- add check for native log2 to configure
- use a common define (NOT_HAVE_LOG2) to enable use of local library
version for non-autoconf platforms without their own version,
currently msvc and android
This uses a negative (NOT_HAVE_) to simplify the ifdef
Change-Id: Id0610eed507f8bb9c5da338918112853d5c8127a
alpha information is not to be found at RIFF chunks level, not
in the VP8 bitstream (that was a tmp hack)
Change-Id: Idd1629c696b03c26f6f30650d7216f627f1761df
This speeds things up for long message, while not damaging
the stats too much for usual-sized cases
Change-Id: I3f45e28b771d701e2e1da11eb800de18c4ed12fc
- Fix the off-by-one diff when cropping with simple-filter.
- Fix a bug in incremental decoding in case of alpha.
- In VP8FinishRow(), do not decode alpha when y_start > y_end.
- Correct output of alpha channel for MODE_ARGB.
- Correct output of alpha channel for MODE_RGBA_4444.
Change-Id: I785763a2a704b973cc742ad93ffbb53699d1fc0a
Extend WebP Encode functionality to encode Alpha data and produce
bit-stream (RIFF+VP8X+ALPH+VP8) corresponding to WebP-Alpha.
Change-Id: I983b4cd97be94a86a8e6d03b3b9c728db851bf48
Extend WebP decode functionality to extract Alpha data (support ALPH
chunk) and decode the Alpha plane using Alpha (utils/alpha) core-lib.
Change-Id: I6f0ee1b189c13caba3c1dd9b681383bfd00aa212
Add code for Alpha encoding & decoding. The alpha compression is done
via backward reference counts encoded with Arithmetic encoder (TCoder).
Also provided is lossy Alpha pre-processing option via level-quantizations
using kNN heuristic.
Change-Id: Ib6b13530c1a4ab6493edcb586ad29fe242bc1766
- Add alpha support in mux.
- Remove WebPMuxAddNamedData() and WebPMuxGetNamedData() APIs. Add WebPMuxSetImage(), WebPmuxGetImage() and WebPMuxDeleteImage() APIs instead.
- Refactor code using WebPImage struct.
- Corresponding changes in webpmux binary.
- WebPMuxSetImage()/AddFrame()/AddTile() can now work with data which starts from "RIFF...". This simplifies reading a single-image webp file and adding it as an image/frame/tile in mux.
Change-Id: I7d98a6407dfe55c84a682ef7e46bc622f5a6f8d9
For odd-sized chunk-payload, there's one Byte padding at the end to make the
next chunk start at even-address. The chunk-skip logic needs to be updated to
handle such cases.
Change-Id: I8939ed07584a6195092fbe703eb0ea711fa5f153
Changed function signature of method WebPMuxCreate and few other minor nits.
Header file has been re-organised to have declaration of set/get/Delete
methods for different use-cases (Metadata, ColorProfile etc) in one place
instead of declaring all Set methods together followed by Get & Delete.
Change-Id: I52f6dffd216b1c343423d55a5b45fa1b9b9c1347
This change adds the WebP Mux library for manipulating the WebP Mux
Container. The library document and command line tool exhibiting the
usage of this libary will follow in subsequent Git change.
Change-Id: I4cba7dd12307483185ad5a68df33af6c36c154c8
- Move common defines to dec/webpi.h
- Regularize naming and parameters of various "CheckAndSkip" functions.
Also they return VP8StatusCode for clarity.
- Move WebP header/chunk parsing functions to webpi.h
- Fix a bug in static function GetFeatures()
Change-Id: Ibc3da4ba210d860551724dc40741959750d66b89
This has been pointed as a useful information to have in the header (for
the non VP8-specs savvy ones)
Change-Id: I494b1da41dfafce882a94e3677d1cd6206bc504b
CloseHandle returns non-zero on success so earlier versions would leave
'ok' with a misleading value, though the return itself was correct.
Change-Id: I21b74a59d90f7bf1b484a55f3960962e933f577b
Was getting compiler error when I included bit_writer.h from non libwebp
directory. bit_writer.h includes vp8enci.h and that uses VP8BitWriter without
having it's definition.
Change-Id: I1ca82594292979b9eb7e60e2fffb22c16768dd30
Gathers all DSP-related function (and SSE2 implementations).
Clean-up some unwanted symbolic dependencies so that webp_encode,
webp_decode and webp_dsp are truly independent libraries.
+ opportunistic clean-up:
* remove unneeded VP8DspInitTables(), now integrated in VP8DspInit()
* make consistent use of VP8GetCPUInfo() in the various DspInit() funcs
* change OUT macro to DST
uint8_t is a gcc extension which msvc similarly supports, but for
greater compatibility, and to match the change already made in
dec/vp8i.h, update the remaining bitfield to use unsigned int.
Change-Id: Id9dca470345871e00e82893255a306dfe5d3fa29
Although it degrades quality, this option is useful to avoid the 512k
limit for partition #0.
If not enough to reach the lower bound of 4bits per macroblock header,
one should also limit the number of segments used (down to -segments 1)
See the man file for extra details.
Change-Id: Ia59ffac13176c85b809ddd6340d37b54ee9487ea
was missing from the RD-computation of intra-4x4 score.
Doesn't change anything significantly, it's just More Correct.
Change-Id: I25c5b53a810d97e6fb7f98c549fd23bbe55e1bf4
with assertions enabled the code would abort in
WebPWorkerChangeState with:
Assertion `worker->status_ >= OK'
without them the code would hang in the _cond_wait.
this change makes WebPWorkerChangeState a no-op in this case.
Change-Id: Iea855568bbdef2865ae61ab54473b3a7c230e91a
To be enabled with the flag WEBP_USE_THREAD.
For now it's only available on unix (pthread), when using Makefile.unix
Will be switched on more generally later.
In-loop filtering and output (=rescaling/yuv->rgb conversion)
is done in parallel to bitstream decoding, lagging 1 row behind.
Example:
examples/dwebp bryce.webp -v
Time to decode picture: 0.680s
examples/dwebp bryce.webp -v -mt
Time to decode picture: 0.515s
Change-Id: Ic30a897423137a3bdace9c4e30465ef758fe53f2
Add WEBP_EXTERN(type) macro which should make Windows DLL builds simpler
by allowing the signature to be changed.
Change-Id: I0cfa45dff779985680b1a38ddff30973a0d26639
RGB565 and ARGB4444 are only supported through the advanced decoding API.
ARGB being somewhat generic, there's an easy WebPDecodeARGB()
new function for convenience.
Patch by Vikas Arora (vikaas dot arora at gmail dot com)
Change-Id: Ic7b6f72bd70aca458d14e7fdd23679212430ebca
~5-10% faster.
Heavy 8bit arithmetic trickery!
Patch by Somnath Banerjee (somnath at google dot com)
Change-Id: I9fd2c511d9f631e9cf4b008c46127b49fb527b47
You can now use WebPDecBuffer, WebPBitstreamFeatures and WebPDecoderOptions
to have better control over the decoding process (and the speed/quality tradeoff).
WebPDecoderOptions allow to:
- turn fancy upsampler on/off
- turn in-loop filter on/off
- perform on-the-fly cropping
- perform on the-fly rescale
(and more to come. Not all features are implemented yet).
On-the-fly cropping and scaling allow to save quite some memory
(as the decoding operation will now scale with the output's size, not
the input's one). It saves some CPU too (since for instance,
in-loop filtering is partially turned off where it doesn't matter,
and some YUV->RGB conversion operations are ommitted too).
The scaler uses summed area, so is mainly meant to be used for
downscaling (like: for generating thumbnails or previews).
Incremental decoding works with these new options.
More doc to come soon.
dwebp is now using the new decoding interface, with the new flags:
-nofancy
-nofilter
-crop top left width height
-scale width height
Change-Id: I08baf2fa291941686f4ef70a9cc2e4137874e85e
This is a temporary workaround for issue #80.
Currently dec/dsp_sse2 is not included in Makefile.vc. Simply adding it
will cause a build error, however, as cl does not support aligning
function parameters producing, e.g.,
src\dec\dsp_sse2.c(228) : error C2719: 'q1': formal parameter with
__declspec(align('16')) won't be aligned
Change-Id: Id29e6802dd29110e59c4f6d13ffa5d4793c750a0
There was 1 unneeded sample line allocated for the filter cache in of simple filtering.
+ Add an explaining comment.
Change-Id: I775a596c8b8643e773e0eade8aa341dc23fb290f
