malloc_f: enable SYS_MALLOC_F by default if DM is on

This option has a bool type, not hex. Fix it and enable it if CONFIG_DM is on because Driver Model always requires malloc memory. Devices are scanned twice, before/after relocation. CONFIG_SYS_MALLOC_F should be enabled to use malloc memory before relocation. As it is board-independent, handle it globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Robert Baldyga <r.baldyga@samsung.com>
2025-10-31 10:26:10 +01:00 · 2015-03-19 19:42:55 +09:00
parent 91405b7fa9
commit 326a682358
30 changed files with 1 additions and 46 deletions
--- a/2
+++ b/2
@@ -54,7 +54,7 @@ config CC_OPTIMIZE_FOR_SIZE

 config SYS_MALLOC_F
 	bool "Enable malloc() pool before relocation"
-	default 0x400
+	default y if DM
 	help
 	  Before relocation memory is very limited on many platforms. Still,
 	  we can provide a small malloc() pool if needed. Driver model in
--- a/arch/arm/cpu/armv7/exynos/Kconfig
+++ b/arch/arm/cpu/armv7/exynos/Kconfig
@@ -80,9 +80,6 @@ config DM_SPI_FLASH
 config DM_GPIO
 	default y

-config SYS_MALLOC_F
-	default y
-
 source "board/samsung/smdkv310/Kconfig"
 source "board/samsung/trats/Kconfig"
 source "board/samsung/universal_c210/Kconfig"
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -106,9 +106,6 @@ config DM_GPIO
 config DM_SERIAL
 	default y if DM

-config SYS_MALLOC_F
-	default y if DM
-
 config SYS_SOC
 	default "omap3"

--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -17,9 +17,6 @@ config TEGRA124

 endchoice

-config SYS_MALLOC_F
-	default y
-
 config SYS_MALLOC_F_LEN
 	default 0x1800

--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -45,9 +45,6 @@ config DCC_MICRO_SUPPORT_CARD

 endchoice

-config SYS_MALLOC_F
-	default y
-
 config CMD_PINMON
 	bool "Enable boot mode pins monitor command"
 	default y
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -76,9 +76,6 @@ config DM_GPIO
 config DM_SERIAL
 	default y

-config SYS_MALLOC_F
-	default y
-
 config SYS_MALLOC_F_LEN
 	default 0x800

--- a/board/amcc/canyonlands/Kconfig
+++ b/board/amcc/canyonlands/Kconfig
@@ -39,8 +39,4 @@ config DM
 config DM_SERIAL
 	default y

-config SYS_MALLOC_F
-	bool
-	default y
-
 endif
--- a/board/ti/am335x/Kconfig
+++ b/board/ti/am335x/Kconfig
@@ -47,7 +47,4 @@ config DM_GPIO
 config DM_SERIAL
 	default y if DM

-config SYS_MALLOC_F
-	default y if DM
-
 endif
--- a/configs/Linksprite_pcDuino3_fdt_defconfig
+++ b/configs/Linksprite_pcDuino3_fdt_defconfig
@@ -13,4 +13,3 @@ CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=480
 CONFIG_DRAM_ZQ=122
 CONFIG_DRAM_EMR1=4
-CONFIG_SYS_MALLOC_F=y
--- a/configs/am335x_igep0033_defconfig
+++ b/configs/am335x_igep0033_defconfig
@@ -3,4 +3,3 @@ CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_ARM=y
 CONFIG_TARGET_AM335X_IGEP0033=y
-CONFIG_SYS_MALLOC_F=y
--- a/configs/cm_fx6_defconfig
+++ b/configs/cm_fx6_defconfig
@@ -5,4 +5,3 @@ CONFIG_TARGET_CM_FX6=y
 CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_SERIAL=y
-CONFIG_SYS_MALLOC_F=y
--- a/configs/cm_t335_defconfig
+++ b/configs/cm_t335_defconfig
@@ -1,4 +1,3 @@
 CONFIG_SPL=y
 CONFIG_ARM=y
 CONFIG_TARGET_CM_T335=y
-CONFIG_SYS_MALLOC_F=y
--- a/configs/mx6dlsabreauto_defconfig
+++ b/configs/mx6dlsabreauto_defconfig
@@ -1,6 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QSABREAUTO=y
-CONFIG_SYS_MALLOC_F=y
 CONFIG_DM=y
 CONFIG_DM_THERMAL=y
--- a/configs/mx6qsabreauto_defconfig
+++ b/configs/mx6qsabreauto_defconfig
@@ -1,6 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QSABREAUTO=y
-CONFIG_SYS_MALLOC_F=y
 CONFIG_DM=y
 CONFIG_DM_THERMAL=y
--- a/configs/mx6qsabresd_defconfig
+++ b/configs/mx6qsabresd_defconfig
@@ -1,6 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SABRESD=y
-CONFIG_SYS_MALLOC_F=y
 CONFIG_DM=y
 CONFIG_DM_THERMAL=y
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -1,6 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SXSABRESD=y
-CONFIG_SYS_MALLOC_F=y
 CONFIG_DM=y
 CONFIG_DM_THERMAL=y
--- a/configs/nokia_rx51_defconfig
+++ b/configs/nokia_rx51_defconfig
@@ -4,4 +4,3 @@ CONFIG_TARGET_NOKIA_RX51=y
 CONFIG_DM=n
 CONFIG_DM_SERIAL=n
 CONFIG_DM_GPIO=n
-CONFIG_SYS_MALLOC_F=y
--- a/configs/pcm051_rev1_defconfig
+++ b/configs/pcm051_rev1_defconfig
@@ -2,4 +2,3 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="REV1"
 CONFIG_ARM=y
 CONFIG_TARGET_PCM051=y
-CONFIG_SYS_MALLOC_F=y
--- a/configs/pcm051_rev3_defconfig
+++ b/configs/pcm051_rev3_defconfig
@@ -2,4 +2,3 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="REV3"
 CONFIG_ARM=y
 CONFIG_TARGET_PCM051=y
-CONFIG_SYS_MALLOC_F=y
--- a/configs/pengwyn_defconfig
+++ b/configs/pengwyn_defconfig
@@ -1,4 +1,3 @@
 CONFIG_SPL=y
 CONFIG_ARM=y
 CONFIG_TARGET_PENGWYN=y
-CONFIG_SYS_MALLOC_F=y
--- a/configs/pepper_defconfig
+++ b/configs/pepper_defconfig
@@ -1,4 +1,3 @@
 CONFIG_SPL=y
 CONFIG_ARM=y
 CONFIG_TARGET_PEPPER=y
-CONFIG_SYS_MALLOC_F=y
--- a/configs/rpi_2_defconfig
+++ b/configs/rpi_2_defconfig
@@ -1,3 +1,2 @@
 CONFIG_ARM=y
 CONFIG_TARGET_RPI_2=y
-CONFIG_SYS_MALLOC_F=y
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -1,3 +1,2 @@
 CONFIG_ARM=y
 CONFIG_TARGET_RPI=y
-CONFIG_SYS_MALLOC_F=y
--- a/configs/s5p_goni_defconfig
+++ b/configs/s5p_goni_defconfig
@@ -2,4 +2,3 @@ CONFIG_ARM=y
 CONFIG_ARCH_S5PC1XX=y
 CONFIG_TARGET_S5P_GONI=y
 CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni"
-CONFIG_SYS_MALLOC_F=y
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -5,7 +5,6 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_DM=y
 CONFIG_DEFAULT_DEVICE_TREE="sandbox"
-CONFIG_SYS_MALLOC_F=y
 CONFIG_CROS_EC=y
 CONFIG_DM_CROS_EC=y
 CONFIG_CROS_EC_SANDBOX=y
--- a/configs/smdkc100_defconfig
+++ b/configs/smdkc100_defconfig
@@ -2,4 +2,3 @@ CONFIG_ARM=y
 CONFIG_TARGET_SMDKC100=y
 CONFIG_ARCH_S5PC1XX=y
 CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
-CONFIG_SYS_MALLOC_F=y
--- a/configs/snapper9260_defconfig
+++ b/configs/snapper9260_defconfig
@@ -5,4 +5,3 @@ CONFIG_TARGET_SNAPPER9260=y
 CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_SERIAL=y
-CONFIG_SYS_MALLOC_F=y
--- a/configs/snapper9g20_defconfig
+++ b/configs/snapper9g20_defconfig
@@ -5,4 +5,3 @@ CONFIG_TARGET_SNAPPER9260=y
 CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_SERIAL=y
-CONFIG_SYS_MALLOC_F=y
--- a/configs/stv0991_defconfig
+++ b/configs/stv0991_defconfig
@@ -1,7 +1,6 @@
 CONFIG_SYS_EXTRA_OPTIONS="stv0991"
 CONFIG_ARM=y
 CONFIG_TARGET_STV0991=y
-CONFIG_SYS_MALLOC_F=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_DM=y
 CONFIG_DM_SERIAL=y
--- a/include/configs/rcar-gen2-common.h
+++ b/include/configs/rcar-gen2-common.h
@@ -35,8 +35,6 @@
 #define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_SYS_GENERIC_BOARD

-#define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
-
 /* Support File sytems */
 #define CONFIG_FAT_WRITE
 #define CONFIG_DOS_PARTITION