conf/machine/include/sun9i.inc

@@ -1,5 +0,0 @@
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa15.inc
-
-SOC_FAMILY = "sun9i"

conf/machine/merrii-a80-optimus.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: Merrii A80 Optimus
-#@DESCRIPTION: Machine configuration for the Merrii A80 Optimus, based on Allwinner A80 CPU https://linux-sunxi.org/Merrii_A80_Optimus_Board
-
-require conf/machine/include/sun9i.inc
-
-KERNEL_IMAGETYPE = "zImage"
-
-KERNEL_DEVICETREE = "sun9i-a80-optimus.dtb"
-UBOOT_MACHINE = "Merrii_A80_Optimus_defconfig"

recipes-bsp/u-boot/files/0001-Revert-sunxi-board-simplify-early-PMIC-setup-conditi.patch

@@ -1,108 +0,0 @@
-From b75fa85deb7099916493ff9cc582c0956121238e Mon Sep 17 00:00:00 2001
-From: Leon Anavi <leon.anavi@konsulko.com>
-Date: Mon, 9 Dec 2024 14:02:07 +0000
-Subject: [PATCH] Revert "sunxi: board: simplify early PMIC setup conditions"
-
-This reverts commit ffb02942fab024d4a9b6a3346b9791457e272ff4.
-
-Upstream-Status: Inappropriate
-
-Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
----
- board/sunxi/board.c   | 32 ++++++++++++++++++--------------
- drivers/power/Kconfig |  2 +-
- 2 files changed, 19 insertions(+), 15 deletions(-)
-
-diff --git a/board/sunxi/board.c b/board/sunxi/board.c
-index 02fc3eef00..39ecbe988f 100644
---- a/board/sunxi/board.c
-+++ b/board/sunxi/board.c
-@@ -581,46 +581,50 @@ void sunxi_board_init(void)
- 		}
- 	}
- 
--#ifdef CONFIG_AXP_DCDC1_VOLT
-+#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \
-+	defined CONFIG_AXP818_POWER
- 	power_failed |= axp_set_dcdc1(CONFIG_AXP_DCDC1_VOLT);
--	power_failed |= axp_set_dcdc5(CONFIG_AXP_DCDC5_VOLT);
- #endif
--#ifdef CONFIG_AXP_DCDC2_VOLT
-+#if !defined(CONFIG_AXP305_POWER)
- 	power_failed |= axp_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
- 	power_failed |= axp_set_dcdc3(CONFIG_AXP_DCDC3_VOLT);
- #endif
--#ifdef CONFIG_AXP_DCDC4_VOLT
-+#if !defined(CONFIG_AXP209_POWER) && !defined(CONFIG_AXP818_POWER)
- 	power_failed |= axp_set_dcdc4(CONFIG_AXP_DCDC4_VOLT);
- #endif
-+#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \
-+	defined CONFIG_AXP818_POWER
-+	power_failed |= axp_set_dcdc5(CONFIG_AXP_DCDC5_VOLT);
-+#endif
- 
--#ifdef CONFIG_AXP_ALDO1_VOLT
-+#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \
-+	defined CONFIG_AXP818_POWER
- 	power_failed |= axp_set_aldo1(CONFIG_AXP_ALDO1_VOLT);
- #endif
--#ifdef CONFIG_AXP_ALDO2_VOLT
-+#if !defined(CONFIG_AXP305_POWER)
- 	power_failed |= axp_set_aldo2(CONFIG_AXP_ALDO2_VOLT);
- #endif
--#ifdef CONFIG_AXP_ALDO3_VOLT
-+#if !defined(CONFIG_AXP152_POWER) && !defined(CONFIG_AXP305_POWER)
- 	power_failed |= axp_set_aldo3(CONFIG_AXP_ALDO3_VOLT);
- #endif
--#ifdef CONFIG_AXP_ALDO4_VOLT
-+#ifdef CONFIG_AXP209_POWER
- 	power_failed |= axp_set_aldo4(CONFIG_AXP_ALDO4_VOLT);
- #endif
- 
--#ifdef CONFIG_AXP_DLDO1_VOLT
-+#if defined(CONFIG_AXP221_POWER) || defined(CONFIG_AXP809_POWER) || \
-+	defined(CONFIG_AXP818_POWER)
- 	power_failed |= axp_set_dldo(1, CONFIG_AXP_DLDO1_VOLT);
- 	power_failed |= axp_set_dldo(2, CONFIG_AXP_DLDO2_VOLT);
--#endif
--#ifdef CONFIG_AXP_DLDO3_VOLT
-+#if !defined CONFIG_AXP809_POWER
- 	power_failed |= axp_set_dldo(3, CONFIG_AXP_DLDO3_VOLT);
- 	power_failed |= axp_set_dldo(4, CONFIG_AXP_DLDO4_VOLT);
- #endif
--#ifdef CONFIG_AXP_ELDO1_VOLT
- 	power_failed |= axp_set_eldo(1, CONFIG_AXP_ELDO1_VOLT);
- 	power_failed |= axp_set_eldo(2, CONFIG_AXP_ELDO2_VOLT);
- 	power_failed |= axp_set_eldo(3, CONFIG_AXP_ELDO3_VOLT);
- #endif
- 
--#ifdef CONFIG_AXP_FLDO1_VOLT
-+#ifdef CONFIG_AXP818_POWER
- 	power_failed |= axp_set_fldo(1, CONFIG_AXP_FLDO1_VOLT);
- 	power_failed |= axp_set_fldo(2, CONFIG_AXP_FLDO2_VOLT);
- 	power_failed |= axp_set_fldo(3, CONFIG_AXP_FLDO3_VOLT);
-@@ -629,7 +633,7 @@ void sunxi_board_init(void)
- #if defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
- 	power_failed |= axp_set_sw(IS_ENABLED(CONFIG_AXP_SW_ON));
- #endif
--#endif	/* CONFIG_AXPxxx_POWER */
-+#endif
- 	printf("DRAM:");
- 	gd->ram_size = sunxi_dram_init();
- 	printf(" %d MiB\n", (int)(gd->ram_size >> 20));
-diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
-index 83cb31c937..7f3b990d23 100644
---- a/drivers/power/Kconfig
-+++ b/drivers/power/Kconfig
-@@ -180,7 +180,7 @@ config AXP_DCDC3_VOLT
- 
- config AXP_DCDC4_VOLT
- 	int "axp pmic dcdc4 voltage"
--	depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP305_POWER
-+	depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP305_POWER
- 	default 1250 if AXP152_POWER
- 	default 1200 if MACH_SUN6I
- 	default 0 if MACH_SUN8I
--- 
-2.47.0
-

recipes-bsp/u-boot/u-boot_%.bbappend

@@ -3,7 +3,7 @@ FILESEXTRAPATHS:prepend:sunxi := "${THISDIR}/files:"
 DEPENDS:append:sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
 DEPENDS:append:sun50i = " trusted-firmware-a"
 
-COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun9i|sun50i)"
+COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
 
 DEFAULT_PREFERENCE:sun4i = "1"
 DEFAULT_PREFERENCE:sun5i = "1"
@@ -19,10 +19,6 @@ SRC_URI:append:sunxi = " \
     file://boot.cmd \
 "
 
-SRC_URI:append:sun9i = " \
-    file://0001-Revert-sunxi-board-simplify-early-PMIC-setup-conditi.patch \
-"
-
 SRC_URI:append:mangopi-mq-t-t113 = " \
     file://0004-mangopi-mq-r-t113-Fix-serial-console.patch \
     "

recipes-kernel/linux/linux-mainline.inc

@@ -1,7 +1,7 @@
 SECTION = "kernel"
 LICENSE = "GPL-2.0-only"
 LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun9i|sun50i)"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
 
 inherit kernel