Convert CONFIG_CONS_INDEX to Kconfig

This converts the following to Kconfig:
   CONFIG_CONS_INDEX

Signed-off-by: Tom Rini <trini@konsulko.com>

configs/am43xx_evm_defconfig

@@ -10,7 +10,6 @@ CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_MISC_INIT_R is not set

configs/am43xx_evm_qspiboot_defconfig

@@ -10,7 +10,7 @@ CONFIG_DM_GPIO=y
 CONFIG_AM43XX=y
 CONFIG_ENV_OFFSET_REDUND=0x120000
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,QSPI,QSPI_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="QSPI,QSPI_BOOT"
 CONFIG_QSPI_BOOT=y
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y

configs/am43xx_evm_rtconly_defconfig

@@ -10,7 +10,6 @@ CONFIG_SPL_RTC_DDR_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_MISC_INIT_R is not set

configs/am43xx_evm_usbhost_boot_defconfig

@@ -9,7 +9,6 @@ CONFIG_AM43XX=y
 CONFIG_SPL=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_MISC_INIT_R is not set

configs/am43xx_hs_evm_defconfig

@@ -19,7 +19,6 @@ CONFIG_FIT_IMAGE_POST_PROCESS=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_MISC_INIT_R is not set

configs/birdland_bav335a_defconfig

@@ -13,7 +13,6 @@ CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_BAV_VERSION=1
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y

configs/birdland_bav335b_defconfig

@@ -13,7 +13,6 @@ CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_BAV_VERSION=2
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y

configs/gardena-smart-gateway-mt7688_defconfig

@@ -74,6 +74,7 @@ CONFIG_SPI_FLASH_MTD=y
 CONFIG_MTD_UBI_BEB_LIMIT=22
 CONFIG_MT7628_ETH=y
 CONFIG_PHY=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_SPI=y
 CONFIG_MT7621_SPI=y
 CONFIG_WDT=y

configs/linkit-smart-7688_defconfig

@@ -60,6 +60,8 @@ CONFIG_SPI_FLASH_MTD=y
 CONFIG_MT7628_ETH=y
 CONFIG_PHY=y
 CONFIG_MT76X8_USB_PHY=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_CONS_INDEX=3
 CONFIG_SPI=y
 CONFIG_MT7621_SPI=y
 CONFIG_USB=y

configs/ls1028aqds_tfa_lpuart_defconfig

@@ -75,6 +75,7 @@ CONFIG_DM_RTC=y
 CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_SPI=y

configs/mscc_jr2_defconfig

@@ -68,6 +68,7 @@ CONFIG_DM_ETH=y
 CONFIG_MSCC_JR2_SWITCH=y
 CONFIG_PINCTRL=y
 CONFIG_PINCONF=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_DEBUG_UART_ANNOUNCE=y

configs/mscc_luton_defconfig

@@ -72,6 +72,7 @@ CONFIG_DM_ETH=y
 CONFIG_MSCC_LUTON_SWITCH=y
 CONFIG_PINCTRL=y
 CONFIG_PINCONF=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y

configs/mscc_ocelot_defconfig

@@ -72,6 +72,7 @@ CONFIG_DM_ETH=y
 CONFIG_MSCC_OCELOT_SWITCH=y
 CONFIG_PINCTRL=y
 CONFIG_PINCONF=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_DEBUG_UART_ANNOUNCE=y

configs/mscc_serval_defconfig

@@ -66,6 +66,7 @@ CONFIG_DM_ETH=y
 CONFIG_MSCC_SERVAL_SWITCH=y
 CONFIG_PINCTRL=y
 CONFIG_PINCONF=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y

configs/mscc_servalt_defconfig

@@ -63,6 +63,7 @@ CONFIG_DM_ETH=y
 CONFIG_MSCC_SERVALT_SWITCH=y
 CONFIG_PINCTRL=y
 CONFIG_PINCONF=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y

configs/mt7628_rfb_defconfig

@@ -40,7 +40,6 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_XMC=y
 CONFIG_MT7628_ETH=y
-# CONFIG_SPECIFY_CONSOLE_INDEX is not set
 CONFIG_SPI=y
 CONFIG_MT7621_SPI=y
 CONFIG_LZMA=y

configs/x530_defconfig

@@ -70,6 +70,7 @@ CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCI_MVEBU=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_DS1307=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y

include/configs/SBx81LIFKW.h

@@ -38,8 +38,6 @@
  * for your console driver.
  */
 
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is

include/configs/SBx81LIFXCAT.h

@@ -38,8 +38,6 @@
  * for your console driver.
  */
 
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is

include/configs/brsmarc1.h

@@ -69,6 +69,4 @@ BUR_COMMON_ENV \
 /* SPI Flash */
 
 /* Environment */
-
-#define CONFIG_CONS_INDEX			1
 #endif	/* __CONFIG_BRSMARC1_H__ */

include/configs/db-88f6281-bp.h

@@ -29,13 +29,6 @@
 #define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/* Console on UART0 */
 
 /*
  *  Environment variables configurations

include/configs/gardena-smart-gateway-mt7688.h

@@ -36,7 +36,6 @@
 #define CONFIG_SYS_NS16550_CLK		40000000
 #define CONFIG_SYS_NS16550_REG_SIZE	-4
 #define CONFIG_SYS_NS16550_COM1		0xb0000c00
-#define CONFIG_CONS_INDEX		1
 #endif
 
 /* UART */

include/configs/linkit-smart-7688.h

@@ -36,7 +36,6 @@
 #define CONFIG_SYS_NS16550_CLK		40000000
 #define CONFIG_SYS_NS16550_REG_SIZE	-4
 #define CONFIG_SYS_NS16550_COM3		0xb0000e00
-#define CONFIG_CONS_INDEX		3
 
 #endif
 

include/configs/ls1021atsn.h

@@ -97,7 +97,6 @@
 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_SERIAL
 #ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1

include/configs/ls1028a_common.h

@@ -43,7 +43,6 @@
 #endif
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)

include/configs/mt7628.h

@@ -32,7 +32,6 @@
 #define CONFIG_SYS_NS16550_CLK		40000000
 #define CONFIG_SYS_NS16550_REG_SIZE	-4
 #define CONFIG_SYS_NS16550_COM1		0xb0000c00
-#define CONFIG_CONS_INDEX		1
 #endif
 
 /* Serial common */

include/configs/vcoreiii.h

@@ -34,8 +34,6 @@
 #error Unknown DDR size - please add!
 #endif
 
-#define CONFIG_CONS_INDEX		1
-
 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_MTDIDS_DEFAULT) && defined(CONFIG_MTDPARTS_DEFAULT)

include/configs/vocore2.h

@@ -34,7 +34,6 @@
 #define CONFIG_SYS_NS16550_CLK		40000000
 #define CONFIG_SYS_NS16550_REG_SIZE	-4
 #define CONFIG_SYS_NS16550_COM3		0xb0000e00
-#define CONFIG_CONS_INDEX		3
 
 /* RAM */
 

include/configs/x530.h

@@ -30,8 +30,6 @@
  * for your console driver.
  */
 
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-
 /* NAND */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE 1