85 lines
3.0 KiB
Batchfile
85 lines
3.0 KiB
Batchfile
# default values
|
|
setenv load_addr "0x45000000"
|
|
setenv overlay_error "false"
|
|
setenv verbosity "1"
|
|
setenv rootfstype "ext4"
|
|
setenv console "both"
|
|
setenv bootlogo "false"
|
|
setenv overlay_prefix "sun50i-a64"
|
|
setenv recovery "false"
|
|
setenv recovery_image "recovery.initramfs"
|
|
|
|
# Print boot source
|
|
if test ${mmc_bootdev} -eq 0; then
|
|
echo "Booting from SD device 0"
|
|
setenv rootdev "/dev/mmcblk0p2"
|
|
else
|
|
echo "Booting from eMMC"
|
|
setenv rootdev "/dev/mmcblk2p2"
|
|
fi
|
|
|
|
echo "Boot script loaded from ${devtype}"
|
|
|
|
echo "Loading environment variables from ${devtype} ${devnum} diya-config.txt"
|
|
if test -e ${devtype} ${devnum} diya-config.txt; then
|
|
load ${devtype} ${devnum} ${load_addr} diya-config.txt
|
|
env import -t ${load_addr} ${filesize}
|
|
fi
|
|
|
|
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty0"; fi
|
|
if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
|
|
if test "${bootlogo}" = "true"; then
|
|
setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
|
|
else
|
|
setenv consoleargs "splash=verbose ${consoleargs}"
|
|
fi
|
|
|
|
# get PARTUUID of first partition on SD/eMMC it was loaded from
|
|
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
|
|
if test "${devtype}" = "mmc"; then part uuid mmc 0:2 partuuid; fi
|
|
|
|
# consoleblank=0 loglevel=${verbosity}
|
|
echo "Root dev PARTUUID is ${partuuid}"
|
|
setenv bootargs "root=PARTUUID=${partuuid} rootwait rootfstype=${rootfstype} ${consoleargs} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
|
|
|
|
|
echo "Loading kernel FDT from ${devtype} ${devnum} ${fdtfile}"
|
|
load ${devtype} ${devnum} ${fdt_addr_r} ${fdtfile}
|
|
fdt addr ${fdt_addr_r}
|
|
fdt resize 65536
|
|
for overlay_file in ${overlays}; do
|
|
if load ${devtype} ${devnum} ${load_addr} allwinner/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
|
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
|
fdt apply ${load_addr} || setenv overlay_error "true"
|
|
fi
|
|
done
|
|
|
|
if test "${overlay_error}" = "true"; then
|
|
echo "Error applying DT overlays, restoring original DT"
|
|
load ${devtype} ${devnum} ${fdt_addr_r} ${fdtfile}
|
|
fi
|
|
|
|
# if test "${ethernet_phy}" = "rtl8211f"; then
|
|
# fdt set /soc/ethernet@5020000 allwinner,rx-delay-ps <3100>
|
|
# fdt set /soc/ethernet@5020000 allwinner,tx-delay-ps <700>
|
|
# fi
|
|
|
|
# if test "${ethernet_phy}" = "yt8531c"; then
|
|
# fdt set /soc/ethernet@5020000 allwinner,rx-delay-ps <0>
|
|
# fdt set /soc/ethernet@5020000 allwinner,tx-delay-ps <600>
|
|
# fi
|
|
|
|
echo "Loading kernel from ${devtype} ${devnum} ${kernel_addr_r} Image"
|
|
load ${devtype} ${devnum} ${kernel_addr_r} Image
|
|
if test "${recovery}" = "true"; then
|
|
echo "Booting Diya in recovery mode"
|
|
load ${devtype} ${devnum} ${ramdisk_addr_r} ${recovery_image}
|
|
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
|
else
|
|
echo "Booting Diya"
|
|
booti ${kernel_addr_r} - ${fdt_addr_r}
|
|
fi
|
|
|
|
# Recompile with:
|
|
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|