The new modes are
MODE_rgbA
MODE_bgrA
MODE_Argb
MODE_rgbA_4444
It's binary incompatible, since the enums changed.
While at it, i removed the now unneeded KeepAlpha methods.
-> Saved ~12k of code!
* made explicit mention that alpha_plane is persistent,
so we have access to the full alpha plane data at all time.
Incremental decoding of alpha was planned for, but not
implemented. So better not dragged this constaint for now
and make the code easier until we revisit that.
Change-Id: Idaba281a6ca819965ca062d1c23329f36d90c7ff
Change the lossless signature to 0x2f
Add 1 bit indicator for 'droppable (or trivial) alpha)'.
Add 3 bit lossless version (for future extension like yuv support).
Change the sub-resolution information to 3 bits implying range [2 .. 9]
Change-Id: Ic7b8c069240bbcd326cf5d5d4cd2dde8667851e2
- Make sure alpha flag is set in case of a lossless file with VP8X chunk.
The semantic of ALPHA_FLAG changes with this: it means the images
contain alpha (rather than ALPH chunk in particular).
- Update the mux container spec to add 1-line description of alpha
flag.
- Rename "HasLosslessImages()" to "MuxHasLosslessImages()", and other
similar function renames.
- Rename FeatureFlags to WebPFeatureFlags
- Elaborated a comment for a special case.
- A misc comment fix.
Change-Id: If212ccf4338c125b4c71c10bf281a51b3ba7ff45
- Separate out 'CHUNK_INDEX' from 'TAG_ID' (this is to help with the
situation where two different tags - "VP8 " and "VP8L" can have the
same TAG_ID -> IMAGE_ID).
- Some internal methods now take 'CHUNK_INDEX' param instea of 'TAG_ID'
as appropriate.
- Add kChunks[] entry for lossless.
- Rename WebPMuxImage.vp8_ --> WebPMuxImage.img_
- SetImage() and AddFrame/Tile() infer whether the bitstream is a
lossless one based on LOSSLESS_MAGIC_BYTE. The correct tag is stored
based on this.
Also, handle the case when GetVP8Info/GetVP8LInfo() fails.
Change-Id: I6b3bc9555cedb791b43f743b5a7770958864bb05
group like parameters together in prototypes, comments, move variable
declarations closer to first use.
Change-Id: Idd6bd87d0366d783fed83f4dd21bd7968cbe6948
- remove some unused functions
- move global arrays from data to read only section
- explicitly cast malloc returns; not specifically necessary, but helps
show intent
- miscellaneous formatting
Change-Id: Ib15fe5b37fe6c29c369ad928bdc3a7290cd13c84
These will report the 7x7-averaged PSNR or SSIM, using the
new internal function WebPPictureDistortion().
This is for information only. These flags have no encoding impact.
+misc opportunistic cosmetics
Change-Id: I64c0a7eca679134d39062e438886274b22bb643f
to 'clean up' the fully-transparent area and make it more compressible
new cwebp flags: -alpha_cleanup (off by default, since gain is not 100% guaranteed)
Change-Id: I74d77e1915eee146584cd61c9c1132a41db922eb
.. where only 2 filtering modes are potentially
tried, instead of all of them. This is fast than the exhaustive 'best'
mode, and not much worse.
Options for cwebp are:
-alpha_filter none
-alpha_filter fast (<- default)
-alpha_filter best (<- slow)
Change-Id: I8cb90ee11b8f981811e013ea4ad5bf72ba3ea7d4
Add predictive filtering option for Alpha plane.
Valid range for filter option is [0, 5] corresponding to prediction
methods none, horizontal, vertical, gradient & paeth filter.
The prediction method 5 will try all the prediction methods (0 to 4)
and pick the prediction method that gives best compression.
Change-Id: I9244d4a9c5017501a9696c7cec5045f04c16d49b
Extend WebP Encode functionality to encode Alpha data and produce
bit-stream (RIFF+VP8X+ALPH+VP8) corresponding to WebP-Alpha.
Change-Id: I983b4cd97be94a86a8e6d03b3b9c728db851bf48
- Add alpha support in mux.
- Remove WebPMuxAddNamedData() and WebPMuxGetNamedData() APIs. Add WebPMuxSetImage(), WebPmuxGetImage() and WebPMuxDeleteImage() APIs instead.
- Refactor code using WebPImage struct.
- Corresponding changes in webpmux binary.
- WebPMuxSetImage()/AddFrame()/AddTile() can now work with data which starts from "RIFF...". This simplifies reading a single-image webp file and adding it as an image/frame/tile in mux.
Change-Id: I7d98a6407dfe55c84a682ef7e46bc622f5a6f8d9
Changed function signature of method WebPMuxCreate and few other minor nits.
Header file has been re-organised to have declaration of set/get/Delete
methods for different use-cases (Metadata, ColorProfile etc) in one place
instead of declaring all Set methods together followed by Get & Delete.
Change-Id: I52f6dffd216b1c343423d55a5b45fa1b9b9c1347
This change adds the WebP Mux library for manipulating the WebP Mux
Container. The library document and command line tool exhibiting the
usage of this libary will follow in subsequent Git change.
Change-Id: I4cba7dd12307483185ad5a68df33af6c36c154c8
This has been pointed as a useful information to have in the header (for
the non VP8-specs savvy ones)
Change-Id: I494b1da41dfafce882a94e3677d1cd6206bc504b
Although it degrades quality, this option is useful to avoid the 512k
limit for partition #0.
If not enough to reach the lower bound of 4bits per macroblock header,
one should also limit the number of segments used (down to -segments 1)
See the man file for extra details.
Change-Id: Ia59ffac13176c85b809ddd6340d37b54ee9487ea
To be enabled with the flag WEBP_USE_THREAD.
For now it's only available on unix (pthread), when using Makefile.unix
Will be switched on more generally later.
In-loop filtering and output (=rescaling/yuv->rgb conversion)
is done in parallel to bitstream decoding, lagging 1 row behind.
Example:
examples/dwebp bryce.webp -v
Time to decode picture: 0.680s
examples/dwebp bryce.webp -v -mt
Time to decode picture: 0.515s
Change-Id: Ic30a897423137a3bdace9c4e30465ef758fe53f2
Add WEBP_EXTERN(type) macro which should make Windows DLL builds simpler
by allowing the signature to be changed.
Change-Id: I0cfa45dff779985680b1a38ddff30973a0d26639
RGB565 and ARGB4444 are only supported through the advanced decoding API.
ARGB being somewhat generic, there's an easy WebPDecodeARGB()
new function for convenience.
Patch by Vikas Arora (vikaas dot arora at gmail dot com)
Change-Id: Ic7b6f72bd70aca458d14e7fdd23679212430ebca
You can now use WebPDecBuffer, WebPBitstreamFeatures and WebPDecoderOptions
to have better control over the decoding process (and the speed/quality tradeoff).
WebPDecoderOptions allow to:
- turn fancy upsampler on/off
- turn in-loop filter on/off
- perform on-the-fly cropping
- perform on the-fly rescale
(and more to come. Not all features are implemented yet).
On-the-fly cropping and scaling allow to save quite some memory
(as the decoding operation will now scale with the output's size, not
the input's one). It saves some CPU too (since for instance,
in-loop filtering is partially turned off where it doesn't matter,
and some YUV->RGB conversion operations are ommitted too).
The scaler uses summed area, so is mainly meant to be used for
downscaling (like: for generating thumbnails or previews).
Incremental decoding works with these new options.
More doc to come soon.
dwebp is now using the new decoding interface, with the new flags:
-nofancy
-nofilter
-crop top left width height
-scale width height
Change-Id: I08baf2fa291941686f4ef70a9cc2e4137874e85e
picture->error_code can be looked up for finer error diagnose.
Added readable error messages to cwebp too.
Should close bug #75 (http://code.google.com/p/webp/issues/detail?id=75)
Change-Id: I8889d06642d90702f698cd5c27441a058ddb3636
+ add a simple rescaling function: WebPPictureRescale() for encoding
+ clean-up the memory managment around the alpha plane
+ fix some includes path by using "../webp/xxx.h" instead of "webp/xxx.h"
New flags for 'cwebp':
-resize <width> <height>
-444 (no effect)
-422 (no effect)
-400
Change-Id: I25a95f901493f939c2dd789e658493b83bd1abfa
This is a (minor) bitstream change: if the 'color_space' bit is set to '1'
(which is normally an undefined/invalid behaviour), we add extra data at the
end of partition #0 (so-called 'extensions')
Namely, we add the size of the extension data as 3 bytes (little-endian),
followed by a set of bits telling which extensions we're incorporating.
The data then _preceeds_ this trailing tags.
This is all experimental, and you'll need to have
'#define WEBP_EXPERIMENTAL_FEATURES' in webp/types.h to enable this code
(at your own risk! :))
Still, this hack produces almost-valid WebP file for decoders that don't
check this color_space bit. In particular, previous 'dwebp' (and for instance
Chrome) will recognize this files and decode them, but without the alpha
of course. Other decoder will just see random extra stuff at the end of
partition #0.
To experiment with the alpha-channel, you need to compile on Unix platform
and use PNGs for input/output.
If 'alpha.png' is a source with alpha channel, then you can try (on Unix):
cwebp alpha.png -o alpha.webp
dwebp alpha.webp -o test.png
cwebp now has a '-noalpha' flag to ignore any alpha information from the
source, if present.
More hacking and experimenting welcome!
Change-Id: I3c7b1fd8411c9e7a9f77690e898479ad85c52f3e
going down to strict -ansi c89 is quite overkill (no 'inline',
and /* */-style comments).
But with these fixes, the code compiles with the stringent flags:
-Wextra -Wold-style-definition -Wmissing-prototypes
-Wmissing-declarations and -Wdeclaration-after-statement
Change-Id: I36222f8f505bcba3d9d1309ad98b5ccb04ec17e3
WebPGetDecoderVersion() and WebPGetEncoderVersion()
will not return 0.1.2 encoded as 0x000102
dwebp and cwebp also have a new "-version" flag
Change-Id: I4fb4b5a8fc4e53681a386ff4b74fffb639fa237a
The object WebPIDecoder is available to store the
decoding state. The flow is typically:
WebPIDecoder* const idec = WebPINew(mode);
while (has_more_data) {
// ... (get additional data)
status = WebPIAppend(idec, new_data, new_data_size);
if (status != VP8_STATUS_SUSPENDED ||
break;
}
// The above call decodes the current available buffer.
// Part of the image can now be refreshed by calling to
// WebPIDecGetRGB()/WebPIDecGetYUV() etc.
}
WebPIDelete(idec);
Doing so, one can try and decode new macroblocks everytime fresh
bytes are available.
There's two operating modes: either appending fresh bytes, or
updating the whole buffer with additional data in the end.
The latter requires less memcpy()'s
main patch by Somnath Banerjee (somnath at google.com)
Change-Id: Ie81cbd0b50f175743af06b1f964de838b9a10a4a
This will make the decoder skip the filtering process if needed,
resulting in speed-up, but also non-compliant (blocky?) output
+ Add a versioning check for VP8InitIo(), since we've adding a field to VP8Io
+ add some more error checks while at it
Change-Id: I4e9899edc24ecf8600cbb27aa4038490b7b2cef3
converts PNG & JPEG to WebP
This is an experimental early version, with lot of room
of later optimizations in both speed and quality.
Compile with the usual `./configure && make`
Command line example is examples/cwebp
Usage:
cwebp [options] -q quality input.png -o output.webp
where 'quality' is between 0 (poor) to 100 (very good).
Typical value is around 80.
More encoding options with 'cwebp -longhelp'
Change-Id: I577a94f6f622a0c44bdfa9daf1086ace89d45539
When FANCY_UPSCALING is defined, use a smoothing filter for upscaling
the U/V chroma fields. The filter used is a separable t[1 3 3 1] x [1 3 3 1]
filter. It can be easily changed in macros MIX_*.
The upscaling code reside on the thing shell between user and core
decoding (in webp.c), and not in the core decoder. As such, this smoothing
process can still be offloaded to GPU in some future and is not integral
part of the decoding process.
Coincidentaly: changed the way data is tranfered to user. For profile 2 (no
filtering), it used to be on a per-block basis. Now, for all profiles, we
emit rows of pixels (between 8 and 24 in height) when they are ready.
This makes the upscaling code much easier.
Will update the test vectors MD5 sums soon (as they'll be broken
after this change)
Change-Id: I2640ff12596cb8b843a4a376d7347447d9b9f778
