mirror of
https://github.com/lxsang/meta-rpi-diya.git
synced 2024-11-08 06:28:23 +01:00
101 lines
1.8 KiB
Plaintext
101 lines
1.8 KiB
Plaintext
/*
|
|
* vc4-kms-waveshare-28dpi-overlay.dts
|
|
*/
|
|
|
|
/dts-v1/;
|
|
/plugin/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/bcm2835.h>
|
|
|
|
/ {
|
|
compatible = "brcm,bcm2835";
|
|
fragment@0 {
|
|
target = <&gpio>;
|
|
__overlay__ {
|
|
pwm_pins: pwm_pins {
|
|
brcm,pins = <18>;
|
|
brcm,function = <BCM2835_FSEL_ALT5>;
|
|
brcm,pull = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
fragment@1 {
|
|
target = <&pwm>;
|
|
frag1: __overlay__ {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm_pins>;
|
|
assigned-clock-rates = <100000000>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
fragment@2 {
|
|
target-path = "/";
|
|
__overlay__ {
|
|
//#gpio-cells = <2>;
|
|
/* Panel backlight through PWM0_0 on GPIO18 */
|
|
backlight_lvds: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 10000000>;
|
|
brightness-levels = <0 1000>;
|
|
num-interpolated-steps = <1000>;
|
|
default-brightness-level = <1000>;
|
|
};
|
|
|
|
panel: panel {
|
|
reg = <0>;
|
|
compatible = "panel-dpi";
|
|
backlight = <&backlight_lvds>;
|
|
|
|
width-mm = <154>;
|
|
height-mm = <86>;
|
|
bus-format = <0x1015>;
|
|
|
|
timing: panel-timing {
|
|
clock-frequency = <28000000>;
|
|
hactive = <480>;
|
|
hfront-porch = <26>;
|
|
hsync-len = <16>;
|
|
hback-porch = <10>;
|
|
hsync-active = <0>;
|
|
vactive = <640>;
|
|
vfront-porch = <25>;
|
|
vsync-len = <10>;
|
|
vback-porch = <16>;
|
|
vsync-active = <0>;
|
|
|
|
de-active = <1>;
|
|
pixelclk-active = <1>;
|
|
};
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&dpi_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
fragment@3 {
|
|
target = <&dpi>;
|
|
dpi_node: __overlay__ {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
|
|
/* refer to /home/pi/linux/arch/arm/boot/dts/bcm270x.dtsi
|
|
* for the pin multiplex setting
|
|
*/
|
|
pinctrl-0 = <&dpi_18bit_cpadhi_gpio0>;
|
|
|
|
port {
|
|
dpi_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
}; |