Merge branch '2024-05-02-assorted-updates'

- Typo fixes, gpt command fix, a few npcm fixes, fix a reported Coverity
  issue and increase the malloc pool on am62x_evm_r5 to fix some use
  cases.

MAINTAINERS

@@ -224,7 +224,6 @@ ARM BROADCOM BCMBCA
 M:	Anand Gore <anand.gore@broadcom.com>
 M:	William Zhang <william.zhang@broadcom.com>
 M:	Kursad Oney <kursad.oney@broadcom.com>
-M:	Joel Peshkin <joel.peshkin@broadcom.com>
 M:	Philippe Reynes <philippe.reynes@softathome.com>
 S:	Maintained
 F:	arch/arm/mach-bcmbca/
@@ -1568,7 +1567,7 @@ F:	cmd/sqfs.c
 F:	test/py/tests/test_fs/test_squashfs/
 
 STACKPROTECTOR
-M:	Joel Peshkin <joel.peshkin@broadcom.com>
+M:	William Zhang <william.zhang@broadcom.com>
 S:	Maintained
 F:	common/stackprot.c
 F:	cmd/stackprot_test.c

board/nuvoton/arbel_evb/arbel_evb.c

@@ -27,6 +27,15 @@ int board_init(void)
 	return 0;
 }
 
+phys_size_t get_effective_memsize(void)
+{
+	/* Use bank0 only */
+	if (gd->ram_size > DRAM_2GB_SIZE)
+		return DRAM_2GB_SIZE;
+
+	return gd->ram_size;
+}
+
 int dram_init(void)
 {
 	struct npcm_gcr *gcr = (struct npcm_gcr *)NPCM_GCR_BA;
@@ -70,21 +79,16 @@ int dram_init_banksize(void)
 		gd->bd->bi_dram[1].start = DRAM_4GB_SIZE;
 		gd->bd->bi_dram[1].size = DRAM_2GB_SIZE -
 			(DRAM_4GB_SIZE - DRAM_4GB_ECC_SIZE);
-		/* use bank0 only */
-		gd->ram_size = DRAM_2GB_SIZE;
 		break;
 	case DRAM_4GB_SIZE:
 		gd->bd->bi_dram[0].size = DRAM_2GB_SIZE;
 		gd->bd->bi_dram[1].start = DRAM_4GB_SIZE;
 		gd->bd->bi_dram[1].size = DRAM_2GB_SIZE;
-		/* use bank0 only */
-		gd->ram_size = DRAM_2GB_SIZE;
 		break;
 	default:
 		gd->bd->bi_dram[0].size = DRAM_1GB_SIZE;
 		gd->bd->bi_dram[1].start = 0;
 		gd->bd->bi_dram[1].size = 0;
-		gd->ram_size = DRAM_1GB_SIZE;
 		break;
 	}
 

board/nuvoton/poleg_evb/poleg_evb.c

@@ -21,7 +21,6 @@ int board_init(void)
 
 int dram_init(void)
 {
-	char value[32];
 	struct npcm_gcr *gcr = (struct npcm_gcr *)NPCM_GCR_BA;
 
 	int ramsize = (readl(&gcr->intcr3) >> 8) & 0x7;
@@ -47,17 +46,31 @@ int dram_init(void)
 	break;
 	}
 
-	if (gd->ram_size > 0) {
-                sprintf(value, "%ldM", (gd->ram_size / 0x100000));
-                env_set("mem", value);
-        }
-
 	return 0;
 }
 
 int last_stage_init(void)
 {
+
+	char value[32];
+	struct udevice *dev = gd->cur_serial_dev;
+
+	if (gd->ram_size > 0) {
+		sprintf(value, "%ldM", (gd->ram_size / 0x100000));
+		env_set("mem", value);
+	}
+
+	if (dev && (dev->seq_ >= 0)) {
+		void *addr;
+		addr = dev_read_addr_ptr(dev);
+		if (addr) {
+			sprintf(value, "uart8250,mmio32,0x%x", (u32)addr);
+			env_set("earlycon", value);
+		}
+		sprintf(value, "ttyS%d,115200n8", dev->seq_);
+		env_set("console", value);
 		board_set_console();
+	}
 
 	return 0;
 }

cmd/gpt.c

@@ -643,6 +643,10 @@ static int gpt_default(struct blk_desc *blk_dev_desc, const char *str_part)
 	free(str_disk_guid);
 	free(partitions);
 
+	/* initialize partition table */
+	if (blk_enabled())
+		part_init(blk_dev_desc);
+
 	return ret;
 }
 

configs/am62x_evm_r5_defconfig

@@ -26,6 +26,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x43c3b000
 CONFIG_SPL_BSS_MAX_SIZE=0x3000
 CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x200000
 CONFIG_SPL_SIZE_LIMIT=0x3A7F0
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x3500
 CONFIG_SPL_FS_FAT=y

drivers/spi/npcm_pspi.c

@@ -7,6 +7,7 @@
 #include <dm.h>
 #include <spi.h>
 #include <clk.h>
+#include <reset.h>
 #include <asm/gpio.h>
 #include <linux/iopoll.h>
 
@@ -194,6 +195,7 @@ static int npcm_pspi_probe(struct udevice *bus)
 {
 	struct npcm_pspi_priv *priv = dev_get_priv(bus);
 	int node = dev_of_offset(bus);
+	struct reset_ctl reset;
 	int ret;
 
 	ret = clk_get_by_index(bus, 0, &priv->clk);
@@ -205,6 +207,14 @@ static int npcm_pspi_probe(struct udevice *bus)
 	gpio_request_by_name_nodev(offset_to_ofnode(node), "cs-gpios", 0,
 				   &priv->cs_gpio, GPIOD_IS_OUT| GPIOD_ACTIVE_LOW);
 
+	/* Reset HW */
+	ret = reset_get_by_index(bus, 0, &reset);
+	if (!ret) {
+		reset_assert(&reset);
+		udelay(5);
+		reset_deassert(&reset);
+	}
+
 	return 0;
 }
 

include/configs/arbel.h

@@ -7,7 +7,7 @@
 #define __CONFIG_ARBEL_H
 
 #define CFG_SYS_SDRAM_BASE		0x0
-#define CFG_SYS_BOOTMAPSZ		(128 << 20)
+#define CFG_SYS_BOOTMAPSZ		(192 << 20)
 #define CFG_SYS_BOOTM_LEN		(20 << 20)
 #define CFG_SYS_INIT_RAM_ADDR	CFG_SYS_SDRAM_BASE
 #define CFG_SYS_INIT_RAM_SIZE	0x8000

include/configs/poleg.h

@@ -30,9 +30,9 @@
 		"eth2addr=00:00:F7:A0:00:FE\0"    \
 		"eth3addr=00:00:F7:A0:00:FF\0"    \
 		"console=ttyS0,115200n8\0" \
-		"earlycon=uart8250,mmio32,0xf0000000\0" \
+		"earlycon=uart8250,mmio32,0xf0001000\0" \
 		"common_bootargs=setenv bootargs earlycon=${earlycon} root=/dev/ram "   \
-		"console=${console} mem=${mem} ramdisk_size=48000 basemac=${ethaddr}\0"    \
+		"console=${console} mem=${mem} ramdisk_size=48000 basemac=${ethaddr} oops=panic panic=20\0"    \
 		"sd_prog=fatload mmc 0 10000000 image-bmc; cp.b 10000000 80000000 ${filesize}\0"  \
 		"sd_run=fatload mmc 0 10000000 image-bmc; bootm 10200000\0"   \
 		"\0"

include/event.h

@@ -316,7 +316,7 @@ static inline const char *event_spy_id(struct evspy_info *spy)
 	__used ll_entry_declare(struct evspy_info, _type ## _3_ ## _func, \
 		evspy_info) = _ESPY_REC(_type, _func)
 
-/* Simple spy with no function arguemnts */
+/* Simple spy with no function arguments */
 #define EVENT_SPY_SIMPLE(_type, _func) \
 	__used ll_entry_declare(struct evspy_info_simple, \
 		_type ## _3_ ## _func, \

net/bootp.c

@@ -886,7 +886,7 @@ static void dhcp_process_options(uchar *popt, uchar *end)
 		case 40:	/* NIS Domain name */
 			if (net_nis_domain[0] == 0) {
 				size = truncate_sz("NIS Domain Name",
-					sizeof(net_nis_domain), size);
+					sizeof(net_nis_domain), oplen);
 				memcpy(&net_nis_domain, popt + 2, size);
 				net_nis_domain[size] = 0;
 			}

tools/binman/btool/mkimage.py

@@ -11,7 +11,7 @@ class Bintoolmkimage(bintool.Bintool):
     """Image generation for U-Boot
 
     This bintool supports running `mkimage` with some basic parameters as
-    neeed by binman.
+    needed by binman.
 
     Normally binman uses the mkimage built by U-Boot. But when run outside the
     U-Boot build system, binman can use the version installed in your system.

tools/buildman/test.py

@@ -195,7 +195,7 @@ class TestBuild(unittest.TestCase):
         Args:
             echo_lines: True to echo lines to the terminal to aid test
                 development
-            kwdisplay_args: Dict of arguemnts to pass to
+            kwdisplay_args: Dict of arguments to pass to
                 Builder.SetDisplayOptions()
 
         Returns: