this is integrate in kernel mainline since 88c23c05ef (diff-9c6eb3684dca738538e1dcb691cb9dd7684d6d5da0e963b5ba5a7e47b8b95e21) and breaks the build

Signed-off-by: mpromonet <michel.promonet@free.fr>
This commit is contained in:
mpromonet 2021-11-11 18:58:01 +01:00
parent 080eb40635
commit 7bc87817a1
3 changed files with 0 additions and 85 deletions

View File

@ -21,7 +21,6 @@ KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
S = "${WORKDIR}/linux-${PV}" S = "${WORKDIR}/linux-${PV}"
SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \ SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \
file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
file://0001-dts-orange-pi-zero-Add-wifi-support.patch \ file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
file://defconfig \ file://defconfig \
" "

View File

@ -1,80 +0,0 @@
From 4ca766a768e783ee5198f1935b7f46a5df9b4a35 Mon Sep 17 00:00:00 2001
From: Jelle van der Waa <jelle@vdwaa.nl>
Date: Tue, 23 Jan 2018 15:58:44 -0800
Subject: [PATCH] ARM: dts: nanopi-neo-air: Add WiFi / eMMC
Enable the WiFi (AP6212) chip and eMMC support for the NanoPi NEO Air.
This patch was originally submitted by Jelle van der Waa. Martin Kelly
modified it to compile on the latest kernel, fixed up some review
comments from Maxime Ripard, and re-tested the patch.
The patch has been reworked to add back eMMC support which has been left
out at the last backport.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: linux-sunxi@googlegroups.com
Cc: devicetree@vger.kernel.org
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Florin Sarbu <florin@resin.io>
---
arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 34 +++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
index 03ff6f8..a9331fe 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
@@ -72,6 +72,11 @@
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
};
};
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ };
};
&mmc0 {
@@ -84,6 +89,35 @@
status = "okay";
};
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>;
+ vmmc-supply = <&reg_vcc3v3>;
+ vqmmc-supply = <&reg_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ vqmmc-supply = <&reg_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--
2.11.0

View File

@ -124,9 +124,5 @@ do_configure:append() {
fi fi
} }
do_install:append() {
oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix}/src/linux-${KERNEL_VERSION} ARCH=$ARCH
}
PACKAGES =+ "kernel-headers" PACKAGES =+ "kernel-headers"
FILES_kernel-headers = "${exec_prefix}/src/linux*" FILES_kernel-headers = "${exec_prefix}/src/linux*"