Orange Pi Zero Plus2 board is based on AllWinner H5 SoC.
For more details on its hardware see linux-sunxi wiki:
http://linux-sunxi.org/Xunlong_Orange_Pi_Zero_Plus_2
This patch enables basic support for orange-pi-zero-plus2 board:
- mainline kernel 4.14.2
- mainline u-boot 2017.11
- dts kernel patch that fixes boot from SD card
- dts kernel patch enabling AP6212 WiFi/BT chip
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Add support of sun50i SoC family to u-boot recipe:
- move SPL_BINARY to sunxi.inc and sunxi64.inc
-- different SoC families have different SPL_BINARY names
- create separate boot.cmd files for arm and aarch64
-- different kernel image types require different boot commands
- add atf-sunxi dependency
-- u-boot for aarch64 needs ATF BL31 binary
- add do_compile_sun50i[depends]
-- make sure that BL31 binary is already deployed before u-boot build
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Follow the same approach as in 32-bit sunxi SoC families:
- create sunxi64.inc: umbrella description for aarch64 sunxi
-- specify proper u-boot/spl image types
-- specify proper kernel image type
-- specify u-boot/kernel preferred providers
- create basic description of sun50i SoC family
-- sun50i SoC family is based on armv8
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
- remove older stable release recipes
- bump stable linux recipe to 4.14.2
- bump git linux recipe to 4.15-rc1
- rename linux to linux-mainline
Renaming kernel recipe from 'linux' to 'linux-mainline' is needed to
get ready for adding aarch64 support. The reason is in the value of
OVERRIDES environment variable. BitBake uses OVERRIDES to control what
variables are overridden after BitBake parses recipes and configuration
files. So packages names are not allowed to take values listed in
OVERRIDES. One of the OVERRIDES values is TARGET_OS:
TARGET_OS = linux${LIBCEXTENSION}${ABIEXTENSION}
For arm architecture TARGET_OS = "linux-gnueabi". However for aarch64
architecture TARGET_OS = "linux". As a result, in the case of aarch64
kernel package can not be named 'linux'. This patch renames kernel
package name to 'linux-mainline' in order to be able to maintain the
same kernel recipes for both arm and aarch64 boards.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Update stable to 4.13.4 version thus removing backported patch and requirement
of git version for several boards (current stable 4.13 is newer than previous
git 4.11).
Additionally update git version to 4.14-rc3.
Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
Add machine description for Orange Pi Zero board. Detailed hardware
overview is available at the following linux-sunxi wiki page:
http://linux-sunxi.org/Orange_Pi_Zero
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Bump preferred u-boot release version and kernel git version:
- kernel 4.11.0-rc5
- u-boot 2017.03
Update preferred versions of u-boot and kernel for all the
boards that are using them: nanopi-neo, orange-pi-one, pcduino.
The purpose of this update is to get the latest features for
sun8i cores including SPI support and orange-pi-zero support
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Add support for LinkSprite pcDuino1 device and its flavors
including pcduino-lite and pcduino-lite-wifi:
- add pcduino machine description
- enable CONFIG_SPI_SPIDEV in upstream kernel defconfig to provide simple userspace access
to SPI devices on Arduino shields
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Mainline u-boot uses a different name for the configuration for the Mele G.
Use correct name for mainline, use old name for sunxi u-boot.
Signed-off-by: Jens Lucius <info@jenslucius.com>
Add new stable 2015.07 mainline u-boot version.
Add correct mainline u-boot names to machine configs.
Add overwrite for different names for old sunxi u-boot.
Signed-off-by: Jens Lucius <info@jenslucius.com>
- Add back missing device tree definitions in machine files
- Switch to mainline kernel by default
- Add description to switch back to sunxi versions in README
Signed-off-by: Jens Lucius <info@jenslucius.com>
It uses 3 different SOC_FAMILY sun4i,sun5i,sun7i this list come from here http://sunxi.org/Allwinner_SoC_Family
Adding a new machine should be now more easy, as we have now to only create a new machine.conf file, set the right SOC_FAMILY and include the right arch inclue.
Move device tree configuration to machine files. Check for device tree
in sd card creation and include device tree file in first partition.
Signed-off-by: Jens Lucius <info@jenslucius.com>
Set the PREFERRED_PROVIDER_u-boot and _virtual/bootloader to u-boot.
Preperation for adding mainline u-boot.
Signed-off-by: Jens Lucius <info@jenslucius.com>
Set the preferred kernel to 3.4 in sunxi.inc. This makes it easier
to upgrade the kernel in a later commit without breaking build.
Signed-off-by: Jens Lucius <info@jenslucius.com>
This add the first 7 characters of the git sha-1 to the compiled in
u-boot version.
With this change the serial console displays the following version information:
U-Boot 2014.04-gee425f9 (Oct 01 2014 - 22:20:35) Allwinner Technology
Without the version looks like this:
U-Boot 2014.04 (Oct 01 2014 - 21:55:57) Allwinner Technology
Signed-off-by: Christian Ege <k4230r6@gmail.com>
The latest revision of U-Boot requires changing the U-Boot machine names for
olimex based boards, as these were changed in U-Boot.
U-Boot tested on Olimex A20 Olinuxino
Signed-off-by: Jens Lucius <info@jenslucius.com>
Recent u-boots (e.g. 2014.04-rc) need the _config appended to work, so
add that and sync the names with boards.cfg as well.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
- add correct xorg config
- For mali-sunxi driver to work it also need library files from sunxi-mali-dev
package. Adding sunxi-mali-dev to XSERVER force the installation of
the -dev
