subdirectories with more than one target can have the install targets
run in parallel with make -jN. group the shared headers in one place to
produce a common install target.
Change-Id: I1f3aa338a8ee6d681de1e5d0b2c6244d2c3d5451
Reported to eventually be 4% on ARM
(see https://code.google.com/p/webp/issues/detail?id=134 for details)
We might activate it selectively later...
Output values is not bitwise the same as the LUT-based
version, but difference is only +/-1 at max.
Change-Id: I1cc790ff4459885ed2ae2e72f31c5f3740095f07
this allows DLLs to be built under mingw and sets up a more obvious
dependency in the shared objects
Change-Id: I33e8a6132a16ca49563492438a1b3b74be9ed6a1
expands to e.g., -lpthread/-pthread, etc. if --enable-threading is used
and additional libs/flags are required
Change-Id: I8e8a7b44450bee32ddc58097e1e309d972b1092a
This is required for WebP lossy+Alpha images, where Alpha channel is taking
60-70% of the compression (CPU) cycles.
Also evaluated on 1000 PNG corpus and overall compression speed
is 15-40% better for lossy (PNG+Alpha) compression.
The pure lossless compression numbers are almost same (or little
better) with this change.
Change-Id: I9e5ae7372ed6227a9a5b64cd9cff84c747195a57
using token-buffer (that is: slightly more memory. O(output_size))
This change is ON by default. To return to previous behaviour, use
'cwebp -low_memory' or set config.low_memory to true.
Side-effect of this new mode: it forces 1 partition only (which was
default anyway), and makes some statistics about the bitstream
no longer available. cwebp will no longer report 'intra4-coeffs', etc.
This mode also doesn't work (yet) with multi-pass, and -low_memory
is currently forced for multi-pass.
also: reversed the flag: USE_TOKEN_BUFFER -> DISABLE_TOKEN_BUFFER
also: fixed the kAverageBytesPerMB estimate
Change-Id: I4ea80382038d6df4309663e0cb7bd88d9bca9cf1
When a ANMF/FRGM chunk size (read from file) is smaller than ANMF/FRGM header
size (which is constant and implicit), the parser should report an error.
Change-Id: I91d71889937f5133a97f1e83d5254cb2d7f37028
broken since:
ad25032 Merge "multi-threaded alpha encoding for lossy"
this produced an error due to an empty VP8TBuffer struct.
Change-Id: I640809d07d20092c1d660e2b59b58a62a12e4371
Also tweak the code for single image and fragmented image cases, so that
dmux->num_frames_ is always correct.
Change-Id: I31e6904222e4d96a54a0d8c8aa73d43b7a9094e7
new option: 'cwebp -mt ...'
new config flag: config.thread_level
(allowed thread_level are 0 or 1 for now. Maybe more later...)
If -mt is activated (and WEBP_USE_THREAD is used for compile), the alpha-compression
will be done in parallel to RGB coding for lossy. Can save quite a bit of latency...
Has no effect for lossless encoding.
Change-Id: I769d0bf90e7380cf99344ad62cd77277f4df5a46
It now returns ALPHA_FLAG for lossless images with alpha, that don't
have a VP8X chunk.
This is consistent with similar methods WebPMuxGetFeatures() and
WebPGetFeatures().
Change-Id: Ia3a4ca8f3e0f102f478bd33e0727ca5be98593df
larger values are still dealt with in the .cc
~5% faster encoding
Output size is slightly different (variably), because of
different floating-point calculation ordering.
Change-Id: I6ede18b09c753997cf78aa1199a807d9ddb5d4b4
-> split libraries further into decoder / encoder
-> add libwebpdecoder.a in Makefile.unix
-> make dwebp link against libwebpdecoder.a in Makefile.unix
also: in makefile.unix, pass EXTRA_FLAGS to LDFLAGS too
(otherwise, -m32 wouldn't work, e.g.)
Change-Id: Ief3da02a729dd86bbaf949ed048836716941657f
signed integer overflow behavior is undefined, split PrefixEncode() to
two branches to avoid this.
Change-Id: I6e2761d0d77f0aaceafdc4e07232e089c22beb64
* add SSE2 variant for lossless
* speed-up TransformColor calls using specialized TransformColorBlue/Red
* Fuse the Shannon Entropy calls to compute it for X and X+Y simultaneously.
This latter changes the output size a little bit.
Change-Id: Ie5df94da78bf51a58da859c9099b56340da9ec89
Simplify and re-organize the VP8L bit-reader functions
(e.g.: the 40-bit look-ahead code was helping much)
Speed-up with LBITS=64, on arm7-a:
=> before:
./dwebp_justify_24_neon -v bryce_ll.webp
Time to decode picture: 11.393s
File bryce_ll.webp can be decoded (dimensions: 11158 x 2156).
...
=> after (LBITS=64): Time to decode picture: 9.953s
making the VP8L bit-reader in 32 bit mode is going to be
harder (because we need to be able to read two symbols
at a time, each with max length 15 bits)
Change-Id: I89746fb103b87b5e2fd40a3208a6fbc584b88297
This flag will make the code use no uint64, no asm, and no fancy
trick, but instead aim at being as simple and straightforward as
possible.
Main use is to help emscripten generate proper JS code.
More code needs to be simplified later.
Also: tune the BITS values to be 24 and make use of WEBP_RIGHT_JUSTIFY
Here are the typical timing for decoding a large image:
ARM7-a:
dwebp_justify_32_neon Time to decode picture: 3.280s
dwebp_justify_24_neon Time to decode picture: 2.640s
dwebp_justify_16_neon Time to decode picture: 2.723s
dwebp_justify_8_neon Time to decode picture: 2.802s
dwebp_justify_32 Time to decode picture: 4.264s
dwebp_justify_24 Time to decode picture: 3.696s
dwebp_justify_16 Time to decode picture: 3.779s
dwebp_justify_8 Time to decode picture: 3.834s
dwebp_32_neon Time to decode picture: 4.010s
dwebp_24_neon Time to decode picture: 2.725s
dwebp_16_neon Time to decode picture: 2.852s
dwebp_8_neon Time to decode picture: 2.778s
dwebp_32 Time to decode picture: 4.587s
dwebp_24 Time to decode picture: 3.800s
dwebp_16 Time to decode picture: 3.902s
dwebp_8 Time to decode picture: 3.815s
REFERENCE (HEAD) Time to decode picture: 3.818s
x86_64:
dwebp_justify_32 Time to decode picture: 0.473s
dwebp_justify_24 Time to decode picture: 0.434s
dwebp_justify_16 Time to decode picture: 0.450s
dwebp_justify_8 Time to decode picture: 0.467s
dwebp_32 Time to decode picture: 0.474s
dwebp_24 Time to decode picture: 0.468s
dwebp_16 Time to decode picture: 0.468s
dwebp_8 Time to decode picture: 0.481s
REFERENCE (HEAD) Time to decode picture: 0.436s
i386:
dwebp_justify_32 Time to decode picture: 0.723s
dwebp_justify_24 Time to decode picture: 0.618s
dwebp_justify_16 Time to decode picture: 0.626s
dwebp_justify_8 Time to decode picture: 0.651s
dwebp_32 Time to decode picture: 0.744s
dwebp_24 Time to decode picture: 0.627s
dwebp_16 Time to decode picture: 0.642s
dwebp_8 Time to decode picture: 0.642s
Change-Id: Ie56c7235733a24f94fbfc2e4351aae36ec39c225
This option remaps internal parameters to better match
the expected compression curve of JPEG and produce output files
of similar size, but with better quality.
Change-Id: I96a1cbb480b1f6a0c6845a23c33dfd63f197b689
If it's not a partial file and parser returns PARSE_NEED_MORE_DATA, then
consider it to be PARSE_ERROR.
Change-Id: Id652a345bd2a9f574970272dd0a00517de113215
If a NULL pre-allocated buffer is passed, a buffer will be automatically
allocated.
+ add some parameter checks.
reported in http://code.google.com/p/webp/issues/detail?id=139
Change-Id: I9e14ed97db30ee12e46b5e92aac7eeaaeb99bfd5
store values to a temporary variable before calling functions that take
vector types.
removes non-standard constructs such as:
(uint8x8x2_t){{ a, b }}
fixing:
src/dsp/upsampling_neon.c:69:32: error: macro "vst2_u8" passed 3
arguments, but takes just 2
Change-Id: Ib4368e16e3a3efac18024f02be94e76243ade2dc
Fixes: https://code.google.com/p/webp/issues/detail?id=140
- along the lines of the SSE chroma upsampling.
Total speedup is ~30%.
4% speed loss on YuvToRgbXX conversion using tables instead
of 14-bit fixed precision. TODO(later): investigate, and compare
to x86.
see http://code.google.com/p/webp/issues/detail?id=134
Change-Id: Idc2261037cd13b4553ca20ecc4c4007099c37009
When the config option '--enable-libwebpdecoder' is specified, the
lean decoder library 'libwebpdecoder' will be created in addition to
libwebp. Also dwebp binary will be linked to libwebpdecoder, if this
config option is specified.
Change-Id: I9de3e149b59c9a8390fae2ba660941749640e54a
Actually, it turns out we now should never call these functions
with a zero size, otherwise something is wrong in the logic.
Change-Id: Ie414fcbec95486c169190470a71f2cff0843782a
also change lossless encoder logic, which was relying on explicit
NULL return from WebPSafeMalloc(0)
renamed function to CheckSizeArgumentsOverflow() explicitly
addresses issue #138
Change-Id: Ibbd51cc0281e60e86dfd4c5496274399e4c0f7f3
- precompute filtering strength once for all at the beginning
instead of per-macroblock
- reduce size of VP8MB struct from 8 bytes to 4.
- removed VP8StoreBlock() accordingly
Change-Id: Icf3d329473e21c464770be3d72a04c9ee4c321f2
GetCoeffs is (by far) the most consuming function of the decoder.
No speed change (unfortunately), but the main loop is somehow clearer.
Change-Id: I78f1c10cadc2c8696c041f5cbda86cab92cc6598
* treat the last coeff as a special case
* re-arrange the inner code to be shorter
* replace some VP8EncBands[n] by n, for n = 0 or 1
Change-Id: I71e17b014cffad7b073e787fde06260905a6953f
The main advantage is that you can avoid the use of uint64_t
some times, sticking to 32bit only.
Default still is BITS=32, this is mainly "in case".
Change-Id: Id694028793117ba822c37d46ef6c52fa0afed4ac
- Separate out mux.h and demux.h
- muxtypes.h: new header for data types common to mux/demux
- Move some misc read/write utilities to utils/utils.h
- Remove some duplicate methods.
- Separate out mux/demux libraries
Change-Id: If9b9569b10d55d922ad9317ef51710544315d6de
