# default values
setenv load_addr "0x45000000"
setenv overlay_error "false"
setenv rootdev "/dev/mmcblk1p2"
setenv verbosity "1"
setenv rootfstype "ext4"
setenv console "both"
setenv bootlogo "false"
setenv overlay_prefix "sun50i-h616"
setenv disp_mode "1920x1080p60"
setenv recovery "false"
setenv recovery_image "recovery.initramfs"

# Print boot source
itest.b *0x10028 == 0x00 && echo "U-boot loaded from SD"
itest.b *0x10028 == 0x02 && echo "U-boot loaded from eMMC or secondary SD"
itest.b *0x10028 == 0x03 && echo "U-boot loaded from SPI"

echo "Boot script loaded from ${devtype}"

if test -e ${devtype} ${devnum} config.txt; then
	load ${devtype} ${devnum} ${load_addr} config.txt
	env import -t ${load_addr} ${filesize}
fi

if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
if test "${bootlogo}" = "true"; then
        setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
else
        setenv consoleargs "splash=verbose ${consoleargs}"
fi

# get PARTUUID of first partition on SD/eMMC it was loaded from
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
if test "${devtype}" = "mmc"; then part uuid mmc 0:1 partuuid; fi

# consoleblank=0 loglevel=${verbosity}

setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} ubootpart=${partuuid} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"

# if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi

load ${devtype} ${devnum} ${fdt_addr_r} ${fdtfile}
fdt addr ${fdt_addr_r}
fdt resize 65536
for overlay_file in ${overlays}; do
	if load ${devtype} ${devnum} ${load_addr} allwinner/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
		echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
		fdt apply ${load_addr} || setenv overlay_error "true"
	fi
done

if test "${overlay_error}" = "true"; then
	echo "Error applying DT overlays, restoring original DT"
	load ${devtype} ${devnum} ${fdt_addr_r} ${fdtfile}
else
	if load ${devtype} ${devnum} ${load_addr} allwinner/overlay/${overlay_prefix}-fixup.scr; then
		echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
		source ${load_addr}
	fi
fi

if test "${ethernet_phy}" = "rtl8211f"; then
        fdt set /soc/ethernet@5020000 allwinner,rx-delay-ps <3100>
        fdt set /soc/ethernet@5020000 allwinner,tx-delay-ps <700>
fi

if test "${ethernet_phy}" = "yt8531c"; then
        fdt set /soc/ethernet@5020000 allwinner,rx-delay-ps <0>
        fdt set /soc/ethernet@5020000 allwinner,tx-delay-ps <600>
fi

load ${devtype} ${devnum} ${kernel_addr_r} Image
if test "${recovery}" = "true"; then
	load ${devtype} ${devnum} ${ramdisk_addr_r} ${recovery_image}
	booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
else
	booti ${kernel_addr_r} - ${fdt_addr_r}
fi

# Recompile with:
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr