mirror of
https://github.com/linux-sunxi/meta-sunxi.git
synced 2024-12-27 05:28:22 +01:00
2f84e8ff67
- Ethernet, WiFi, Bluetooth, USBs are working fine but HDMI is working until U-Boot loading the kernel. Then it stop working. - Tested with core-image-base and kernel mainline 6.6.28 Signed-off-by: alperak <alperyasinak1@gmail.com>
67 lines
1.8 KiB
Diff
67 lines
1.8 KiB
Diff
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
|
|
From: The-going <48602507+The-going@users.noreply.github.com>
|
|
Date: Mon, 24 Jan 2022 19:34:31 +0300
|
|
Subject: arm64:dts: sun50i-h5-orangepi-prime add regulator
|
|
|
|
---
|
|
.../allwinner/sun50i-h5-orangepi-prime.dts | 30 +++++++++++++++++++
|
|
1 file changed, 30 insertions(+)
|
|
|
|
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
|
|
index 998396bc0..6dc6850c1 100644
|
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
|
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
|
|
@@ -8,6 +8,7 @@
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
+#include <dt-bindings/pinctrl/sun4i-a10.h>
|
|
|
|
/ {
|
|
model = "Xunlong Orange Pi Prime";
|
|
@@ -93,6 +94,10 @@ wifi_pwrseq: wifi_pwrseq {
|
|
};
|
|
};
|
|
|
|
+&cpu0 {
|
|
+ cpu-supply = <®_vdd_cpux>;
|
|
+};
|
|
+
|
|
&codec {
|
|
allwinner,audio-routing =
|
|
"Line Out", "LINEOUT",
|
|
@@ -188,6 +193,31 @@ &ohci3 {
|
|
status = "okay";
|
|
};
|
|
|
|
+&r_i2c {
|
|
+ status = "okay";
|
|
+
|
|
+ reg_vdd_cpux: regulator@65 {
|
|
+ compatible = "silergy,sy8106a";
|
|
+ reg = <0x65>;
|
|
+ regulator-name = "vdd-cpux";
|
|
+ silergy,fixed-microvolt = <1200000>;
|
|
+ /*
|
|
+ * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
|
|
+ * however both the Armbian DVFS table and the official one
|
|
+ * have operating points with voltage under 1.1V, and both
|
|
+ * DVFS table are known to work properly at the lowest
|
|
+ * operating point.
|
|
+ *
|
|
+ * Use 1.0V as the minimum voltage instead.
|
|
+ */
|
|
+ regulator-min-microvolt = <1000000>;
|
|
+ regulator-max-microvolt = <1400000>;
|
|
+ regulator-ramp-delay = <200>;
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+};
|
|
+
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pa_pins>;
|
|
--
|
|
2.25.1
|