFIG_BOOTARGS
|
|
||||||
#define CONFIG_BOOTCOMMAND \
|
|
||||||
"bootp; " \
|
|
||||||
"setenv bootargs console=ttyS0,38400 debug " \
|
|
||||||
"root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
|
|
||||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
|
|
||||||
"bootm"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* BOOTP options
|
|
||||||
*/
|
|
||||||
#define CONFIG_BOOTP_SUBNETMASK
|
|
||||||
#define CONFIG_BOOTP_GATEWAY
|
|
||||||
#define CONFIG_BOOTP_HOSTNAME
|
|
||||||
#define CONFIG_BOOTP_BOOTPATH
|
|
||||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
||||||
#define CONFIG_BOOTP_DNS2
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Command line configuration.
|
|
||||||
*/
|
|
||||||
#define CONFIG_CMD_ASKENV
|
|
||||||
#define CONFIG_CMD_BEDBUG
|
|
||||||
#define CONFIG_CMD_ELF
|
|
||||||
#define CONFIG_CMD_IRQ
|
|
||||||
#define CONFIG_CMD_I2C
|
|
||||||
#define CONFIG_CMD_PCI
|
|
||||||
#define CONFIG_CMD_DATE
|
|
||||||
#define CONFIG_CMD_MII
|
|
||||||
#define CONFIG_CMD_PING
|
|
||||||
#define CONFIG_CMD_DHCP
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Serial download configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
||||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* KGDB Configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#if defined(CONFIG_CMD_KGDB)
|
|
||||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Miscellaneous configurable options
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
||||||
#if defined(CONFIG_CMD_KGDB)
|
|
||||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
||||||
#else
|
|
||||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
||||||
#endif
|
|
||||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
||||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
||||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
|
|
||||||
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */
|
|
||||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* For booting Linux, the board info and command line data
|
|
||||||
* have to be in the first 8 MB of memory, since this is
|
|
||||||
* the maximum mapped by the Linux kernel during initialization.
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* watchdog configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* UART configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_CONS_INDEX 1 /* Use UART0 */
|
|
||||||
#define CONFIG_SYS_NS16550
|
|
||||||
#define CONFIG_SYS_NS16550_SERIAL
|
|
||||||
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
||||||
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
|
|
||||||
|
|
||||||
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* use internal serial clock */
|
|
||||||
#define CONFIG_SYS_BASE_BAUD 691200
|
|
||||||
#define CONFIG_BAUDRATE 38400 /* Default baud rate */
|
|
||||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
||||||
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
||||||
|
|
||||||
/*
|
|
||||||
* I2C configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_I2C
|
|
||||||
#define CONFIG_SYS_I2C_PPC4XX
|
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_CH0
|
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000
|
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F /* I2C slave address */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* MII PHY configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_PPC4xx_EMAC
|
|
||||||
#define CONFIG_MII 1 /* MII PHY management */
|
|
||||||
#define CONFIG_PHY_ADDR 0 /* PHY address */
|
|
||||||
#define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */
|
|
||||||
/* 32usec min. for LXT971A */
|
|
||||||
#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* RTC configuration
|
|
||||||
*
|
|
||||||
* Note that DS1307 RTC is limited to 100Khz I2C bus.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_RTC_DS1307 /* Use Dallas 1307 RTC */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* PCI stuff
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_PCI /* include pci support */
|
|
||||||
#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
|
|
||||||
#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
|
|
||||||
#define PCI_HOST_FORCE 1 /* configure as pci host */
|
|
||||||
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
|
|
||||||
|
|
||||||
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
|
|
||||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
||||||
/* resource configuration */
|
|
||||||
#undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
|
|
||||||
#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
|
|
||||||
|
|
||||||
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
|
|
||||||
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
|
|
||||||
#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
|
|
||||||
#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
|
|
||||||
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
|
|
||||||
#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */
|
|
||||||
#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */
|
|
||||||
#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* IDE stuff
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#undef CONFIG_IDE_PCMCIA /* no pcmcia interface required */
|
|
||||||
#undef CONFIG_IDE_LED /* no led for ide supported */
|
|
||||||
#undef CONFIG_IDE_RESET /* no reset for ide supported */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Environment configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_ENV_IS_IN_FLASH 1 /* environment is in FLASH */
|
|
||||||
#undef CONFIG_ENV_IS_IN_NVRAM
|
|
||||||
#undef CONFIG_ENV_IS_IN_EEPROM
|
|
||||||
|
|
||||||
/*
|
|
||||||
* General Memory organization
|
|
||||||
*
|
|
||||||
* Start addresses for the final memory configuration
|
|
||||||
* (Set up by the startup code)
|
|
||||||
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
||||||
#define CONFIG_SYS_FLASH_BASE 0xFF800000
|
|
||||||
#define CONFIG_SYS_FLASH_SIZE 0x00800000
|
|
||||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
||||||
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */
|
|
||||||
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 KB for malloc() */
|
|
||||||
|
|
||||||
#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
|
|
||||||
#define CONFIG_SYS_RAMSTART
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined(CONFIG_ENV_IS_IN_FLASH)
|
|
||||||
#define CONFIG_ENV_IN_OWN_SECTOR 1 /* Give Environment own sector */
|
|
||||||
#define CONFIG_ENV_ADDR 0xFFF00000 /* Address of Environment Sector */
|
|
||||||
#define CONFIG_ENV_SIZE 0x00001000 /* Size of Environment */
|
|
||||||
#define CONFIG_ENV_SECT_SIZE 0x00040000 /* Size of Environment Sector */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* FLASH Device configuration
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */
|
|
||||||
#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
|
|
||||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */
|
|
||||||
#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max # of sectors on one chip */
|
|
||||||
#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */
|
|
||||||
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
|
||||||
|
|
||||||
/*
|
|
||||||
* On Chip Memory location/size
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
|
|
||||||
#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Global info and initial stack
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */
|
|
||||||
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */
|
|
||||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
||||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Miscellaneous board specific definitions
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define CONFIG_I2CFAST 1 /* enable "i2cfast" env. setting */
|
|
||||||
|
|
||||||
#endif /* __CONFIG_H */
|
|
||||||
Reference in New Issue
Block a user