meta-sunxi ============== Official sunxi OpenEmbedded layer for Allwinner-based boards. This layer depends on the additional layers: * [meta-openembedded/meta-oe](http://git.openembedded.org/meta-openembedded/tree/meta-oe) Tested with core-image-base. Maintainers: * Nicolas Aguirre * Enrico Butera * Sergey Lapin * Marek Belisko Kernel / U-Boot Version =========== Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default. Legacy sunxi Kernel / U-Boot ----------- There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined. These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline. If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either: - change the file conf/machine/include/sunxi.inc to include the following block - edit your conf/local.conf to add the following block PREFERRED_PROVIDER_u-boot="u-boot-sunxi" PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi" PREFERRED_PROVIDER_virtual/kernel="linux-sunxi" KERNEL_DEVICETREE = "" If you already have built the mainline versions it might be necessary to reset the build directories with: bitbake -c clean virtual/kernel virtual/bootloader Mainline Kernel / U-Boot ----------- For mainline kernel we have now support for latest LTS and stable. By default we use latest LTS. If you would like to change version please update ```PREFERRED_VERSION_linux-mainline``` in: * [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/fa0846c0eb23e3424b89acb4d5a327e921f73497/conf/machine/include/sunxi.inc#L16) When using mainline kernel ≥ 5.2 it is now possible to use the mainline graphics drivers *lima* and *panfrost*, instead of the *mali* driver provided by ARM. To enable open source mainline graphics support add the following line in your `local.conf`: MACHINEOVERRIDES .= ":use-mailine-graphics" Performance =========== The default machine settings are meant to be the lowest common denominator, maximizing generality. Significantly better performance (2x-3x) can be achieved with the following settings: **_Allwinner A20_** For Allwinner A20 (Cubieboard2/CubieTruck), the following tuning options are recommended: _Enable hardfloat, thumb2 and neon capabilities_ DEFAULTTUNE = "cortexa7hf-neon-vfpv4" This tuning profile takes advantage of the Allwinner A20 hardfloat, neon and vfpv4 capabilities. _Change CPU governor to ondemand, and tune settings_ echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor echo 336000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq echo 912000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq #More aggressive #echo 1008000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq echo 40 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold echo 200000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate This code changes the default CPU governor from _fantasy_ to _ondemand_, and tunes its settings, as recommended at http://linux-sunxi.org/Cpufreq For additional discussion, see https://github.com/linux-sunxi/meta-sunxi/issues/25