mirror of
https://xff.cz/git/u-boot/
synced 2025-11-02 03:17:29 +01:00
board: rockchip: Add support for rk3588s based Cool Pi 4B
CoolPi 4B is a rk3588s based SBC. Specification: - Rockchip RK3588S - LPDDR4 2/4/8/16 GB - TF scard slot - eMMC 8/32/64/128 GB module - SPI Nor 8MB - Gigabit ethernet drived by PCIE with RTL8111HS - HDMI Type D out - Mini DP out - USB 2.0 Host x 2 - USB 3.0 OTG x 1 - USB 3.0 Host x 1 - WIFI/BT module AIC8800 - 40 pin header The dts is from linux-6.8 rc1. Signed-off-by: Andy Yan <andyshrk@163.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> [0]https://patchwork.kernel.org/project/linux-rockchip/patch/2450634.jE0xQCEvom@phil/
This commit is contained in:
Andy Yan
Kever Yang
@@ -191,6 +191,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \
|
||||
rk3568-rock-3a.dtb
|
||||
|
||||
dtb-$(CONFIG_ROCKCHIP_RK3588) += \
|
||||
rk3588s-coolpi-4b.dts \
|
||||
rk3588-edgeble-neu6a-io.dtb \
|
||||
rk3588-edgeble-neu6b-io.dtb \
|
||||
rk3588-evb1-v10.dtb \
|
||||
|
||||
29
arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi
Normal file
29
arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi
Normal file
@@ -0,0 +1,29 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
#include "rk3588s-u-boot.dtsi"
|
||||
|
||||
&fspim2_pins {
|
||||
bootph-all;
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
};
|
||||
|
||||
&sfc {
|
||||
bootph-pre-ram;
|
||||
u-boot,spl-sfc-no-dma;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fspim2_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
bootph-pre-ram;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <24000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
812
arch/arm/dts/rk3588s-coolpi-4b.dts
Normal file
812
arch/arm/dts/rk3588s-coolpi-4b.dts
Normal file
@@ -0,0 +1,812 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
* https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3588s.dtsi"
|
||||
|
||||
/ {
|
||||
model = "RK3588S CoolPi 4 Model B";
|
||||
compatible = "coolpi,pi-4b", "rockchip,rk3588s";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
mmc2 = &sdio;
|
||||
};
|
||||
|
||||
analog-sound {
|
||||
compatible = "audio-graph-card";
|
||||
dais = <&i2s0_8ch_p0>;
|
||||
label = "rk3588-es8316";
|
||||
routing = "MIC2", "Mic Jack",
|
||||
"Headphones", "HPOL",
|
||||
"Headphones", "HPOR";
|
||||
widgets = "Microphone", "Mic Jack",
|
||||
"Headphone", "Headphones";
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_leds>;
|
||||
|
||||
led0: led-green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led1: led-red {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_WLAN;
|
||||
gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy0tx";
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&hym8563>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
post-power-on-delay-ms = <200>;
|
||||
reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usbdcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usbdcin>;
|
||||
};
|
||||
|
||||
avdd0v85_pcie20: avdd0v85-pcie20-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "avdd0v85_pcie20";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
vin-supply = <&vdd_0v85_s0>;
|
||||
};
|
||||
|
||||
avdd1v8_pcie20: avdd1v8-pcie20-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "avdd1v8_pcie20";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&avcc_1v8_s0>;
|
||||
};
|
||||
|
||||
vcc3v3_mipi: vcc3v3-mipi-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc3v3_mipi";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_otg: vcc5v0-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_u3host_en>;
|
||||
regulator-name = "vcc5v0_otg";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
pinctrl-0 = <&i2c6m3_xfer>;
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
pinctrl-0 = <&i2c7m0_xfer>;
|
||||
status = "okay";
|
||||
|
||||
es8316: audio-codec@11 {
|
||||
compatible = "everest,es8316";
|
||||
reg = <0x11>;
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
clock-names = "mclk";
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
port {
|
||||
es8316_p0_0: endpoint {
|
||||
remote-endpoint = <&i2s0_8ch_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
|
||||
i2s0_8ch_p0: port {
|
||||
i2s0_8ch_p0_0: endpoint {
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
remote-endpoint = <&es8316_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtl8111_isolate>;
|
||||
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
led {
|
||||
gpio_leds: gpio-leds {
|
||||
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>,
|
||||
<0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
rtl8111 {
|
||||
rtl8111_isolate: rtl8111-isolate {
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
vcc5v0_u3host_en: vcc5v0-u3host-en {
|
||||
rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
bt_reset_gpio: bt-reset-pin {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_gpio: bt-wake-pin {
|
||||
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_host_irq: bt-wake-host-irq {
|
||||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
wifi_host_wake_irq: wifi-host-wake-irq {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
wifi_poweren_pin: wifi-poweren-pin {
|
||||
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
pinctrl-0 = <&pwm2m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm13 {
|
||||
pinctrl-names = "active";
|
||||
pinctrl-0 = <&pwm13m2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
max-frequency = <150000000>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
no-sd;
|
||||
no-mmc;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdiom1_pins>,<&wifi_poweren_pin>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
status = "okay";
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
spi-max-frequency = <1000000>;
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-name = "vdd_log_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-name = "vccio_sd_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-name = "pldo6_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* bt */
|
||||
&uart9 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -1,3 +1,10 @@
|
||||
COOLPI-4B-RK3588S
|
||||
M: Andy Yan <andyshrk@163.com>
|
||||
S: Maintained
|
||||
F: configs/coolpi-4b-rk3588s_defconfig
|
||||
F: arch/arm/dts/rk3588s-coolpi-4b.dts
|
||||
F: arch/arm/dts/rk3588s-coolpi-u-boot.dtsi
|
||||
|
||||
EVB-RK3588
|
||||
M: Kever Yang <kever.yang@rock-chips.com>
|
||||
S: Maintained
|
||||
|
||||
113
configs/coolpi-4b-rk3588s_defconfig
Normal file
113
configs/coolpi-4b-rk3588s_defconfig
Normal file
@@ -0,0 +1,113 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SKIP_LOWLEVEL_INIT=y
|
||||
CONFIG_COUNTER_FREQUENCY=24000000
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_TEXT_BASE=0x00a00000
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_NR_DRAM_BANKS=2
|
||||
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
||||
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
|
||||
CONFIG_SF_DEFAULT_SPEED=24000000
|
||||
CONFIG_SF_DEFAULT_MODE=0x2000
|
||||
CONFIG_DEFAULT_DEVICE_TREE="rk3588s-coolpi-4b"
|
||||
CONFIG_ROCKCHIP_RK3588=y
|
||||
CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
|
||||
CONFIG_ROCKCHIP_SPI_IMAGE=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL_STACK_R_ADDR=0x600000
|
||||
CONFIG_TARGET_EVB_RK3588=y
|
||||
CONFIG_SPL_STACK=0x400000
|
||||
CONFIG_DEBUG_UART_BASE=0xFEB50000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI=y
|
||||
CONFIG_SYS_LOAD_ADDR=0xc00800
|
||||
CONFIG_PCI=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_AHCI=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_VERBOSE=y
|
||||
CONFIG_SPL_FIT_SIGNATURE=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_LEGACY_IMAGE_FORMAT=y
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-coolpi-4b.dtb"
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
CONFIG_SPL_MAX_SIZE=0x40000
|
||||
CONFIG_SPL_PAD_TO=0x7f8000
|
||||
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
||||
CONFIG_SPL_BSS_START_ADDR=0x4000000
|
||||
CONFIG_SPL_BSS_MAX_SIZE=0x4000
|
||||
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
|
||||
CONFIG_SPL_STACK_R=y
|
||||
CONFIG_SPL_SPI_LOAD=y
|
||||
CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
|
||||
CONFIG_SPL_ATF=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_PCI=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_LIVE=y
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_SPL_REGMAP=y
|
||||
CONFIG_SPL_SYSCON=y
|
||||
CONFIG_AHCI_PCI=y
|
||||
CONFIG_DWC_AHCI=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_ROCKCHIP_GPIO=y
|
||||
CONFIG_SYS_I2C_ROCKCHIP=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_SUPPORT_EMMC_RPMB=y
|
||||
CONFIG_MMC_IO_VOLTAGE=y
|
||||
CONFIG_SPL_MMC_IO_VOLTAGE=y
|
||||
CONFIG_MMC_UHS_SUPPORT=y
|
||||
CONFIG_SPL_MMC_UHS_SUPPORT=y
|
||||
CONFIG_MMC_HS400_ES_SUPPORT=y
|
||||
CONFIG_SPL_MMC_HS400_ES_SUPPORT=y
|
||||
CONFIG_MMC_HS400_SUPPORT=y
|
||||
CONFIG_SPL_MMC_HS400_SUPPORT=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_ROCKCHIP=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_SDMA=y
|
||||
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
||||
CONFIG_SF_DEFAULT_BUS=5
|
||||
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
|
||||
CONFIG_SPI_FLASH_XMC=y
|
||||
CONFIG_SPI_FLASH_XTX=y
|
||||
CONFIG_PHY_MOTORCOMM=y
|
||||
CONFIG_DWC_ETH_QOS=y
|
||||
CONFIG_DWC_ETH_QOS_ROCKCHIP=y
|
||||
CONFIG_NVME_PCI=y
|
||||
CONFIG_PCIE_DW_ROCKCHIP=y
|
||||
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
||||
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
|
||||
CONFIG_PHY_ROCKCHIP_USBDP=y
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
CONFIG_PWM_ROCKCHIP=y
|
||||
CONFIG_SPL_RAM=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BAUDRATE=1500000
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_SYS_NS16550_MEM32=y
|
||||
CONFIG_ROCKCHIP_SFC=y
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_GENERIC=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_GENERIC=y
|
||||
CONFIG_USB_DWC3=y
|
||||
CONFIG_USB_DWC3_GENERIC=y
|
||||
CONFIG_ERRNO_STR=y
|
||||
Reference in New Issue
Block a user