mirror of
https://github.com/linux-sunxi/meta-sunxi.git
synced 2024-11-16 10:18:23 +01:00
61 lines
2.5 KiB
Diff
61 lines
2.5 KiB
Diff
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
|
|
From: =?UTF-8?q?Alejandro=20Gonz=C3=A1lez?=
|
|
<alejandro.gonzalez.correo@gmail.com>
|
|
Date: Sun, 25 Aug 2019 17:05:58 +0200
|
|
Subject: [PATCH] mmc: sunxi: fix unusuable eMMC on some H6 boards by disabling
|
|
DDR
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
Some Allwinner H6 boards have timing problems when dealing with
|
|
DDR-capable eMMC cards. These boards include the Pine H64 and Tanix TX6.
|
|
|
|
These timing problems result in out of sync communication between the
|
|
driver and the eMMC, which renders the memory unsuable for every
|
|
operation but some basic commmands, like reading the status register.
|
|
|
|
The cause of these timing problems is not yet well known, but they go
|
|
away by disabling DDR mode operation in the driver. Like on some H5
|
|
boards, it might be that the traces are not precise enough to support
|
|
these speeds. However, Jernej Skrabec compared the BSP driver with this
|
|
driver, and found that the BSP driver configures pinctrl to operate at
|
|
1.8 V when entering DDR mode (although 3.3 V operation is supported), while
|
|
the mainline kernel lacks any mechanism to switch voltages dynamically.
|
|
Finally, other possible cause might be some timing parameter that is
|
|
different on the H6 with respect to other SoCs.
|
|
|
|
Therefore, as this fix works reliably, the kernel lacks the required
|
|
dynamic pinctrl control for now and a slow eMMC is better than a not
|
|
working eMMC, just disable DDR operation for now on H6-compatible
|
|
devices.
|
|
|
|
Signed-off-by: Alejandro González <alejandro.gonzalez.correo@gmail.com>
|
|
---
|
|
drivers/mmc/host/sunxi-mmc.c | 9 ++++++---
|
|
1 file changed, 6 insertions(+), 3 deletions(-)
|
|
|
|
--- a/drivers/mmc/host/sunxi-mmc.c
|
|
+++ b/drivers/mmc/host/sunxi-mmc.c
|
|
@@ -1421,14 +1421,17 @@ static int sunxi_mmc_probe(struct platfo
|
|
|
|
/*
|
|
* Some H5 devices do not have signal traces precise enough to
|
|
- * use HS DDR mode for their eMMC chips.
|
|
+ * use HS DDR mode for their eMMC chips. Other H6 devices operate
|
|
+ * unreliably on HS DDR mode, too.
|
|
*
|
|
* We still enable HS DDR modes for all the other controller
|
|
- * variants that support them.
|
|
+ * variants that support them properly.
|
|
*/
|
|
if ((host->cfg->clk_delays || host->use_new_timings) &&
|
|
!of_device_is_compatible(pdev->dev.of_node,
|
|
- "allwinner,sun50i-h5-emmc"))
|
|
+ "allwinner,sun50i-h5-emmc") &&
|
|
+ !of_device_is_compatible(pdev->dev.of_node,
|
|
+ "allwinner,sun50i-h6-emmc"))
|
|
mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR;
|
|
|
|
ret = mmc_of_parse(mmc);
|