meta-sunxi/conf/machine
Diego Rondini 1d6ef084db Enable open source GPU support
Enable open source GPU support for Mali Utgard GPUs (lima driver) and
Mali Midgard and Bifrost GPUs (panfrost driver).
The support is enabled by:
- enabling DRM kernel CONFIGs
- enabling lima, panfrost and kmsro in Mesa
- disabling the specific mali driver overrides in sunxi-mali.inc
To enable open source mainline graphics support just add the following
line in your local.conf:

MACHINEOVERRIDES .= ":use-mailine-graphics"

Please note that some machines may need a bigger CMA value to be able to
start Weston. To do that, add e.g. "cma=128M" to the kernel parameters.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2020-03-18 21:36:14 +01:00
..
include Enable open source GPU support 2020-03-18 21:36:14 +01:00
bananapi.conf kernel: fix missing device tree, switch to mainline 2015-06-16 16:33:57 +02:00
cubieboard2.conf Fix cubieboard2.conf. 2015-06-26 12:16:52 +02:00
cubieboard.conf kernel: fix missing device tree, switch to mainline 2015-06-16 16:33:57 +02:00
cubietruck.conf kernel: fix missing device tree, switch to mainline 2015-06-16 16:33:57 +02:00
forfun-q88db.conf Use SOC_FAMILY to avoid the long list of COMPATIBLE_MACHINE 2015-06-16 00:45:08 +02:00
mele.conf kernel: fix missing device tree, switch to mainline 2015-06-16 16:33:57 +02:00
meleg.conf add missing _config to meleg 2015-08-10 15:02:07 +02:00
nanopi-m1-plus.conf machine: remove U-Boot PREFERRED_VERSION 2019-11-06 12:44:11 +00:00
nanopi-neo2.conf machine: remove U-Boot PREFERRED_VERSION 2019-11-06 12:44:11 +00:00
nanopi-neo-air.conf machine: remove U-Boot PREFERRED_VERSION 2019-11-06 12:44:11 +00:00
nanopi-neo-plus2.conf ap6212a.inc: add support for AMPAK 6212A 2019-12-05 10:05:54 +00:00
nanopi-neo.conf machine: remove U-Boot PREFERRED_VERSION 2019-11-06 12:44:11 +00:00
olinuxino-a10lime.conf kernel: fix missing device tree, switch to mainline 2015-06-16 16:33:57 +02:00
olinuxino-a10s.conf u-boot: add stable 2015.07 mainline 2015-06-21 18:08:00 +02:00
olinuxino-a13.conf kernel: fix missing device tree, switch to mainline 2015-06-16 16:33:57 +02:00
olinuxino-a13som.conf Use SOC_FAMILY to avoid the long list of COMPATIBLE_MACHINE 2015-06-16 00:45:08 +02:00
olinuxino-a20.conf olinuxino-a20: fix KERNEL_DEVICETREE 2015-07-29 14:29:40 +10:00
olinuxino-a20lime2-emmc.conf olinuxino-a20lime2-emmc: add configuration 2017-04-26 08:46:45 +00:00
olinuxino-a20lime2.conf olinuxino-a20lime2: fix UBOOT_MACHINE 2016-02-13 20:01:25 +01:00
olinuxino-a20lime.conf kernel: fix missing device tree, switch to mainline 2015-06-16 16:33:57 +02:00
olinuxino-a20som.conf Fix Olimex A20 SOM configuration 2017-01-18 21:39:50 +01:00
olinuxino-a64.conf Add wifi support for olinuxino-a64 2019-06-25 23:50:52 +02:00
orange-pi-one.conf machine: remove U-Boot PREFERRED_VERSION 2019-11-06 12:44:11 +00:00
orange-pi-pc-plus.conf machine: remove U-Boot PREFERRED_VERSION 2019-11-06 12:44:11 +00:00
orange-pi-pc.conf machine: remove U-Boot PREFERRED_VERSION 2019-11-06 12:44:11 +00:00
orange-pi-zero-plus2-h3.conf conf: machine: add orange-pi-zero-plus2-h3 2020-02-13 23:14:28 +00:00
orange-pi-zero-plus2.conf ap6212a.inc: add support for AMPAK 6212A 2019-12-05 10:05:54 +00:00
orange-pi-zero.conf machine: remove U-Boot PREFERRED_VERSION 2019-11-06 12:44:11 +00:00
pcduino3.conf Added pcDuino3 Board 2019-06-15 16:22:20 +02:00
pcduino.conf machine: remove U-Boot PREFERRED_VERSION 2019-11-06 12:44:11 +00:00
pine64-plus.conf machine: remove U-Boot PREFERRED_VERSION 2019-11-06 12:44:11 +00:00