diff --git a/classes/sdcard_image-a10.bbclass b/classes/sdcard_image-a10.bbclass
index 79ecec8..7a648a3 100644
--- a/classes/sdcard_image-a10.bbclass
+++ b/classes/sdcard_image-a10.bbclass
@@ -50,10 +50,6 @@ IMAGE_CMD_a10-sdimg () {
 	# Initialize sdcard image file
 	dd if=/dev/zero of=${SDIMG} bs=1 count=0 seek=$(expr 1024 \* ${SDIMG_SIZE})
 
-	#write u-boot-spl.bin and u-boot
-	dd if=${DEPLOY_DIR_IMAGE}/sunxi-spl.bin of=${SDIMG} bs=1024 seek=8 conv=notrunc
-	dd if=${DEPLOY_DIR_IMAGE}/u-boot.bin of=${SDIMG} bs=1024 seek=32 conv=notrunc
-
 	# Create partition table
 	parted -s ${SDIMG} mklabel msdos
 	# Create boot partition and mark it as bootable
@@ -82,4 +78,8 @@ IMAGE_CMD_a10-sdimg () {
 	else
 		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
 	fi
+
+	#write u-boot-spl.bin and u-boot
+	dd if=${DEPLOY_DIR_IMAGE}/sunxi-spl.bin of=${SDIMG} bs=1024 seek=8 conv=notrunc
+	dd if=${DEPLOY_DIR_IMAGE}/u-boot.bin of=${SDIMG} bs=1024 seek=32 conv=notrunc
 }
diff --git a/recipes-graphics/tslib/tslib/0001-Support-reading-coordinates-from-multitouch-devices.patch b/recipes-graphics/tslib/tslib/0001-Support-reading-coordinates-from-multitouch-devices.patch
new file mode 100644
index 0000000..c4d0d0b
--- /dev/null
+++ b/recipes-graphics/tslib/tslib/0001-Support-reading-coordinates-from-multitouch-devices.patch
@@ -0,0 +1,79 @@
+From c525c0b5d8eada982c99442454fcf7b8364e10b3 Mon Sep 17 00:00:00 2001
+From: Florian Boor <florian@kernelconcepts.de>
+Date: Fri, 1 Apr 2011 23:30:21 +0200
+Subject: [PATCH] Support reading coordinates from multitouch devices.
+
+Signed-off-by: Florian Boor <florian@kernelconcepts.de>
+Signed-off-by: Christopher Larson <kergoth@gmail.com>
+---
+ plugins/input-raw.c | 33 +++++++++++++++++++++++----------
+ 1 file changed, 23 insertions(+), 10 deletions(-)
+
+diff --git a/plugins/input-raw.c b/plugins/input-raw.c
+index 4396eab..1e48505 100644
+--- a/plugins/input-raw.c
++++ b/plugins/input-raw.c
+@@ -40,6 +40,11 @@
+ # define KEY_CNT (KEY_MAX+1)
+ #endif
+ 
++#ifndef ABS_MT_POSITION_X
++# define ABS_MT_POSITION_X       0x35    /* Center X ellipse position */
++# define ABS_MT_POSITION_Y       0x36    /* Center Y ellipse position */
++#endif
++
+ #include "tslib-private.h"
+ 
+ #define GRAB_EVENTS_WANTED	1
+@@ -160,16 +165,17 @@ static int ts_input_read(struct tslib_module_info *inf,
+ 				}
+ 				break;
+ 			case EV_SYN:
+-				/* Fill out a new complete event */
+-				if (pen_up) {
+-					samp->x = 0;
+-					samp->y = 0;
+-					samp->pressure = 0;
+-					pen_up = 0;
+-				} else {
+-					samp->x = i->current_x;
+-					samp->y = i->current_y;
+-					samp->pressure = i->current_p;
++				if (ev.code == SYN_REPORT) {
++					/* Fill out a new complete event */
++					if (pen_up) {
++						samp->x = 0;
++						samp->y = 0;
++						samp->pressure = 0;
++						pen_up = 0;
++					} else {
++						samp->x = i->current_x;
++						samp->y = i->current_y;
++						samp->pressure = i->current_p;
+ 				}
+ 				samp->tv = ev.time;
+ 	#ifdef DEBUG
+@@ -179,6 +185,7 @@ static int ts_input_read(struct tslib_module_info *inf,
+ 	#endif /* DEBUG */
+ 				samp++;
+ 				total++;
++				}
+ 				break;
+ 			case EV_ABS:
+ 				switch (ev.code) {
+@@ -188,6 +195,12 @@ static int ts_input_read(struct tslib_module_info *inf,
+ 				case ABS_Y:
+ 					i->current_y = ev.value;
+ 					break;
++				case ABS_MT_POSITION_X:
++					i->current_x = ev.value;
++					break;
++				case ABS_MT_POSITION_Y:
++					i->current_y = ev.value;
++					break;
+ 				case ABS_PRESSURE:
+ 					i->current_p = ev.value;
+ 					break;
+-- 
+1.8.1.4
+
diff --git a/recipes-graphics/tslib/tslib_git.bbappend b/recipes-graphics/tslib/tslib_git.bbappend
index 82bec0f..db6f5f1 100644
--- a/recipes-graphics/tslib/tslib_git.bbappend
+++ b/recipes-graphics/tslib/tslib_git.bbappend
@@ -2,9 +2,6 @@ FILESEXTRAPATHS := "${THISDIR}/${PN}"
 
 PRINC := "${@int(PRINC) + 1}"
 
-SRC_URI = "git://github.com/kergoth/tslib.git \
-           file://ts.conf \
-           file://tslib.sh \
-           file://tslib.patch"
+SRC_URI += "file://0001-Support-reading-coordinates-from-multitouch-devices.patch \ 
+            file://tslib.patch"
 
-SRCREV = "f6c499a523bff845ddd57b1d96c9d1389f0df17b"
diff --git a/recipes-kernel/linux/linux.inc b/recipes-kernel/linux/linux.inc
index 783fd0d..493616c 100644
--- a/recipes-kernel/linux/linux.inc
+++ b/recipes-kernel/linux/linux.inc
@@ -6,262 +6,111 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
 
 inherit kernel siteinfo
 
-# Try to build & install perf
-#require recipes-kernel/linux/linux-tools.inc
-
-RPSRC = "http://www.rpsys.net/openzaurus/patches/archive"
-
 # Enable OABI compat for people stuck with obsolete userspace
 ARM_KEEP_OABI ?= "1"
 
 # Quirk for udev greater or equal 141
-UDEV_GE_141 ?= "0"
-
-# Specify the commandline for your device
-
-# Boot from mmc
-CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=/dev/mmcblk0p1 rootfstype=ext2 rootdelay=5"
-# Boot from nfs
-#CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=301 root=/dev/nfs nfsroot=172.20.3.1:/data/at91 ip=172.20.0.5:::255.255.0.0"
+UDEV_GE_141 ?= "1"
 
 # Set the verbosity of kernel messages during runtime
-# You can define CMDLINE_DEBUG in your local.conf or distro.conf to override this behaviour  
+# You can define CMDLINE_DEBUG in your local.conf or distro.conf to override this behaviour
 CMDLINE_DEBUG ?= '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug", d)}'
-CMDLINE_append = " ${CMDLINE_DEBUG} "
+CMDLINE_append = " ${CMDLINE_DEBUG}"
 
-# Kernel bootlogo is distro-specific (default is OE logo).
-# Logo resolution (qvga, vga, ...) is machine-specific.
-LOGO_SIZE ?= "."
-
-# Support for binary device tree generation
-
-FILES_kernel-devicetree = "/boot/devicetree*"
-
-KERNEL_DEVICETREE_boc01 = "${WORKDIR}/boc01.dts"
-KERNEL_DEVICETREE_calamari = "arch/${ARCH}/boot/dts/mpc8536ds.dts"
-KERNEL_DEVICETREE_canyonlands = "arch/${ARCH}/boot/dts/canyonlands.dts"
-KERNEL_DEVICETREE_kilauea = "arch/${ARCH}/boot/dts/kilauea.dts"
-KERNEL_DEVICETREE_lite5200 = "arch/${ARCH}/boot/dts/lite5200.dts"
-KERNEL_DEVICETREE_lsppchd = "arch/${ARCH}/boot/dts/kuroboxHD.dts"
-KERNEL_DEVICETREE_lsppchg = "arch/${ARCH}/boot/dts/kuroboxHG.dts"
-KERNEL_DEVICETREE_mpc8313e-rdb = "arch/${ARCH}/boot/dts/mpc8313erdb.dts"
-KERNEL_DEVICETREE_mpc8315e-rdb = "arch/${ARCH}/boot/dts/mpc8315erdb.dts"
-KERNEL_DEVICETREE_mpc8323e-rdb = "arch/${ARCH}/boot/dts/mpc832x_rdb.dts"
-KERNEL_DEVICETREE_mpc8544ds = "arch/${ARCH}/boot/dts/mpc8544ds.dts"
-KERNEL_DEVICETREE_mpc8641-hpcn = "arch/${ARCH}/boot/dts/mpc8641_hpcn.dts"
-KERNEL_DEVICETREE_p1020rdb = "arch/${ARCH}/boot/dts/p1020rdb.dts"
-KERNEL_DEVICETREE_p2020ds = "arch/${ARCH}/boot/dts/p2020ds.dts"
-KERNEL_DEVICETREE_sequoia = "arch/${ARCH}/boot/dts/sequoia.dts"
-KERNEL_DEVICETREE_tqm8540 = "arch/${ARCH}/boot/dts/tqm8540.dts"
-KERNEL_DEVICETREE_xilinx-ml507 = "arch/${ARCH}/boot/dts/virtex440-ml507.dts"
-
-KERNEL_DEVICETREE_FLAGS = "-R 8 -S 0x3000"
-
-CORTEXA8FIXUP ?= "yes"
-
-python __anonymous () {
-
-    import bb
-    
-    devicetree = bb.data.getVar('KERNEL_DEVICETREE', d, 1) or ''
-    if devicetree:
-    	depends = bb.data.getVar("DEPENDS", d, 1)
-    	bb.data.setVar("DEPENDS", "%s dtc-native" % depends, d)
-    	packages = bb.data.getVar("PACKAGES", d, 1)
-    	bb.data.setVar("PACKAGES", "%s kernel-devicetree" % packages, d)
-}
-
-do_configure_prepend() {
-
-        # Rename getline in ./scripts/unifdef.c
-        # Kernels up to 2.6.29 are currently failing to build unifdef.c,
-        # clashing with exposed getline() from <stdio.h>
-        # see https://patchwork.kernel.org/patch/11166/
-        # committed in 2.6.29 (commit d15bd1067b1fcb2b7250d22bc0c7c7fea0b759f7)
-
-        sed -i -e 's/getline/parseline/g' ${S}/scripts/unifdef.c
-
-
-        echo "" > ${S}/.config
-
-        #
-        # logo support, if you supply logo_linux_clut224.ppm in SRC_URI, then it's going to be used
-        #
-        if [ -e ${WORKDIR}/${LOGO_SIZE}/logo_linux_clut224.ppm ]; then
-                install -m 0644 ${WORKDIR}/${LOGO_SIZE}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm
-                echo "CONFIG_LOGO=y"                    >> ${S}/.config
-                echo "CONFIG_LOGO_LINUX_CLUT224=y"      >> ${S}/.config
-        fi
-
-        #
-        # oabi / eabi support
-        #
-        if [ "${TARGET_OS}" = "linux-gnueabi" -o  "${TARGET_OS}" = "linux-uclibceabi" ]; then
-                echo "CONFIG_AEABI=y"                   >> ${S}/.config
-                if [ "${ARM_KEEP_OABI}" = "1" ] ; then
-                        echo "CONFIG_OABI_COMPAT=y"             >> ${S}/.config
-                else
-                        echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
-                fi
-        else
-                echo "# CONFIG_AEABI is not set"        >> ${S}/.config
-                echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
-        fi
-
-        # When enabling thumb for userspace we also need thumb support in the kernel
-        if [ "${ARM_INSTRUCTION_SET}" = "thumb" ] ; then
-            sed -i -e /CONFIG_ARM_THUMB/d ${WORKDIR}/defconfig 
-            echo "CONFIG_ARM_THUMB=y" >> ${S}/.config
-        fi
-
-        # Enable thumb2 fixup for specific issue in angstrom toolchains when used on A8 r1p[012] silicon
-        if [ "${CORTEXA8FIXUP}" = "yes" ] ; then
-            sed -i -e /CONFIG_ARM_ERRATA_430973/d ${WORKDIR}/defconfig
-            echo "CONFIG_ARM_ERRATA_430973=y" >> ${S}/.config
-        fi
-
-	#
-	# endian support
-	#
-        if [ "${SITEINFO_ENDIANNESS}" = "be" ]; then
-                echo "CONFIG_CPU_BIG_ENDIAN=y"          >> ${S}/.config
-        fi
-
-        echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config
-
-        sed -e '/CONFIG_AEABI/d' \
-            -e '/CONFIG_OABI_COMPAT=/d' \
-            -e '/CONFIG_CMDLINE=/d' \
-            -e '/CONFIG_CPU_BIG_ENDIAN/d' \
-            -e '/CONFIG_LOGO=/d' \
-            -e '/CONFIG_LOGO_LINUX_CLUT224=/d' \
-            -e '/CONFIG_LOCALVERSION/d' \
-            -e '/CONFIG_LOCALVERSION_AUTO/d' \
-	    < '${WORKDIR}/defconfig' >>'${S}/.config'
-
-        echo 'CONFIG_LOCALVERSION=""' >>${S}/.config
-        echo '# CONFIG_LOCALVERSION_AUTO is not set' >>${S}/.config
-
-        #
-        # Udev quirks
-        #
-
-        # Newer versions of udev mandate that sysfs doesn't have deprecated entries
-        if [ "${UDEV_GE_141}" = "1" ] ; then
-            sed -e /CONFIG_SYSFS_DEPRECATED/d \
-                -e /CONFIG_SYSFS_DEPRECATED_V2/d \
-                -e /CONFIG_HOTPLUG/d \
-                -e /CONFIG_UEVENT_HELPER_PATH/d \
-                -e /CONFIG_UNIX/d \
-                -e /CONFIG_SYSFS/d \
-                -e /CONFIG_PROC_FS/d \
-                -e /CONFIG_TMPFS/d \
-                -e /CONFIG_INOTIFY_USER/d \
-                -e /CONFIG_SIGNALFD/d \
-                -e /CONFIG_TMPFS_POSIX_ACL/d \
-                -e /CONFIG_BLK_DEV_BSG/d \
-                -i '${S}/.config'
-
-            echo '# CONFIG_SYSFS_DEPRECATED is not set' >> ${S}/.config
-            echo '# CONFIG_SYSFS_DEPRECATED_V2 is not set' >> ${S}/.config
-            echo 'CONFIG_HOTPLUG=y' >> ${S}/.config
-            echo 'CONFIG_UEVENT_HELPER_PATH=""' >> ${S}/.config
-            echo 'CONFIG_UNIX=y' >> ${S}/.config
-            echo 'CONFIG_SYSFS=y' >> ${S}/.config
-            echo 'CONFIG_PROC_FS=y' >> ${S}/.config
-            echo 'CONFIG_TMPFS=y' >> ${S}/.config
-            echo 'CONFIG_INOTIFY_USER=y' >> ${S}/.config
-            echo 'CONFIG_SIGNALFD=y' >> ${S}/.config
-            echo 'CONFIG_TMPFS_POSIX_ACL=y' >> ${S}/.config
-            echo 'CONFIG_BLK_DEV_BSG=y' >> ${S}/.config
-            echo 'CONFIG_DEVTMPFS=y' >> ${S}/.config
-            echo 'CONFIG_DEVTMPFS_MOUNT=y' >> ${S}/.config
-        fi
-
-        # Newer inits like systemd need cgroup support
-        if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then
-            sed -e /CONFIG_CGROUP_SCHED/d \
-                -e /CONFIG_CGROUPS/d \
-                -i '${S}/.config'
-            
-            echo 'CONFIG_CGROUP_SCHED=y' >> ${S}/.config
-            echo 'CONFIG_CGROUPS=y' >> ${S}/.config
-            echo 'CONFIG_CGROUP_NS=y' >> ${S}/.config
-            echo 'CONFIG_CGROUP_FREEZER=y' >> ${S}/.config
-            echo 'CONFIG_CGROUP_DEVICE=y' >> ${S}/.config
-            echo 'CONFIG_CPUSETS=y' >> ${S}/.config
-            echo 'CONFIG_PROC_PID_CPUSET=y' >> ${S}/.config
-            echo 'CONFIG_CGROUP_CPUACCT=y' >> ${S}/.config
-            echo 'CONFIG_RESOURCE_COUNTERS=y' >> ${S}/.config
-        fi
-
-        #
-        # root-over-nfs-over-usb-eth support. Limited, but should cover some cases.
-        # Enable this by setting a proper CMDLINE_NFSROOT_USB.
-        #
-        if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
-                oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
-                sed -e '/CONFIG_INET/d' \
-                    -e '/CONFIG_IP_PNP=/d' \
-                    -e '/CONFIG_USB_GADGET=/d' \
-                    -e '/CONFIG_USB_GADGET_SELECTED=/d' \
-                    -e '/CONFIG_USB_ETH=/d' \
-                    -e '/CONFIG_NFS_FS=/d' \
-                    -e '/CONFIG_ROOT_NFS=/d' \
-                    -e '/CONFIG_CMDLINE=/d' \
-                    -i ${S}/.config
-                echo "CONFIG_INET=y"                     >> ${S}/.config
-                echo "CONFIG_IP_PNP=y"                   >> ${S}/.config
-                echo "CONFIG_USB_GADGET=y"               >> ${S}/.config
-                echo "CONFIG_USB_GADGET_SELECTED=y"      >> ${S}/.config
-                echo "CONFIG_USB_ETH=y"                  >> ${S}/.config
-                echo "CONFIG_NFS_FS=y"                   >> ${S}/.config
-                echo "CONFIG_ROOT_NFS=y"                 >> ${S}/.config
-                echo "CONFIG_CMDLINE=\"${CMDLINE_NFSROOT_USB}\"" >> ${S}/.config
-        fi
-		yes '' | oe_runmake oldconfig
-}
-
-do_configure_append() {
-        if test -e scripts/Makefile.fwinst ; then
-		sed -i -e "s:-m0644:-m 0644:g" scripts/Makefile.fwinst
+# Set a variable in .configure
+# $1 - Configure variable to be set
+# $2 - value [n/y/value]
+kernel_configure_variable() {
+	# Remove the config
+	CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;"
+	if test "$2" = "n"
+	then
+		echo "# CONFIG_$1 is not set" >> ${S}/.config
+	else
+		echo "CONFIG_$1=$2" >> ${S}/.config
 	fi
 }
 
-# bitbake.conf only prepends PARALLEL make in tasks called do_compile, which isn't the case for compile_modules
-# So explicitly enable it for that in here
-EXTRA_OEMAKE = "${PARALLEL_MAKE} "
+do_configure_prepend() {
+	# Clean .config
+	echo "" > ${S}/.config
+	CONF_SED_SCRIPT=""
 
-do_install_append() {
-	oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix}/src/linux-${KERNEL_VERSION} ARCH=$ARCH
-}
+	# oabi / eabi support
+	if [ "${TARGET_OS}" = "linux-gnueabi" -o  "${TARGET_OS}" = "linux-uclibceabi" ]; then
+		kernel_configure_variable AEABI y
+		if [ "${ARM_KEEP_OABI}" = "1" ] ; then
+			kernel_configure_variable OABI_COMPAT y
+		else
+			kernel_configure_variable OABI_COMPAT n
+		fi
+	else
+		kernel_configure_variable AEABI n
+		kernel_configure_variable OABI_COMPAT n
+	fi
 
-PACKAGES =+ "kernel-headers"
-FILES_kernel-headers = "${exec_prefix}/src/linux*"
+	# Set cmdline
+	kernel_configure_variable CMDLINE "\"${CMDLINE}\""
 
-do_devicetree_image() {
-    if test -n "${KERNEL_DEVICETREE}" ; then
-        dtc -I dts -O dtb ${KERNEL_DEVICETREE_FLAGS} -o devicetree ${KERNEL_DEVICETREE}
-        install -d ${D}/boot
-        install -m 0644 devicetree ${D}/boot/devicetree-${KERNEL_VERSION}
-        install -d ${DEPLOY_DIR_IMAGE}
-        install -m 0644 devicetree ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.dtb
-        package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.dtb
-        cd ${DEPLOY_DIR_IMAGE}
-        rm -f ${KERNEL_IMAGE_SYMLINK_NAME}.dtb
-        ln -sf ${KERNEL_IMAGE_BASE_NAME}.dtb ${KERNEL_IMAGE_SYMLINK_NAME}.dtb
-        package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_SYMLINK_NAME}.dtb
-    fi
-}
+	# Localversion
+	kernel_configure_variable LOCALVERSION "\"\""
+	kernel_configure_variable LOCALVERSION_AUTO n
 
-addtask devicetree_image after do_install before do_package do_deploy
+	# Udev quirks
+	# Newer versions of udev mandate that sysfs doesn't have deprecated entries
+	if [ "${UDEV_GE_141}" = "1" ] ; then
+		kernel_configure_variable SYSFS_DEPRECATED n
+		kernel_configure_variable SYSFS_DEPRECATED_V2 n
+		kernel_configure_variable HOTPLUG y
+		kernel_configure_variable UEVENT_HELPER_PATH "\"\""
+		kernel_configure_variable UNIX y
+		kernel_configure_variable SYSFS y
+		kernel_configure_variable PROC_FS y
+		kernel_configure_variable TMPFS y
+		kernel_configure_variable INOTIFY_USER y
+		kernel_configure_variable SIGNALFD y
+		kernel_configure_variable TMPFS_POSIX_ACL y
+		kernel_configure_variable BLK_DEV_BSG y
+		kernel_configure_variable DEVTMPFS y
+		kernel_configure_variable DEVTMPFS_MOUNT y
+	fi
 
-pkg_postinst_kernel-devicetree () {
-	cd /${KERNEL_IMAGEDEST}; update-alternatives --install /${KERNEL_IMAGEDEST}/devicetree devicetree devicetree-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
-}
+	# Newer inits like systemd need cgroup support
+	if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then
+		kernel_configure_variable CGROUP_SCHED y
+		kernel_configure_variable CGROUPS y
+		kernel_configure_variable CGROUP_NS y
+		kernel_configure_variable CGROUP_FREEZER y
+		kernel_configure_variable CGROUP_DEVICE y
+		kernel_configure_variable CPUSETS y
+		kernel_configure_variable PROC_PID_CPUSET y
+		kernel_configure_variable CGROUP_CPUACCT y
+		kernel_configure_variable RESOURCE_COUNTERS y
+	fi
 
-pkg_postrm_kernel-devicetree () {
-	cd /${KERNEL_IMAGEDEST}; update-alternatives --remove devicetree devicetree-${KERNEL_VERSION} || true
+	# root-over-nfs-over-usb-eth support. Limited, but should cover some cases
+	# Enable this by setting a proper CMDLINE_NFSROOT_USB.
+	if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
+		oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
+		kernel_configure_variable INET y
+		kernel_configure_variable IP_PNP y
+		kernel_configure_variable USB_GADGET y
+		kernel_configure_variable USB_GADGET_SELECTED y
+		kernel_configure_variable USB_ETH y
+		kernel_configure_variable NFS_FS y
+		kernel_configure_variable ROOT_NFS y
+		kernel_configure_variable ROOT_NFS y
+		kernel_configure_variable CMDLINE "\"${CMDLINE_NFSROOT_USB}\""
+	fi
+
+	# Activate CONFIG_LEGACY_PTYS
+	kernel_configure_variable LEGACY_PTYS y
+
+	# Keep this the last line
+	# Remove all modified configs and add the rest to .config
+	sed -e "${CONF_SED_SCRIPT}" < '${WORKDIR}/defconfig' >> '${S}/.config'
+
+	yes '' | oe_runmake oldconfig
 }
 
 # Automatically depend on lzop-native if CONFIG_KERNEL_LZO is enabled
diff --git a/recipes-kernel/linux/linux_3.0.bb b/recipes-kernel/linux/linux_3.0.bb
index d22091c..ee4a502 100644
--- a/recipes-kernel/linux/linux_3.0.bb
+++ b/recipes-kernel/linux/linux_3.0.bb
@@ -6,11 +6,11 @@ KERNEL_IMAGETYPE = "uImage"
 
 COMPATIBLE_MACHINE = "(mele|olinuxino-a13|cubieboard)"
 
-PR = "7"
+PR = "8"
 
 PV = "3.0.62"
 # Last tested version by myself"
-SRCREV_pn-${PN} = "978ecddd4211a53e4efbcddaf09e17f5e34d8b04"
+SRCREV_pn-${PN} = "caa11e27c061ed279f6d7e1d85df7d0caa650878"
 
 MACHINE_KERNEL_PR_append = "a"