Merge pull request #405 from ludiazv/new-opi3-lts

Basic support for orange pi 3 lts
This commit is contained in:
Marek Belisko 2024-05-07 13:46:31 +02:00 committed by GitHub
commit 197bc04dac
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
57 changed files with 448948 additions and 5 deletions

View File

@ -4,6 +4,7 @@ include conf/machine/include/soc-family.inc
MACHINEOVERRIDES =. "sunxi:sunxi64:"
PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
PREFERRED_VERSION_linux-mainline ?= "6.6.%"
PREFERRED_PROVIDER_u-boot ?= "u-boot"
PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

View File

@ -0,0 +1,28 @@
#@TYPE: Machine
#@NAME: orange-pi-3lts
#@DESCRIPTION: Machine configuration for the Orange Pi 3 LTS , based on Allwinner H6 CPU
# Note: Some boards have faulty RTC a fix is included by default
# a workarround in the dts ins include by default but in can removed adding
# KERNEL_FEATURES:remove = " bsp/orange-pi-3lts/fix-rtc.scc" to local.conf
require conf/machine/include/sun50i-h6.inc
KERNEL_DEVICETREE = "allwinner/sun50i-h6-orangepi-3-lts.dtb"
UBOOT_MACHINE = "orangepi_3_lts_defconfig"
SPL_BINARY = "u-boot-sunxi-with-spl.bin"
# as for now neither graphics nor audio is supported
MACHINE_FEATURES:remove = " x11 alsa rtc"
MACHINE_FEATURES:append = " bluetooth wifi"
# fiwrware needed for wifi + bt
MACHINE_EXTRA_RRECOMMENDS += " uwe5622-firmware"
# Load modules for wifi & bt
# Note: fo wifi a custom hci attach userspace sofware is needed that is not included in the layer
KERNEL_MODULE_AUTOLOAD += " sprdwl_ng sprdbt_tty "

View File

@ -0,0 +1,421 @@
From 9966dda20246285abf8b417bd251d5a4bea3e423 Mon Sep 17 00:00:00 2001
From: Juliano Dorigão <jdorigao@gmail.com>
Date: Fri, 3 Mar 2023 16:11:30 -0400
Subject: [PATCH] OrangePi 3 LTS support
Upstream-Status: Pending
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun50i-h6-orangepi-3-lts.dts | 361 ++++++++++++++++++++++
configs/orangepi_3_lts_defconfig | 19 ++
3 files changed, 381 insertions(+)
create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3-lts.dts
create mode 100644 configs/orangepi_3_lts_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 43951a77..8dbbb6f4 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -710,6 +710,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
dtb-$(CONFIG_MACH_SUN50I_H6) += \
sun50i-h6-beelink-gs1.dtb \
sun50i-h6-orangepi-3.dtb \
+ sun50i-h6-orangepi-3-lts.dtb \
sun50i-h6-orangepi-lite2.dtb \
sun50i-h6-orangepi-one-plus.dtb \
sun50i-h6-pine-h64.dtb \
diff --git a/arch/arm/dts/sun50i-h6-orangepi-3-lts.dts b/arch/arm/dts/sun50i-h6-orangepi-3-lts.dts
new file mode 100644
index 00000000..67f38b8a
--- /dev/null
+++ b/arch/arm/dts/sun50i-h6-orangepi-3-lts.dts
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2023 Jernej Skrabec <jernej.skrabec@gmail.com>
+// Based on sun50i-h6-orangepi-3.dts, which is:
+// Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi 3 LTS";
+ compatible = "xunlong,orangepi-3-lts", "allwinner,sun50i-h6";
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "orangepi:red:power";
+ gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ };
+
+ led-1 {
+ label = "orangepi:green:status";
+ gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+ default-state = "on";
+ };
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC jack */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <150000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+ };
+
+ reg_vcc33_wifi: vcc33-wifi {
+ /* Always on 3.3V regulator for WiFi and BT */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc33-wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ };
+
+ reg_vcc_wifi_io: vcc-wifi-io {
+ /* Always on 1.8V/300mA regulator for WiFi and BT IO */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-wifi-io";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ vin-supply = <&reg_vcc33_wifi>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
+ reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+ status = "okay";
+};
+
+&dwc3 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ext_rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <&reg_gmac_3v3>;
+ allwinner,rx-delay-ps = <1500>;
+ allwinner,tx-delay-ps = <700>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&reg_dcdcc>;
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <&reg_bldo2>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+
+ reset-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
+ reset-assert-us = <15000>;
+ reset-deassert-us = <40000>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_cldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <&reg_vcc33_wifi>;
+ vqmmc-supply = <&reg_vcc_wifi_io>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <&reg_cldo1>;
+ vqmmc-supply = <&reg_bldo2>;
+ cap-mmc-hw-reset;
+ non-removable;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pc-supply = <&reg_bldo2>;
+ vcc-pd-supply = <&reg_cldo1>;
+ vcc-pg-supply = <&reg_bldo3>;
+};
+
+&r_ir {
+ status = "okay";
+};
+
+&r_rsb {
+ clock-frequency = <100000>;
+ status = "okay";
+
+ axp805: pmic@745 {
+ compatible = "x-powers,axp805", "x-powers,axp806";
+ reg = <0x745>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ x-powers,self-working-mode;
+ vina-supply = <&reg_vcc5v>;
+ vinb-supply = <&reg_vcc5v>;
+ vinc-supply = <&reg_vcc5v>;
+ vind-supply = <&reg_vcc5v>;
+ vine-supply = <&reg_vcc5v>;
+ aldoin-supply = <&reg_vcc5v>;
+ bldoin-supply = <&reg_vcc5v>;
+ cldoin-supply = <&reg_vcc5v>;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl-led-ir";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-audio-tv-ephy-mac";
+ };
+
+ /* ALDO3 is shorted to CLDO1 */
+ reg_aldo3: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18-dram-bias-pll";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-efuse-pcie-hdmi-pc";
+ };
+
+ reg_bldo3: bldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pm-pg-dcxoio-wifi";
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
+ };
+
+ cldo2 {
+ /* unused */
+ };
+
+ cldo3 {
+ /* unused */
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-ramp-delay = <2500>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-ramp-delay = <2500>;
+ regulator-name = "vdd-gpu";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <980000>;
+ regulator-max-microvolt = <980000>;
+ regulator-name = "vdd-sys";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&pwm {
+ status = "okay";
+};
+
+&r_ir {
+ status = "okay";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+/delete-node/ &spi0;
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&usb2otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb2phy {
+ usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
+ usb0_vbus-supply = <&reg_vcc5v>;
+ usb3_vbus-supply = <&reg_vcc5v>;
+ status = "okay";
+};
+
+&usb3phy {
+ status = "okay";
+};
diff --git a/configs/orangepi_3_lts_defconfig b/configs/orangepi_3_lts_defconfig
new file mode 100644
index 00000000..41a9af4e
--- /dev/null
+++ b/configs/orangepi_3_lts_defconfig
@@ -0,0 +1,19 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-3-lts"
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H6=y
+CONFIG_SUNXI_DRAM_H6_LPDDR3=y
+CONFIG_MMC0_CD_PIN="PF6"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x118000
+CONFIG_SYS_PBSIZE=1024
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_PHY_SUN50I_USB3=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
--
2.39.2

View File

@ -16,6 +16,7 @@ SRC_URI:append:sunxi = " \
file://0002-Added-nanopi-r1-board-support.patch \
file://0003-sunxi-H6-Enable-Ethernet-on-Orange-Pi-One-Plus.patch \
file://0004-mangopi-mq-r-t113-Fix-serial-console.patch \
file://0004-OrangePi-3-LTS-support.patch \
file://boot.cmd \
"

View File

@ -45,6 +45,7 @@ KRELEASE = "${@d.getVar('PV', True).split('.')[0]}"
SRC_URI = "https://www.kernel.org/pub/linux/kernel/v${KRELEASE}.x/linux-${PV}.tar.xz \
file://defconfig \
file://sunxi-kmeta;type=kmeta;name=sunxi-kmeta;destsuffix=sunxi-kmeta \
"
# append patches for kernels before 6.5 and after based on version

View File

@ -0,0 +1,142 @@
From 91b69779e0875e58d8973b2938a1cc4b7a1c455b Mon Sep 17 00:00:00 2001
From: Jonas Karlman <jonas@kwiboo.se>
Date: Sun, 25 Mar 2018 22:17:06 +0200
Subject: [PATCH 22/44] ASoC: hdmi-codec: fix channel allocation
---
sound/soc/codecs/hdmi-codec.c | 113 ++++++++++++++++------------------
1 file changed, 52 insertions(+), 61 deletions(-)
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -194,78 +194,69 @@ static const struct snd_pcm_chmap_elem h
*/
static const struct hdmi_codec_cea_spk_alloc hdmi_codec_channel_alloc[] = {
{ .ca_id = 0x00, .n_ch = 2,
- .mask = FL | FR},
- /* 2.1 */
- { .ca_id = 0x01, .n_ch = 4,
- .mask = FL | FR | LFE},
- /* Dolby Surround */
+ .mask = FL | FR },
+ { .ca_id = 0x03, .n_ch = 4,
+ .mask = FL | FR | LFE | FC },
{ .ca_id = 0x02, .n_ch = 4,
.mask = FL | FR | FC },
- /* surround51 */
+ { .ca_id = 0x01, .n_ch = 4,
+ .mask = FL | FR | LFE },
{ .ca_id = 0x0b, .n_ch = 6,
- .mask = FL | FR | LFE | FC | RL | RR},
- /* surround40 */
- { .ca_id = 0x08, .n_ch = 6,
- .mask = FL | FR | RL | RR },
- /* surround41 */
- { .ca_id = 0x09, .n_ch = 6,
- .mask = FL | FR | LFE | RL | RR },
- /* surround50 */
+ .mask = FL | FR | LFE | FC | RL | RR },
{ .ca_id = 0x0a, .n_ch = 6,
.mask = FL | FR | FC | RL | RR },
- /* 6.1 */
- { .ca_id = 0x0f, .n_ch = 8,
- .mask = FL | FR | LFE | FC | RL | RR | RC },
- /* surround71 */
+ { .ca_id = 0x09, .n_ch = 6,
+ .mask = FL | FR | LFE | RL | RR },
+ { .ca_id = 0x08, .n_ch = 6,
+ .mask = FL | FR | RL | RR },
+ { .ca_id = 0x07, .n_ch = 6,
+ .mask = FL | FR | LFE | FC | RC },
+ { .ca_id = 0x06, .n_ch = 6,
+ .mask = FL | FR | FC | RC },
+ { .ca_id = 0x05, .n_ch = 6,
+ .mask = FL | FR | LFE | RC },
+ { .ca_id = 0x04, .n_ch = 6,
+ .mask = FL | FR | RC },
{ .ca_id = 0x13, .n_ch = 8,
.mask = FL | FR | LFE | FC | RL | RR | RLC | RRC },
- /* others */
- { .ca_id = 0x03, .n_ch = 8,
- .mask = FL | FR | LFE | FC },
- { .ca_id = 0x04, .n_ch = 8,
- .mask = FL | FR | RC},
- { .ca_id = 0x05, .n_ch = 8,
- .mask = FL | FR | LFE | RC },
- { .ca_id = 0x06, .n_ch = 8,
- .mask = FL | FR | FC | RC },
- { .ca_id = 0x07, .n_ch = 8,
- .mask = FL | FR | LFE | FC | RC },
- { .ca_id = 0x0c, .n_ch = 8,
- .mask = FL | FR | RC | RL | RR },
- { .ca_id = 0x0d, .n_ch = 8,
- .mask = FL | FR | LFE | RL | RR | RC },
- { .ca_id = 0x0e, .n_ch = 8,
- .mask = FL | FR | FC | RL | RR | RC },
- { .ca_id = 0x10, .n_ch = 8,
- .mask = FL | FR | RL | RR | RLC | RRC },
- { .ca_id = 0x11, .n_ch = 8,
- .mask = FL | FR | LFE | RL | RR | RLC | RRC },
+ { .ca_id = 0x1f, .n_ch = 8,
+ .mask = FL | FR | LFE | FC | RL | RR | FLC | FRC },
{ .ca_id = 0x12, .n_ch = 8,
.mask = FL | FR | FC | RL | RR | RLC | RRC },
- { .ca_id = 0x14, .n_ch = 8,
- .mask = FL | FR | FLC | FRC },
- { .ca_id = 0x15, .n_ch = 8,
- .mask = FL | FR | LFE | FLC | FRC },
- { .ca_id = 0x16, .n_ch = 8,
- .mask = FL | FR | FC | FLC | FRC },
- { .ca_id = 0x17, .n_ch = 8,
- .mask = FL | FR | LFE | FC | FLC | FRC },
- { .ca_id = 0x18, .n_ch = 8,
- .mask = FL | FR | RC | FLC | FRC },
- { .ca_id = 0x19, .n_ch = 8,
- .mask = FL | FR | LFE | RC | FLC | FRC },
- { .ca_id = 0x1a, .n_ch = 8,
- .mask = FL | FR | RC | FC | FLC | FRC },
- { .ca_id = 0x1b, .n_ch = 8,
- .mask = FL | FR | LFE | RC | FC | FLC | FRC },
- { .ca_id = 0x1c, .n_ch = 8,
- .mask = FL | FR | RL | RR | FLC | FRC },
- { .ca_id = 0x1d, .n_ch = 8,
- .mask = FL | FR | LFE | RL | RR | FLC | FRC },
{ .ca_id = 0x1e, .n_ch = 8,
.mask = FL | FR | FC | RL | RR | FLC | FRC },
- { .ca_id = 0x1f, .n_ch = 8,
- .mask = FL | FR | LFE | FC | RL | RR | FLC | FRC },
+ { .ca_id = 0x11, .n_ch = 8,
+ .mask = FL | FR | LFE | RL | RR | RLC | RRC },
+ { .ca_id = 0x1d, .n_ch = 8,
+ .mask = FL | FR | LFE | RL | RR | FLC | FRC },
+ { .ca_id = 0x10, .n_ch = 8,
+ .mask = FL | FR | RL | RR | RLC | RRC },
+ { .ca_id = 0x1c, .n_ch = 8,
+ .mask = FL | FR | RL | RR | FLC | FRC },
+ { .ca_id = 0x0f, .n_ch = 8,
+ .mask = FL | FR | LFE | FC | RL | RR | RC },
+ { .ca_id = 0x1b, .n_ch = 8,
+ .mask = FL | FR | LFE | RC | FC | FLC | FRC },
+ { .ca_id = 0x0e, .n_ch = 8,
+ .mask = FL | FR | FC | RL | RR | RC },
+ { .ca_id = 0x1a, .n_ch = 8,
+ .mask = FL | FR | RC | FC | FLC | FRC },
+ { .ca_id = 0x0d, .n_ch = 8,
+ .mask = FL | FR | LFE | RL | RR | RC },
+ { .ca_id = 0x19, .n_ch = 8,
+ .mask = FL | FR | LFE | RC | FLC | FRC },
+ { .ca_id = 0x0c, .n_ch = 8,
+ .mask = FL | FR | RC | RL | RR },
+ { .ca_id = 0x18, .n_ch = 8,
+ .mask = FL | FR | RC | FLC | FRC },
+ { .ca_id = 0x17, .n_ch = 8,
+ .mask = FL | FR | LFE | FC | FLC | FRC },
+ { .ca_id = 0x16, .n_ch = 8,
+ .mask = FL | FR | FC | FLC | FRC },
+ { .ca_id = 0x15, .n_ch = 8,
+ .mask = FL | FR | LFE | FLC | FRC },
+ { .ca_id = 0x14, .n_ch = 8,
+ .mask = FL | FR | FLC | FRC },
};
struct hdmi_codec_priv {

View File

@ -0,0 +1,53 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Sat, 16 Jan 2021 10:58:14 +0100
Subject: [PATCH] HACK: h6: Add HDMI sound card
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -108,6 +108,24 @@
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ sound_hdmi: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "allwinner-hdmi";
+ simple-audio-card,mclk-fs = <128>;
+ simple-audio-card,frame-inversion;
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <32>;
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -664,7 +682,6 @@
dmas = <&dma 4>, <&dma 4>;
resets = <&ccu RST_BUS_I2S1>;
dma-names = "rx", "tx";
- status = "disabled";
};
spdif: spdif@5093000 {
@@ -801,6 +818,7 @@
};
hdmi: hdmi@6000000 {
+ #sound-dai-cells = <0>;
compatible = "allwinner,sun50i-h6-dw-hdmi";
reg = <0x06000000 0x10000>;
reg-io-width = <1>;

View File

@ -0,0 +1,52 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sat, 2 Jan 2021 15:52:27 -0600
Subject: [PATCH] Input: axp20x-pek - allow wakeup after shutdown
While the AXP20x PMIC handles the power button itself after shutting
down, it is not always possible to use the PMIC's built-in shutdown
feature, such as when other wakeup sources are needed (for example, an
IR remote or wake-on-LAN) that require firmware support. In that case,
the PMIC remains on, but suspended, until the board is powered back on.
During this "fake" off state, IRQ configuration is similar to system
sleep, where enable_irq_wake() must be call on an IRQ for it to be
wakeup capable. Run the suspend callback to arm the power button IRQs
during the shutdown process, so the power button works in this state.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/input/misc/axp20x-pek.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/input/misc/axp20x-pek.c
+++ b/drivers/input/misc/axp20x-pek.c
@@ -354,7 +354,7 @@ static int axp20x_pek_probe(struct platf
return 0;
}
-static int __maybe_unused axp20x_pek_suspend(struct device *dev)
+static int axp20x_pek_suspend(struct device *dev)
{
struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
@@ -413,6 +413,11 @@ static const struct dev_pm_ops axp20x_pe
#endif
};
+static void axp20x_pek_shutdown(struct platform_device *pdev)
+{
+ axp20x_pek_suspend(&pdev->dev);
+}
+
static const struct platform_device_id axp_pek_id_match[] = {
{
.name = "axp20x-pek",
@@ -428,6 +433,7 @@ MODULE_DEVICE_TABLE(platform, axp_pek_id
static struct platform_driver axp20x_pek_driver = {
.probe = axp20x_pek_probe,
+ .shutdown = axp20x_pek_shutdown,
.id_table = axp_pek_id_match,
.driver = {
.name = "axp20x-pek",

View File

@ -0,0 +1,36 @@
From dbf607d6716dd0a314d734cfd9423601d6c5a99d Mon Sep 17 00:00:00 2001
From: OpenEmbedded <oe.patch@oe>
Date: Wed, 6 Dec 2023 18:01:24 +0100
Subject: [PATCH] Input: axp20x-pek - allow wakeup after shutdown
---
drivers/input/misc/axp20x-pek.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c
index 4581606a2..7217dc6ed 100644
--- a/drivers/input/misc/axp20x-pek.c
+++ b/drivers/input/misc/axp20x-pek.c
@@ -393,6 +393,11 @@ static const struct dev_pm_ops axp20x_pek_pm_ops = {
.resume_noirq = pm_sleep_ptr(axp20x_pek_resume_noirq),
};
+static void axp20x_pek_shutdown(struct platform_device *pdev)
+{
+ axp20x_pek_suspend(&pdev->dev);
+}
+
static const struct platform_device_id axp_pek_id_match[] = {
{
.name = "axp20x-pek",
@@ -408,6 +413,7 @@ MODULE_DEVICE_TABLE(platform, axp_pek_id_match);
static struct platform_driver axp20x_pek_driver = {
.probe = axp20x_pek_probe,
+ .shutdown = axp20x_pek_shutdown,
.id_table = axp_pek_id_match,
.driver = {
.name = "axp20x-pek",
--
2.43.0

View File

@ -0,0 +1,393 @@
From 20d3d43d9daa82d5fa1e937e17b975974572d189 Mon Sep 17 00:00:00 2001
From: Juliano Dorigão <jdorigao@gmail.com>
Date: Fri, 3 Mar 2023 16:12:03 -0400
Subject: [PATCH] OrangePi 3 LTS support
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../allwinner/sun50i-h6-orangepi-3-lts.dts | 361 ++++++++++++++++++
2 files changed, 362 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3-lts.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 6a96494a2..ace8159a6 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-beelink-gs1.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3-lts.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3-lts.dts
new file mode 100644
index 000000000..67f38b8a1
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3-lts.dts
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2023 Jernej Skrabec <jernej.skrabec@gmail.com>
+// Based on sun50i-h6-orangepi-3.dts, which is:
+// Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi 3 LTS";
+ compatible = "xunlong,orangepi-3-lts", "allwinner,sun50i-h6";
+
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "orangepi:red:power";
+ gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ };
+
+ led-1 {
+ label = "orangepi:green:status";
+ gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+ default-state = "on";
+ };
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC jack */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <150000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+ };
+
+ reg_vcc33_wifi: vcc33-wifi {
+ /* Always on 3.3V regulator for WiFi and BT */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc33-wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ };
+
+ reg_vcc_wifi_io: vcc-wifi-io {
+ /* Always on 1.8V/300mA regulator for WiFi and BT IO */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-wifi-io";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ vin-supply = <&reg_vcc33_wifi>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
+ reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+ status = "okay";
+};
+
+&dwc3 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ext_rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <&reg_gmac_3v3>;
+ allwinner,rx-delay-ps = <1500>;
+ allwinner,tx-delay-ps = <700>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&reg_dcdcc>;
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <&reg_bldo2>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+
+ reset-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
+ reset-assert-us = <15000>;
+ reset-deassert-us = <40000>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_cldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <&reg_vcc33_wifi>;
+ vqmmc-supply = <&reg_vcc_wifi_io>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <&reg_cldo1>;
+ vqmmc-supply = <&reg_bldo2>;
+ cap-mmc-hw-reset;
+ non-removable;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pc-supply = <&reg_bldo2>;
+ vcc-pd-supply = <&reg_cldo1>;
+ vcc-pg-supply = <&reg_bldo3>;
+};
+
+&r_ir {
+ status = "okay";
+};
+
+&r_rsb {
+ clock-frequency = <100000>;
+ status = "okay";
+
+ axp805: pmic@745 {
+ compatible = "x-powers,axp805", "x-powers,axp806";
+ reg = <0x745>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ x-powers,self-working-mode;
+ vina-supply = <&reg_vcc5v>;
+ vinb-supply = <&reg_vcc5v>;
+ vinc-supply = <&reg_vcc5v>;
+ vind-supply = <&reg_vcc5v>;
+ vine-supply = <&reg_vcc5v>;
+ aldoin-supply = <&reg_vcc5v>;
+ bldoin-supply = <&reg_vcc5v>;
+ cldoin-supply = <&reg_vcc5v>;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl-led-ir";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-audio-tv-ephy-mac";
+ };
+
+ /* ALDO3 is shorted to CLDO1 */
+ reg_aldo3: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18-dram-bias-pll";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-efuse-pcie-hdmi-pc";
+ };
+
+ reg_bldo3: bldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pm-pg-dcxoio-wifi";
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
+ };
+
+ cldo2 {
+ /* unused */
+ };
+
+ cldo3 {
+ /* unused */
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-ramp-delay = <2500>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-ramp-delay = <2500>;
+ regulator-name = "vdd-gpu";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <980000>;
+ regulator-max-microvolt = <980000>;
+ regulator-name = "vdd-sys";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&pwm {
+ status = "okay";
+};
+
+&r_ir {
+ status = "okay";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+/delete-node/ &spi0;
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&usb2otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb2phy {
+ usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
+ usb0_vbus-supply = <&reg_vcc5v>;
+ usb3_vbus-supply = <&reg_vcc5v>;
+ status = "okay";
+};
+
+&usb3phy {
+ status = "okay";
+};
--
2.39.2

View File

@ -0,0 +1,49 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Mon, 30 Dec 2019 12:39:31 -0600
Subject: [PATCH] Revert "clk: qcom: Support 'protected-clocks' property"
Now that protected-clocks is handled in the clk core, this
driver-specific implementation is redundant.
This reverts commit b181b3b801da8893c8eb706e448dd5111b02de60.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/clk/qcom/common.c | 18 ------------------
1 file changed, 18 deletions(-)
--- a/drivers/clk/qcom/common.c
+++ b/drivers/clk/qcom/common.c
@@ -194,22 +194,6 @@ int qcom_cc_register_sleep_clk(struct de
}
EXPORT_SYMBOL_GPL(qcom_cc_register_sleep_clk);
-/* Drop 'protected-clocks' from the list of clocks to register */
-static void qcom_cc_drop_protected(struct device *dev, struct qcom_cc *cc)
-{
- struct device_node *np = dev->of_node;
- struct property *prop;
- const __be32 *p;
- u32 i;
-
- of_property_for_each_u32(np, "protected-clocks", prop, p, i) {
- if (i >= cc->num_rclks)
- continue;
-
- cc->rclks[i] = NULL;
- }
-}
-
static struct clk_hw *qcom_cc_clk_hw_get(struct of_phandle_args *clkspec,
void *data)
{
@@ -272,8 +256,6 @@ int qcom_cc_really_probe(struct platform
cc->rclks = rclks;
cc->num_rclks = num_clks;
- qcom_cc_drop_protected(dev, cc);
-
for (i = 0; i < num_clk_hws; i++) {
ret = devm_clk_hw_register(dev, clk_hws[i]);
if (ret)

View File

@ -0,0 +1,67 @@
From ba3b30a80ac2c388d48c58fbee242466d51fbfd8 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sun, 6 Dec 2020 11:15:34 -0600
Subject: [PATCH 177/389] arm64: dts: allwinner: Enforce consistent MMC
numbering
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 6 ++++++
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 6 ++++++
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 6 ++++++
3 files changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 77b5349f6087..9e0e17179839 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -18,6 +18,12 @@ / {
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ mmc2 = &mmc2;
+ };
+
chosen {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index a56fae761a1f..2159fa336d75 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -6,6 +6,12 @@
#include <dt-bindings/thermal/thermal.h>
/ {
+ aliases {
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ mmc2 = &mmc2;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index ca1d287a0a01..3feac99556f3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -17,6 +17,12 @@ / {
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ mmc2 = &mmc2;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
--
2.35.3

View File

@ -0,0 +1,110 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Fri, 16 Aug 2019 16:40:20 +0200
Subject: [PATCH] arm64: dts: allwinner: h6: Add AC200 EPHY related nodes
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 56 ++++++++++++++++++++
1 file changed, 56 insertions(+)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -16,6 +16,16 @@
#address-cells = <1>;
#size-cells = <1>;
+ ac200_pwm_clk: ac200_clk {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ pwms = <&pwm 1 42 0>;
+ status = "disabled";
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -319,6 +329,10 @@
cpu_speed_grade: cpu-speed-grade@1c {
reg = <0x1c 0x4>;
};
+
+ ephy_calib: ephy_calib@2c {
+ reg = <0x2c 0x2>;
+ };
};
timer@3009000 {
@@ -373,6 +387,13 @@
drive-strength = <40>;
};
+ ext_rmii_pins: rmii_pins {
+ pins = "PA0", "PA1", "PA2", "PA3", "PA4",
+ "PA5", "PA6", "PA7", "PA8", "PA9";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
hdmi_pins: hdmi-pins {
pins = "PH8", "PH9", "PH10";
function = "hdmi";
@@ -393,6 +414,11 @@
function = "i2c2";
};
+ i2c3_pins: i2c3-pins {
+ pins = "PB17", "PB18";
+ function = "i2c3";
+ };
+
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
@@ -419,6 +445,11 @@
bias-pull-up;
};
+ pwm1_pin: pwm1-pin {
+ pins = "PB19";
+ function = "pwm1";
+ };
+
/omit-if-no-ref/
spi0_pins: spi0-pins {
pins = "PC0", "PC2", "PC3";
@@ -652,6 +683,31 @@
#size-cells = <0>;
};
+ i2c3: i2c@5002c00 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x05002c00 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C3>;
+ resets = <&ccu RST_BUS_I2C3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ac200: mfd@10 {
+ compatible = "x-powers,ac200";
+ reg = <0x10>;
+ clocks = <&ac200_pwm_clk>;
+
+ ac200_ephy: phy {
+ compatible = "x-powers,ac200-ephy";
+ nvmem-cells = <&ephy_calib>;
+ nvmem-cell-names = "ephy_calib";
+ };
+ };
+ };
+
emac: ethernet@5020000 {
compatible = "allwinner,sun50i-h6-emac",
"allwinner,sun50i-a64-emac";

View File

@ -0,0 +1,46 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sat, 14 Dec 2019 20:54:40 -0600
Subject: [PATCH] arm64: dts: allwinner: h6: Add SCPI protocol
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -88,6 +88,13 @@
method = "smc";
};
+ scpi_protocol: scpi {
+ compatible = "arm,scpi";
+ mboxes = <&msgbox 2>, <&msgbox 3>;
+ mbox-names = "tx", "rx";
+ shmem = <&scpi_sram>;
+ };
+
timer {
compatible = "arm,armv8-timer";
arm,no-tick-in-suspend;
@@ -196,6 +203,19 @@
#size-cells = <1>;
ranges;
+ sram_a2: sram@100000 {
+ compatible = "mmio-sram";
+ reg = <0x00100000 0x18000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00100000 0x18000>;
+
+ scpi_sram: scpi-sram@17c00 {
+ compatible = "arm,scp-shmem";
+ reg = <0x17c00 0x200>;
+ };
+ };
+
sram_c: sram@28000 {
compatible = "mmio-sram";
reg = <0x00028000 0x1e000>;

View File

@ -0,0 +1,26 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@gmail.com>
Date: Wed, 12 Oct 2022 23:01:04 +0200
Subject: [PATCH] arm64: dts: allwinner: h6: Fix Cedrus IOMMU, again
Cedrus actually uses two IOMMU channels. Add the second one.
Fixes: 62a8ccf3a248 ("arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index e897559d9a89..436cc2a02d1a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -172,7 +172,7 @@ video-codec@1c0e000 {
resets = <&ccu RST_BUS_VE>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
allwinner,sram = <&ve_sram 1>;
- iommus = <&iommu 3>;
+ iommus = <&iommu 1>, <&iommu 3>;
};
gpu: gpu@1800000 {

View File

@ -0,0 +1,31 @@
From c009b3b707bbde30fa6ff49ca3075160524ea7b9 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Tue, 26 May 2020 20:08:27 +0200
Subject: [PATCH 41/44] arm64: dts: h6 deinterlace
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -160,6 +160,18 @@
};
};
+ deinterlace: deinterlace@1420000 {
+ compatible = "allwinner,sun50i-h6-deinterlace";
+ reg = <0x01420000 0x2000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ <&ccu CLK_MBUS_DEINTERLACE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&iommu 2>;
+ };
+
video-codec@1c0e000 {
compatible = "allwinner,sun50i-h6-video-engine";
reg = <0x01c0e000 0x2000>;

View File

@ -0,0 +1,197 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sun, 29 Dec 2019 20:23:28 -0600
Subject: [PATCH] clk: Implement protected-clocks for all OF clock providers
This is a generic implementation of the "protected-clocks" property from
the common clock binding. It allows firmware to inform the OS about
clocks that must not be disabled while the OS is running.
This implementation comes with some caveats:
1) Clocks that have CLK_IS_CRITICAL in their init data are prepared/
enabled before they are attached to the clock tree. protected-clocks are
only protected once the clock provider is added, which is generally
after all of the clocks it provides have been registered. This leaves a
window of opportunity where something could disable or modify the clock,
such as a driver running on another CPU, or the clock core itself. There
is a comment to this effect in __clk_core_init():
/*
* Enable CLK_IS_CRITICAL clocks so newly added critical clocks
* don't get accidentally disabled when walking the orphan tree and
* reparenting clocks
*/
Similarly, these clocks will be enabled after they are first reparented,
unlike other CLK_IS_CRITICAL clocks. See the comment in
clk_core_reparent_orphans_nolock():
/*
* We need to use __clk_set_parent_before() and _after() to
* to properly migrate any prepare/enable count of the orphan
* clock. This is important for CLK_IS_CRITICAL clocks, which
* are enabled during init but might not have a parent yet.
*/
Ideally we could detect protected clocks before they are reparented, but
there are two problems with that:
a) From the clock core's perspective, hw->init is const.
b) The clock core doesn't see the device_node until __clk_register is
called on the first clock.
So the only "race-free" way to detect protected-clocks is to do it in
the middle of __clk_register, between when core->flags is initialized
and calling __clk_core_init(). That requires scanning the device tree
again for each clock, which is part of why I didn't do it that way.
2) __clk_protect needs to be idempotent, for two reasons:
a) Clocks with CLK_IS_CRITICAL in their init data are already
prepared/enabled, and we don't want to prepare/enable them again.
b) of_clk_set_defaults() is called twice for (at least some) clock
controllers registered with CLK_OF_DECLARE. It is called first in
of_clk_add_provider()/of_clk_add_hw_provider() inside clk_init_cb,
and again afterward in of_clk_init(). The second call in
of_clk_init() may be unnecessary, but verifying that would require
auditing all users of CLK_OF_DECLARE to ensure they called one of
the of_clk_add{,_hw}_provider functions.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/clk/clk-conf.c | 54 ++++++++++++++++++++++++++++++++++++++++++
drivers/clk/clk.c | 31 ++++++++++++++++++++++++
drivers/clk/clk.h | 2 ++
3 files changed, 87 insertions(+)
--- a/drivers/clk/clk-conf.c
+++ b/drivers/clk/clk-conf.c
@@ -11,6 +11,54 @@
#include <linux/of.h>
#include <linux/printk.h>
+#include "clk.h"
+
+static int __set_clk_flags(struct device_node *node)
+{
+ struct of_phandle_args clkspec;
+ struct property *prop;
+ int i, index = 0, rc;
+ const __be32 *cur;
+ struct clk *clk;
+ u32 nr_cells;
+
+ rc = of_property_read_u32(node, "#clock-cells", &nr_cells);
+ if (rc < 0) {
+ pr_err("clk: missing #clock-cells property on %pOF\n", node);
+ return rc;
+ }
+
+ clkspec.np = node;
+ clkspec.args_count = nr_cells;
+
+ of_property_for_each_u32(node, "protected-clocks", prop, cur, clkspec.args[0]) {
+ /* read the remainder of the clock specifier */
+ for (i = 1; i < nr_cells; ++i) {
+ cur = of_prop_next_u32(prop, cur, &clkspec.args[i]);
+ if (!cur) {
+ pr_err("clk: invalid value of protected-clocks"
+ " property at %pOF\n", node);
+ return -EINVAL;
+ }
+ }
+ clk = of_clk_get_from_provider(&clkspec);
+ if (IS_ERR(clk)) {
+ if (PTR_ERR(clk) != -EPROBE_DEFER)
+ pr_err("clk: couldn't get protected clock"
+ " %u for %pOF\n", index, node);
+ return PTR_ERR(clk);
+ }
+
+ rc = __clk_protect(clk);
+ if (rc < 0)
+ pr_warn("clk: failed to protect %s: %d\n",
+ __clk_get_name(clk), rc);
+ clk_put(clk);
+ index++;
+ }
+ return 0;
+}
+
static int __set_clk_parents(struct device_node *node, bool clk_supplier)
{
struct of_phandle_args clkspec;
@@ -135,6 +183,12 @@ int of_clk_set_defaults(struct device_no
if (!node)
return 0;
+ if (clk_supplier) {
+ rc = __set_clk_flags(node);
+ if (rc < 0)
+ return rc;
+ }
+
rc = __set_clk_parents(node, clk_supplier);
if (rc < 0)
return rc;
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -4271,6 +4271,37 @@ struct clk *devm_clk_hw_get_clk(struct d
EXPORT_SYMBOL_GPL(devm_clk_hw_get_clk);
/*
+ * clk-conf helpers
+ */
+
+int __clk_protect(struct clk *clk)
+{
+ struct clk_core *core = clk->core;
+ int ret = 0;
+
+ clk_prepare_lock();
+
+ /*
+ * If CLK_IS_CRITICAL was set in the clock's init data, then
+ * the clock was already prepared/enabled when it was added.
+ */
+ if (core->flags & CLK_IS_CRITICAL)
+ goto out;
+
+ core->flags |= CLK_IS_CRITICAL;
+ ret = clk_core_prepare(core);
+ if (ret)
+ goto out;
+
+ ret = clk_core_enable_lock(core);
+
+out:
+ clk_prepare_unlock();
+
+ return ret;
+}
+
+/*
* clkdev helpers
*/
--- a/drivers/clk/clk.h
+++ b/drivers/clk/clk.h
@@ -24,6 +24,7 @@ struct clk_hw *clk_find_hw(const char *d
#ifdef CONFIG_COMMON_CLK
struct clk *clk_hw_create_clk(struct device *dev, struct clk_hw *hw,
const char *dev_id, const char *con_id);
+int __clk_protect(struct clk *clk);
void __clk_put(struct clk *clk);
#else
/* All these casts to avoid ifdefs in clkdev... */
@@ -33,6 +34,7 @@ clk_hw_create_clk(struct device *dev, st
{
return (struct clk *)hw;
}
+static inline int __clk_protect(struct clk *clk) { return 0; }
static inline void __clk_put(struct clk *clk) { }
#endif

View File

@ -0,0 +1,122 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Tue, 5 Mar 2019 22:02:41 -0600
Subject: [PATCH] firmware: arm_scpi: Support unidirectional mailbox channels
Some mailbox controllers have only unidirectional channels, so we need a
pair of them for each SCPI channel. If a mbox-names property is present,
look for "rx" and "tx" mbox channels; otherwise, the existing behavior
is preserved, and a single mbox channel is used for each SCPI channel.
Note that since the mailbox framework only supports a single phandle
with each name (mbox_request_channel_byname always returns the first
one), this new mode only supports a single SCPI channel.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/firmware/arm_scpi.c | 58 +++++++++++++++++++++++++++++--------
1 file changed, 46 insertions(+), 12 deletions(-)
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -231,7 +231,8 @@ struct scpi_xfer {
struct scpi_chan {
struct mbox_client cl;
- struct mbox_chan *chan;
+ struct mbox_chan *rx_chan;
+ struct mbox_chan *tx_chan;
void __iomem *tx_payload;
void __iomem *rx_payload;
struct list_head rx_pending;
@@ -505,7 +506,7 @@ static int scpi_send_message(u8 idx, voi
msg->rx_len = rx_len;
reinit_completion(&msg->done);
- ret = mbox_send_message(scpi_chan->chan, msg);
+ ret = mbox_send_message(scpi_chan->tx_chan, msg);
if (ret < 0 || !rx_buf)
goto out;
@@ -856,8 +857,13 @@ static void scpi_free_channels(void *dat
struct scpi_drvinfo *info = data;
int i;
- for (i = 0; i < info->num_chans; i++)
- mbox_free_channel(info->channels[i].chan);
+ for (i = 0; i < info->num_chans; i++) {
+ struct scpi_chan *pchan = &info->channels[i];
+
+ if (pchan->tx_chan != pchan->rx_chan)
+ mbox_free_channel(pchan->tx_chan);
+ mbox_free_channel(pchan->rx_chan);
+ }
}
static int scpi_remove(struct platform_device *pdev)
@@ -913,6 +919,7 @@ static int scpi_probe(struct platform_de
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct scpi_drvinfo *scpi_drvinfo;
+ bool use_mbox_names = false;
scpi_drvinfo = devm_kzalloc(dev, sizeof(*scpi_drvinfo), GFP_KERNEL);
if (!scpi_drvinfo)
@@ -926,6 +933,14 @@ static int scpi_probe(struct platform_de
dev_err(dev, "no mboxes property in '%pOF'\n", np);
return -ENODEV;
}
+ if (of_get_property(dev->of_node, "mbox-names", NULL)) {
+ use_mbox_names = true;
+ if (count != 2) {
+ dev_err(dev, "need exactly 2 mboxes with mbox-names\n");
+ return -ENODEV;
+ }
+ count /= 2;
+ }
scpi_info->channels = devm_kcalloc(dev, count, sizeof(struct scpi_chan),
GFP_KERNEL);
@@ -974,15 +989,34 @@ static int scpi_probe(struct platform_de
mutex_init(&pchan->xfers_lock);
ret = scpi_alloc_xfer_list(dev, pchan);
- if (!ret) {
- pchan->chan = mbox_request_channel(cl, idx);
- if (!IS_ERR(pchan->chan))
- continue;
- ret = PTR_ERR(pchan->chan);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "failed to get channel%d err %d\n",
- idx, ret);
+ if (ret)
+ return ret;
+
+ if (use_mbox_names) {
+ pchan->rx_chan = mbox_request_channel_byname(cl, "rx");
+ if (IS_ERR(pchan->rx_chan)) {
+ ret = PTR_ERR(pchan->rx_chan);
+ goto fail;
+ }
+ pchan->tx_chan = mbox_request_channel_byname(cl, "tx");
+ if (IS_ERR(pchan->rx_chan)) {
+ ret = PTR_ERR(pchan->tx_chan);
+ goto fail;
+ }
+ } else {
+ pchan->rx_chan = mbox_request_channel(cl, idx);
+ if (IS_ERR(pchan->rx_chan)) {
+ ret = PTR_ERR(pchan->rx_chan);
+ goto fail;
+ }
+ pchan->tx_chan = pchan->rx_chan;
}
+ continue;
+
+fail:
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get channel%d err %d\n",
+ idx, ret);
return ret;
}

View File

@ -0,0 +1,29 @@
From 791849a059cce08f238491b8cae1c3d452edcda5 Mon Sep 17 00:00:00 2001
From: OpenEmbedded <oe.patch@oe>
Date: Wed, 6 Dec 2023 00:37:25 +0100
Subject: [PATCH 1/2] fix orange pi 3lts rtc on faulty boards"
---
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3-lts.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3-lts.dts
index 67f38b8a1..e3337c6f2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3-lts.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3-lts.dts
@@ -331,10 +331,10 @@ &pwm {
&r_ir {
status = "okay";
};
-
+/*
&rtc {
clocks = <&ext_osc32k>;
-};
+};*/
/delete-node/ &spi0;
--
2.43.0

View File

@ -0,0 +1,3 @@
# Optional patch for 3 lts that deactivates external 32Khz crystals and fallback to internal clock
# This fix rtc problems at the cost of clock accuracy on faulty boards
patch fix-orange-pi-3lts-rtc-on-faulty-boards.patch

View File

@ -0,0 +1,107 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@gmail.com>
Date: Fri, 14 Oct 2022 20:15:43 +0200
Subject: [PATCH] iommu/sun50i: Allow page sizes multiple of 4096
While peripheral supports only 4K page sizes, we can easily emulate
support for bigger page sizes, up to 1M. This is done by making multiple
entries in map function or clearing multiple entries in unmap.
This considerably lowers overhead.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
drivers/iommu/sun50i-iommu.c | 44 +++++++++++++++++++++---------------
1 file changed, 26 insertions(+), 18 deletions(-)
diff --git a/drivers/iommu/sun50i-iommu.c b/drivers/iommu/sun50i-iommu.c
index d7c5e9b1a087..9944266c4f58 100644
--- a/drivers/iommu/sun50i-iommu.c
+++ b/drivers/iommu/sun50i-iommu.c
@@ -593,10 +593,12 @@ static int sun50i_iommu_map(struct iommu_domain *domain, unsigned long iova,
{
struct sun50i_iommu_domain *sun50i_domain = to_sun50i_domain(domain);
struct sun50i_iommu *iommu = sun50i_domain->iommu;
- u32 pte_index;
+ u32 pte_index, pages, i;
u32 *page_table, *pte_addr;
int ret = 0;
+ pages = size / SPAGE_SIZE;
+
page_table = sun50i_dte_get_page_table(sun50i_domain, iova, gfp);
if (IS_ERR(page_table)) {
ret = PTR_ERR(page_table);
@@ -604,18 +606,21 @@ static int sun50i_iommu_map(struct iommu_domain *domain, unsigned long iova,
}
pte_index = sun50i_iova_get_pte_index(iova);
- pte_addr = &page_table[pte_index];
- if (unlikely(sun50i_pte_is_page_valid(*pte_addr))) {
- phys_addr_t page_phys = sun50i_pte_get_page_address(*pte_addr);
- dev_err(iommu->dev,
- "iova %pad already mapped to %pa cannot remap to %pa prot: %#x\n",
- &iova, &page_phys, &paddr, prot);
- ret = -EBUSY;
- goto out;
+ for (i = 0; i < pages; i++) {
+ pte_addr = &page_table[pte_index + i];
+ if (unlikely(sun50i_pte_is_page_valid(*pte_addr))) {
+ phys_addr_t page_phys = sun50i_pte_get_page_address(*pte_addr);
+ dev_err(iommu->dev,
+ "iova %pad already mapped to %pa cannot remap to %pa prot: %#x\n",
+ &iova, &page_phys, &paddr, prot);
+ ret = -EBUSY;
+ goto out;
+ }
+ *pte_addr = sun50i_mk_pte(paddr, prot);
+ paddr += SPAGE_SIZE;
}
- *pte_addr = sun50i_mk_pte(paddr, prot);
- sun50i_table_flush(sun50i_domain, pte_addr, 1);
+ sun50i_table_flush(sun50i_domain, &page_table[pte_index], pages);
out:
return ret;
@@ -626,8 +631,10 @@ static size_t sun50i_iommu_unmap(struct iommu_domain *domain, unsigned long iova
{
struct sun50i_iommu_domain *sun50i_domain = to_sun50i_domain(domain);
phys_addr_t pt_phys;
+ u32 dte, pages, i;
u32 *pte_addr;
- u32 dte;
+
+ pages = size / SPAGE_SIZE;
dte = sun50i_domain->dt[sun50i_iova_get_dte_index(iova)];
if (!sun50i_dte_is_pt_valid(dte))
@@ -636,13 +643,14 @@ static size_t sun50i_iommu_unmap(struct iommu_domain *domain, unsigned long iova
pt_phys = sun50i_dte_get_pt_address(dte);
pte_addr = (u32 *)phys_to_virt(pt_phys) + sun50i_iova_get_pte_index(iova);
- if (!sun50i_pte_is_page_valid(*pte_addr))
- return 0;
+ for (i = 0; i < pages; i++)
+ if (!sun50i_pte_is_page_valid(pte_addr[i]))
+ return 0;
- memset(pte_addr, 0, sizeof(*pte_addr));
- sun50i_table_flush(sun50i_domain, pte_addr, 1);
+ memset(pte_addr, 0, sizeof(*pte_addr) * pages);
+ sun50i_table_flush(sun50i_domain, pte_addr, pages);
- return SZ_4K;
+ return size;
}
static phys_addr_t sun50i_iommu_iova_to_phys(struct iommu_domain *domain,
@@ -828,7 +836,7 @@ static int sun50i_iommu_of_xlate(struct device *dev,
}
static const struct iommu_ops sun50i_iommu_ops = {
- .pgsize_bitmap = SZ_4K,
+ .pgsize_bitmap = 0x1ff000,
.device_group = sun50i_iommu_device_group,
.domain_alloc = sun50i_iommu_domain_alloc,
.of_xlate = sun50i_iommu_of_xlate,

View File

@ -0,0 +1,406 @@
From 59adceb6f34521c0f1a229f20ee9961269daa539 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Fri, 16 Aug 2019 16:38:21 +0200
Subject: [PATCH 38/44] mfd: Add support for AC200
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
drivers/mfd/Kconfig | 9 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/ac200.c | 150 +++++++++++++++++++++++++++
include/linux/mfd/ac200.h | 209 ++++++++++++++++++++++++++++++++++++++
4 files changed, 369 insertions(+)
create mode 100644 drivers/mfd/ac200.c
create mode 100644 include/linux/mfd/ac200.h
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -178,6 +178,15 @@ config MFD_AC100
This driver include only the core APIs. You have to select individual
components like codecs or RTC under the corresponding menus.
+config MFD_AC200
+ tristate "X-Powers AC200"
+ select MFD_CORE
+ depends on I2C
+ help
+ If you say Y here you get support for the X-Powers AC200 IC.
+ This driver include only the core APIs. You have to select individual
+ components like Ethernet PHY or RTC under the corresponding menus.
+
config MFD_AXP20X
tristate
select MFD_CORE
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -142,6 +142,7 @@ obj-$(CONFIG_MFD_DA9052_SPI) += da9052-s
obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
obj-$(CONFIG_MFD_AC100) += ac100.o
+obj-$(CONFIG_MFD_AC200) += ac200.o
obj-$(CONFIG_MFD_AXP20X) += axp20x.o
obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o
obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o
--- /dev/null
+++ b/drivers/mfd/ac200.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MFD core driver for X-Powers' AC200 IC
+ *
+ * The AC200 is a chip which is co-packaged with Allwinner H6 SoC and
+ * includes analog audio codec, analog TV encoder, ethernet PHY, eFuse
+ * and RTC.
+ *
+ * Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * Based on AC100 driver with following copyrights:
+ * Copyright (2016) Chen-Yu Tsai
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ac200.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+static const struct regmap_range_cfg ac200_range_cfg[] = {
+ {
+ .range_min = AC200_SYS_VERSION,
+ .range_max = AC200_IC_CHARA1,
+ .selector_reg = AC200_TWI_REG_ADDR_H,
+ .selector_mask = 0xff,
+ .selector_shift = 0,
+ .window_start = 0,
+ .window_len = 256,
+ }
+};
+
+static const struct regmap_config ac200_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .ranges = ac200_range_cfg,
+ .num_ranges = ARRAY_SIZE(ac200_range_cfg),
+ .max_register = AC200_IC_CHARA1,
+};
+
+static struct mfd_cell ac200_cells[] = {
+ {
+ .name = "ac200-codec",
+ .of_compatible = "x-powers,ac200-codec",
+ }, {
+ .name = "ac200-efuse",
+ .of_compatible = "x-powers,ac200-efuse",
+ }, {
+ .name = "ac200-ephy",
+ .of_compatible = "x-powers,ac200-ephy",
+ }, {
+ .name = "ac200-rtc",
+ .of_compatible = "x-powers,ac200-rtc",
+ }, {
+ .name = "ac200-tve",
+ .of_compatible = "x-powers,ac200-tve",
+ },
+};
+
+static int ac200_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &i2c->dev;
+ struct ac200_dev *ac200;
+ int ret;
+
+ ac200 = devm_kzalloc(dev, sizeof(*ac200), GFP_KERNEL);
+ if (!ac200)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, ac200);
+
+ ac200->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(ac200->clk)) {
+ ret = PTR_ERR(ac200->clk);
+ dev_err(dev, "Can't obtain the clock: %d\n", ret);
+ return ret;
+ }
+
+ ac200->regmap = devm_regmap_init_i2c(i2c, &ac200_regmap_config);
+ if (IS_ERR(ac200->regmap)) {
+ ret = PTR_ERR(ac200->regmap);
+ dev_err(dev, "Regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(ac200->clk);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(ac200->regmap, AC200_SYS_CONTROL, 0);
+ if (ret)
+ goto err;
+
+ ret = regmap_write(ac200->regmap, AC200_SYS_CONTROL, 1);
+ if (ret)
+ goto err;
+
+ ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, ac200_cells,
+ ARRAY_SIZE(ac200_cells), NULL, 0, NULL);
+ if (ret) {
+ dev_err(dev, "Failed to add MFD devices: %d\n", ret);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ clk_disable_unprepare(ac200->clk);
+ return ret;
+}
+
+void ac200_i2c_remove(struct i2c_client *i2c)
+{
+ struct ac200_dev *ac200 = i2c_get_clientdata(i2c);
+
+ regmap_write(ac200->regmap, AC200_SYS_CONTROL, 0);
+
+ clk_disable_unprepare(ac200->clk);
+}
+
+static const struct i2c_device_id ac200_ids[] = {
+ { "ac200", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, ac200_ids);
+
+static const struct of_device_id ac200_of_match[] = {
+ { .compatible = "x-powers,ac200" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ac200_of_match);
+
+static struct i2c_driver ac200_i2c_driver = {
+ .driver = {
+ .name = "ac200",
+ .of_match_table = of_match_ptr(ac200_of_match),
+ },
+ .probe = ac200_i2c_probe,
+ .remove = ac200_i2c_remove,
+ .id_table = ac200_ids,
+};
+module_i2c_driver(ac200_i2c_driver);
+
+MODULE_DESCRIPTION("MFD core driver for AC200");
+MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@siol.net>");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/include/linux/mfd/ac200.h
@@ -0,0 +1,209 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AC200 register list
+ *
+ * Copyright (C) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+#ifndef __LINUX_MFD_AC200_H
+#define __LINUX_MFD_AC200_H
+
+#include <linux/clk.h>
+#include <linux/regmap.h>
+
+/* interface registers (can be accessed from any page) */
+#define AC200_TWI_CHANGE_TO_RSB 0x3E
+#define AC200_TWI_PAD_DELAY 0xC4
+#define AC200_TWI_REG_ADDR_H 0xFE
+
+/* General registers */
+#define AC200_SYS_VERSION 0x0000
+#define AC200_SYS_CONTROL 0x0002
+#define AC200_SYS_IRQ_ENABLE 0x0004
+#define AC200_SYS_IRQ_STATUS 0x0006
+#define AC200_SYS_CLK_CTL 0x0008
+#define AC200_SYS_DLDO_OSC_CTL 0x000A
+#define AC200_SYS_PLL_CTL0 0x000C
+#define AC200_SYS_PLL_CTL1 0x000E
+#define AC200_SYS_AUDIO_CTL0 0x0010
+#define AC200_SYS_AUDIO_CTL1 0x0012
+#define AC200_SYS_EPHY_CTL0 0x0014
+#define AC200_SYS_EPHY_CTL1 0x0016
+#define AC200_SYS_TVE_CTL0 0x0018
+#define AC200_SYS_TVE_CTL1 0x001A
+
+/* Audio Codec registers */
+#define AC200_AC_SYS_CLK_CTL 0x2000
+#define AC200_SYS_MOD_RST 0x2002
+#define AC200_SYS_SAMP_CTL 0x2004
+#define AC200_I2S_CTL 0x2100
+#define AC200_I2S_CLK 0x2102
+#define AC200_I2S_FMT0 0x2104
+#define AC200_I2S_FMT1 0x2108
+#define AC200_I2S_MIX_SRC 0x2114
+#define AC200_I2S_MIX_GAIN 0x2116
+#define AC200_I2S_DACDAT_DVC 0x2118
+#define AC200_I2S_ADCDAT_DVC 0x211A
+#define AC200_AC_DAC_DPC 0x2200
+#define AC200_AC_DAC_MIX_SRC 0x2202
+#define AC200_AC_DAC_MIX_GAIN 0x2204
+#define AC200_DACA_OMIXER_CTRL 0x2220
+#define AC200_OMIXER_SR 0x2222
+#define AC200_LINEOUT_CTRL 0x2224
+#define AC200_AC_ADC_DPC 0x2300
+#define AC200_MBIAS_CTRL 0x2310
+#define AC200_ADC_MIC_CTRL 0x2320
+#define AC200_ADCMIXER_SR 0x2322
+#define AC200_ANALOG_TUNING0 0x232A
+#define AC200_ANALOG_TUNING1 0x232C
+#define AC200_AC_AGC_SEL 0x2480
+#define AC200_ADC_DAPLCTRL 0x2500
+#define AC200_ADC_DAPRCTRL 0x2502
+#define AC200_ADC_DAPLSTA 0x2504
+#define AC200_ADC_DAPRSTA 0x2506
+#define AC200_ADC_DAPLTL 0x2508
+#define AC200_ADC_DAPRTL 0x250A
+#define AC200_ADC_DAPLHAC 0x250C
+#define AC200_ADC_DAPLLAC 0x250E
+#define AC200_ADC_DAPRHAC 0x2510
+#define AC200_ADC_DAPRLAC 0x2512
+#define AC200_ADC_DAPLDT 0x2514
+#define AC200_ADC_DAPLAT 0x2516
+#define AC200_ADC_DAPRDT 0x2518
+#define AC200_ADC_DAPRAT 0x251A
+#define AC200_ADC_DAPNTH 0x251C
+#define AC200_ADC_DAPLHNAC 0x251E
+#define AC200_ADC_DAPLLNAC 0x2520
+#define AC200_ADC_DAPRHNAC 0x2522
+#define AC200_ADC_DAPRLNAC 0x2524
+#define AC200_AC_DAPHHPFC 0x2526
+#define AC200_AC_DAPLHPFC 0x2528
+#define AC200_AC_DAPOPT 0x252A
+#define AC200_AC_DAC_DAPCTRL 0x3000
+#define AC200_AC_DRC_HHPFC 0x3002
+#define AC200_AC_DRC_LHPFC 0x3004
+#define AC200_AC_DRC_CTRL 0x3006
+#define AC200_AC_DRC_LPFHAT 0x3008
+#define AC200_AC_DRC_LPFLAT 0x300A
+#define AC200_AC_DRC_RPFHAT 0x300C
+#define AC200_AC_DRC_RPFLAT 0x300E
+#define AC200_AC_DRC_LPFHRT 0x3010
+#define AC200_AC_DRC_LPFLRT 0x3012
+#define AC200_AC_DRC_RPFHRT 0x3014
+#define AC200_AC_DRC_RPFLRT 0x3016
+#define AC200_AC_DRC_LRMSHAT 0x3018
+#define AC200_AC_DRC_LRMSLAT 0x301A
+#define AC200_AC_DRC_RRMSHAT 0x301C
+#define AC200_AC_DRC_RRMSLAT 0x301E
+#define AC200_AC_DRC_HCT 0x3020
+#define AC200_AC_DRC_LCT 0x3022
+#define AC200_AC_DRC_HKC 0x3024
+#define AC200_AC_DRC_LKC 0x3026
+#define AC200_AC_DRC_HOPC 0x3028
+#define AC200_AC_DRC_LOPC 0x302A
+#define AC200_AC_DRC_HLT 0x302C
+#define AC200_AC_DRC_LLT 0x302E
+#define AC200_AC_DRC_HKI 0x3030
+#define AC200_AC_DRC_LKI 0x3032
+#define AC200_AC_DRC_HOPL 0x3034
+#define AC200_AC_DRC_LOPL 0x3036
+#define AC200_AC_DRC_HET 0x3038
+#define AC200_AC_DRC_LET 0x303A
+#define AC200_AC_DRC_HKE 0x303C
+#define AC200_AC_DRC_LKE 0x303E
+#define AC200_AC_DRC_HOPE 0x3040
+#define AC200_AC_DRC_LOPE 0x3042
+#define AC200_AC_DRC_HKN 0x3044
+#define AC200_AC_DRC_LKN 0x3046
+#define AC200_AC_DRC_SFHAT 0x3048
+#define AC200_AC_DRC_SFLAT 0x304A
+#define AC200_AC_DRC_SFHRT 0x304C
+#define AC200_AC_DRC_SFLRT 0x304E
+#define AC200_AC_DRC_MXGHS 0x3050
+#define AC200_AC_DRC_MXGLS 0x3052
+#define AC200_AC_DRC_MNGHS 0x3054
+#define AC200_AC_DRC_MNGLS 0x3056
+#define AC200_AC_DRC_EPSHC 0x3058
+#define AC200_AC_DRC_EPSLC 0x305A
+#define AC200_AC_DRC_HPFHGAIN 0x305E
+#define AC200_AC_DRC_HPFLGAIN 0x3060
+#define AC200_AC_DRC_BISTCR 0x3100
+#define AC200_AC_DRC_BISTST 0x3102
+
+/* TVE registers */
+#define AC200_TVE_CTL0 0x4000
+#define AC200_TVE_CTL1 0x4002
+#define AC200_TVE_MOD0 0x4004
+#define AC200_TVE_MOD1 0x4006
+#define AC200_TVE_DAC_CFG0 0x4008
+#define AC200_TVE_DAC_CFG1 0x400A
+#define AC200_TVE_YC_DELAY 0x400C
+#define AC200_TVE_YC_FILTER 0x400E
+#define AC200_TVE_BURST_FRQ0 0x4010
+#define AC200_TVE_BURST_FRQ1 0x4012
+#define AC200_TVE_FRONT_PORCH 0x4014
+#define AC200_TVE_BACK_PORCH 0x4016
+#define AC200_TVE_TOTAL_LINE 0x401C
+#define AC200_TVE_FIRST_ACTIVE 0x401E
+#define AC200_TVE_BLACK_LEVEL 0x4020
+#define AC200_TVE_BLANK_LEVEL 0x4022
+#define AC200_TVE_PLUG_EN 0x4030
+#define AC200_TVE_PLUG_IRQ_EN 0x4032
+#define AC200_TVE_PLUG_IRQ_STA 0x4034
+#define AC200_TVE_PLUG_STA 0x4038
+#define AC200_TVE_PLUG_DEBOUNCE 0x4040
+#define AC200_TVE_DAC_TEST 0x4042
+#define AC200_TVE_PLUG_PULSE_LEVEL 0x40F4
+#define AC200_TVE_PLUG_PULSE_START 0x40F8
+#define AC200_TVE_PLUG_PULSE_PERIOD 0x40FA
+#define AC200_TVE_IF_CTL 0x5000
+#define AC200_TVE_IF_TIM0 0x5008
+#define AC200_TVE_IF_TIM1 0x500A
+#define AC200_TVE_IF_TIM2 0x500C
+#define AC200_TVE_IF_TIM3 0x500E
+#define AC200_TVE_IF_SYNC0 0x5010
+#define AC200_TVE_IF_SYNC1 0x5012
+#define AC200_TVE_IF_SYNC2 0x5014
+#define AC200_TVE_IF_TIM4 0x5016
+#define AC200_TVE_IF_STATUS 0x5018
+
+/* EPHY registers */
+#define AC200_EPHY_CTL 0x6000
+#define AC200_EPHY_BIST 0x6002
+
+/* eFuse registers (0x8000 - 0x9FFF, layout unknown) */
+
+/* RTC registers */
+#define AC200_LOSC_CTRL0 0xA000
+#define AC200_LOSC_CTRL1 0xA002
+#define AC200_LOSC_AUTO_SWT_STA 0xA004
+#define AC200_INTOSC_CLK_PRESCAL 0xA008
+#define AC200_RTC_YY_MM_DD0 0xA010
+#define AC200_RTC_YY_MM_DD1 0xA012
+#define AC200_RTC_HH_MM_SS0 0xA014
+#define AC200_RTC_HH_MM_SS1 0xA016
+#define AC200_ALARM0_CUR_VLU0 0xA024
+#define AC200_ALARM0_CUR_VLU1 0xA026
+#define AC200_ALARM0_ENABLE 0xA028
+#define AC200_ALARM0_IRQ_EN 0xA02C
+#define AC200_ALARM0_IRQ_STA 0xA030
+#define AC200_ALARM1_WK_HH_MM_SS0 0xA040
+#define AC200_ALARM1_WK_HH_MM_SS1 0xA042
+#define AC200_ALARM1_ENABLE 0xA044
+#define AC200_ALARM1_IRQ_EN 0xA048
+#define AC200_ALARM1_IRQ_STA 0xA04C
+#define AC200_ALARM_CONFIG 0xA050
+#define AC200_LOSC_OUT_GATING 0xA060
+#define AC200_GP_DATA(x) (0xA100 + (x) * 2)
+#define AC200_RTC_DEB 0xA170
+#define AC200_GPL_HOLD_OUTPUT 0xA180
+#define AC200_VDD_RTC 0xA190
+#define AC200_IC_CHARA0 0xA1F0
+#define AC200_IC_CHARA1 0xA1F2
+
+struct ac200_dev {
+ struct clk *clk;
+ struct regmap *regmap;
+};
+
+#endif /* __LINUX_MFD_AC200_H */

View File

@ -0,0 +1,374 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@arm.com>
Date: Mon, 13 Jun 2022 17:37:19 +0100
Subject: mfd: Add support for X-Powers AC200 EPHY syscon
The X-Powers AC200 mixed signal chip contains a 100Mbit/s Ethernet PHY.
While the PHY is using the standard MDIO and MII/RMII interfaces to
the MAC, there are some registers in the AC200 that need to be setup to
make the PHY functional:
- The MDIO PHY address needs to set.
- The LED polarity needs to be configured.
- The MII interface mode needs to be set (MII or RMII).
- There is a reset line that controls the PHY operation.
- There is a clock gate that blocks or forwards the AC200's internal clock
to the PHY.
This driver here takes care of those setup needs, but does not cover the
actual PHY operation. Once the PHY is set up and enabled, it behaves like
a standard MDIO/MII controlled PHY, and can be driven by the IEEE802.3-C22
driver.
To some degree those parameters mimic the typical wired setup of a
physical PHY chip: the LED polarity, MII interface mode and PHY address
are typically configued via connecting certain pins. We use the
devicetree to learn those parameters, which depend on the board setup.
This driver is a child of the AC200 MFD parent device, and uses its
regmap and input clock. It also provides a reset and clock controller,
which the actual PHY device (node) needs to refer to. This ensures that
this PHY control device is initialised before the PHY is expected to work.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
drivers/phy/allwinner/Kconfig | 9 +
drivers/phy/allwinner/Makefile | 1 +
drivers/phy/allwinner/ac200-ephy-ctl.c | 301 ++++++++++
3 files changed, 311 insertions(+)
diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
index e93a53139460..d3614169de5c 100644
--- a/drivers/phy/allwinner/Kconfig
+++ b/drivers/phy/allwinner/Kconfig
@@ -58,3 +58,12 @@ config PHY_SUN50I_USB3
part of Allwinner H6 SoC.
This driver controls each individual USB 2+3 host PHY combo.
+
+config AC200_PHY_CTL
+ tristate "X-Power AC200 PHY control driver"
+ depends on MFD_AC200
+ depends on RESET_CONTROLLER
+ help
+ Enable this to support the Ethernet PHY operation of the AC200
+ mixed signal chip. This driver just enables and configures the
+ PHY, the PHY itself is supported by a standard driver.
diff --git a/drivers/phy/allwinner/Makefile b/drivers/phy/allwinner/Makefile
index bd74901a1255..0eecec7a908a 100644
--- a/drivers/phy/allwinner/Makefile
+++ b/drivers/phy/allwinner/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
obj-$(CONFIG_PHY_SUN6I_MIPI_DPHY) += phy-sun6i-mipi-dphy.o
obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
obj-$(CONFIG_PHY_SUN50I_USB3) += phy-sun50i-usb3.o
+obj-$(CONFIG_AC200_PHY_CTL) += ac200-ephy-ctl.o
diff --git a/drivers/phy/allwinner/ac200-ephy-ctl.c b/drivers/phy/allwinner/ac200-ephy-ctl.c
new file mode 100644
index 000000000000..8efeaf18e42c
--- /dev/null
+++ b/drivers/phy/allwinner/ac200-ephy-ctl.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0+
+/**
+ * syscon driver to control and configure AC200 Ethernet PHY
+ * Copyright (c) 2022 Arm Ltd.
+ *
+ * TODO's and questions:
+ * =========================
+ * - This driver is something like a syscon driver, as it controls various
+ * bits and registers that effect other devices (the actual PHY). It's
+ * unclear where it should live, though:
+ * - it could be integrated into the MFD driver, but this looks messy
+ * - it could live at the current location (drivers/phy/allwinner), but that
+ * sounds wrong
+ * - it could be a separate file, but in drivers/mfd
+ * - anything else
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+
+/* macros for system ephy control 0 register */
+#define AC200_SYS_EPHY_CTL0 0x0014
+#define AC200_EPHY_RESET_INVALID BIT(0)
+#define AC200_EPHY_SYSCLK_GATING 1
+
+/* macros for system ephy control 1 register */
+#define AC200_SYS_EPHY_CTL1 0x0016
+#define AC200_EPHY_E_EPHY_MII_IO_EN BIT(0)
+#define AC200_EPHY_E_LNK_LED_IO_EN BIT(1)
+#define AC200_EPHY_E_SPD_LED_IO_EN BIT(2)
+#define AC200_EPHY_E_DPX_LED_IO_EN BIT(3)
+
+/* macros for ephy control register */
+#define AC200_EPHY_CTL 0x6000
+#define AC200_EPHY_SHUTDOWN BIT(0)
+#define AC200_EPHY_LED_POL BIT(1)
+#define AC200_EPHY_CLK_SEL BIT(2)
+#define AC200_EPHY_ADDR(x) (((x) & 0x1F) << 4)
+#define AC200_EPHY_XMII_SEL BIT(11)
+#define AC200_EPHY_CALIB(x) (((x) & 0xF) << 12)
+
+struct ac200_ephy_ctl_dev {
+ struct reset_controller_dev rcdev;
+ struct clk_hw *gate_clk;
+ struct regmap *regmap;
+};
+
+static struct ac200_ephy_ctl_dev *to_phy_dev(struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct ac200_ephy_ctl_dev, rcdev);
+}
+
+static int ephy_ctl_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct ac200_ephy_ctl_dev *ac200 = to_phy_dev(rcdev);
+ int ret;
+
+ ret = regmap_clear_bits(ac200->regmap, AC200_SYS_EPHY_CTL0,
+ AC200_EPHY_RESET_INVALID);
+ if (ret)
+ return ret;
+
+ /* This is going via I2C, so there is plenty of built-in delay. */
+ return regmap_set_bits(ac200->regmap, AC200_SYS_EPHY_CTL0,
+ AC200_EPHY_RESET_INVALID);
+}
+
+static int ephy_ctl_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct ac200_ephy_ctl_dev *ac200 = to_phy_dev(rcdev);
+
+ return regmap_clear_bits(ac200->regmap, AC200_SYS_EPHY_CTL0,
+ AC200_EPHY_RESET_INVALID);
+}
+
+static int ephy_ctl_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct ac200_ephy_ctl_dev *ac200 = to_phy_dev(rcdev);
+
+ return regmap_set_bits(ac200->regmap, AC200_SYS_EPHY_CTL0,
+ AC200_EPHY_RESET_INVALID);
+}
+
+static int ephy_ctl_status(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct ac200_ephy_ctl_dev *ac200 = to_phy_dev(rcdev);
+
+ return regmap_test_bits(ac200->regmap, AC200_SYS_EPHY_CTL0,
+ AC200_EPHY_RESET_INVALID);
+}
+
+static int ephy_ctl_reset_of_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ if (WARN_ON(reset_spec->args_count != 0))
+ return -EINVAL;
+
+ return 0;
+}
+
+const struct reset_control_ops ephy_ctl_reset_ops = {
+ .assert = ephy_ctl_assert,
+ .deassert = ephy_ctl_deassert,
+ .reset = ephy_ctl_reset,
+ .status = ephy_ctl_status,
+};
+
+static void ac200_ephy_ctl_disable(struct ac200_ephy_ctl_dev *priv)
+{
+ regmap_write(priv->regmap, AC200_EPHY_CTL, AC200_EPHY_SHUTDOWN);
+ regmap_write(priv->regmap, AC200_SYS_EPHY_CTL1, 0);
+ regmap_write(priv->regmap, AC200_SYS_EPHY_CTL0, 0);
+}
+
+static int ac200_ephy_ctl_probe(struct platform_device *pdev)
+{
+ struct reset_controller_dev *rcdev;
+ struct device *dev = &pdev->dev;
+ struct ac200_ephy_ctl_dev *priv;
+ struct nvmem_cell *calcell;
+ const char *parent_name;
+ phy_interface_t phy_if;
+ u16 *caldata, ephy_ctl;
+ struct clk *clk;
+ size_t callen;
+ u32 value;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+
+ priv->regmap = dev_get_regmap(dev->parent, NULL);
+ if (!priv->regmap)
+ return -EPROBE_DEFER;
+
+ calcell = devm_nvmem_cell_get(dev, "calibration");
+ if (IS_ERR(calcell))
+ return dev_err_probe(dev, PTR_ERR(calcell),
+ "Unable to find calibration data!\n");
+
+ caldata = nvmem_cell_read(calcell, &callen);
+ if (IS_ERR(caldata)) {
+ dev_err(dev, "Unable to read calibration data!\n");
+ return PTR_ERR(caldata);
+ }
+
+ if (callen != 2) {
+ dev_err(dev, "Calibration data length must be 2 bytes!\n");
+ kfree(caldata);
+ return -EINVAL;
+ }
+
+ ephy_ctl = AC200_EPHY_CALIB(*caldata + 3);
+ kfree(caldata);
+
+ ret = of_get_phy_mode(dev->of_node, &phy_if);
+ if (ret) {
+ dev_err(dev, "Unable to read PHY connection mode\n");
+ return ret;
+ }
+
+ switch (phy_if) {
+ case PHY_INTERFACE_MODE_MII:
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ ephy_ctl |= AC200_EPHY_XMII_SEL;
+ break;
+ default:
+ dev_err(dev, "Illegal PHY connection mode (%d), only RMII or MII supported\n",
+ phy_if);
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32(dev->of_node, "x-powers,led-polarity",
+ &value);
+ if (ret) {
+ dev_err(dev, "Unable to read LED polarity setting\n");
+ return ret;
+ }
+
+ if (value == GPIO_ACTIVE_LOW)
+ ephy_ctl |= AC200_EPHY_LED_POL;
+
+ ret = of_property_read_u32(dev->of_node, "phy-address", &value);
+ if (ret) {
+ dev_err(dev, "Unable to read PHY address value\n");
+ return ret;
+ }
+
+ ephy_ctl |= AC200_EPHY_ADDR(value);
+
+ clk = clk_get(dev->parent, NULL);
+ if (IS_ERR(clk))
+ return dev_err_probe(dev, PTR_ERR(clk),
+ "Unable to obtain the clock\n");
+
+ if (clk_get_rate(clk) == 24000000)
+ ephy_ctl |= AC200_EPHY_CLK_SEL;
+
+ clk_put(clk);
+
+ /* Assert reset and gate clock, to disable PHY for now */
+ ret = regmap_write(priv->regmap, AC200_SYS_EPHY_CTL0, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(priv->regmap, AC200_SYS_EPHY_CTL1,
+ AC200_EPHY_E_EPHY_MII_IO_EN |
+ AC200_EPHY_E_LNK_LED_IO_EN |
+ AC200_EPHY_E_SPD_LED_IO_EN |
+ AC200_EPHY_E_DPX_LED_IO_EN);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(priv->regmap, AC200_EPHY_CTL, ephy_ctl);
+ if (ret)
+ return ret;
+
+ rcdev = &priv->rcdev;
+ rcdev->owner = dev->driver->owner;
+ rcdev->nr_resets = 1;
+ rcdev->ops = &ephy_ctl_reset_ops;
+ rcdev->of_node = dev->of_node;
+ rcdev->of_reset_n_cells = 0;
+ rcdev->of_xlate = ephy_ctl_reset_of_xlate;
+
+ ret = devm_reset_controller_register(dev, rcdev);
+ if (ret) {
+ dev_err(dev, "Unable to register reset controller: %d\n", ret);
+ goto err_disable_ephy;
+ }
+
+ parent_name = of_clk_get_parent_name(dev->parent->of_node, 0);
+ priv->gate_clk = devm_clk_hw_register_regmap_gate(dev,
+ "ac200-ephy-ctl-gate", parent_name, 0,
+ priv->regmap, AC200_SYS_EPHY_CTL0,
+ AC200_EPHY_SYSCLK_GATING, 0);
+ if (IS_ERR(priv->gate_clk)) {
+ ret = PTR_ERR(priv->gate_clk);
+ dev_err(dev, "Unable to register gate clock: %d\n", ret);
+ goto err_disable_ephy;
+ }
+
+ ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+ priv->gate_clk);
+ if (ret) {
+ dev_err(dev, "Unable to register clock provider: %d\n", ret);
+ goto err_disable_ephy;
+ }
+
+ return 0;
+
+err_disable_ephy:
+ ac200_ephy_ctl_disable(priv);
+
+ return ret;
+}
+
+static int ac200_ephy_ctl_remove(struct platform_device *pdev)
+{
+ struct ac200_ephy_ctl_dev *priv = platform_get_drvdata(pdev);
+
+ ac200_ephy_ctl_disable(priv);
+
+ return 0;
+}
+
+static const struct of_device_id ac200_ephy_ctl_match[] = {
+ { .compatible = "x-powers,ac200-ephy-ctl" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ac200_ephy_ctl_match);
+
+static struct platform_driver ac200_ephy_ctl_driver = {
+ .probe = ac200_ephy_ctl_probe,
+ .remove = ac200_ephy_ctl_remove,
+ .driver = {
+ .name = "ac200-ephy-ctl",
+ .of_match_table = ac200_ephy_ctl_match,
+ },
+};
+module_platform_driver(ac200_ephy_ctl_driver);
+
+MODULE_AUTHOR("Andre Przywara <andre.przywara@arm.com>");
+MODULE_DESCRIPTION("AC200 Ethernet PHY control driver");
+MODULE_LICENSE("GPL");
--
Armbian

View File

@ -0,0 +1,265 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Fri, 16 Aug 2019 16:38:21 +0200
Subject: mfd: Add support for X-Powers AC200
The X-Powers AC200 is a mixed signal multi-purpose chip, which provides
audio DAC/ADCs, a CVBS video encoder, a 100Mbit/s Ethernet PHY and a
real-time clock. Its control registers can be accessed via I2C or
Allwinner's RSB bus.
Beside this chip being used on some older boards (for instance the Remix
Mini PC), it is quite wide spread due to its die being co-packaged on the
Allwinner H6 and H616 SoCs, which use its audio, video and PHY
functionality.
Aside from the RTC, the other functions do not need constant
hand-holding via the I2C registers, but rather need to be configured and
enabled only once.
We model the control side of this chip using the MFD subsystem. This
driver here just provides the parent device for the various subfunctions,
and takes care of enabling clocks and reset, but also provides the regmap,
which the respective child drivers will use.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/ac200.c | 190 ++++++++++
3 files changed, 203 insertions(+)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f6b519eaaa71..39fef6420fe5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -191,6 +191,18 @@ config MFD_AC100
This driver include only the core APIs. You have to select individual
components like codecs or RTC under the corresponding menus.
+config MFD_AC200
+ tristate "X-Powers AC200"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on COMMON_CLK
+ depends on I2C
+ depends on OF
+ help
+ If you say Y here you get support for the X-Powers AC200 IC.
+ This driver include only the core APIs. You have to select individual
+ components like Ethernet PHY or codec under the corresponding menus.
+
config MFD_AXP20X
tristate
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f3d1f1dc73b5..e2ba77bd1d51 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -137,6 +137,7 @@ obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
obj-$(CONFIG_MFD_AC100) += ac100.o
+obj-$(CONFIG_MFD_AC200) += ac200.o
obj-$(CONFIG_MFD_AXP20X) += axp20x.o
obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o
obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o
diff --git a/drivers/mfd/ac200.c b/drivers/mfd/ac200.c
new file mode 100644
index 000000000000..ad28c380c880
--- /dev/null
+++ b/drivers/mfd/ac200.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MFD core driver for X-Powers' AC200 IC
+ *
+ * The AC200 is a chip which is co-packaged with Allwinner H6 SoC and
+ * includes analog audio codec, analog TV encoder, ethernet PHY, eFuse
+ * and RTC.
+ *
+ * Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@gmail.com>
+ *
+ * Based on AC100 driver with following copyrights:
+ * Copyright (2016) Chen-Yu Tsai
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+struct ac200_dev {
+ struct clk *clk;
+ struct regmap *regmap;
+};
+
+#define AC200_SYS_CONTROL 0x0002
+#define AC200_SYS_BG_CTL 0x0050
+
+/* interface register (can be accessed from any page) */
+#define AC200_TWI_REG_ADDR_H 0xFE
+
+#define AC200_MAX_REG 0xA1F2
+
+static const struct regmap_range_cfg ac200_range_cfg[] = {
+ {
+ .range_max = AC200_MAX_REG,
+ .selector_reg = AC200_TWI_REG_ADDR_H,
+ .selector_mask = 0xff,
+ .selector_shift = 0,
+ .window_start = 0,
+ .window_len = 256,
+ }
+};
+
+static const struct regmap_config ac200_regmap_config = {
+ .name = "AC200",
+ .reg_bits = 8,
+ .reg_stride = 2,
+ .val_bits = 16,
+ .ranges = ac200_range_cfg,
+ .num_ranges = ARRAY_SIZE(ac200_range_cfg),
+ .max_register = AC200_MAX_REG,
+};
+
+static struct mfd_cell ac200_cells[] = {
+ {
+ .name = "ac200-codec",
+ .of_compatible = "x-powers,ac200-codec",
+ }, {
+ .name = "ac200-ephy-ctl",
+ .of_compatible = "x-powers,ac200-ephy-ctl",
+ },
+};
+
+static int ac200_i2c_probe(struct i2c_client *i2c)
+{
+ struct device *dev = &i2c->dev;
+ struct nvmem_cell *bgcell;
+ struct ac200_dev *ac200;
+ u16 *bgdata, bgval;
+ size_t bglen;
+ int ret;
+
+ ac200 = devm_kzalloc(dev, sizeof(*ac200), GFP_KERNEL);
+ if (!ac200)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, ac200);
+
+ ac200->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(ac200->clk))
+ return dev_err_probe(dev, PTR_ERR(ac200->clk),
+ "Can't obtain the clock\n");
+
+ ac200->regmap = devm_regmap_init_i2c(i2c, &ac200_regmap_config);
+ if (IS_ERR(ac200->regmap)) {
+ ret = PTR_ERR(ac200->regmap);
+ dev_err(dev, "Regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ bgcell = devm_nvmem_cell_get(dev, "bandgap");
+ if (IS_ERR(bgcell))
+ return dev_err_probe(dev, PTR_ERR(bgcell),
+ "Unable to find bandgap data!\n");
+
+ bgdata = nvmem_cell_read(bgcell, &bglen);
+ if (IS_ERR(bgdata)) {
+ dev_err(dev, "Unable to read bandgap data!\n");
+ return PTR_ERR(bgdata);
+ }
+
+ if (bglen != 2) {
+ dev_err(dev, "Invalid nvmem bandgap length!\n");
+ kfree(bgdata);
+ return -EINVAL;
+ }
+
+ bgval = *bgdata;
+ kfree(bgdata);
+
+ ret = clk_prepare_enable(ac200->clk);
+ if (ret)
+ return ret;
+
+ /*
+ * There is no documentation on how long we have to wait before
+ * executing first operation. Vendor driver sleeps for 40 ms.
+ */
+ msleep(40);
+
+ ret = regmap_write(ac200->regmap, AC200_SYS_CONTROL, 0);
+ if (ret)
+ goto err;
+
+ ret = regmap_write(ac200->regmap, AC200_SYS_CONTROL, 1);
+ if (ret)
+ goto err;
+
+ if (bgval) {
+ /* bandgap register is not documented */
+ ret = regmap_write(ac200->regmap, AC200_SYS_BG_CTL,
+ 0x8280 | bgval);
+ if (ret)
+ goto err;
+ }
+
+ ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, ac200_cells,
+ ARRAY_SIZE(ac200_cells), NULL, 0, NULL);
+ if (ret) {
+ dev_err(dev, "Failed to add MFD devices: %d\n", ret);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ clk_disable_unprepare(ac200->clk);
+ return ret;
+}
+
+static void ac200_i2c_remove(struct i2c_client *i2c)
+{
+ struct ac200_dev *ac200 = i2c_get_clientdata(i2c);
+
+ regmap_write(ac200->regmap, AC200_SYS_CONTROL, 0);
+
+ clk_disable_unprepare(ac200->clk);
+}
+
+static const struct i2c_device_id ac200_ids[] = {
+ { "ac200", },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ac200_ids);
+
+static const struct of_device_id ac200_of_match[] = {
+ { .compatible = "x-powers,ac200" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ac200_of_match);
+
+static struct i2c_driver ac200_i2c_driver = {
+ .driver = {
+ .name = "ac200",
+ .of_match_table = of_match_ptr(ac200_of_match),
+ },
+ .probe = ac200_i2c_probe,
+ .remove = ac200_i2c_remove,
+ .id_table = ac200_ids,
+};
+module_i2c_driver(ac200_i2c_driver);
+
+MODULE_DESCRIPTION("MFD core driver for AC200");
+MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@gmail.com>");
+MODULE_LICENSE("GPL v2");
--
Armbian

View File

@ -0,0 +1,60 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Alejandro=20Gonz=C3=A1lez?=
<alejandro.gonzalez.correo@gmail.com>
Date: Sun, 25 Aug 2019 17:05:58 +0200
Subject: [PATCH] mmc: sunxi: fix unusuable eMMC on some H6 boards by disabling
DDR
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Some Allwinner H6 boards have timing problems when dealing with
DDR-capable eMMC cards. These boards include the Pine H64 and Tanix TX6.
These timing problems result in out of sync communication between the
driver and the eMMC, which renders the memory unsuable for every
operation but some basic commmands, like reading the status register.
The cause of these timing problems is not yet well known, but they go
away by disabling DDR mode operation in the driver. Like on some H5
boards, it might be that the traces are not precise enough to support
these speeds. However, Jernej Skrabec compared the BSP driver with this
driver, and found that the BSP driver configures pinctrl to operate at
1.8 V when entering DDR mode (although 3.3 V operation is supported), while
the mainline kernel lacks any mechanism to switch voltages dynamically.
Finally, other possible cause might be some timing parameter that is
different on the H6 with respect to other SoCs.
Therefore, as this fix works reliably, the kernel lacks the required
dynamic pinctrl control for now and a slow eMMC is better than a not
working eMMC, just disable DDR operation for now on H6-compatible
devices.
Signed-off-by: Alejandro González <alejandro.gonzalez.correo@gmail.com>
---
drivers/mmc/host/sunxi-mmc.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -1421,14 +1421,17 @@ static int sunxi_mmc_probe(struct platfo
/*
* Some H5 devices do not have signal traces precise enough to
- * use HS DDR mode for their eMMC chips.
+ * use HS DDR mode for their eMMC chips. Other H6 devices operate
+ * unreliably on HS DDR mode, too.
*
* We still enable HS DDR modes for all the other controller
- * variants that support them.
+ * variants that support them properly.
*/
if ((host->cfg->clk_delays || host->use_new_timings) &&
!of_device_is_compatible(pdev->dev.of_node,
- "allwinner,sun50i-h5-emmc"))
+ "allwinner,sun50i-h5-emmc") &&
+ !of_device_is_compatible(pdev->dev.of_node,
+ "allwinner,sun50i-h6-emmc"))
mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR;
ret = mmc_of_parse(mmc);

View File

@ -0,0 +1,276 @@
From cbf68fb141747879e2e6c43584c1e1e3b4d77683 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Fri, 16 Aug 2019 16:38:57 +0200
Subject: [PATCH 39/44] net: phy: Add support for AC200 EPHY
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
drivers/net/phy/Kconfig | 7 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/ac200.c | 234 +++++++++++++++++++++++++++++++++++++++
3 files changed, 242 insertions(+)
create mode 100644 drivers/net/phy/ac200.c
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -63,6 +63,13 @@ config SFP
comment "MII PHY device drivers"
+config AC200_PHY
+ tristate "AC200 EPHY"
+ depends on NVMEM
+ depends on OF
+ help
+ Fast ethernet PHY as found in X-Powers AC200 multi-function device.
+
config AMD_PHY
tristate "AMD PHYs"
help
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_SFP) += sfp.o
sfp-obj-$(CONFIG_SFP) += sfp-bus.o
obj-y += $(sfp-obj-y) $(sfp-obj-m)
+obj-$(CONFIG_AC200_PHY) += ac200.o
obj-$(CONFIG_ADIN_PHY) += adin.o
obj-$(CONFIG_AMD_PHY) += amd.o
aquantia-objs += aquantia_main.o
--- /dev/null
+++ b/drivers/net/phy/ac200.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0+
+/**
+ * Driver for AC200 Ethernet PHY
+ *
+ * Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/ac200.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#define AC200_EPHY_ID 0x00441400
+#define AC200_EPHY_ID_MASK 0x0ffffff0
+
+/* macros for system ephy control 0 register */
+#define AC200_EPHY_RESET_INVALID BIT(0)
+#define AC200_EPHY_SYSCLK_GATING BIT(1)
+
+/* macros for system ephy control 1 register */
+#define AC200_EPHY_E_EPHY_MII_IO_EN BIT(0)
+#define AC200_EPHY_E_LNK_LED_IO_EN BIT(1)
+#define AC200_EPHY_E_SPD_LED_IO_EN BIT(2)
+#define AC200_EPHY_E_DPX_LED_IO_EN BIT(3)
+
+/* macros for ephy control register */
+#define AC200_EPHY_SHUTDOWN BIT(0)
+#define AC200_EPHY_LED_POL BIT(1)
+#define AC200_EPHY_CLK_SEL BIT(2)
+#define AC200_EPHY_ADDR(x) (((x) & 0x1F) << 4)
+#define AC200_EPHY_XMII_SEL BIT(11)
+#define AC200_EPHY_CALIB(x) (((x) & 0xF) << 12)
+
+struct ac200_ephy_dev {
+ struct phy_driver *ephy;
+ struct regmap *regmap;
+};
+
+static char *ac200_phy_name = "AC200 EPHY";
+
+static void disable_intelligent_ieee(struct phy_device *phydev)
+{
+ unsigned int value;
+
+ phy_write(phydev, 0x1f, 0x0100); /* switch to page 1 */
+ value = phy_read(phydev, 0x17);
+ value &= ~BIT(3); /* disable IEEE */
+ phy_write(phydev, 0x17, value);
+ phy_write(phydev, 0x1f, 0x0000); /* switch to page 0 */
+}
+
+static void disable_802_3az_ieee(struct phy_device *phydev)
+{
+ unsigned int value;
+
+ phy_write(phydev, 0xd, 0x7);
+ phy_write(phydev, 0xe, 0x3c);
+ phy_write(phydev, 0xd, BIT(14) | 0x7);
+ value = phy_read(phydev, 0xe);
+ value &= ~BIT(1);
+ phy_write(phydev, 0xd, 0x7);
+ phy_write(phydev, 0xe, 0x3c);
+ phy_write(phydev, 0xd, BIT(14) | 0x7);
+ phy_write(phydev, 0xe, value);
+
+ phy_write(phydev, 0x1f, 0x0200); /* switch to page 2 */
+ phy_write(phydev, 0x18, 0x0000);
+}
+
+static int ac200_ephy_config_init(struct phy_device *phydev)
+{
+ const struct ac200_ephy_dev *priv = phydev->drv->driver_data;
+ unsigned int value;
+ int ret;
+
+ phy_write(phydev, 0x1f, 0x0100); /* Switch to Page 1 */
+ phy_write(phydev, 0x12, 0x4824); /* Disable APS */
+
+ phy_write(phydev, 0x1f, 0x0200); /* Switch to Page 2 */
+ phy_write(phydev, 0x18, 0x0000); /* PHYAFE TRX optimization */
+
+ phy_write(phydev, 0x1f, 0x0600); /* Switch to Page 6 */
+ phy_write(phydev, 0x14, 0x708f); /* PHYAFE TX optimization */
+ phy_write(phydev, 0x13, 0xF000); /* PHYAFE RX optimization */
+ phy_write(phydev, 0x15, 0x1530);
+
+ phy_write(phydev, 0x1f, 0x0800); /* Switch to Page 6 */
+ phy_write(phydev, 0x18, 0x00bc); /* PHYAFE TRX optimization */
+
+ disable_intelligent_ieee(phydev); /* Disable Intelligent IEEE */
+ disable_802_3az_ieee(phydev); /* Disable 802.3az IEEE */
+ phy_write(phydev, 0x1f, 0x0000); /* Switch to Page 0 */
+
+ value = (phydev->interface == PHY_INTERFACE_MODE_RMII) ?
+ AC200_EPHY_XMII_SEL : 0;
+ ret = regmap_update_bits(priv->regmap, AC200_EPHY_CTL,
+ AC200_EPHY_XMII_SEL, value);
+ if (ret)
+ return ret;
+
+ /* FIXME: This is probably H6 specific */
+ value = phy_read(phydev, 0x13);
+ value |= BIT(12);
+ phy_write(phydev, 0x13, value);
+
+ return 0;
+}
+
+static const struct mdio_device_id __maybe_unused ac200_ephy_phy_tbl[] = {
+ { AC200_EPHY_ID, AC200_EPHY_ID_MASK },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(mdio, ac200_ephy_phy_tbl);
+
+static int ac200_ephy_probe(struct platform_device *pdev)
+{
+ struct ac200_dev *ac200 = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct ac200_ephy_dev *priv;
+ struct nvmem_cell *calcell;
+ struct phy_driver *ephy;
+ u16 *caldata, calib;
+ size_t callen;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ ephy = devm_kzalloc(dev, sizeof(*ephy), GFP_KERNEL);
+ if (!ephy)
+ return -ENOMEM;
+
+ calcell = devm_nvmem_cell_get(dev, "ephy_calib");
+ if (IS_ERR(calcell)) {
+ dev_err(dev, "Unable to find calibration data!\n");
+ return PTR_ERR(calcell);
+ }
+
+ caldata = nvmem_cell_read(calcell, &callen);
+ if (IS_ERR(caldata)) {
+ dev_err(dev, "Unable to read calibration data!\n");
+ return PTR_ERR(caldata);
+ }
+
+ if (callen != 2) {
+ dev_err(dev, "Calibration data has wrong length: 2 != %lu\n",
+ callen);
+ kfree(caldata);
+ return -EINVAL;
+ }
+
+ calib = *caldata + 3;
+ kfree(caldata);
+
+ ephy->phy_id = AC200_EPHY_ID;
+ ephy->phy_id_mask = AC200_EPHY_ID_MASK;
+ ephy->name = ac200_phy_name;
+ ephy->driver_data = priv;
+ ephy->soft_reset = genphy_soft_reset;
+ ephy->config_init = ac200_ephy_config_init;
+ ephy->suspend = genphy_suspend;
+ ephy->resume = genphy_resume;
+
+ priv->ephy = ephy;
+ priv->regmap = ac200->regmap;
+ platform_set_drvdata(pdev, priv);
+
+ ret = regmap_write(ac200->regmap, AC200_SYS_EPHY_CTL0,
+ AC200_EPHY_RESET_INVALID |
+ AC200_EPHY_SYSCLK_GATING);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(ac200->regmap, AC200_SYS_EPHY_CTL1,
+ AC200_EPHY_E_EPHY_MII_IO_EN |
+ AC200_EPHY_E_LNK_LED_IO_EN |
+ AC200_EPHY_E_SPD_LED_IO_EN |
+ AC200_EPHY_E_DPX_LED_IO_EN);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(ac200->regmap, AC200_EPHY_CTL,
+ AC200_EPHY_LED_POL |
+ AC200_EPHY_CLK_SEL |
+ AC200_EPHY_ADDR(1) |
+ AC200_EPHY_CALIB(calib));
+ if (ret)
+ return ret;
+
+ ret = phy_driver_register(priv->ephy, THIS_MODULE);
+ if (ret) {
+ dev_err(dev, "Unable to register phy\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ac200_ephy_remove(struct platform_device *pdev)
+{
+ struct ac200_ephy_dev *priv = platform_get_drvdata(pdev);
+
+ phy_driver_unregister(priv->ephy);
+
+ regmap_write(priv->regmap, AC200_EPHY_CTL, AC200_EPHY_SHUTDOWN);
+ regmap_write(priv->regmap, AC200_SYS_EPHY_CTL1, 0);
+ regmap_write(priv->regmap, AC200_SYS_EPHY_CTL0, 0);
+
+ return 0;
+}
+
+static const struct of_device_id ac200_ephy_match[] = {
+ { .compatible = "x-powers,ac200-ephy" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ac200_ephy_match);
+
+static struct platform_driver ac200_ephy_driver = {
+ .probe = ac200_ephy_probe,
+ .remove = ac200_ephy_remove,
+ .driver = {
+ .name = "ac200-ephy",
+ .of_match_table = ac200_ephy_match,
+ },
+};
+module_platform_driver(ac200_ephy_driver);
+
+MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@siol.net>");
+MODULE_DESCRIPTION("AC200 Ethernet PHY driver");
+MODULE_LICENSE("GPL");

View File

@ -0,0 +1,8 @@
# K metadata for orangepi lts
# version 6.1
patch Input-axp20x-pek-allow-wakeup-after-shutdown-6_1.patch
patch mfd-Add-support-for-AC200.patch
patch net-phy-Add-support-for-AC200-EPHY.patch
include orange-pi-3lts-common.scc

View File

@ -0,0 +1,8 @@
# K metadata for orangepi lts
# version 6.5
patch Input-axp20x-pek-allow-wakeup-after-shutdown-6_5.patch
patch mfd-Add-support-for-X-Powers-AC200-EPHY-syscon.patch
patch mfd-Add-support-for-X-Powers-AC200.patch
include orange-pi-3lts-common.scc

View File

@ -0,0 +1,20 @@
# Kmeta common
#
patch clk-Implement-protected-clocks-for-all-OF-clock-prov.patch
patch Revert-clk-qcom-Support-protected-clocks-property.patch
patch rtc-sun6i-Allow-RTC-wakeup-after-shutdown.patch
patch firmware-arm_scpi-Support-unidirectional-mailbox-cha.patch
patch arm64-dts-allwinner-h6-Add-SCPI-protocol.patch
patch ASoC-hdmi-codec-fix-channel-allocation.patch
patch arm64-dts-h6-deinterlace.patch
patch HACK-h6-Add-HDMI-sound-card.patch
patch arm64-dts-allwinner-h6-Add-AC200-EPHY-related-nodes.patch
patch mmc-sunxi-fix-unusuable-eMMC-on-some-H6-boards-by-di.patch
patch wip-fix-H6-4k-60.patch
patch arm64-dts-allwinner-h6-Fix-Cedrus-IOMMU-again.patch
patch iommu-sun50i-Allow-page-sizes-multiple-of-4096.patch
patch OrangePi-3-LTS-support.patch
patch arm64-dts-allwinner-Enforce-consistent-MMC-numbering.patch
kconf harware orange-pi-3lts.cfg

View File

@ -0,0 +1,5 @@
CONFIG_NVMEM_SUNXI_SID=y
CONFIG_INIT_STACK_NONE=y
CONFIG_PHY_SUN50I_USB3=y
CONFIG_AC200_PHY=m
CONFIG_MFD_AC200=m

View File

@ -0,0 +1,62 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sat, 2 Jan 2021 15:52:27 -0600
Subject: [PATCH] rtc: sun6i: Allow RTC wakeup after shutdown
Only IRQs that have enable_irq_wake() called on them can wake the system
from sleep or after it has been shut down. Currently, the RTC alarm can
only wake the system from sleep. Run the suspend callback to arm the IRQ
during the shutdown process, so the RTC alarm also works after shutdown.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/rtc/rtc-sun6i.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
@@ -641,7 +641,6 @@ static const struct rtc_class_ops sun6i_
.alarm_irq_enable = sun6i_rtc_alarm_irq_enable
};
-#ifdef CONFIG_PM_SLEEP
/* Enable IRQ wake on suspend, to wake up from RTC. */
static int sun6i_rtc_suspend(struct device *dev)
{
@@ -654,7 +653,7 @@ static int sun6i_rtc_suspend(struct devi
}
/* Disable IRQ wake on resume. */
-static int sun6i_rtc_resume(struct device *dev)
+static int __maybe_unused sun6i_rtc_resume(struct device *dev)
{
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
@@ -663,7 +662,6 @@ static int sun6i_rtc_resume(struct devic
return 0;
}
-#endif
static SIMPLE_DEV_PM_OPS(sun6i_rtc_pm_ops,
sun6i_rtc_suspend, sun6i_rtc_resume);
@@ -735,6 +733,11 @@ static int sun6i_rtc_probe(struct platfo
return 0;
}
+static void sun6i_rtc_shutdown(struct platform_device *pdev)
+{
+ sun6i_rtc_suspend(&pdev->dev);
+}
+
/*
* As far as RTC functionality goes, all models are the same. The
* datasheets claim that different models have different number of
@@ -755,6 +758,7 @@ MODULE_DEVICE_TABLE(of, sun6i_rtc_dt_ids
static struct platform_driver sun6i_rtc_driver = {
.probe = sun6i_rtc_probe,
+ .shutdown = sun6i_rtc_shutdown,
.driver = {
.name = "sun6i-rtc",
.of_match_table = sun6i_rtc_dt_ids,

View File

@ -0,0 +1,75 @@
From edc858b1d62ce5ffd8b8d10cc62425af15d48a91 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@gmail.com>
Date: Wed, 8 Dec 2021 20:42:45 +0100
Subject: [PATCH] wip: fix H6 4k@60
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 7 +++++++
drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 4 ++++
drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 2 +-
3 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index f08d0fded61f..bcd839a3ce80 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1488,6 +1488,8 @@ static int hdmi_phy_configure_dwc_hdmi_3d_tx(struct dw_hdmi *hdmi,
/* Override and disable clock termination. */
dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE,
HDMI_3D_TX_PHY_CKCALCTRL);
+ if (mpixelclock == 594000000)
+ dw_hdmi_phy_i2c_write(hdmi, 0x8006, HDMI_3D_TX_PHY_MSM_CTRL);
return 0;
}
@@ -2166,6 +2168,8 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi,
hdmi->hdmi_data.hdcp_enable = 0;
hdmi->hdmi_data.video_mode.mdataenablepolarity = true;
+ hdmi_writeb(hdmi, HDMI_FC_GCP_SET_AVMUTE, HDMI_FC_GCP);
+
/* HDMI Initialization Step B.1 */
hdmi_av_composer(hdmi, &connector->display_info, mode);
@@ -2205,6 +2209,9 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi,
hdmi_video_sample(hdmi);
hdmi_tx_hdcp_config(hdmi);
+ msleep(100);
+ hdmi_writeb(hdmi, HDMI_FC_GCP_CLEAR_AVMUTE, HDMI_FC_GCP);
+
dw_hdmi_clear_overflow(hdmi);
return 0;
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
index 1999db05bc3b..05182418efbb 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
@@ -842,6 +842,10 @@ enum {
HDMI_FC_AVICONF3_QUANT_RANGE_LIMITED = 0x00,
HDMI_FC_AVICONF3_QUANT_RANGE_FULL = 0x04,
+/* HDMI_FC_GCP */
+ HDMI_FC_GCP_SET_AVMUTE = 0x2,
+ HDMI_FC_GCP_CLEAR_AVMUTE = 0x1,
+
/* FC_DBGFORCE field values */
HDMI_FC_DBGFORCE_FORCEAUDIO = 0x10,
HDMI_FC_DBGFORCE_FORCEVIDEO = 0x1,
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index b64d93da651d..b70bc9de761f 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -90,7 +90,7 @@ static const struct dw_hdmi_mpll_config sun50i_h6_mpll_cfg[] = {
},
}, {
594000000, {
- { 0x1a40, 0x0003 },
+ { 0x1a7c, 0x0003 },
{ 0x3b4c, 0x0003 },
{ 0x5a64, 0x0003 },
},
--
2.34.1

View File

@ -0,0 +1,25 @@
From e5017f74e32f644f9c707f788b2aaf47a98b820c Mon Sep 17 00:00:00 2001
From: OpenEmbedded <oe.patch@oe>
Date: Wed, 6 Dec 2023 00:38:22 +0100
Subject: [PATCH 2/2] add uwe5622 to wireless makefile
---
drivers/net/wireless/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index a61cf6c90..455cf9296 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -2,7 +2,7 @@
#
# Makefile for the Linux Wireless network device drivers.
#
-
+obj-$(CONFIG_SPARD_WLAN_SUPPORT) += uwe5622/
obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/
obj-$(CONFIG_WLAN_VENDOR_ATH) += ath/
obj-$(CONFIG_WLAN_VENDOR_ATMEL) += atmel/
--
2.43.0

View File

@ -0,0 +1,50 @@
From 3c57b45edef027fe994cd469185f10a04f12dcd7 Mon Sep 17 00:00:00 2001
From: OpenEmbedded <oe.patch@oe>
Date: Sat, 25 Nov 2023 14:39:37 +0000
Subject: [PATCH] fix makefiles for yocto build
---
drivers/net/wireless/uwe5622/Makefile | 2 +-
drivers/net/wireless/uwe5622/unisocwcn/Makefile | 9 +++++----
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/uwe5622/Makefile b/drivers/net/wireless/uwe5622/Makefile
index d2210439f3cc..09e06defdfcf 100644
--- a/drivers/net/wireless/uwe5622/Makefile
+++ b/drivers/net/wireless/uwe5622/Makefile
@@ -2,7 +2,7 @@ obj-$(CONFIG_RK_WIFI_DEVICE_UWE5622) += unisocwcn/
obj-$(CONFIG_WLAN_UWE5622) += unisocwifi/
obj-$(CONFIG_TTY_OVERY_SDIO) += tty-sdio/
-UNISOCWCN_DIR := $(shell cd $(src)/unisocwcn/ && /bin/pwd)
+UNISOCWCN_DIR := $(dir $(realpath $(lastword $(MAKEFILE_LIST))))unisocwcn
UNISOC_BSP_INCLUDE := $(UNISOCWCN_DIR)/include
export UNISOC_BSP_INCLUDE
diff --git a/drivers/net/wireless/uwe5622/unisocwcn/Makefile b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
index 939acb5c9274..a582426995ed 100755
--- a/drivers/net/wireless/uwe5622/unisocwcn/Makefile
+++ b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
@@ -129,9 +129,10 @@ ccflags-y += -DCONFIG_WCN_BOOT
ccflags-y += -DCONFIG_WCN_UTILS
#### include path ######
-ccflags-y += -I$(src)/include/
-ccflags-y += -I$(src)/platform/
-ccflags-y += -I$(src)/platform/rf/
+local_src__ := $(dir $(realpath $(lastword $(MAKEFILE_LIST))))
+ccflags-y += -I$(local_src__)include/
+ccflags-y += -I$(local_src__)platform/
+ccflags-y += -I$(local_src__)platform/rf/
#### add cflag for Customer ######
### ---------- Hisilicon start ---------- ###
@@ -405,7 +406,7 @@ KDIR ?= $(ANDROID_PRODUCT_OUT)/obj/KERNEL_OBJ
ARCH ?= arm
CROSS_COMPILE ?= arm-histbv310-linux-
-EXTRA_CFLAGS += -I$(src)/include -D__linux__
+EXTRA_CFLAGS += -I$(local_src__)include -D__linux__
all: $(all_dependencies)

View File

@ -0,0 +1,10 @@
# Kmeta for uwe5622
# for 6.1 kernel
# source: armbian misc drivers
patch uwe5622-allwinner.patch
patch uwe5622-allwinner-bugfix.patch
include uwe5622-common.scc

View File

@ -0,0 +1,11 @@
# Kmeta for uwe5622
# patches for 6.5 & 6.6
patch uwe5622-allwinner-v6.3.patch
patch uwe5622-allwinner-bugfix-v6.3.patch
patch uwe5622-allwinner-v6.3-compilation-fix.patch
patch uwe5622-v6.4-post.patch
include uwe5622-common.scc

View File

@ -0,0 +1,6 @@
# Kmeta for uwe5622
# for kernel 6.6 only
include uwe5622-6_5.scc
patch uwe5622-v6.6-fix-tty-sdio.patch

View File

@ -0,0 +1,7 @@
# Kmeta for uwe5622
# for kernel 6.7
# simply includes 6.6 metadata
include uwe5622-6_6.scc

View File

@ -0,0 +1,47 @@
From 9a649d7ad384907ba8f62ba50a6fd7e524d8ce25 Mon Sep 17 00:00:00 2001
From: root <Gunjan Gupta>
Date: Sun, 17 Sep 2023 20:45:44 +0000
Subject: [PATCH] drivers: uwe5622: fix compilation on 6.3+ kernels
---
.../wireless/uwe5622/unisocwcn/platform/wcn_boot.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_boot.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_boot.c
index 220bac67ddd0..b243b39c2133 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_boot.c
+++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_boot.c
@@ -1371,15 +1371,13 @@ static int marlin_registsr_bt_wake(struct device *dev)
{
struct device_node *np;
int bt_wake_host_gpio, ret = 0;
- struct gpio_config config;
np = of_find_compatible_node(NULL, NULL, "allwinner,sunxi-btlpm");
if (!np) {
WCN_ERR("dts node for bt_wake not found");
return -EINVAL;
}
- bt_wake_host_gpio = of_get_named_gpio_flags(np, "bt_hostwake", 0,
- (enum of_gpio_flags *)&config);
+ bt_wake_host_gpio = of_get_named_gpio(np, "bt_hostwake", 0);
if (!gpio_is_valid(bt_wake_host_gpio)) {
WCN_ERR("bt_hostwake irq is invalid: %d\n",
bt_wake_host_gpio);
@@ -1403,11 +1401,8 @@ static int marlin_registsr_bt_wake(struct device *dev)
marlin_dev->bt_wake_host_int_num = gpio_to_irq(bt_wake_host_gpio);
- WCN_INFO("%s bt_hostwake gpio=%d mul-sel=%d pull=%d "
- "drv_level=%d data=%d intnum=%d\n",
- __func__, config.gpio, config.mul_sel, config.pull,
- config.drv_level, config.data,
- marlin_dev->bt_wake_host_int_num);
+ WCN_INFO("%s bt_hostwake gpio=%d intnum=%d\n", __func__,
+ bt_wake_host_gpio, marlin_dev->bt_wake_host_int_num);
ret = device_init_wakeup(dev, true);
if (ret < 0) {
--
2.34.1

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,18 @@
# Kmeta for uwe5622
# common patches for kernel versions 6.1, 6.5, 6.6 & 6.7
# source: armbian misc drivers
# common patches to be appliend after kernel version specific ones
patch uwe5622-warnings.patch
patch uwe5622-park-link-v6.1-post.patch
patch uwe5622-v6.1.patch
patch uwe5622-fix-setting-mac-address-for-netdev.patch
patch wireless-uwe5622-Fix-compilation-with-6.7-kernel.patch
patch wireless-uwe5622-reduce-system-load.patch
# Custom: Add driver to makefile and patch Makefiles to make it work with yocto.
patch add-uwe5622-to-wireless-makefile.patch
patch fix-makefiles-for-yocto-build.patch
kconf harware uwe5622-fragment.cfg

View File

@ -0,0 +1,35 @@
From 9211a92d07e9a43fce104f87f9d45e890257b699 Mon Sep 17 00:00:00 2001
From: pbiel <pbiel7@gmail.com>
Date: Tue, 7 Mar 2023 20:28:44 +0100
Subject: [PATCH] wireless: fix setting mac address for netdev in uwe5622
unisocwifi driver
---
drivers/net/wireless/uwe5622/unisocwifi/main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/uwe5622/unisocwifi/main.c b/drivers/net/wireless/uwe5622/unisocwifi/main.c
index 21efdf4e0..566a9a7f3 100644
--- a/drivers/net/wireless/uwe5622/unisocwifi/main.c
+++ b/drivers/net/wireless/uwe5622/unisocwifi/main.c
@@ -1356,6 +1356,7 @@ static struct sprdwl_vif *sprdwl_register_netdev(struct sprdwl_priv *priv,
struct wireless_dev *wdev;
struct sprdwl_vif *vif;
int ret;
+ u8 target_mac_addr[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 17, 0))
ndev = alloc_netdev(sizeof(*vif), name, NET_NAME_UNKNOWN, ether_setup);
@@ -1411,7 +1412,8 @@ static struct sprdwl_vif *sprdwl_register_netdev(struct sprdwl_priv *priv,
ndev->features |= NETIF_F_SG;
SET_NETDEV_DEV(ndev, wiphy_dev(priv->wiphy));
- sprdwl_set_mac_addr(vif, addr, ndev->dev_addr);
+ sprdwl_set_mac_addr(vif, addr, target_mac_addr);
+ dev_addr_set(ndev, target_mac_addr);
#ifdef CONFIG_P2P_INTF
if (type == NL80211_IFTYPE_P2P_DEVICE)
--
2.34.1

View File

@ -0,0 +1,9 @@
CONFIG_SPARD_WLAN_SUPPORT=y
CONFIG_WCN_BSP_DRIVER_BUILDIN=y
CONFIG_WLAN_UWE5621=m
CONFIG_WLAN_UWE5622=m
CONFIG_SPRDWL_NG=m
CONFIG_UNISOC_WIFI_PS=y
CONFIG_TTY_OVERY_SDIO=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_LIB_SHA256=y

View File

@ -0,0 +1,58 @@
From 67b790ecbeab3f5493dc8306e87e503e1bb7bcdc Mon Sep 17 00:00:00 2001
From: Paolo Sabatino <paolo.sabatino@gmail.com>
Date: Sun, 29 Jan 2023 13:43:27 +0000
Subject: [PATCH] fix spreadtrum (sprd) bluetooth broken park link status
---
drivers/bluetooth/hci_ldisc.c | 6 ++++++
include/net/bluetooth/hci.h | 6 ++++++
net/bluetooth/hci_sync.c | 2 +-
3 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
--- a/drivers/bluetooth/hci_ldisc.c (revision 58aa050aa57333b34b358234002121c59fb3af26)
+++ b/drivers/bluetooth/hci_ldisc.c (revision bf8ab2f58b21494ffde96979431a3da931deb48b)
@@ -658,6 +658,12 @@
hdev->setup = hci_uart_setup;
SET_HCIDEV_DEV(hdev, hu->tty->dev);
+ // Set the broken Park link status quirk, specific for spreadtrum (sprd)
+ // bluetooth devices
+ if (hdev->manufacturer == 0xffff && hu->tty->driver &&
+ strncmp(hu->tty->driver->name, "ttyBT", 5) == 0)
+ set_bit(HCI_QUIRK_BROKEN_PARK_LINK_STATUS, &hdev->quirks);
+
if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
--- a/include/net/bluetooth/hci.h (revision 58aa050aa57333b34b358234002121c59fb3af26)
+++ b/include/net/bluetooth/hci.h (revision bf8ab2f58b21494ffde96979431a3da931deb48b)
@@ -309,6 +309,12 @@
/* HCI device quirks */
enum {
+ /*
+ * Device declares that support Park link status, but it really
+ * does not support it and fails to initialize
+ */
+ HCI_QUIRK_BROKEN_PARK_LINK_STATUS,
+
/* When this quirk is set, the HCI Reset command is send when
* closing the transport instead of when opening it.
*
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
--- a/net/bluetooth/hci_sync.c (revision 58aa050aa57333b34b358234002121c59fb3af26)
+++ b/net/bluetooth/hci_sync.c (revision bf8ab2f58b21494ffde96979431a3da931deb48b)
@@ -3804,7 +3804,7 @@
link_policy |= HCI_LP_HOLD;
if (lmp_sniff_capable(hdev))
link_policy |= HCI_LP_SNIFF;
- if (lmp_park_capable(hdev))
+ if (lmp_park_capable(hdev) && !test_bit(HCI_QUIRK_BROKEN_PARK_LINK_STATUS, &hdev->quirks))
link_policy |= HCI_LP_PARK;
cp.policy = cpu_to_le16(link_policy);
--
2.34.1

View File

@ -0,0 +1,65 @@
From 7c0e3b529afd31f99baf78be10b5d71d9086789a Mon Sep 17 00:00:00 2001
From: Paolo Sabatino <paolo.sabatino@gmail.com>
Date: Sun, 29 Jan 2023 15:53:20 +0000
Subject: [PATCH] port uwe5622 driver to kernel 6.1
---
drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
index 294f19e1f6c..9dcdee02cb9 100755
--- a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
+++ b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
@@ -703,7 +703,7 @@ static int sprdwl_add_cipher_key(struct sprdwl_vif *vif, bool pairwise,
}
static int sprdwl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
- u8 key_index, bool pairwise,
+ int link_id, u8 key_index, bool pairwise,
const u8 *mac_addr,
struct key_params *params)
{
@@ -725,7 +725,7 @@ static int sprdwl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
}
static int sprdwl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
- u8 key_index, bool pairwise,
+ int link_id, u8 key_index, bool pairwise,
const u8 *mac_addr)
{
struct sprdwl_vif *vif = netdev_priv(ndev);
@@ -755,7 +755,7 @@ static int sprdwl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
static int sprdwl_cfg80211_set_default_key(struct wiphy *wiphy,
struct net_device *ndev,
- u8 key_index, bool unicast,
+ int link_id, u8 key_index, bool unicast,
bool multicast)
{
struct sprdwl_vif *vif = netdev_priv(ndev);
@@ -2383,7 +2383,7 @@ void sprdwl_report_connection(struct sprdwl_vif *vif,
conn_info->status == SPRDWL_ROAM_SUCCESS){
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0)
struct cfg80211_roam_info roam_info = {
- .bss = bss,
+ .links[0].bss = bss,
.req_ie = conn_info->req_ie,
.req_ie_len = conn_info->req_ie_len,
.resp_ie = conn_info->resp_ie,
--
2.34.1
diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
index 0aa765ad839..20aea5e7366 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
+++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
@@ -143,7 +143,7 @@ static int prefixcmp(const char *str, const char *prefix)
}
#if KERNEL_VERSION(3, 19, 0) <= LINUX_VERSION_CODE
-static int find_callback(struct dir_context *ctx, const char *name, int namlen,
+static bool find_callback(struct dir_context *ctx, const char *name, int namlen,
loff_t offset, u64 ino, unsigned int d_type)
#else
static int find_callback(void *ctx, const char *name, int namlen,

View File

@ -0,0 +1,34 @@
From 5b43103009736d5efff606ca40a1a693ba8a04c2 Mon Sep 17 00:00:00 2001
From: Paolo Sabatino <paolo.sabatino@gmail.com>
Date: Thu, 3 Aug 2023 10:09:46 +0200
Subject: [PATCH] fix driver for kernel 6.4
---
drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_log.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_log.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_log.c
index 1a78b5b035a4..c68d86a20fe2 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_log.c
+++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_log.c
@@ -260,7 +260,7 @@ int log_cdev_init(void)
struct wcnlog_dev *dev[WCN_LOG_MAX_MINOR] = {NULL};
WCN_DEBUG("log_cdev_init\n");
- wcnlog_class = class_create(THIS_MODULE, "slog_wcn");
+ wcnlog_class = class_create("slog_wcn");
if (IS_ERR(wcnlog_class))
return PTR_ERR(wcnlog_class);
diff --git a/drivers/net/wireless/uwe5622/tty-sdio/lpm.c b/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
index 1570676ced50..79a6d60c94e8 100644
--- a/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
+++ b/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
@@ -11,6 +11,7 @@
#include <linux/seq_file.h>
#include <linux/version.h>
#include <linux/export.h>
+#include <linux/device.h>
#include <marlin_platform.h>
#define VERSION "marlin2 V0.1"

View File

@ -0,0 +1,27 @@
From 332748a389a88f8d78c5b2c70cf5c29f7098c703 Mon Sep 17 00:00:00 2001
From: Ricardo Pardini <ricardo@pardini.net>
Date: Mon, 2 Oct 2023 16:24:12 +0200
Subject: [PATCH] wifi uwe fix uwe5622 tty-sdio
---
drivers/net/wireless/uwe5622/tty-sdio/tty.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/uwe5622/tty-sdio/tty.c b/drivers/net/wireless/uwe5622/tty-sdio/tty.c
index 6498272fc192..36fc7dd558d4 100644
--- a/drivers/net/wireless/uwe5622/tty-sdio/tty.c
+++ b/drivers/net/wireless/uwe5622/tty-sdio/tty.c
@@ -467,8 +467,8 @@ static int sdio_data_transmit(uint8_t *data, size_t count)
return mtty_write(NULL, data, count);
}
-static int mtty_write_plus(struct tty_struct *tty,
- const unsigned char *buf, int count)
+static ssize_t mtty_write_plus(struct tty_struct *tty, const u8 *buf,
+ size_t count)
{
return sitm_write(buf, count, sdio_data_transmit);
}
--
2.42.0

View File

@ -0,0 +1,206 @@
From b758478655da935b50a973b0aa2ddbc20893b789 Mon Sep 17 00:00:00 2001
From: Paolo Sabatino <paolo.sabatino@gmail.com>
Date: Sun, 12 Jun 2022 14:33:59 +0000
Subject: [PATCH] uwe5622: various warning and firmware path fixes
---
drivers/net/wireless/uwe5622/Makefile | 2 +-
.../uwe5622/unisocwcn/platform/rdc_debug.c | 4 +-
.../uwe5622/unisocwcn/platform/wcn_boot.c | 2 -
.../unisocwcn/platform/wcn_parn_parser.c | 2 +-
.../uwe5622/unisocwcn/sdio/sdiohal_ctl.c | 42 ++++++-------------
.../wireless/uwe5622/unisocwifi/cfg80211.c | 4 --
6 files changed, 17 insertions(+), 39 deletions(-)
diff --git a/drivers/net/wireless/uwe5622/Makefile b/drivers/net/wireless/uwe5622/Makefile
index 71c863c1017..d2210439f3c 100644
--- a/drivers/net/wireless/uwe5622/Makefile
+++ b/drivers/net/wireless/uwe5622/Makefile
@@ -6,5 +6,5 @@ UNISOCWCN_DIR := $(shell cd $(src)/unisocwcn/ && /bin/pwd)
UNISOC_BSP_INCLUDE := $(UNISOCWCN_DIR)/include
export UNISOC_BSP_INCLUDE
-UNISOC_FW_PATH_CONFIG := "/lib/firmware/"
+UNISOC_FW_PATH_CONFIG := "/lib/firmware/uwe5622/"
export UNISOC_FW_PATH_CONFIG
diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/rdc_debug.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/rdc_debug.c
index 86fa3b103ad..1343cb98362 100755
--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/rdc_debug.c
+++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/rdc_debug.c
@@ -41,13 +41,13 @@ static unsigned int wcn_cp2_file_max_num = UNISOC_DBG_FILENUM_DEFAULT;
*/
static unsigned int wcn_cp2_log_cover_old = 1;
/* path of config file unisoc_cp2log_config.txt */
-#define WCN_DEBUG_CFG_MAX_PATH_NUM 0
+#define WCN_DEBUG_CFG_MAX_PATH_NUM 2
static char *wcn_cp2_config_path[WCN_DEBUG_CFG_MAX_PATH_NUM] = {
"/data/unisoc_cp2log_config.txt",
"/vendor/etc/wifi/unisoc_cp2log_config.txt"
};
/* path of cp2 log and mem files. */
-#define WCN_UNISOC_DBG_MAX_PATH_NUM 0
+#define WCN_UNISOC_DBG_MAX_PATH_NUM 3
static char *wcn_unisoc_dbg_path[WCN_UNISOC_DBG_MAX_PATH_NUM] = {
UNISOC_DBG_PATH_DEFAULT,/* most of projects */
"/data", /* amlogic s905w... */
diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_boot.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_boot.c
index d82f56357f3..58b9d290f23 100755
--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_boot.c
+++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_boot.c
@@ -325,8 +325,6 @@ static struct regmap *reg_map;
#define AFC_CALI_READ_FINISH 0x12121212
#define WCN_AFC_CALI_PATH "/productinfo/wcn/tsx_bt_data.txt"
-#define BIT(nr) (1UL << (nr))
-
#ifdef CONFIG_WCN_DOWNLOAD_FIRMWARE_FROM_HEX
#define POWER_WQ_DELAYED_MS 0
#else
diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
index 9abcd326972..c1557dcce3f 100755
--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
+++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
@@ -183,7 +183,7 @@ int parse_firmware_path(char *firmware_path)
continue;
}
memset(fstab_name, 0, sizeof(fstab_name));
- strncpy(fstab_name, fstab_dir[loop], sizeof(fstab_dir[loop]));
+ strncpy(fstab_name, fstab_dir[loop], sizeof(fstab_name));
if (strlen(fstab_name) > 1)
fstab_name[strlen(fstab_name)] = '/';
iterate_dir(file1, &ctx);
diff --git a/drivers/net/wireless/uwe5622/unisocwcn/sdio/sdiohal_ctl.c b/drivers/net/wireless/uwe5622/unisocwcn/sdio/sdiohal_ctl.c
index b426bf89cd9..8000bfea378 100755
--- a/drivers/net/wireless/uwe5622/unisocwcn/sdio/sdiohal_ctl.c
+++ b/drivers/net/wireless/uwe5622/unisocwcn/sdio/sdiohal_ctl.c
@@ -9,6 +9,7 @@
#include <linux/uaccess.h>
#include <linux/version.h>
#include <linux/vmalloc.h>
+#include <linux/ktime.h>
#include <wcn_bus.h>
#include "sdiohal.h"
@@ -96,8 +97,10 @@ char *tp_tx_buf[TP_TX_BUF_CNT];
struct mchn_ops_t at_tx_ops;
struct mchn_ops_t at_rx_ops;
-struct timeval tp_tx_start_time;
-struct timeval tp_tx_stop_time;
+ktime_t tp_tx_start_time;
+ktime_t tp_tx_stop_time;
+ktime_t tp_rx_start_time;
+ktime_t tp_rx_stop_time;
int tp_tx_cnt;
int tp_tx_flag;
int tp_tx_buf_cnt = TP_TX_BUF_CNT;
@@ -222,7 +225,6 @@ static int sdiohal_throughput_tx(void)
static void sdiohal_throughput_tx_compute_time(void)
{
static signed long long times_count;
- struct timespec64 now;
if (tp_tx_flag != 1)
return;
@@ -230,17 +232,12 @@ static void sdiohal_throughput_tx_compute_time(void)
/* throughput test */
tp_tx_cnt++;
if (tp_tx_cnt % 500 == 0) {
- getnstimeofday(&now);
- tp_tx_stop_time.tv_sec = now.tv_sec;
- tp_tx_stop_time.tv_usec = now.tv_nsec/1000;
- times_count = timeval_to_ns(&tp_tx_stop_time) -
- timeval_to_ns(&tp_tx_start_time);
+ tp_tx_stop_time = ktime_get();
+ times_count = tp_tx_stop_time - tp_tx_start_time;
sdiohal_info("tx->times(500c) is %lldns, tx %d, rx %d\n",
times_count, tp_tx_cnt, rx_pop_cnt);
tp_tx_cnt = 0;
- getnstimeofday(&now);
- tp_tx_start_time.tv_sec = now.tv_sec;
- tp_tx_start_time.tv_usec = now.tv_nsec/1000;
+ tp_tx_start_time = ktime_get();
}
sdiohal_throughput_tx();
}
@@ -544,14 +541,10 @@ int at_list_tx_pop(int channel, struct mbuf_t *head,
}
int tp_rx_cnt;
-struct timeval tp_rx_start_time;
-struct timeval tp_rx_stop_time;
-struct timespec tp_tm_begin;
int at_list_rx_pop(int channel, struct mbuf_t *head,
struct mbuf_t *tail, int num)
{
- static signed long long times_count;
- struct timespec64 now;
+ ktime_t times_count;
sdiohal_debug("%s channel:%d head:%p tail:%p num:%d\n",
__func__, channel, head, tail, num);
@@ -568,19 +561,13 @@ int at_list_rx_pop(int channel, struct mbuf_t *head,
/* throughput test */
tp_rx_cnt += num;
if (tp_rx_cnt / (500*64) == 1) {
- getnstimeofday(&now);
- tp_rx_stop_time.tv_sec = now.tv_sec;
- tp_rx_stop_time.tv_usec = now.tv_nsec/1000;
- times_count = timeval_to_ns(&tp_rx_stop_time)
- - timeval_to_ns(&tp_rx_start_time);
+ tp_rx_stop_time = ktime_get();
+ times_count = tp_rx_stop_time - tp_rx_start_time;
sdiohal_info("rx->times(%dc) is %lldns, tx %d, rx %d\n",
tp_rx_cnt, times_count, tp_tx_cnt, rx_pop_cnt);
tp_rx_cnt = 0;
- getnstimeofday(&now);
- tp_rx_start_time.tv_sec = now.tv_sec;
- tp_rx_start_time.tv_usec = now.tv_nsec/1000;
+ tp_rx_start_time = ktime_get();
}
- getnstimeofday(&tp_tm_begin);
return 0;
}
@@ -834,7 +821,6 @@ static ssize_t at_cmd_write(struct file *filp,
long int long_data;
int ret;
unsigned char *send_buf = NULL;
- struct timespec64 now;
if (count > SDIOHAL_WRITE_SIZE) {
sdiohal_err("%s write size > %d\n",
@@ -1127,9 +1113,7 @@ static ssize_t at_cmd_write(struct file *filp,
__func__, tp_tx_buf_cnt, tp_tx_buf_len);
tp_tx_flag = 1;
tp_tx_cnt = 0;
- getnstimeofday(&now);
- tp_tx_start_time.tv_sec = now.tv_sec;
- tp_tx_start_time.tv_usec = now.tv_nsec/1000;
+ tp_tx_start_time = ktime_get();
if ((tp_tx_buf_cnt <= TP_TX_BUF_CNT) &&
(tp_tx_buf_len <= TP_TX_BUF_LEN)) {
sprdwcn_bus_chn_deinit(&at_tx_ops);
diff --git a/drivers/net/wireless/uwe5622/unisocwifi/wl_core.c b/drivers/net/wireless/uwe5622/unisocwifi/wl_core.c
index ad310450e79..206824604ec 100755
--- a/drivers/net/wireless/uwe5622/unisocwifi/wl_core.c
+++ b/drivers/net/wireless/uwe5622/unisocwifi/wl_core.c
@@ -628,12 +628,12 @@ static int sprdwl_probe(struct platform_device *pdev)
ret = -ENXIO;
goto err_core_create;
}
- memcpy(priv->wl_ver.kernel_ver, utsname()->release,
- strlen(utsname()->release));
- memcpy(priv->wl_ver.drv_ver, SPRDWL_DRIVER_VERSION,
- strlen(SPRDWL_DRIVER_VERSION));
- memcpy(priv->wl_ver.update, SPRDWL_UPDATE, strlen(SPRDWL_UPDATE));
- memcpy(priv->wl_ver.reserve, SPRDWL_RESERVE, strlen(SPRDWL_RESERVE));
+ strncpy(priv->wl_ver.kernel_ver, utsname()->release,
+ sizeof(priv->wl_ver.kernel_ver));
+ strncpy(priv->wl_ver.drv_ver, SPRDWL_DRIVER_VERSION,
+ sizeof(priv->wl_ver.drv_ver));
+ strncpy(priv->wl_ver.update, SPRDWL_UPDATE, sizeof(priv->wl_ver.update));
+ strncpy(priv->wl_ver.reserve, SPRDWL_RESERVE, sizeof(priv->wl_ver.reserve));
wl_info("Spreadtrum WLAN Version:");
wl_info("Kernel:%s,Driver:%s,update:%s,reserved:%s\n",
utsname()->release, SPRDWL_DRIVER_VERSION,

View File

@ -0,0 +1,33 @@
From 4cf270a8ac06021e0f6cf30790d089584cb24b67 Mon Sep 17 00:00:00 2001
From: Gunjan Gupta <viraniac@gmail.com>
Date: Sat, 23 Dec 2023 10:05:30 +0000
Subject: [PATCH] wireless: uwe5622: Fix compilation with 6.7 kernel
---
drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
index b2f9a877edce..34b2e5e4274d 100644
--- a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
+++ b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
@@ -964,9 +964,16 @@ static int sprdwl_cfg80211_start_ap(struct wiphy *wiphy,
static int sprdwl_cfg80211_change_beacon(struct wiphy *wiphy,
struct net_device *ndev,
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6, 7, 0))
+ struct cfg80211_ap_update *info)
+#else
struct cfg80211_beacon_data *beacon)
+#endif
{
struct sprdwl_vif *vif = netdev_priv(ndev);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6, 7, 0))
+ struct cfg80211_beacon_data *beacon = &(info->beacon);
+#endif
wl_ndev_log(L_DBG, ndev, "%s\n", __func__);
#ifdef DFS_MASTER
--
2.34.1

View File

@ -0,0 +1,29 @@
From 2bf93d6cfe24f56baa12f75a57b71dfc33fe322a Mon Sep 17 00:00:00 2001
From: Gunjan Gupta <viraniac@gmail.com>
Date: Tue, 2 Jan 2024 13:23:23 +0000
Subject: [PATCH] wireless: uwe5622: reduce system load
Based on https://github.com/pyavitz/debian-image-builder/commit/cbed5020641ad2d2a6c2df0a2ce68586da1b1635
---
drivers/net/wireless/uwe5622/unisocwifi/tx_msg.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/uwe5622/unisocwifi/tx_msg.c b/drivers/net/wireless/uwe5622/unisocwifi/tx_msg.c
index 40d51a7130d9..040193d3115d 100644
--- a/drivers/net/wireless/uwe5622/unisocwifi/tx_msg.c
+++ b/drivers/net/wireless/uwe5622/unisocwifi/tx_msg.c
@@ -317,7 +317,10 @@ void sprdwl_dequeue_data_list(struct mbuf_t *head, int num)
/* seam for tx_thread */
void tx_down(struct sprdwl_tx_msg *tx_msg)
{
- wait_for_completion(&tx_msg->tx_completed);
+ int ret;
+ do {
+ ret = wait_for_completion_interruptible(&tx_msg->tx_completed);
+ } while (ret == -ERESTARTSYS);
}
void tx_up(struct sprdwl_tx_msg *tx_msg)
--
2.34.1

View File

@ -21,3 +21,5 @@ SRC_URI:append:orange-pi-zero2 = " \
file://0011-dts-add-usb-to-h616.patch \
file://0012-dts-orange-pi-zero2.patch \
"
KERNEL_FEATURES:append:orange-pi-3lts = " bsp/orange-pi-3lts/orange-pi-3lts-6_1.scc bsp/uwe5622/uwe5622-6_1.scc bsp/orange-pi-3lts/fix-rtc.scc"

View File

@ -4,5 +4,9 @@ DESCRIPTION = "Mainline Longterm Linux kernel"
LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
# Board Specific features
KERNEL_FEATURES:prepend:orange-pi-3lts = " bsp/orange-pi-3lts/orange-pi-3lts-6_5.scc bsp/uwe5622/uwe5622-6_5.scc bsp/orange-pi-3lts/fix-rtc.scc"
SRC_URI[sha256sum] = "2ee24af9282b80923b2da56b70aad7df2e8ee4e3f076452e05ba66be2059b519"

View File

@ -6,3 +6,5 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
SRC_URI[sha256sum] = "818716ed13e7dba6aaeae24e3073993e260812ed128d10272e94b922ee6d3394"
KERNEL_FEATURES:prepend:orange-pi-3lts = " bsp/orange-pi-3lts/orange-pi-3lts-6_5.scc bsp/uwe5622/uwe5622-6_6.scc bsp/orange-pi-3lts/fix-rtc.scc"

View File

@ -4,7 +4,7 @@ LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/${LICENSE};md5=0ceb3372c9595f0a
S = "${WORKDIR}"
COMPATIBLE_MACHINE = "orange-pi-zero2"
COMPATIBLE_MACHINE = "(orange-pi-zero2|orange-pi-3lts)"
SRC_URI:append = " \
file://wcnmodem.bin \