Merge branch 'master' of http://git.denx.de/u-boot-sunxi

arch/arm/Kconfig

@@ -538,8 +538,8 @@ config ARCH_SUNXI
 	select OF_BOARD_SETUP
 	select OF_CONTROL
 	select OF_SEPARATE
-	select SPL_STACK_R if !MACH_SUN9I
-	select SPL_SYS_MALLOC_SIMPLE if !MACH_SUN9I
+	select SPL_STACK_R if SUPPORT_SPL
+	select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
 	select SYS_NS16550
 	select USB
 	select USB_STORAGE

arch/arm/Makefile

@@ -54,6 +54,7 @@ machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 # TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
 machine-$(CONFIG_ORION5X)		+= orion5x
 machine-$(CONFIG_ARCH_S5PC1XX)		+= s5pc1xx
+machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_STM32)			+= stm32

arch/arm/cpu/armv7/sunxi/Makefile

@@ -8,38 +8,10 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 obj-y	+= timer.o
-obj-y	+= board.o
-obj-y	+= clock.o
-obj-y	+= cpu_info.o
-obj-y	+= dram_helpers.o
-obj-y	+= pinmux.o
-ifndef CONFIG_MACH_SUN9I
-obj-y	+= usb_phy.o
-endif
-obj-$(CONFIG_MACH_SUN6I)	+= prcm.o
-obj-$(CONFIG_MACH_SUN8I)	+= prcm.o
-obj-$(CONFIG_MACH_SUN9I)	+= prcm.o
-obj-$(CONFIG_MACH_SUN6I)	+= p2wi.o
-obj-$(CONFIG_MACH_SUN8I)	+= rsb.o
-obj-$(CONFIG_MACH_SUN9I)	+= rsb.o
-obj-$(CONFIG_MACH_SUN4I)	+= clock_sun4i.o
-obj-$(CONFIG_MACH_SUN5I)	+= clock_sun4i.o
-obj-$(CONFIG_MACH_SUN6I)	+= clock_sun6i.o
-obj-$(CONFIG_MACH_SUN7I)	+= clock_sun4i.o
-ifdef CONFIG_MACH_SUN8I_A83T
-obj-y				+= clock_sun8i_a83t.o
-else
-obj-$(CONFIG_MACH_SUN8I)	+= clock_sun6i.o
-endif
-obj-$(CONFIG_MACH_SUN9I)	+= clock_sun9i.o
+
 obj-$(CONFIG_MACH_SUN6I)	+= tzpc.o
 obj-$(CONFIG_MACH_SUN8I_H3)	+= tzpc.o
 
-obj-$(CONFIG_AXP152_POWER)	+= pmic_bus.o
-obj-$(CONFIG_AXP209_POWER)	+= pmic_bus.o
-obj-$(CONFIG_AXP221_POWER)	+= pmic_bus.o
-obj-$(CONFIG_AXP818_POWER)	+= pmic_bus.o
-
 ifndef CONFIG_SPL_BUILD
 ifdef CONFIG_ARMV7_PSCI
 obj-$(CONFIG_MACH_SUN6I)	+= psci_sun6i.o
@@ -49,13 +21,5 @@ endif
 endif
 
 ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i.o
-obj-$(CONFIG_MACH_SUN5I)	+= dram_sun4i.o
-obj-$(CONFIG_MACH_SUN6I)	+= dram_sun6i.o
-obj-$(CONFIG_MACH_SUN7I)	+= dram_sun4i.o
-obj-$(CONFIG_MACH_SUN8I_A23)	+= dram_sun8i_a23.o
-obj-$(CONFIG_MACH_SUN8I_A33)	+= dram_sun8i_a33.o
-obj-$(CONFIG_MACH_SUN8I_A83T)	+= dram_sun8i_a83t.o
-obj-$(CONFIG_MACH_SUN8I_H3)	+= dram_sun8i_h3.o
 obj-y	+= fel_utils.o
 endif

arch/arm/dts/Makefile

@@ -206,6 +206,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
 	sun8i-h3-orangepi-2.dtb \
 	sun8i-h3-orangepi-pc.dtb \
 	sun8i-h3-orangepi-plus.dtb
+dtb-$(CONFIG_MACH_SUN50I) += \
+	pine64_plus.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb

arch/arm/dts/a64.dtsi

@@ -0,0 +1,564 @@
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ * based on the Allwinner H3 dtsi:
+ * 	Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	compatible = "allwinner,a64";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+        memory {
+		device_type = "memory";
+		reg = <0x40000000 0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6", "pll6x2";
+		};
+
+		pll6d2: pll6d2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&pll6 0>;
+			clock-output-names = "pll6d2";
+		};
+
+		/* dummy clock until pll6 can be reused */
+		pll8: pll8_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <1>;
+			clock-output-names = "pll8";
+		};
+
+		cpu: cpu_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb1: ahb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+			clock-output-names = "ahb1";
+		};
+
+		ahb2: ahb2_clk@01c2005c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-h3-ahb2-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&ahb1>, <&pll6d2>;
+			clock-output-names = "ahb2";
+		};
+
+		apb1: apb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+			clock-output-names = "apb1";
+		};
+
+		apb2: apb2_clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6 1>, <&pll6 1>;
+			clock-output-names = "apb2";
+		};
+
+		bus_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,a64-bus-gates-clk",
+				     "allwinner,sun8i-h3-bus-gates-clk";
+			reg = <0x01c20060 0x14>;
+			clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
+			clock-names = "ahb1", "ahb2", "apb1", "apb2";
+			clock-indices = <1>,
+					<5>, <6>, <8>,
+					<9>, <10>, <13>,
+					<14>, <17>, <18>,
+					<19>, <20>,
+					<21>, <23>,
+					<24>, <25>,
+					<28>, <29>,
+					<32>, <35>,
+					<36>, <37>,
+					<40>, <43>,
+					<44>, <52>, <53>,
+					<54>, <64>,
+					<65>, <69>, <72>,
+					<76>, <77>, <78>,
+					<96>, <97>, <98>,
+					<101>,
+					<112>, <113>,
+					<114>, <115>,
+					<116>, <135>;
+			clock-output-names = "bus_mipidsi",
+					     "bus_ce", "bus_dma", "bus_mmc0",
+					     "bus_mmc1", "bus_mmc2", "bus_nand",
+					     "bus_sdram", "bus_gmac", "bus_ts",
+					     "bus_hstimer", "bus_spi0",
+					     "bus_spi1", "bus_otg",
+					     "bus_otg_ehci0", "bus_ehci0",
+					     "bus_otg_ohci0", "bus_ohci0",
+					     "bus_ve", "bus_lcd0",
+					     "bus_lcd1", "bus_deint",
+					     "bus_csi", "bus_hdmi",
+					     "bus_de", "bus_gpu", "bus_msgbox",
+					     "bus_spinlock", "bus_codec",
+					     "bus_spdif", "bus_pio", "bus_ths",
+					     "bus_i2s0", "bus_i2s1", "bus_i2s2",
+					     "bus_i2c0", "bus_i2c1", "bus_i2c2",
+					     "bus_scr",
+					     "bus_uart0", "bus_uart1",
+					     "bus_uart2", "bus_uart3",
+					     "bus_uart4", "bus_dbg";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+	};
+
+	regulators {
+		reg_vcc3v3: vcc3v3 {
+			compatible = "regulator-fixed";
+			regulator-name = "vcc3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&bus_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb_rst 8>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&bus_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb_rst 9>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&bus_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb_rst 10>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,a64-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bus_gates 69>;
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB8", "PB9";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_b: uart0@1 {
+				allwinner,pins = "PF2", "PF3";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_pins: uart1@0 {
+				allwinner,pins = "PG6", "PG7", "PG8", "PG9";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart2_pins: uart2@0 {
+				allwinner,pins = "PB0", "PB1", "PB2", "PB3";
+				allwinner,function = "uart2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins_a: uart3@0 {
+				allwinner,pins = "PD0", "PD1";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins_b: uart3@1 {
+				allwinner,pins = "PH4", "PH5", "PH6", "PH7";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart4_pins: uart4@0 {
+				allwinner,pins = "PD2", "PD3", "PD4", "PD5";
+				allwinner,function = "uart4";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_default_cd_pin: mmc0_cd_pin@0 {
+				allwinner,pins = "PF6";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc1_pins: mmc1@0 {
+				allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+						 "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc2_pins: mmc2@0 {
+				allwinner,pins = "PC1", "PC5", "PC6", "PC8",
+						 "PC9", "PC10";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ahb_rst: reset@01c202c0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-ahb1-reset";
+			reg = <0x01c202c0 0xc>;
+		};
+
+		apb1_rst: reset@01c202d0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d0 0x4>;
+		};
+
+		apb2_rst: reset@01c202d8 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d8 0x4>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&bus_gates 112>;
+			resets = <&apb2_rst 16>;
+			reset-names = "apb2";
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&bus_gates 113>;
+			resets = <&apb2_rst 17>;
+			reset-names = "apb2";
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&bus_gates 114>;
+			resets = <&apb2_rst 18>;
+			reset-names = "apb2";
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&bus_gates 115>;
+			resets = <&apb2_rst 19>;
+			reset-names = "apb2";
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&bus_gates 116>;
+			resets = <&apb2_rst 20>;
+			reset-names = "apb2";
+			status = "disabled";
+		};
+
+		rtc: rtc@01f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	gic: interrupt-controller@{
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x01C81000 0x1000>,
+		      <0x01C82000 0x2000>,
+		      <0x01C84000 0x2000>,
+		      <0x01C86000 0x2000>;
+		interrupts = <GIC_PPI 9
+		      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+};

arch/arm/dts/pine64.dts

@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x45000000 0x00200000;
+/memreserve/ 0x41010000 0x00010800;
+/memreserve/ 0x40100000 0x00006000;
+
+#include "pine64_common.dtsi"
+
+/ {
+	model = "Pine64";
+	compatible = "pine64,pine64", "allwinner,a64";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x40000000 0x20000000>;
+	};
+};

arch/arm/dts/pine64_common.dtsi

@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "a64.dtsi"
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>, <&mmc0_default_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 0>;
+	cd-inverted;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};

arch/arm/dts/pine64_plus.dts

@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x45000000 0x00200000;
+/memreserve/ 0x41010000 0x00010800;
+/memreserve/ 0x40100000 0x00006000;
+
+#include "pine64_common.dtsi"
+
+/ {
+	model = "Pine64+";
+	compatible = "pine64,pine64_plus", "allwinner,a64";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* There is a model with 2GB of DRAM, but U-Boot fixes this for us. */
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+};

arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts

@@ -57,8 +57,20 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_b>;
 	status = "okay";
 };
+
+&usb_otg {
+	status = "okay";
+};

arch/arm/dts/sun8i-a83t-cubietruck-plus.dts

@@ -58,8 +58,20 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_b>;
 	status = "okay";
 };
+
+&usb_otg {
+	status = "okay";
+};

arch/arm/dts/sun8i-a83t.dtsi

@@ -224,5 +224,39 @@
 			#interrupt-cells = <3>;
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
+
+		usb_otg: usb@01c19000 {
+			compatible = "allwinner,sun8i-a33-musb";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun8i-a83t-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun8i-a83t-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ehci1: usb@01c1b000 {
+			compatible = "allwinner,sun8i-a83t-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@01f02c00 {
+			compatible = "allwinner,sun8i-a83t-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };

arch/arm/include/asm/arch-sunxi/clock.h

@@ -17,7 +17,8 @@
 /* clock control module regs definition */
 #if defined(CONFIG_MACH_SUN8I_A83T)
 #include <asm/arch/clock_sun8i_a83t.h>
-#elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I)
+#elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \
+      defined(CONFIG_MACH_SUN50I)
 #include <asm/arch/clock_sun6i.h>
 #elif defined(CONFIG_MACH_SUN9I)
 #include <asm/arch/clock_sun9i.h>

arch/arm/include/asm/arch-sunxi/clock_sun6i.h

@@ -350,10 +350,12 @@ struct sunxi_ccm_reg {
 #define CCM_HDMI_CTRL_DDC_GATE		(0x1 << 30)
 #define CCM_HDMI_CTRL_GATE		(0x1 << 31)
 
-#ifndef CONFIG_MACH_SUN8I
-#define MBUS_CLK_DEFAULT		0x81000001 /* PLL6 / 2 */
-#else
+#if defined(CONFIG_MACH_SUN50I)
+#define MBUS_CLK_DEFAULT		0x81000002 /* PLL6x2 / 3 */
+#elif defined(CONFIG_MACH_SUN8I)
 #define MBUS_CLK_DEFAULT		0x81000003 /* PLL6 / 4 */
+#else
+#define MBUS_CLK_DEFAULT		0x81000001 /* PLL6 / 2 */
 #endif
 #define MBUS_CLK_GATE			(0x1 << 31)
 

arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h

@@ -224,14 +224,14 @@ struct sunxi_ccm_reg {
 
 #define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
 #define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
-#define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
+#define CCM_USB_CTRL_HSIC_RST (0x1 << 2)
 /* There is no global phy clk gate on sun6i, define as 0 */
 #define CCM_USB_CTRL_PHYGATE 0
 #define CCM_USB_CTRL_PHY0_CLK (0x1 << 8)
 #define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
-#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
+#define CCM_USB_CTRL_HSIC_CLK (0x1 << 10)
+#define CCM_USB_CTRL_12M_CLK (0x1 << 11)
 #define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
-#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17)
 
 #define CCM_GMAC_CTRL_TX_CLK_SRC_MII	0x0
 #define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1

arch/arm/include/asm/arch-sunxi/gpio.h

@@ -159,6 +159,7 @@ enum sunxi_gpio_number {
 #define SUN8I_GPB_UART2		2
 #define SUN8I_A33_GPB_UART0	3
 #define SUN8I_A83T_GPB_UART0	2
+#define SUN50I_GPB_UART0	4
 
 #define SUNXI_GPC_NAND		2
 #define SUNXI_GPC_SDC2		3

arch/arm/include/asm/arch-sunxi/spl.h

@@ -12,8 +12,11 @@
 #define SPL_SIGNATURE		"SPL" /* marks "sunxi" SPL header */
 #define SPL_HEADER_VERSION	1
 
-/* Note: A80 will require special handling here: SPL_ADDR 0x10000 */
+#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
+#define SPL_ADDR		0x10000
+#else
 #define SPL_ADDR		0x0
+#endif
 
 /* boot head definition from sun4i boot code */
 struct boot_file_head {

arch/arm/mach-sunxi/Makefile

@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+#
+# Based on some other Makefile
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= board.o
+obj-y	+= clock.o
+obj-y	+= cpu_info.o
+obj-y	+= dram_helpers.o
+obj-y	+= pinmux.o
+ifndef CONFIG_MACH_SUN9I
+obj-y	+= usb_phy.o
+endif
+obj-$(CONFIG_MACH_SUN6I)	+= prcm.o
+obj-$(CONFIG_MACH_SUN8I)	+= prcm.o
+obj-$(CONFIG_MACH_SUN9I)	+= prcm.o
+obj-$(CONFIG_MACH_SUN6I)	+= p2wi.o
+obj-$(CONFIG_MACH_SUN8I)	+= rsb.o
+obj-$(CONFIG_MACH_SUN9I)	+= rsb.o
+obj-$(CONFIG_MACH_SUN4I)	+= clock_sun4i.o
+obj-$(CONFIG_MACH_SUN5I)	+= clock_sun4i.o
+obj-$(CONFIG_MACH_SUN6I)	+= clock_sun6i.o
+obj-$(CONFIG_MACH_SUN7I)	+= clock_sun4i.o
+obj-$(CONFIG_MACH_SUN50I)	+= clock_sun6i.o
+ifdef CONFIG_MACH_SUN8I_A83T
+obj-y				+= clock_sun8i_a83t.o
+else
+obj-$(CONFIG_MACH_SUN8I)	+= clock_sun6i.o
+endif
+obj-$(CONFIG_MACH_SUN9I)	+= clock_sun9i.o
+
+obj-$(CONFIG_AXP152_POWER)	+= pmic_bus.o
+obj-$(CONFIG_AXP209_POWER)	+= pmic_bus.o
+obj-$(CONFIG_AXP221_POWER)	+= pmic_bus.o
+obj-$(CONFIG_AXP818_POWER)	+= pmic_bus.o
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i.o
+obj-$(CONFIG_MACH_SUN5I)	+= dram_sun4i.o
+obj-$(CONFIG_MACH_SUN6I)	+= dram_sun6i.o
+obj-$(CONFIG_MACH_SUN7I)	+= dram_sun4i.o
+obj-$(CONFIG_MACH_SUN8I_A23)	+= dram_sun8i_a23.o
+obj-$(CONFIG_MACH_SUN8I_A33)	+= dram_sun8i_a33.o
+obj-$(CONFIG_MACH_SUN8I_A83T)	+= dram_sun8i_a83t.o
+obj-$(CONFIG_MACH_SUN8I_H3)	+= dram_sun8i_h3.o
+endif

arch/arm/mach-sunxi/board.c

@@ -40,6 +40,30 @@ struct fel_stash {
 
 struct fel_stash fel_stash __attribute__((section(".data")));
 
+#ifdef CONFIG_MACH_SUN50I
+#include <asm/armv8/mmu.h>
+
+static struct mm_region sunxi_mem_map[] = {
+	{
+		/* SRAM, MMIO regions */
+		.base = 0x0UL,
+		.size = 0x40000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE
+	}, {
+		/* RAM */
+		.base = 0x40000000UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+struct mm_region *mem_map = sunxi_mem_map;
+#endif
+
 static int gpio_init(void)
 {
 #if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
@@ -76,6 +100,10 @@ static int gpio_init(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
 	sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN50I_GPB_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN50I_GPB_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP);
 #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T)
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);
@@ -120,18 +148,30 @@ void s_init(void)
 	 */
 #if defined CONFIG_MACH_SUN6I
 	setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
-#elif defined CONFIG_MACH_SUN8I_A23
-	uint version;
+#elif defined CONFIG_MACH_SUN8I
+	__maybe_unused uint version;
 
 	/* Unlock sram version info reg, read it, relock */
 	setbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
-	version = readl(SUNXI_SRAMC_BASE + 0x24);
+	version = readl(SUNXI_SRAMC_BASE + 0x24) >> 16;
 	clrbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
 
-	if ((version & 0xffff0000) == 0x16500000)
+	/*
+	 * Ideally this would be a switch case, but we do not know exactly
+	 * which versions there are and which version needs which settings,
+	 * so reproduce the per SoC code from the BSP.
+	 */
+#if defined CONFIG_MACH_SUN8I_A23
+	if (version == 0x1650)
 		setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
 	else /* 0x1661 ? */
 		setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0);
+#elif defined CONFIG_MACH_SUN8I_A33
+	if (version != 0x1667)
+		setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0);
+#endif
+	/* A83T BSP never modifies SUNXI_SRAMC_BASE + 0x44 */
+	/* No H3 BSP, boot0 seems to not modify SUNXI_SRAMC_BASE + 0x44 */
 #endif
 
 #if defined CONFIG_MACH_SUN6I || \
@@ -253,7 +293,7 @@ void reset_cpu(ulong addr)
 #endif
 }
 
-#ifndef CONFIG_SYS_DCACHE_OFF
+#if !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_ARM64)
 void enable_caches(void)
 {
 	/* Enable D-cache. I-cache is already enabled in start.S */

arch/arm/mach-sunxi/cpu_info.c

@@ -38,6 +38,20 @@ int sunxi_get_ss_bonding_id(void)
 }
 #endif
 
+#ifdef CONFIG_MACH_SUN8I
+uint sunxi_get_sram_id(void)
+{
+	uint id;
+
+	/* Unlock sram info reg, read it, relock */
+	setbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
+	id = readl(SUNXI_SRAMC_BASE + 0x24) >> 16;
+	clrbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
+
+	return id;
+}
+#endif
+
 #ifdef CONFIG_DISPLAY_CPUINFO
 int print_cpuinfo(void)
 {
@@ -66,15 +80,17 @@ int print_cpuinfo(void)
 #elif defined CONFIG_MACH_SUN7I
 	puts("CPU:   Allwinner A20 (SUN7I)\n");
 #elif defined CONFIG_MACH_SUN8I_A23
-	puts("CPU:   Allwinner A23 (SUN8I)\n");
+	printf("CPU:   Allwinner A23 (SUN8I %04x)\n", sunxi_get_sram_id());
 #elif defined CONFIG_MACH_SUN8I_A33
-	puts("CPU:   Allwinner A33 (SUN8I)\n");
+	printf("CPU:   Allwinner A33 (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_A83T
+	printf("CPU:   Allwinner A83T (SUN8I %04x)\n", sunxi_get_sram_id());
 #elif defined CONFIG_MACH_SUN8I_H3
-	puts("CPU:   Allwinner H3 (SUN8I)\n");
+	printf("CPU:   Allwinner H3 (SUN8I %04x)\n", sunxi_get_sram_id());
 #elif defined CONFIG_MACH_SUN9I
 	puts("CPU:   Allwinner A80 (SUN9I)\n");
-#elif defined CONFIG_MACH_SUN8I_A83T
-	puts("CPU:   Allwinner A83T (SUN8I)\n");
+#elif defined CONFIG_MACH_SUN50I
+	puts("CPU:   Allwinner A64 (SUN50I)\n");
 #else
 #warning Please update cpu_info.c with correct CPU information
 	puts("CPU:   SUNXI Family\n");
@@ -91,7 +107,7 @@ int sunxi_get_sid(unsigned int *sid)
 	int i;
 
 	for (i = 0; i< 4; i++)
-		sid[i] = readl(SUNXI_SID_BASE + 4 * i);
+		sid[i] = readl((ulong)SUNXI_SID_BASE + 4 * i);
 
 	return 0;
 #else

arch/arm/mach-sunxi/dram_helpers.c

@@ -30,8 +30,8 @@ bool mctl_mem_matches(u32 offset)
 {
 	/* Try to write different values to RAM at two addresses */
 	writel(0, CONFIG_SYS_SDRAM_BASE);
-	writel(0xaa55aa55, CONFIG_SYS_SDRAM_BASE + offset);
+	writel(0xaa55aa55, (ulong)CONFIG_SYS_SDRAM_BASE + offset);
 	/* Check if the same value is actually observed when reading back */
 	return readl(CONFIG_SYS_SDRAM_BASE) ==
-	       readl(CONFIG_SYS_SDRAM_BASE + offset);
+	       readl((ulong)CONFIG_SYS_SDRAM_BASE + offset);
 }

arch/arm/mach-sunxi/usb_phy.c

@@ -34,6 +34,16 @@
 #define REG_PHY_UNK_H3			0x420
 #define REG_PMU_UNK_H3			0x810
 
+/* A83T specific control bits for PHY0 */
+#define SUNXI_PHY_CTL_VBUSVLDEXT	BIT(5)
+#define SUNXI_PHY_CTL_SIDDQ		BIT(3)
+
+/* A83T HSIC specific bits */
+#define SUNXI_EHCI_HS_FORCE		BIT(20)
+#define SUNXI_EHCI_CONNECT_DET		BIT(17)
+#define SUNXI_EHCI_CONNECT_INT		BIT(16)
+#define SUNXI_EHCI_HSIC			BIT(1)
+
 static struct sunxi_usb_phy {
 	int usb_rst_mask;
 	int gpio_vbus;
@@ -42,7 +52,7 @@ static struct sunxi_usb_phy {
 	int id;
 	int init_count;
 	int power_on_count;
-	int base;
+	ulong base;
 } sunxi_usb_phy[] = {
 	{
 		.usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
@@ -56,7 +66,12 @@ static struct sunxi_usb_phy {
 	},
 #if CONFIG_SUNXI_USB_PHYS >= 3
 	{
+#ifdef CONFIG_MACH_SUN8I_A83T
+		.usb_rst_mask = CCM_USB_CTRL_HSIC_RST | CCM_USB_CTRL_HSIC_CLK |
+				CCM_USB_CTRL_12M_CLK,
+#else
 		.usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
+#endif
 		.id = 2,
 		.base = SUNXI_USB2_BASE,
 	},
@@ -97,8 +112,8 @@ static int get_id_detect_gpio(int index)
 	return -EINVAL;
 }
 
-static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
-			  int data, int len)
+__maybe_unused static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
+					 int data, int len)
 {
 	int j = 0, usbc_bit = 0;
 	void *dest = (void *)SUNXI_USB0_BASE + SUNXI_USB_CSR;
@@ -137,6 +152,10 @@ static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
 
 	clrbits_le32(phy->base + REG_PMU_UNK_H3, 0x02);
 }
+#elif defined CONFIG_MACH_SUN8I_A83T
+static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
+{
+}
 #else
 static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
 {
@@ -174,6 +193,13 @@ static void sunxi_usb_phy_passby(struct sunxi_usb_phy *phy, int enable)
 		SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
 		SUNXI_EHCI_ULPI_BYPASS_EN;
 
+#ifdef CONFIG_MACH_SUN8I_A83T
+	if (phy->id == 2)
+		bits |= SUNXI_EHCI_HS_FORCE |
+			SUNXI_EHCI_CONNECT_INT |
+			SUNXI_EHCI_HSIC;
+#endif
+
 	if (enable)
 		setbits_le32(addr, bits);
 	else
@@ -184,9 +210,11 @@ static void sunxi_usb_phy_passby(struct sunxi_usb_phy *phy, int enable)
 
 void sunxi_usb_phy_enable_squelch_detect(int index, int enable)
 {
+#ifndef CONFIG_MACH_SUN8I_A83T
 	struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
 
 	usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2);
+#endif
 }
 
 void sunxi_usb_phy_init(int index)
@@ -204,6 +232,15 @@ void sunxi_usb_phy_init(int index)
 
 	if (phy->id != 0)
 		sunxi_usb_phy_passby(phy, SUNXI_USB_PASSBY_EN);
+
+#ifdef CONFIG_MACH_SUN8I_A83T
+	if (phy->id == 0) {
+		setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
+			     SUNXI_PHY_CTL_VBUSVLDEXT);
+		clrbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
+			     SUNXI_PHY_CTL_SIDDQ);
+	}
+#endif
 }
 
 void sunxi_usb_phy_exit(int index)
@@ -218,6 +255,13 @@ void sunxi_usb_phy_exit(int index)
 	if (phy->id != 0)
 		sunxi_usb_phy_passby(phy, !SUNXI_USB_PASSBY_EN);
 
+#ifdef CONFIG_MACH_SUN8I_A83T
+	if (phy->id == 0) {
+		setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
+			     SUNXI_PHY_CTL_SIDDQ);
+	}
+#endif
+
 	clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
 }