- Ethernet, WiFi, Bluetooth, USBs are working fine but HDMI is working until U-Boot loading the kernel. Then it stop working.
- Tested with core-image-base and kernel mainline 6.6.28
Signed-off-by: alperak <alperyasinak1@gmail.com>
With my device, around one boot out of 3 was not able to finish. I found that the mmc
order was not correct in that cases.
Fix: enforcing device order in DTS.
Enable open source GPU support for Mali Utgard GPUs (lima driver) and
Mali Midgard and Bifrost GPUs (panfrost driver).
The support is enabled by:
- enabling DRM kernel CONFIGs
- enabling lima, panfrost and kmsro in Mesa
- disabling the specific mali driver overrides in sunxi-mali.inc
To enable open source mainline graphics support just add the following
line in your local.conf:
MACHINEOVERRIDES .= ":use-mailine-graphics"
Please note that some machines may need a bigger CMA value to be able to
start Weston. To do that, add e.g. "cma=128M" to the kernel parameters.
Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
Use .inc file to share common code and parameters. Also, always apply
orange-pi-zero wifi patch unconditionally: it is easier to spot build
issues while updating recipes if patch is applied regardless of the
machine we're building on.
Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
Currently, only one of the exposed USB ports works because we haven't
loaded the sunxi musb driver, which enables the OTG port to act in host
mode.
After enabling this driver in the config, both ports work correctly.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Bump Linux kernel version to 4.15.
Notes:
- orange-pi-zero-plus2: drop patch fixing sdcard detect
-- this fix is already in 4.15
- H2+/H3 SoCs: in 4.15 ethernet works right out of the box
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Orange Pi Zero Plus2 board is based on AllWinner H5 SoC.
For more details on its hardware see linux-sunxi wiki:
http://linux-sunxi.org/Xunlong_Orange_Pi_Zero_Plus_2
This patch enables basic support for orange-pi-zero-plus2 board:
- mainline kernel 4.14.2
- mainline u-boot 2017.11
- dts kernel patch that fixes boot from SD card
- dts kernel patch enabling AP6212 WiFi/BT chip
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
There is no common kernel defconfig for both arm and aarch64.
Create separate kernel defconfigs in arm and aarch64 subdirectories.
Proper defconfig will be selected in build time
according to target architecture.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
- Add back missing device tree definitions in machine files
- Switch to mainline kernel by default
- Add description to switch back to sunxi versions in README
Signed-off-by: Jens Lucius <info@jenslucius.com>
