mirror of
				https://xff.cz/git/u-boot/
				synced 2025-10-31 18:35:42 +01:00 
			
		
		
		
	x86: chromebook_link: Enable GPIO support
Enable GPIO support and provide the required GPIO setup information to the driver. Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
		| @@ -14,18 +14,21 @@ | ||||
|  | ||||
| 	gpioa { | ||||
| 		compatible = "intel,ich6-gpio"; | ||||
| 		u-boot,dm-pre-reloc; | ||||
| 		reg = <0 0x10>; | ||||
| 		bank-name = "A"; | ||||
| 	}; | ||||
|  | ||||
| 	gpiob { | ||||
| 		compatible = "intel,ich6-gpio"; | ||||
| 		u-boot,dm-pre-reloc; | ||||
| 		reg = <0x30 0x10>; | ||||
| 		bank-name = "B"; | ||||
| 	}; | ||||
|  | ||||
| 	gpioc { | ||||
| 		compatible = "intel,ich6-gpio"; | ||||
| 		u-boot,dm-pre-reloc; | ||||
| 		reg = <0x40 0x10>; | ||||
| 		bank-name = "C"; | ||||
| 	}; | ||||
|   | ||||
| @@ -5,6 +5,7 @@ | ||||
|  */ | ||||
|  | ||||
| #include <common.h> | ||||
| #include <asm/gpio.h> | ||||
|  | ||||
| int arch_early_init_r(void) | ||||
| { | ||||
| @@ -15,3 +16,109 @@ int board_early_init_r(void) | ||||
| { | ||||
| 	return 0; | ||||
| } | ||||
|  | ||||
| static const struct pch_gpio_set1 pch_gpio_set1_mode = { | ||||
| 	.gpio0 = GPIO_MODE_GPIO,  /* NMI_DBG# */ | ||||
| 	.gpio3 = GPIO_MODE_GPIO,  /* ALS_INT# */ | ||||
| 	.gpio5 = GPIO_MODE_GPIO,  /* SIM_DET */ | ||||
| 	.gpio7 = GPIO_MODE_GPIO,  /* EC_SCI# */ | ||||
| 	.gpio8 = GPIO_MODE_GPIO,  /* EC_SMI# */ | ||||
| 	.gpio9 = GPIO_MODE_GPIO,  /* RECOVERY# */ | ||||
| 	.gpio10 = GPIO_MODE_GPIO, /* SPD vector D3 */ | ||||
| 	.gpio11 = GPIO_MODE_GPIO, /* smbalert#, let's keep it initialized */ | ||||
| 	.gpio12 = GPIO_MODE_GPIO, /* TP_INT# */ | ||||
| 	.gpio14 = GPIO_MODE_GPIO, /* Touch_INT_L */ | ||||
| 	.gpio15 = GPIO_MODE_GPIO, /* EC_LID_OUT# (EC_WAKE#) */ | ||||
| 	.gpio21 = GPIO_MODE_GPIO, /* EC_IN_RW */ | ||||
| 	.gpio24 = GPIO_MODE_GPIO, /* DDR3L_EN */ | ||||
| 	.gpio28 = GPIO_MODE_GPIO, /* SLP_ME_CSW_DEV# */ | ||||
| }; | ||||
|  | ||||
| static const struct pch_gpio_set1 pch_gpio_set1_direction = { | ||||
| 	.gpio0 = GPIO_DIR_INPUT, | ||||
| 	.gpio3 = GPIO_DIR_INPUT, | ||||
| 	.gpio5 = GPIO_DIR_INPUT, | ||||
| 	.gpio7 = GPIO_DIR_INPUT, | ||||
| 	.gpio8 = GPIO_DIR_INPUT, | ||||
| 	.gpio9 = GPIO_DIR_INPUT, | ||||
| 	.gpio10 = GPIO_DIR_INPUT, | ||||
| 	.gpio11 = GPIO_DIR_INPUT, | ||||
| 	.gpio12 = GPIO_DIR_INPUT, | ||||
| 	.gpio14 = GPIO_DIR_INPUT, | ||||
| 	.gpio15 = GPIO_DIR_INPUT, | ||||
| 	.gpio21 = GPIO_DIR_INPUT, | ||||
| 	.gpio24 = GPIO_DIR_OUTPUT, | ||||
| 	.gpio28 = GPIO_DIR_INPUT, | ||||
| }; | ||||
|  | ||||
| static const struct pch_gpio_set1 pch_gpio_set1_level = { | ||||
| 	.gpio1 = GPIO_LEVEL_HIGH, | ||||
| 	.gpio6 = GPIO_LEVEL_HIGH, | ||||
| 	.gpio24 = GPIO_LEVEL_LOW, | ||||
| }; | ||||
|  | ||||
| static const struct pch_gpio_set1 pch_gpio_set1_invert = { | ||||
| 	.gpio7 = GPIO_INVERT, | ||||
| 	.gpio8 = GPIO_INVERT, | ||||
| 	.gpio12 = GPIO_INVERT, | ||||
| 	.gpio14 = GPIO_INVERT, | ||||
| 	.gpio15 = GPIO_INVERT, | ||||
| }; | ||||
|  | ||||
| static const struct pch_gpio_set2 pch_gpio_set2_mode = { | ||||
| 	.gpio36 = GPIO_MODE_GPIO, /* W_DISABLE_L */ | ||||
| 	.gpio41 = GPIO_MODE_GPIO, /* SPD vector D0 */ | ||||
| 	.gpio42 = GPIO_MODE_GPIO, /* SPD vector D1 */ | ||||
| 	.gpio43 = GPIO_MODE_GPIO, /* SPD vector D2 */ | ||||
| 	.gpio57 = GPIO_MODE_GPIO, /* PCH_SPI_WP_D */ | ||||
| 	.gpio60 = GPIO_MODE_GPIO, /* DRAMRST_CNTRL_PCH */ | ||||
| }; | ||||
|  | ||||
| static const struct pch_gpio_set2 pch_gpio_set2_direction = { | ||||
| 	.gpio36 = GPIO_DIR_OUTPUT, | ||||
| 	.gpio41 = GPIO_DIR_INPUT, | ||||
| 	.gpio42 = GPIO_DIR_INPUT, | ||||
| 	.gpio43 = GPIO_DIR_INPUT, | ||||
| 	.gpio57 = GPIO_DIR_INPUT, | ||||
| 	.gpio60 = GPIO_DIR_OUTPUT, | ||||
| }; | ||||
|  | ||||
| static const struct pch_gpio_set2 pch_gpio_set2_level = { | ||||
| 	.gpio36 = GPIO_LEVEL_HIGH, | ||||
| 	.gpio60 = GPIO_LEVEL_HIGH, | ||||
| }; | ||||
|  | ||||
| static const struct pch_gpio_set3 pch_gpio_set3_mode = { | ||||
| }; | ||||
|  | ||||
| static const struct pch_gpio_set3 pch_gpio_set3_direction = { | ||||
| }; | ||||
|  | ||||
| static const struct pch_gpio_set3 pch_gpio_set3_level = { | ||||
| }; | ||||
|  | ||||
| static const struct pch_gpio_map link_gpio_map = { | ||||
| 	.set1 = { | ||||
| 		.mode      = &pch_gpio_set1_mode, | ||||
| 		.direction = &pch_gpio_set1_direction, | ||||
| 		.level     = &pch_gpio_set1_level, | ||||
| 		.invert    = &pch_gpio_set1_invert, | ||||
| 	}, | ||||
| 	.set2 = { | ||||
| 		.mode      = &pch_gpio_set2_mode, | ||||
| 		.direction = &pch_gpio_set2_direction, | ||||
| 		.level     = &pch_gpio_set2_level, | ||||
| 	}, | ||||
| 	.set3 = { | ||||
| 		.mode      = &pch_gpio_set3_mode, | ||||
| 		.direction = &pch_gpio_set3_direction, | ||||
| 		.level     = &pch_gpio_set3_level, | ||||
| 	}, | ||||
| }; | ||||
|  | ||||
| int board_early_init_f(void) | ||||
| { | ||||
| 	ich_gpio_set_gpio_map(&link_gpio_map); | ||||
|  | ||||
| 	return 0; | ||||
| } | ||||
|   | ||||
| @@ -19,6 +19,7 @@ | ||||
| #define CONFIG_SYS_CAR_SIZE			(128 * 1024) | ||||
| #define CONFIG_SYS_MONITOR_LEN			(1 << 20) | ||||
| #define CONFIG_SYS_X86_START16			0xfffff800 | ||||
| #define CONFIG_BOARD_EARLY_INIT_F | ||||
| #define CONFIG_BOARD_EARLY_INIT_R | ||||
|  | ||||
| #define CONFIG_X86_RESET_VECTOR | ||||
| @@ -40,9 +41,6 @@ | ||||
|  * follow-on patches in this series. Add undefs here to avoid every patch | ||||
|  * having to put things back into x86-common.h | ||||
|  */ | ||||
| #undef CONFIG_INTEL_ICH6_GPIO | ||||
| #undef CONFIG_DM_GPIO | ||||
| #undef CONFIG_CMD_GPIO | ||||
| #undef CONFIG_VIDEO | ||||
| #undef CONFIG_CFB_CONSOLE | ||||
| #undef CONFIG_ICH_SPI | ||||
|   | ||||
		Reference in New Issue
	
	Block a user