mirror of
https://xff.cz/git/u-boot/
synced 2025-10-31 02:15:45 +01:00
powerpc/T4240EMU: Add T4240EMU target
Add emulator support for T4240. Emulator has limited peripherals and interfaces. Difference between emulator and T4240QDS includes: ECC for DDR is disabled due the procedure to load images No board FPGA (QIXIS) NOR flash has 32-bit port for higher loading speed IFC and I2C timing don't really matter, so set them fast No ethernet Signed-off-by: York Sun <yorksun@freescale.com>
This commit is contained in:
York Sun
@@ -472,6 +472,10 @@ Ira W. Snyder <iws@ovro.caltech.edu>
|
||||
|
||||
P2020COME P2020
|
||||
|
||||
York Sun <yorksun@freescale.com>
|
||||
|
||||
T4240EMU T4240
|
||||
|
||||
Timur Tabi <timur@freescale.com>
|
||||
|
||||
MPC8349E-mITX MPC8349
|
||||
|
||||
@@ -8,7 +8,8 @@ include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).o
|
||||
|
||||
COBJS-y += $(BOARD).o
|
||||
COBJS-$(CONFIG_T4240QDS) += t4240qds.o
|
||||
COBJS-$(CONFIG_T4240EMU) += t4240emu.o
|
||||
COBJS-y += ddr.o
|
||||
COBJS-$(CONFIG_T4240QDS)+= eth.o
|
||||
COBJS-$(CONFIG_PCI) += pci.o
|
||||
|
||||
@@ -13,81 +13,10 @@
|
||||
#include <asm/fsl_ddr_sdram.h>
|
||||
#include <asm/fsl_ddr_dimm_params.h>
|
||||
#include <asm/fsl_law.h>
|
||||
#include "ddr.h"
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
struct board_specific_parameters {
|
||||
u32 n_ranks;
|
||||
u32 datarate_mhz_high;
|
||||
u32 rank_gb;
|
||||
u32 clk_adjust;
|
||||
u32 wrlvl_start;
|
||||
u32 wrlvl_ctl_2;
|
||||
u32 wrlvl_ctl_3;
|
||||
u32 cpo;
|
||||
u32 write_data_delay;
|
||||
u32 force_2T;
|
||||
};
|
||||
|
||||
/*
|
||||
* This table contains all valid speeds we want to override with board
|
||||
* specific parameters. datarate_mhz_high values need to be in ascending order
|
||||
* for each n_ranks group.
|
||||
*/
|
||||
static const struct board_specific_parameters udimm0[] = {
|
||||
/*
|
||||
* memory controller 0
|
||||
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
|
||||
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
|
||||
*/
|
||||
{2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
|
||||
{2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0},
|
||||
{2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0},
|
||||
{2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0},
|
||||
{2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0},
|
||||
{2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0},
|
||||
{1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
|
||||
{1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
|
||||
{1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
|
||||
{1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
|
||||
{}
|
||||
};
|
||||
|
||||
/*
|
||||
* The three slots have slightly different timing. The center values are good
|
||||
* for all slots. We use identical speed tables for them. In future use, if
|
||||
* DIMMs require separated tables, make more entries as needed.
|
||||
*/
|
||||
static const struct board_specific_parameters *udimms[] = {
|
||||
udimm0,
|
||||
};
|
||||
|
||||
static const struct board_specific_parameters rdimm0[] = {
|
||||
/*
|
||||
* memory controller 0
|
||||
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
|
||||
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
|
||||
*/
|
||||
{4, 1350, 0, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0},
|
||||
{4, 1666, 0, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0},
|
||||
{4, 2140, 0, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0},
|
||||
{2, 1350, 0, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0},
|
||||
{2, 1666, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
|
||||
{2, 2140, 0, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
|
||||
{1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
|
||||
{1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
|
||||
{1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
|
||||
{1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
|
||||
{}
|
||||
};
|
||||
|
||||
/*
|
||||
* The three slots have slightly different timing. See comments above.
|
||||
*/
|
||||
static const struct board_specific_parameters *rdimms[] = {
|
||||
rdimm0,
|
||||
};
|
||||
|
||||
void fsl_ddr_board_options(memctl_options_t *popts,
|
||||
dimm_params_t *pdimm,
|
||||
unsigned int ctrl_num)
|
||||
|
||||
122
board/freescale/t4qds/ddr.h
Normal file
122
board/freescale/t4qds/ddr.h
Normal file
@@ -0,0 +1,122 @@
|
||||
/*
|
||||
* Copyright 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef __DDR_H__
|
||||
#define __DDR_H__
|
||||
struct board_specific_parameters {
|
||||
u32 n_ranks;
|
||||
u32 datarate_mhz_high;
|
||||
u32 rank_gb;
|
||||
u32 clk_adjust;
|
||||
u32 wrlvl_start;
|
||||
u32 wrlvl_ctl_2;
|
||||
u32 wrlvl_ctl_3;
|
||||
u32 cpo;
|
||||
u32 write_data_delay;
|
||||
u32 force_2T;
|
||||
};
|
||||
|
||||
/*
|
||||
* These tables contain all valid speeds we want to override with board
|
||||
* specific parameters. datarate_mhz_high values need to be in ascending order
|
||||
* for each n_ranks group.
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_T4240QDS
|
||||
static const struct board_specific_parameters udimm0[] = {
|
||||
/*
|
||||
* memory controller 0
|
||||
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
|
||||
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
|
||||
*/
|
||||
{2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
|
||||
{2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0},
|
||||
{2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0},
|
||||
{2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0},
|
||||
{2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0},
|
||||
{2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0},
|
||||
{1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
|
||||
{1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
|
||||
{1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
|
||||
{1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
|
||||
{}
|
||||
};
|
||||
|
||||
static const struct board_specific_parameters rdimm0[] = {
|
||||
/*
|
||||
* memory controller 0
|
||||
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
|
||||
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
|
||||
*/
|
||||
{4, 1350, 0, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0},
|
||||
{4, 1666, 0, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0},
|
||||
{4, 2140, 0, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0},
|
||||
{2, 1350, 0, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0},
|
||||
{2, 1666, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
|
||||
{2, 2140, 0, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
|
||||
{1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
|
||||
{1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
|
||||
{1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
|
||||
{1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
|
||||
{}
|
||||
};
|
||||
|
||||
#else /* CONFIG_T4240EMU */
|
||||
static const struct board_specific_parameters udimm0[] = {
|
||||
/*
|
||||
* memory controller 0
|
||||
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
|
||||
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
|
||||
*/
|
||||
{2, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0},
|
||||
{1, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0},
|
||||
{}
|
||||
};
|
||||
|
||||
static const struct board_specific_parameters rdimm0[] = {
|
||||
/*
|
||||
* memory controller 0
|
||||
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
|
||||
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
|
||||
*/
|
||||
{4, 2140, 0, 5, 8, 0x0, 0x0, 0xff, 2, 0},
|
||||
{2, 2140, 0, 5, 8, 0x0, 0x0, 0xff, 2, 0},
|
||||
{1, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0},
|
||||
{}
|
||||
};
|
||||
#endif /* CONFIG_T4240EMU */
|
||||
|
||||
/*
|
||||
* The three slots have slightly different timing. The center values are good
|
||||
* for all slots. We use identical speed tables for them. In future use, if
|
||||
* DIMMs require separated tables, make more entries as needed.
|
||||
*/
|
||||
static const struct board_specific_parameters *udimms[] = {
|
||||
udimm0,
|
||||
};
|
||||
|
||||
/*
|
||||
* The three slots have slightly different timing. See comments above.
|
||||
*/
|
||||
static const struct board_specific_parameters *rdimms[] = {
|
||||
rdimm0,
|
||||
};
|
||||
|
||||
|
||||
#endif
|
||||
@@ -19,7 +19,9 @@ struct law_entry law_table[] = {
|
||||
#ifdef CONFIG_SYS_QMAN_MEM_PHYS
|
||||
SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
|
||||
#endif
|
||||
#ifdef QIXIS_BASE_PHYS
|
||||
SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
|
||||
#endif
|
||||
#ifdef CONFIG_SYS_DCSRBAR_PHYS
|
||||
/* Limit DCSR to 32M to access NPC Trace Buffer */
|
||||
SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
|
||||
|
||||
96
board/freescale/t4qds/t4240emu.c
Normal file
96
board/freescale/t4qds/t4240emu.c
Normal file
@@ -0,0 +1,96 @@
|
||||
/*
|
||||
* Copyright 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <command.h>
|
||||
#include <i2c.h>
|
||||
#include <netdev.h>
|
||||
#include <linux/compiler.h>
|
||||
#include <asm/mmu.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/cache.h>
|
||||
#include <asm/immap_85xx.h>
|
||||
#include <asm/fsl_law.h>
|
||||
#include <asm/fsl_serdes.h>
|
||||
#include <asm/fsl_portals.h>
|
||||
#include <asm/fsl_liodn.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
struct cpu_type *cpu = gd->arch.cpu;
|
||||
|
||||
printf("Board: %sEMU\n", cpu->name);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_early_init_r(void)
|
||||
{
|
||||
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
||||
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
|
||||
|
||||
/*
|
||||
* Remap Boot flash + PROMJET region to caching-inhibited
|
||||
* so that flash can be erased properly.
|
||||
*/
|
||||
|
||||
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
||||
flush_dcache();
|
||||
invalidate_icache();
|
||||
|
||||
/* invalidate existing TLB entry for flash */
|
||||
disable_tlb(flash_esel);
|
||||
|
||||
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
|
||||
MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, flash_esel, BOOKE_PAGESZ_256M, 1);
|
||||
|
||||
set_liodns();
|
||||
#ifdef CONFIG_SYS_DPAA_QBMAN
|
||||
setup_portals();
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int misc_init_r(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
void ft_board_setup(void *blob, bd_t *bd)
|
||||
{
|
||||
phys_addr_t base;
|
||||
phys_size_t size;
|
||||
|
||||
ft_cpu_setup(blob, bd);
|
||||
|
||||
base = getenv_bootm_low();
|
||||
size = getenv_bootm_size();
|
||||
|
||||
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
||||
|
||||
fdt_fixup_liodn(blob);
|
||||
fdt_fixup_dr_usb(blob, bd);
|
||||
}
|
||||
@@ -1,7 +1,23 @@
|
||||
/*
|
||||
* Copyright 2009-2012 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
@@ -47,7 +63,7 @@ int checkboard(void)
|
||||
|
||||
printf("Board: %sQDS, ", cpu->name);
|
||||
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
|
||||
QIXIS_READ(id), QIXIS_READ(arch));
|
||||
QIXIS_READ(id), QIXIS_READ(arch));
|
||||
|
||||
sw = QIXIS_READ(brdcfg[0]);
|
||||
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
|
||||
@@ -62,8 +78,8 @@ int checkboard(void)
|
||||
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
|
||||
|
||||
printf("FPGA: v%d (%s), build %d",
|
||||
(int)QIXIS_READ(scver), qixis_read_tag(buf),
|
||||
(int)qixis_read_minor());
|
||||
(int)QIXIS_READ(scver), qixis_read_tag(buf),
|
||||
(int)qixis_read_minor());
|
||||
/* the timestamp string contains "\n" at the end */
|
||||
printf(" on %s", qixis_read_time(buf));
|
||||
|
||||
@@ -78,7 +94,7 @@ int checkboard(void)
|
||||
puts("SERDES Reference Clocks: ");
|
||||
sw = QIXIS_READ(brdcfg[2]);
|
||||
for (i = 0; i < MAX_SERDES; i++) {
|
||||
static const char *freq[] = {
|
||||
static const char * const freq[] = {
|
||||
"100", "125", "156.25", "161.1328125"};
|
||||
unsigned int clock = (sw >> (6 - 2 * i)) & 3;
|
||||
|
||||
@@ -416,7 +432,7 @@ int config_backside_crossbar_mux(void)
|
||||
break;
|
||||
default:
|
||||
printf("WARNING: unsupported for SerDes3 Protocol %d\n",
|
||||
srds_prtcl_s3);
|
||||
srds_prtcl_s3);
|
||||
return -1;
|
||||
}
|
||||
|
||||
@@ -456,7 +472,7 @@ int config_backside_crossbar_mux(void)
|
||||
break;
|
||||
default:
|
||||
printf("WARNING: unsupported for SerDes4 Protocol %d\n",
|
||||
srds_prtcl_s4);
|
||||
srds_prtcl_s4);
|
||||
return -1;
|
||||
}
|
||||
|
||||
@@ -481,8 +497,8 @@ int board_early_init_r(void)
|
||||
disable_tlb(flash_esel);
|
||||
|
||||
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, flash_esel, BOOKE_PAGESZ_256M, 1);
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, flash_esel, BOOKE_PAGESZ_256M, 1);
|
||||
|
||||
set_liodns();
|
||||
#ifdef CONFIG_SYS_DPAA_QBMAN
|
||||
@@ -620,9 +636,8 @@ int misc_init_r(void)
|
||||
u32 pllcr0 = srds_regs->bank[i].pllcr0;
|
||||
u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
|
||||
if (expected != actual[i]) {
|
||||
printf("Warning: SERDES%u expects reference clock"
|
||||
" %sMHz, but actual is %sMHz\n", i + 1,
|
||||
serdes_clock_to_string(expected),
|
||||
printf("Warning: SERDES%u expects reference clock %sMHz, but actual is %sMHz\n",
|
||||
i + 1, serdes_clock_to_string(expected),
|
||||
serdes_clock_to_string(actual[i]));
|
||||
}
|
||||
}
|
||||
@@ -781,42 +796,44 @@ void qixis_dump_switch(void)
|
||||
}
|
||||
|
||||
sw[0] = dutcfg[0];
|
||||
sw[1] = (dutcfg[1] << 0x07) | \
|
||||
((dutcfg[12] & 0xC0) >> 1) | \
|
||||
((dutcfg[11] & 0xE0) >> 3) | \
|
||||
((dutcfg[6] & 0x80) >> 6) | \
|
||||
sw[1] = (dutcfg[1] << 0x07) |
|
||||
((dutcfg[12] & 0xC0) >> 1) |
|
||||
((dutcfg[11] & 0xE0) >> 3) |
|
||||
((dutcfg[6] & 0x80) >> 6) |
|
||||
((dutcfg[1] & 0x80) >> 7);
|
||||
sw[2] = ((brdcfg[1] & 0x0f) << 4) | \
|
||||
((brdcfg[1] & 0x30) >> 2) | \
|
||||
((brdcfg[1] & 0x40) >> 5) | \
|
||||
sw[2] = ((brdcfg[1] & 0x0f) << 4) |
|
||||
((brdcfg[1] & 0x30) >> 2) |
|
||||
((brdcfg[1] & 0x40) >> 5) |
|
||||
((brdcfg[1] & 0x80) >> 7);
|
||||
sw[3] = brdcfg[2];
|
||||
sw[4] = ((dutcfg[2] & 0x01) << 7) | \
|
||||
((dutcfg[2] & 0x06) << 4) | \
|
||||
((~QIXIS_READ(present)) & 0x10) | \
|
||||
((brdcfg[3] & 0x80) >> 4) | \
|
||||
((brdcfg[3] & 0x01) << 2) | \
|
||||
((brdcfg[6] == 0x62) ? 3 : \
|
||||
((brdcfg[6] == 0x5a) ? 2 : \
|
||||
sw[4] = ((dutcfg[2] & 0x01) << 7) |
|
||||
((dutcfg[2] & 0x06) << 4) |
|
||||
((~QIXIS_READ(present)) & 0x10) |
|
||||
((brdcfg[3] & 0x80) >> 4) |
|
||||
((brdcfg[3] & 0x01) << 2) |
|
||||
((brdcfg[6] == 0x62) ? 3 :
|
||||
((brdcfg[6] == 0x5a) ? 2 :
|
||||
((brdcfg[6] == 0x5e) ? 1 : 0)));
|
||||
sw[5] = ((brdcfg[0] & 0x0f) << 4) | \
|
||||
((QIXIS_READ(rst_ctl) & 0x30) >> 2) | \
|
||||
sw[5] = ((brdcfg[0] & 0x0f) << 4) |
|
||||
((QIXIS_READ(rst_ctl) & 0x30) >> 2) |
|
||||
((brdcfg[0] & 0x40) >> 5);
|
||||
sw[6] = (brdcfg[11] & 0x20) |
|
||||
((brdcfg[5] & 0x02) << 3);
|
||||
sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | \
|
||||
sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) |
|
||||
((brdcfg[5] & 0x10) << 2);
|
||||
sw[8] = ((brdcfg[12] & 0x08) << 4) | \
|
||||
sw[8] = ((brdcfg[12] & 0x08) << 4) |
|
||||
((brdcfg[12] & 0x03) << 5);
|
||||
|
||||
puts("DIP switch (reverse-engineering)\n");
|
||||
for (i = 0; i < 9; i++) {
|
||||
printf("SW%d = 0b%s (0x%02x)\n",
|
||||
i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
|
||||
i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
|
||||
}
|
||||
}
|
||||
|
||||
static int do_vdd_adjust(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||
static int do_vdd_adjust(cmd_tbl_t *cmdtp,
|
||||
int flag, int argc,
|
||||
char * const argv[])
|
||||
{
|
||||
ulong override;
|
||||
|
||||
@@ -120,9 +120,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 16, BOOKE_PAGESZ_64K, 1),
|
||||
#endif
|
||||
#ifdef QIXIS_BASE_PHYS
|
||||
SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
|
||||
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
||||
0, 17, BOOKE_PAGESZ_4K, 1),
|
||||
#endif
|
||||
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
|
||||
/*
|
||||
* SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for
|
||||
|
||||
@@ -925,6 +925,7 @@ stxgp3 powerpc mpc85xx stxgp3 stx
|
||||
stxssa powerpc mpc85xx stxssa stx - stxssa
|
||||
stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M
|
||||
T4240QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240
|
||||
T4240EMU powerpc mpc85xx t4qds freescale - T4240EMU:PPC_T4240
|
||||
T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
|
||||
T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
|
||||
T4240QDS_SRIO_PCIE_BOOT powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
|
||||
|
||||
185
include/configs/T4240EMU.h
Normal file
185
include/configs/T4240EMU.h
Normal file
@@ -0,0 +1,185 @@
|
||||
/*
|
||||
* Copyright 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
* T4240 EMU board configuration file
|
||||
*/
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#define CONFIG_T4240EMU
|
||||
#define CONFIG_PHYS_64BIT
|
||||
|
||||
#define CONFIG_SYS_NO_FLASH 1
|
||||
#define CONFIG_SYS_FSL_DDR_EMU 1
|
||||
#define CONFIG_SYS_FSL_NO_QIXIS 1
|
||||
#define CONFIG_SYS_FSL_NO_SERDES 1
|
||||
|
||||
#include "t4qds.h"
|
||||
|
||||
#define CONFIG_CMD_CACHE
|
||||
#define CONFIG_CMD_CACHE_FLUSH
|
||||
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
|
||||
#define CONFIG_SYS_CLK_FREQ 100000000
|
||||
#define CONFIG_DDR_CLK_FREQ 133333333
|
||||
#define CONFIG_FSL_TBCLK_EXTRA_DIV 100
|
||||
|
||||
|
||||
/*
|
||||
* DDR Setup
|
||||
*/
|
||||
#define CONFIG_SYS_SPD_BUS_NUM 1
|
||||
#define SPD_EEPROM_ADDRESS1 0x51
|
||||
#define SPD_EEPROM_ADDRESS2 0x52
|
||||
#define SPD_EEPROM_ADDRESS3 0x53
|
||||
#define SPD_EEPROM_ADDRESS4 0x54
|
||||
#define SPD_EEPROM_ADDRESS5 0x55
|
||||
#define SPD_EEPROM_ADDRESS6 0x56
|
||||
#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */
|
||||
#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
|
||||
|
||||
/*
|
||||
* IFC Definitions
|
||||
*/
|
||||
#define CONFIG_SYS_NOR0_CSPR_EXT (0xf)
|
||||
#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
|
||||
/* NOR Flash Timing Params */
|
||||
#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
|
||||
+ 0x8000000) | \
|
||||
CSPR_PORT_SIZE_32 | \
|
||||
CSPR_MSEL_NOR | \
|
||||
CSPR_V)
|
||||
#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(0)
|
||||
#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \
|
||||
FTIM0_NOR_TEADC(0x1) | \
|
||||
FTIM0_NOR_TEAHC(0x1))
|
||||
#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \
|
||||
FTIM1_NOR_TRAD_NOR(0x1))
|
||||
#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) | \
|
||||
FTIM2_NOR_TCH(0x0) | \
|
||||
FTIM2_NOR_TWP(0x1))
|
||||
#define CONFIG_SYS_NOR_FTIM3 0x04000000
|
||||
#define CONFIG_SYS_IFC_CCR 0x01000000
|
||||
|
||||
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
|
||||
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
|
||||
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
|
||||
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
|
||||
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
|
||||
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
|
||||
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
|
||||
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
|
||||
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_SYS_FSL_I2C_SPEED 4000000 /* faster speed for emulator */
|
||||
#define CONFIG_SYS_FSL_I2C2_SPEED 4000000
|
||||
|
||||
/* Qman/Bman */
|
||||
#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
|
||||
#define CONFIG_SYS_BMAN_NUM_PORTALS 50
|
||||
#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
|
||||
#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
|
||||
#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
|
||||
#define CONFIG_SYS_QMAN_NUM_PORTALS 50
|
||||
#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
|
||||
#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
|
||||
#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
|
||||
|
||||
#define CONFIG_SYS_DPAA_FMAN
|
||||
#define CONFIG_SYS_DPAA_PME
|
||||
#define CONFIG_SYS_PMAN
|
||||
#define CONFIG_SYS_DPAA_DCE
|
||||
#define CONFIG_SYS_INTERLAKEN
|
||||
|
||||
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
|
||||
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000
|
||||
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
|
||||
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
|
||||
|
||||
|
||||
|
||||
#define CONFIG_BOOTDELAY 0
|
||||
|
||||
/*
|
||||
* T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
|
||||
* 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
|
||||
* interleaving. It can be cacheline, page, bank, superbank.
|
||||
* See doc/README.fsl-ddr for details.
|
||||
*/
|
||||
#ifdef CONFIG_PPC_T4240
|
||||
#define CTRL_INTLV_PREFERED 3way_4KB
|
||||
#else
|
||||
#define CTRL_INTLV_PREFERED cacheline
|
||||
#endif
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"hwconfig=fsl_ddr:" \
|
||||
"ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \
|
||||
"bank_intlv=auto;" \
|
||||
"netdev=eth0\0" \
|
||||
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
|
||||
"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=2000000\0" \
|
||||
"ramdiskfile=t4240emu/ramdisk.uboot\0" \
|
||||
"fdtaddr=c00000\0" \
|
||||
"fdtfile=t4240emu/t4240emu.dtb\0" \
|
||||
"bdev=sda3\0" \
|
||||
"c=ffe\0"
|
||||
|
||||
/*
|
||||
* For emulation this causes u-boot to jump to the start of the proof point
|
||||
* app code automatically
|
||||
*/
|
||||
#define CONFIG_PROOF_POINTS \
|
||||
"setenv bootargs root=/dev/$bdev rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"cpu 1 release 0x29000000 - - -;" \
|
||||
"cpu 2 release 0x29000000 - - -;" \
|
||||
"cpu 3 release 0x29000000 - - -;" \
|
||||
"cpu 4 release 0x29000000 - - -;" \
|
||||
"cpu 5 release 0x29000000 - - -;" \
|
||||
"cpu 6 release 0x29000000 - - -;" \
|
||||
"cpu 7 release 0x29000000 - - -;" \
|
||||
"go 0x29000000"
|
||||
|
||||
#define CONFIG_HVBOOT \
|
||||
"setenv bootargs config-addr=0x60000000; " \
|
||||
"bootm 0x01000000 - 0x00f00000"
|
||||
|
||||
#define CONFIG_LINUX \
|
||||
"errata;" \
|
||||
"setenv othbootargs ignore_loglevel;" \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"setenv ramdiskaddr 0x02000000;" \
|
||||
"setenv fdtaddr 0x00c00000;" \
|
||||
"setenv loadaddr 0x1000000;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_LINUX
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
@@ -7,6 +7,9 @@
|
||||
/*
|
||||
* T4240 QDS board configuration file
|
||||
*/
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#define CONFIG_T4240QDS
|
||||
#define CONFIG_PHYS_64BIT
|
||||
|
||||
@@ -15,4 +18,541 @@
|
||||
|
||||
#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
|
||||
|
||||
#ifdef CONFIG_RAMBOOT_PBL
|
||||
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
|
||||
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
|
||||
#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg
|
||||
#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
|
||||
/* Set 1M boot space */
|
||||
#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
|
||||
#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
|
||||
(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
|
||||
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
#endif
|
||||
|
||||
#define CONFIG_SRIO_PCIE_BOOT_MASTER
|
||||
#define CONFIG_DDR_ECC
|
||||
|
||||
#include "t4qds.h"
|
||||
|
||||
#ifdef CONFIG_SYS_NO_FLASH
|
||||
#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
#endif
|
||||
#else
|
||||
#define CONFIG_FLASH_CFI_DRIVER
|
||||
#define CONFIG_SYS_FLASH_CFI
|
||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPIFLASH)
|
||||
#define CONFIG_SYS_EXTRA_ENV_RELOC
|
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||||
#define CONFIG_ENV_SPI_BUS 0
|
||||
#define CONFIG_ENV_SPI_CS 0
|
||||
#define CONFIG_ENV_SPI_MAX_HZ 10000000
|
||||
#define CONFIG_ENV_SPI_MODE 0
|
||||
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
|
||||
#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
|
||||
#define CONFIG_ENV_SECT_SIZE 0x10000
|
||||
#elif defined(CONFIG_SDCARD)
|
||||
#define CONFIG_SYS_EXTRA_ENV_RELOC
|
||||
#define CONFIG_ENV_IS_IN_MMC
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 0
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#define CONFIG_ENV_OFFSET (512 * 1097)
|
||||
#elif defined(CONFIG_NAND)
|
||||
#define CONFIG_SYS_EXTRA_ENV_RELOC
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
|
||||
#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
|
||||
#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
|
||||
#define CONFIG_ENV_IS_IN_REMOTE
|
||||
#define CONFIG_ENV_ADDR 0xffe20000
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#elif defined(CONFIG_ENV_IS_NOWHERE)
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#else
|
||||
#define CONFIG_ENV_IS_IN_FLASH
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
|
||||
#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
unsigned long get_board_sys_clk(void);
|
||||
unsigned long get_board_ddr_clk(void);
|
||||
#endif
|
||||
|
||||
/* EEPROM */
|
||||
#define CONFIG_ID_EEPROM
|
||||
#define CONFIG_SYS_I2C_EEPROM_NXID
|
||||
#define CONFIG_SYS_EEPROM_BUS_NUM 0
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
||||
|
||||
/*
|
||||
* DDR Setup
|
||||
*/
|
||||
#define CONFIG_SYS_SPD_BUS_NUM 0
|
||||
#define SPD_EEPROM_ADDRESS1 0x51
|
||||
#define SPD_EEPROM_ADDRESS2 0x52
|
||||
#define SPD_EEPROM_ADDRESS3 0x53
|
||||
#define SPD_EEPROM_ADDRESS4 0x54
|
||||
#define SPD_EEPROM_ADDRESS5 0x55
|
||||
#define SPD_EEPROM_ADDRESS6 0x56
|
||||
#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */
|
||||
#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
|
||||
|
||||
/*
|
||||
* IFC Definitions
|
||||
*/
|
||||
#define CONFIG_SYS_NOR0_CSPR_EXT (0xf)
|
||||
#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
|
||||
+ 0x8000000) | \
|
||||
CSPR_PORT_SIZE_16 | \
|
||||
CSPR_MSEL_NOR | \
|
||||
CSPR_V)
|
||||
#define CONFIG_SYS_NOR1_CSPR_EXT (0xf)
|
||||
#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
|
||||
CSPR_PORT_SIZE_16 | \
|
||||
CSPR_MSEL_NOR | \
|
||||
CSPR_V)
|
||||
#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
|
||||
/* NOR Flash Timing Params */
|
||||
#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
|
||||
|
||||
#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
|
||||
FTIM0_NOR_TEADC(0x5) | \
|
||||
FTIM0_NOR_TEAHC(0x5))
|
||||
#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
|
||||
FTIM1_NOR_TRAD_NOR(0x1A) |\
|
||||
FTIM1_NOR_TSEQRAD_NOR(0x13))
|
||||
#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
|
||||
FTIM2_NOR_TCH(0x4) | \
|
||||
FTIM2_NOR_TWPH(0x0E) | \
|
||||
FTIM2_NOR_TWP(0x1c))
|
||||
#define CONFIG_SYS_NOR_FTIM3 0x0
|
||||
|
||||
#define CONFIG_SYS_FLASH_QUIET_TEST
|
||||
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
|
||||
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
||||
|
||||
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
||||
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \
|
||||
+ 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
|
||||
|
||||
#define CONFIG_FSL_QIXIS /* use common QIXIS code */
|
||||
#define QIXIS_BASE 0xffdf0000
|
||||
#define QIXIS_LBMAP_SWITCH 6
|
||||
#define QIXIS_LBMAP_MASK 0x0f
|
||||
#define QIXIS_LBMAP_SHIFT 0
|
||||
#define QIXIS_LBMAP_DFLTBANK 0x00
|
||||
#define QIXIS_LBMAP_ALTBANK 0x04
|
||||
#define QIXIS_RST_CTL_RESET 0x83
|
||||
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
|
||||
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
|
||||
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
|
||||
#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE)
|
||||
|
||||
#define CONFIG_SYS_CSPR3_EXT (0xf)
|
||||
#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
|
||||
| CSPR_PORT_SIZE_8 \
|
||||
| CSPR_MSEL_GPCM \
|
||||
| CSPR_V)
|
||||
#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024)
|
||||
#define CONFIG_SYS_CSOR3 0x0
|
||||
/* QIXIS Timing parameters for IFC CS3 */
|
||||
#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
|
||||
FTIM0_GPCM_TEADC(0x0e) | \
|
||||
FTIM0_GPCM_TEAHC(0x0e))
|
||||
#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
|
||||
FTIM1_GPCM_TRAD(0x3f))
|
||||
#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
|
||||
FTIM2_GPCM_TCH(0x0) | \
|
||||
FTIM2_GPCM_TWP(0x1f))
|
||||
#define CONFIG_SYS_CS3_FTIM3 0x0
|
||||
|
||||
/* NAND Flash on IFC */
|
||||
#define CONFIG_NAND_FSL_IFC
|
||||
#define CONFIG_SYS_NAND_BASE 0xff800000
|
||||
#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
|
||||
|
||||
#define CONFIG_SYS_NAND_CSPR_EXT (0xf)
|
||||
#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
|
||||
| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
|
||||
| CSPR_MSEL_NAND /* MSEL = NAND */ \
|
||||
| CSPR_V)
|
||||
#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
|
||||
|
||||
#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
|
||||
| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
|
||||
| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
|
||||
| CSOR_NAND_RAL_3 /* RAL = 2Byes */ \
|
||||
| CSOR_NAND_PGS_2K /* Page Size = 2K */ \
|
||||
| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
|
||||
| CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
|
||||
|
||||
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
||||
|
||||
/* ONFI NAND Flash mode0 Timing Params */
|
||||
#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
|
||||
FTIM0_NAND_TWP(0x18) | \
|
||||
FTIM0_NAND_TWCHT(0x07) | \
|
||||
FTIM0_NAND_TWH(0x0a))
|
||||
#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
|
||||
FTIM1_NAND_TWBE(0x39) | \
|
||||
FTIM1_NAND_TRR(0x0e) | \
|
||||
FTIM1_NAND_TRP(0x18))
|
||||
#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
|
||||
FTIM2_NAND_TREH(0x0a) | \
|
||||
FTIM2_NAND_TWHRE(0x1e))
|
||||
#define CONFIG_SYS_NAND_FTIM3 0x0
|
||||
|
||||
#define CONFIG_SYS_NAND_DDR_LAW 11
|
||||
|
||||
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_MTD_NAND_VERIFY_WRITE
|
||||
#define CONFIG_CMD_NAND
|
||||
|
||||
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
|
||||
|
||||
#if defined(CONFIG_NAND)
|
||||
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
|
||||
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
|
||||
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
|
||||
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
|
||||
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
|
||||
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
|
||||
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
|
||||
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
|
||||
#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT
|
||||
#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR
|
||||
#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
|
||||
#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
|
||||
#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
|
||||
#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
|
||||
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
|
||||
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
|
||||
#else
|
||||
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
|
||||
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
|
||||
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
|
||||
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
|
||||
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
|
||||
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
|
||||
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
|
||||
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
|
||||
#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT
|
||||
#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR
|
||||
#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK
|
||||
#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR
|
||||
#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0
|
||||
#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1
|
||||
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
|
||||
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
|
||||
#endif
|
||||
#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT
|
||||
#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR
|
||||
#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
|
||||
#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
|
||||
#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
|
||||
#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
|
||||
#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
|
||||
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
|
||||
|
||||
#if defined(CONFIG_RAMBOOT_PBL)
|
||||
#define CONFIG_SYS_RAMBOOT
|
||||
#endif
|
||||
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */
|
||||
#define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */
|
||||
#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */
|
||||
#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */
|
||||
|
||||
#define I2C_MUX_CH_DEFAULT 0x8
|
||||
#define I2C_MUX_CH_VOL_MONITOR 0xa
|
||||
#define I2C_MUX_CH_VSC3316_FS 0xc
|
||||
#define I2C_MUX_CH_VSC3316_BS 0xd
|
||||
|
||||
/* Voltage monitor on channel 2*/
|
||||
#define I2C_VOL_MONITOR_ADDR 0x40
|
||||
#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
|
||||
#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
|
||||
#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
|
||||
|
||||
/* VSC Crossbar switches */
|
||||
#define CONFIG_VSC_CROSSBAR
|
||||
#define VSC3316_FSM_TX_ADDR 0x70
|
||||
#define VSC3316_FSM_RX_ADDR 0x71
|
||||
|
||||
/*
|
||||
* RapidIO
|
||||
*/
|
||||
|
||||
/*
|
||||
* for slave u-boot IMAGE instored in master memory space,
|
||||
* PHYS must be aligned based on the SIZE
|
||||
*/
|
||||
#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
|
||||
#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
|
||||
#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */
|
||||
#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
|
||||
/*
|
||||
* for slave UCODE and ENV instored in master memory space,
|
||||
* PHYS must be aligned based on the SIZE
|
||||
*/
|
||||
#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
|
||||
#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
|
||||
#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */
|
||||
|
||||
/* slave core release by master*/
|
||||
#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
|
||||
#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
|
||||
|
||||
/*
|
||||
* SRIO_PCIE_BOOT - SLAVE
|
||||
*/
|
||||
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
|
||||
#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
|
||||
#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
|
||||
(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
|
||||
#endif
|
||||
/*
|
||||
* eSPI - Enhanced SPI
|
||||
*/
|
||||
#define CONFIG_FSL_ESPI
|
||||
#define CONFIG_SPI_FLASH
|
||||
#define CONFIG_SPI_FLASH_SST
|
||||
#define CONFIG_CMD_SF
|
||||
#define CONFIG_SF_DEFAULT_SPEED 10000000
|
||||
#define CONFIG_SF_DEFAULT_MODE 0
|
||||
|
||||
|
||||
/* Qman/Bman */
|
||||
#ifndef CONFIG_NOBQFMAN
|
||||
#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
|
||||
#define CONFIG_SYS_BMAN_NUM_PORTALS 50
|
||||
#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
|
||||
#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
|
||||
#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
|
||||
#define CONFIG_SYS_QMAN_NUM_PORTALS 50
|
||||
#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
|
||||
#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
|
||||
#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
|
||||
|
||||
#define CONFIG_SYS_DPAA_FMAN
|
||||
#define CONFIG_SYS_DPAA_PME
|
||||
#define CONFIG_SYS_PMAN
|
||||
#define CONFIG_SYS_DPAA_DCE
|
||||
#define CONFIG_SYS_INTERLAKEN
|
||||
|
||||
/* Default address of microcode for the Linux Fman driver */
|
||||
#if defined(CONFIG_SPIFLASH)
|
||||
/*
|
||||
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
|
||||
* env, so we got 0x110000.
|
||||
*/
|
||||
#define CONFIG_SYS_QE_FW_IN_SPIFLASH
|
||||
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000
|
||||
#elif defined(CONFIG_SDCARD)
|
||||
/*
|
||||
* PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
|
||||
* about 545KB (1089 blocks), Env is stored after the image, and the env size is
|
||||
* 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
|
||||
*/
|
||||
#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
|
||||
#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130)
|
||||
#elif defined(CONFIG_NAND)
|
||||
#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
|
||||
#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
|
||||
#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
|
||||
/*
|
||||
* Slave has no ucode locally, it can fetch this from remote. When implementing
|
||||
* in two corenet boards, slave's ucode could be stored in master's memory
|
||||
* space, the address can be mapped from slave TLB->slave LAW->
|
||||
* slave SRIO or PCIE outbound window->master inbound window->
|
||||
* master LAW->the ucode address in master's memory space.
|
||||
*/
|
||||
#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
|
||||
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000
|
||||
#else
|
||||
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
|
||||
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000
|
||||
#endif
|
||||
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
|
||||
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
|
||||
#endif /* CONFIG_NOBQFMAN */
|
||||
|
||||
#ifdef CONFIG_SYS_DPAA_FMAN
|
||||
#define CONFIG_FMAN_ENET
|
||||
#define CONFIG_PHYLIB_10G
|
||||
#define CONFIG_PHY_VITESSE
|
||||
#define CONFIG_PHY_TERANETICS
|
||||
#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
|
||||
#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
|
||||
#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
|
||||
#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
|
||||
#define FM1_10GEC1_PHY_ADDR 0x0
|
||||
#define FM1_10GEC2_PHY_ADDR 0x1
|
||||
#define FM2_10GEC1_PHY_ADDR 0x2
|
||||
#define FM2_10GEC2_PHY_ADDR 0x3
|
||||
#endif
|
||||
|
||||
|
||||
/* SATA */
|
||||
#ifdef CONFIG_FSL_SATA_V2
|
||||
#define CONFIG_LIBATA
|
||||
#define CONFIG_FSL_SATA
|
||||
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
||||
#define CONFIG_SATA1
|
||||
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
|
||||
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
||||
#define CONFIG_SATA2
|
||||
#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
|
||||
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
|
||||
|
||||
#define CONFIG_LBA48
|
||||
#define CONFIG_CMD_SATA
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_CMD_EXT2
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_FMAN_ENET
|
||||
#define CONFIG_MII /* MII PHY management */
|
||||
#define CONFIG_ETHPRIME "FM1@DTSEC1"
|
||||
#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* USB
|
||||
*/
|
||||
#define CONFIG_CMD_USB
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_USB_EHCI_FSL
|
||||
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
||||
#define CONFIG_CMD_EXT2
|
||||
#define CONFIG_HAS_FSL_DR_USB
|
||||
|
||||
#define CONFIG_MMC
|
||||
|
||||
#ifdef CONFIG_MMC
|
||||
#define CONFIG_FSL_ESDHC
|
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
|
||||
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
|
||||
#define CONFIG_CMD_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_CMD_EXT2
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#endif
|
||||
|
||||
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
|
||||
|
||||
#define __USB_PHY_TYPE utmi
|
||||
|
||||
/*
|
||||
* T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
|
||||
* 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
|
||||
* interleaving. It can be cacheline, page, bank, superbank.
|
||||
* See doc/README.fsl-ddr for details.
|
||||
*/
|
||||
#ifdef CONFIG_PPC_T4240
|
||||
#define CTRL_INTLV_PREFERED 3way_4KB
|
||||
#else
|
||||
#define CTRL_INTLV_PREFERED cacheline
|
||||
#endif
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"hwconfig=fsl_ddr:" \
|
||||
"ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \
|
||||
"bank_intlv=auto;" \
|
||||
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
|
||||
"netdev=eth0\0" \
|
||||
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
|
||||
"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
|
||||
"tftpflash=tftpboot $loadaddr $uboot && " \
|
||||
"protect off $ubootaddr +$filesize && " \
|
||||
"erase $ubootaddr +$filesize && " \
|
||||
"cp.b $loadaddr $ubootaddr $filesize && " \
|
||||
"protect on $ubootaddr +$filesize && " \
|
||||
"cmp.b $loadaddr $ubootaddr $filesize\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=2000000\0" \
|
||||
"ramdiskfile=t4240qds/ramdisk.uboot\0" \
|
||||
"fdtaddr=c00000\0" \
|
||||
"fdtfile=t4240qds/t4240qds.dtb\0" \
|
||||
"bdev=sda3\0" \
|
||||
"c=ffe\0"
|
||||
|
||||
#define CONFIG_HVBOOT \
|
||||
"setenv bootargs config-addr=0x60000000; " \
|
||||
"bootm 0x01000000 - 0x00f00000"
|
||||
|
||||
#define CONFIG_ALU \
|
||||
"setenv bootargs root=/dev/$bdev rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"cpu 1 release 0x01000000 - - -;" \
|
||||
"cpu 2 release 0x01000000 - - -;" \
|
||||
"cpu 3 release 0x01000000 - - -;" \
|
||||
"cpu 4 release 0x01000000 - - -;" \
|
||||
"cpu 5 release 0x01000000 - - -;" \
|
||||
"cpu 6 release 0x01000000 - - -;" \
|
||||
"cpu 7 release 0x01000000 - - -;" \
|
||||
"go 0x01000000"
|
||||
|
||||
#define CONFIG_LINUX \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"setenv ramdiskaddr 0x02000000;" \
|
||||
"setenv fdtaddr 0x00c00000;" \
|
||||
"setenv loadaddr 0x1000000;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
|
||||
#define CONFIG_HDBOOT \
|
||||
"setenv bootargs root=/dev/$bdev rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr - $fdtaddr"
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr - $fdtaddr"
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_LINUX
|
||||
|
||||
#ifdef CONFIG_SECURE_BOOT
|
||||
#include <asm/fsl_secure_boot.h>
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
@@ -7,24 +7,8 @@
|
||||
/*
|
||||
* Corenet DS style board configuration file
|
||||
*/
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#ifdef CONFIG_RAMBOOT_PBL
|
||||
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
|
||||
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
|
||||
#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg
|
||||
#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
|
||||
/* Set 1M boot space */
|
||||
#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
|
||||
#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
|
||||
(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
|
||||
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
#endif
|
||||
#ifndef __T4QDS_H
|
||||
#define __T4QDS_H
|
||||
|
||||
#define CONFIG_CMD_REGINFO
|
||||
|
||||
@@ -57,70 +41,16 @@
|
||||
#define CONFIG_SYS_SRIO
|
||||
#define CONFIG_SRIO1 /* SRIO port 1 */
|
||||
#define CONFIG_SRIO2 /* SRIO port 2 */
|
||||
#define CONFIG_SRIO_PCIE_BOOT_MASTER
|
||||
|
||||
#define CONFIG_FSL_LAW /* Use common FSL init code */
|
||||
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
#ifdef CONFIG_SYS_NO_FLASH
|
||||
#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
#endif
|
||||
#else
|
||||
#define CONFIG_FLASH_CFI_DRIVER
|
||||
#define CONFIG_SYS_FLASH_CFI
|
||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPIFLASH)
|
||||
#define CONFIG_SYS_EXTRA_ENV_RELOC
|
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||||
#define CONFIG_ENV_SPI_BUS 0
|
||||
#define CONFIG_ENV_SPI_CS 0
|
||||
#define CONFIG_ENV_SPI_MAX_HZ 10000000
|
||||
#define CONFIG_ENV_SPI_MODE 0
|
||||
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
|
||||
#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
|
||||
#define CONFIG_ENV_SECT_SIZE 0x10000
|
||||
#elif defined(CONFIG_SDCARD)
|
||||
#define CONFIG_SYS_EXTRA_ENV_RELOC
|
||||
#define CONFIG_ENV_IS_IN_MMC
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 0
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#define CONFIG_ENV_OFFSET (512 * 1097)
|
||||
#elif defined(CONFIG_NAND)
|
||||
#define CONFIG_SYS_EXTRA_ENV_RELOC
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
|
||||
#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
|
||||
#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
|
||||
#define CONFIG_ENV_IS_IN_REMOTE
|
||||
#define CONFIG_ENV_ADDR 0xffe20000
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#elif defined(CONFIG_ENV_IS_NOWHERE)
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#else
|
||||
#define CONFIG_ENV_IS_IN_FLASH
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
|
||||
#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
unsigned long get_board_sys_clk(void);
|
||||
unsigned long get_board_ddr_clk(void);
|
||||
#endif
|
||||
|
||||
/*
|
||||
* These can be toggled for performance analysis, otherwise use default.
|
||||
*/
|
||||
#define CONFIG_SYS_CACHE_STASHING
|
||||
#define CONFIG_BTB /* toggle branch predition */
|
||||
#define CONFIG_DDR_ECC
|
||||
#ifdef CONFIG_DDR_ECC
|
||||
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
|
||||
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
|
||||
@@ -144,13 +74,6 @@ unsigned long get_board_ddr_clk(void);
|
||||
#define CONFIG_SYS_DCSRBAR 0xf0000000
|
||||
#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
|
||||
|
||||
/* EEPROM */
|
||||
#define CONFIG_ID_EEPROM
|
||||
#define CONFIG_SYS_I2C_EEPROM_NXID
|
||||
#define CONFIG_SYS_EEPROM_BUS_NUM 0
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
||||
|
||||
/*
|
||||
* DDR Setup
|
||||
*/
|
||||
@@ -166,15 +89,6 @@ unsigned long get_board_ddr_clk(void);
|
||||
#define CONFIG_DDR_SPD
|
||||
#define CONFIG_FSL_DDR3
|
||||
|
||||
#define CONFIG_SYS_SPD_BUS_NUM 0
|
||||
#define SPD_EEPROM_ADDRESS1 0x51
|
||||
#define SPD_EEPROM_ADDRESS2 0x52
|
||||
#define SPD_EEPROM_ADDRESS3 0x53
|
||||
#define SPD_EEPROM_ADDRESS4 0x54
|
||||
#define SPD_EEPROM_ADDRESS5 0x55
|
||||
#define SPD_EEPROM_ADDRESS6 0x56
|
||||
#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */
|
||||
#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
|
||||
|
||||
/*
|
||||
* IFC Definitions
|
||||
@@ -182,171 +96,9 @@ unsigned long get_board_ddr_clk(void);
|
||||
#define CONFIG_SYS_FLASH_BASE 0xe0000000
|
||||
#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
|
||||
|
||||
#define CONFIG_SYS_NOR0_CSPR_EXT (0xf)
|
||||
#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
|
||||
+ 0x8000000) | \
|
||||
CSPR_PORT_SIZE_16 | \
|
||||
CSPR_MSEL_NOR | \
|
||||
CSPR_V)
|
||||
#define CONFIG_SYS_NOR1_CSPR_EXT (0xf)
|
||||
#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
|
||||
CSPR_PORT_SIZE_16 | \
|
||||
CSPR_MSEL_NOR | \
|
||||
CSPR_V)
|
||||
#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
|
||||
/* NOR Flash Timing Params */
|
||||
#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
|
||||
|
||||
#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
|
||||
FTIM0_NOR_TEADC(0x5) | \
|
||||
FTIM0_NOR_TEAHC(0x5))
|
||||
#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
|
||||
FTIM1_NOR_TRAD_NOR(0x1A) |\
|
||||
FTIM1_NOR_TSEQRAD_NOR(0x13))
|
||||
#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
|
||||
FTIM2_NOR_TCH(0x4) | \
|
||||
FTIM2_NOR_TWPH(0x0E) | \
|
||||
FTIM2_NOR_TWP(0x1c))
|
||||
#define CONFIG_SYS_NOR_FTIM3 0x0
|
||||
|
||||
#define CONFIG_SYS_FLASH_QUIET_TEST
|
||||
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
|
||||
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
||||
|
||||
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
||||
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \
|
||||
+ 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
|
||||
|
||||
#define CONFIG_FSL_QIXIS /* use common QIXIS code */
|
||||
#define QIXIS_BASE 0xffdf0000
|
||||
#define QIXIS_LBMAP_SWITCH 6
|
||||
#define QIXIS_LBMAP_MASK 0x0f
|
||||
#define QIXIS_LBMAP_SHIFT 0
|
||||
#define QIXIS_LBMAP_DFLTBANK 0x00
|
||||
#define QIXIS_LBMAP_ALTBANK 0x04
|
||||
#define QIXIS_RST_CTL_RESET 0x83
|
||||
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
|
||||
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
|
||||
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
|
||||
#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE)
|
||||
|
||||
#define CONFIG_SYS_CSPR3_EXT (0xf)
|
||||
#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
|
||||
| CSPR_PORT_SIZE_8 \
|
||||
| CSPR_MSEL_GPCM \
|
||||
| CSPR_V)
|
||||
#define CONFIG_SYS_AMASK3 IFC_AMASK(4 * 1024)
|
||||
#define CONFIG_SYS_CSOR3 0x0
|
||||
/* QIXIS Timing parameters for IFC CS3 */
|
||||
#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
|
||||
FTIM0_GPCM_TEADC(0x0e) | \
|
||||
FTIM0_GPCM_TEAHC(0x0e))
|
||||
#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
|
||||
FTIM1_GPCM_TRAD(0x3f))
|
||||
#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
|
||||
FTIM2_GPCM_TCH(0x0) | \
|
||||
FTIM2_GPCM_TWP(0x1f))
|
||||
#define CONFIG_SYS_CS3_FTIM3 0x0
|
||||
|
||||
/* NAND Flash on IFC */
|
||||
#define CONFIG_NAND_FSL_IFC
|
||||
#define CONFIG_SYS_NAND_BASE 0xff800000
|
||||
#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
|
||||
|
||||
#define CONFIG_SYS_NAND_CSPR_EXT (0xf)
|
||||
#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
|
||||
| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
|
||||
| CSPR_MSEL_NAND /* MSEL = NAND */ \
|
||||
| CSPR_V)
|
||||
#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
|
||||
|
||||
#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
|
||||
| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
|
||||
| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
|
||||
| CSOR_NAND_RAL_3 /* RAL = 2Byes */ \
|
||||
| CSOR_NAND_PGS_2K /* Page Size = 2K */ \
|
||||
| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
|
||||
| CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
|
||||
|
||||
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
||||
|
||||
/* ONFI NAND Flash mode0 Timing Params */
|
||||
#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
|
||||
FTIM0_NAND_TWP(0x18) | \
|
||||
FTIM0_NAND_TWCHT(0x07) | \
|
||||
FTIM0_NAND_TWH(0x0a))
|
||||
#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
|
||||
FTIM1_NAND_TWBE(0x39) | \
|
||||
FTIM1_NAND_TRR(0x0e) | \
|
||||
FTIM1_NAND_TRP(0x18))
|
||||
#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
|
||||
FTIM2_NAND_TREH(0x0a) | \
|
||||
FTIM2_NAND_TWHRE(0x1e))
|
||||
#define CONFIG_SYS_NAND_FTIM3 0x0
|
||||
|
||||
#define CONFIG_SYS_NAND_DDR_LAW 11
|
||||
|
||||
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_MTD_NAND_VERIFY_WRITE
|
||||
#define CONFIG_CMD_NAND
|
||||
|
||||
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
|
||||
|
||||
#if defined(CONFIG_NAND)
|
||||
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
|
||||
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
|
||||
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
|
||||
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
|
||||
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
|
||||
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
|
||||
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
|
||||
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
|
||||
#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT
|
||||
#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR
|
||||
#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
|
||||
#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
|
||||
#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
|
||||
#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
|
||||
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
|
||||
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
|
||||
#else
|
||||
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
|
||||
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
|
||||
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
|
||||
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
|
||||
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
|
||||
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
|
||||
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
|
||||
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
|
||||
#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT
|
||||
#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR
|
||||
#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK
|
||||
#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR
|
||||
#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0
|
||||
#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1
|
||||
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
|
||||
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
|
||||
#endif
|
||||
#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT
|
||||
#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR
|
||||
#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
|
||||
#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
|
||||
#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
|
||||
#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
|
||||
#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
|
||||
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
|
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
||||
|
||||
#if defined(CONFIG_RAMBOOT_PBL)
|
||||
#define CONFIG_SYS_RAMBOOT
|
||||
#endif
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
@@ -405,32 +157,11 @@ unsigned long get_board_ddr_clk(void);
|
||||
/* I2C */
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_FSL
|
||||
#define CONFIG_SYS_FSL_I2C_SPEED 100000
|
||||
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
|
||||
#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
|
||||
#define CONFIG_SYS_FSL_I2C2_SPEED 100000
|
||||
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
|
||||
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
|
||||
|
||||
#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */
|
||||
#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */
|
||||
|
||||
#define I2C_MUX_CH_DEFAULT 0x8
|
||||
#define I2C_MUX_CH_VOL_MONITOR 0xa
|
||||
#define I2C_MUX_CH_VSC3316_FS 0xc
|
||||
#define I2C_MUX_CH_VSC3316_BS 0xd
|
||||
|
||||
/* Voltage monitor on channel 2*/
|
||||
#define I2C_VOL_MONITOR_ADDR 0x40
|
||||
#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
|
||||
#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
|
||||
#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
|
||||
|
||||
/* VSC Crossbar switches */
|
||||
#define CONFIG_VSC_CROSSBAR
|
||||
#define VSC3316_FSM_TX_ADDR 0x70
|
||||
#define VSC3316_FSM_RX_ADDR 0x71
|
||||
|
||||
/*
|
||||
* RapidIO
|
||||
*/
|
||||
@@ -442,44 +173,6 @@ unsigned long get_board_ddr_clk(void);
|
||||
#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull
|
||||
#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */
|
||||
|
||||
/*
|
||||
* for slave u-boot IMAGE instored in master memory space,
|
||||
* PHYS must be aligned based on the SIZE
|
||||
*/
|
||||
#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
|
||||
#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
|
||||
#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */
|
||||
#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
|
||||
/*
|
||||
* for slave UCODE and ENV instored in master memory space,
|
||||
* PHYS must be aligned based on the SIZE
|
||||
*/
|
||||
#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
|
||||
#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
|
||||
#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */
|
||||
|
||||
/* slave core release by master*/
|
||||
#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
|
||||
#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
|
||||
|
||||
/*
|
||||
* SRIO_PCIE_BOOT - SLAVE
|
||||
*/
|
||||
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
|
||||
#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
|
||||
#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
|
||||
(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
|
||||
#endif
|
||||
/*
|
||||
* eSPI - Enhanced SPI
|
||||
*/
|
||||
#define CONFIG_FSL_ESPI
|
||||
#define CONFIG_SPI_FLASH
|
||||
#define CONFIG_SPI_FLASH_SST
|
||||
#define CONFIG_CMD_SF
|
||||
#define CONFIG_SF_DEFAULT_SPEED 10000000
|
||||
#define CONFIG_SF_DEFAULT_MODE 0
|
||||
|
||||
/*
|
||||
* General PCI
|
||||
* Memory space is mapped 1-1, but I/O space must start from 0.
|
||||
@@ -523,76 +216,6 @@ unsigned long get_board_ddr_clk(void);
|
||||
#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
|
||||
#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */
|
||||
|
||||
/* Qman/Bman */
|
||||
#ifndef CONFIG_NOBQFMAN
|
||||
#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
|
||||
#define CONFIG_SYS_BMAN_NUM_PORTALS 50
|
||||
#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
|
||||
#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
|
||||
#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
|
||||
#define CONFIG_SYS_QMAN_NUM_PORTALS 50
|
||||
#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
|
||||
#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
|
||||
#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
|
||||
|
||||
#define CONFIG_SYS_DPAA_FMAN
|
||||
#define CONFIG_SYS_DPAA_PME
|
||||
#define CONFIG_SYS_PMAN
|
||||
#define CONFIG_SYS_DPAA_DCE
|
||||
#define CONFIG_SYS_INTERLAKEN
|
||||
|
||||
/* Default address of microcode for the Linux Fman driver */
|
||||
#if defined(CONFIG_SPIFLASH)
|
||||
/*
|
||||
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
|
||||
* env, so we got 0x110000.
|
||||
*/
|
||||
#define CONFIG_SYS_QE_FW_IN_SPIFLASH
|
||||
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000
|
||||
#elif defined(CONFIG_SDCARD)
|
||||
/*
|
||||
* PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
|
||||
* about 545KB (1089 blocks), Env is stored after the image, and the env size is
|
||||
* 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
|
||||
*/
|
||||
#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
|
||||
#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130)
|
||||
#elif defined(CONFIG_NAND)
|
||||
#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
|
||||
#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
|
||||
#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
|
||||
/*
|
||||
* Slave has no ucode locally, it can fetch this from remote. When implementing
|
||||
* in two corenet boards, slave's ucode could be stored in master's memory
|
||||
* space, the address can be mapped from slave TLB->slave LAW->
|
||||
* slave SRIO or PCIE outbound window->master inbound window->
|
||||
* master LAW->the ucode address in master's memory space.
|
||||
*/
|
||||
#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
|
||||
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000
|
||||
#else
|
||||
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
|
||||
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000
|
||||
#endif
|
||||
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
|
||||
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
|
||||
#endif /* CONFIG_NOBQFMAN */
|
||||
|
||||
#ifdef CONFIG_SYS_DPAA_FMAN
|
||||
#define CONFIG_FMAN_ENET
|
||||
#define CONFIG_PHYLIB_10G
|
||||
#define CONFIG_PHY_VITESSE
|
||||
#define CONFIG_PHY_TERANETICS
|
||||
#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
|
||||
#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
|
||||
#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
|
||||
#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
|
||||
#define FM1_10GEC1_PHY_ADDR 0x0
|
||||
#define FM1_10GEC2_PHY_ADDR 0x1
|
||||
#define FM2_10GEC1_PHY_ADDR 0x2
|
||||
#define FM2_10GEC2_PHY_ADDR 0x3
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
#define CONFIG_PCI_INDIRECT_BRIDGE
|
||||
#define CONFIG_NET_MULTI
|
||||
@@ -654,30 +277,6 @@ unsigned long get_board_ddr_clk(void);
|
||||
#define CONFIG_CMD_NET
|
||||
#endif
|
||||
|
||||
/*
|
||||
* USB
|
||||
*/
|
||||
#define CONFIG_CMD_USB
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_USB_EHCI_FSL
|
||||
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
||||
#define CONFIG_CMD_EXT2
|
||||
#define CONFIG_HAS_FSL_DR_USB
|
||||
|
||||
#define CONFIG_MMC
|
||||
|
||||
#ifdef CONFIG_MMC
|
||||
#define CONFIG_FSL_ESDHC
|
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
|
||||
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
|
||||
#define CONFIG_CMD_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_CMD_EXT2
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
@@ -719,112 +318,11 @@ unsigned long get_board_ddr_clk(void);
|
||||
/* default location for tftp and bootm */
|
||||
#define CONFIG_LOADADDR 1000000
|
||||
|
||||
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define __USB_PHY_TYPE utmi
|
||||
|
||||
/*
|
||||
* T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be
|
||||
* 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to
|
||||
* cacheline interleaving. It can be cacheline, page, bank, superbank.
|
||||
* See doc/README.fsl-ddr for details.
|
||||
*/
|
||||
#ifdef CONFIG_PPC_T4240
|
||||
#define CTRL_INTLV_PREFERED 3way_4KB
|
||||
#else
|
||||
#define CTRL_INTLV_PREFERED cacheline
|
||||
#endif
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"hwconfig=fsl_ddr:" \
|
||||
"ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \
|
||||
"bank_intlv=auto;" \
|
||||
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
|
||||
"netdev=eth0\0" \
|
||||
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
|
||||
"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
|
||||
"tftpflash=tftpboot $loadaddr $uboot && " \
|
||||
"protect off $ubootaddr +$filesize && " \
|
||||
"erase $ubootaddr +$filesize && " \
|
||||
"cp.b $loadaddr $ubootaddr $filesize && " \
|
||||
"protect on $ubootaddr +$filesize && " \
|
||||
"cmp.b $loadaddr $ubootaddr $filesize\0" \
|
||||
"consoledev=ttyS0\0" \
|
||||
"ramdiskaddr=2000000\0" \
|
||||
"ramdiskfile=t4240qds/ramdisk.uboot\0" \
|
||||
"fdtaddr=c00000\0" \
|
||||
"fdtfile=t4240qds/t4240qds.dtb\0" \
|
||||
"bdev=sda3\0" \
|
||||
"c=ffe\0"
|
||||
|
||||
/* For emulation this causes u-boot to jump to the start of the proof point
|
||||
app code automatically */
|
||||
#define CONFIG_PROOF_POINTS \
|
||||
"setenv bootargs root=/dev/$bdev rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"cpu 1 release 0x29000000 - - -;" \
|
||||
"cpu 2 release 0x29000000 - - -;" \
|
||||
"cpu 3 release 0x29000000 - - -;" \
|
||||
"cpu 4 release 0x29000000 - - -;" \
|
||||
"cpu 5 release 0x29000000 - - -;" \
|
||||
"cpu 6 release 0x29000000 - - -;" \
|
||||
"cpu 7 release 0x29000000 - - -;" \
|
||||
"go 0x29000000"
|
||||
|
||||
#define CONFIG_HVBOOT \
|
||||
"setenv bootargs config-addr=0x60000000; " \
|
||||
"bootm 0x01000000 - 0x00f00000"
|
||||
|
||||
#define CONFIG_ALU \
|
||||
"setenv bootargs root=/dev/$bdev rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"cpu 1 release 0x01000000 - - -;" \
|
||||
"cpu 2 release 0x01000000 - - -;" \
|
||||
"cpu 3 release 0x01000000 - - -;" \
|
||||
"cpu 4 release 0x01000000 - - -;" \
|
||||
"cpu 5 release 0x01000000 - - -;" \
|
||||
"cpu 6 release 0x01000000 - - -;" \
|
||||
"cpu 7 release 0x01000000 - - -;" \
|
||||
"go 0x01000000"
|
||||
|
||||
#define CONFIG_LINUX \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"setenv ramdiskaddr 0x02000000;" \
|
||||
"setenv fdtaddr 0x00c00000;" \
|
||||
"setenv loadaddr 0x1000000;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
|
||||
#define CONFIG_HDBOOT \
|
||||
"setenv bootargs root=/dev/$bdev rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr - $fdtaddr"
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr - $fdtaddr"
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv bootargs root=/dev/ram rw " \
|
||||
"console=$consoledev,$baudrate $othbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND CONFIG_LINUX
|
||||
|
||||
#ifdef CONFIG_SECURE_BOOT
|
||||
#include <asm/fsl_secure_boot.h>
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
Reference in New Issue
Block a user